Hi everybody, if someone could help me solving this issue, after upgrading to WM6, both cameras on my Herm100 did not work. (i even made a videocall to my other phone #, my Herm100 did receive the video but transmitted nothing)
the ugrade i used is the one one xda-developers: HTC_TyTN_ITA_3[1].54.258.2_102_6275_1.47.00.10_108.exe, following the procedures i've been reading on this site. I appreciate your work here and hope you could help me with this issue
newby_ita said:
Hi everybody, if someone could help me solving this issue, after upgrading to WM6, both cameras on my Herm100 did not work. (i even made a videocall to my other phone #, my Herm100 did receive the video but transmitted nothing)
the ugrade i used is the one one xda-developers: HTC_TyTN_ITA_3[1].54.258.2_102_6275_1.47.00.10_108.exe, following the procedures i've been reading on this site. I appreciate your work here and hope you could help me with this issue
Click to expand...
Click to collapse
can you use the back camera to take normal pictures?
no, both cameras not working, i checked if the file camera.exe is missing but it's in the windows directory, the registry seems ok, when i exec the file camera.exe nothing happens.
I just updated my phone's details in signature
I have the same problem. It only appeared a week ago while I've been using Schaps 3.54b for couple of weeks now. My back camera is working after a soft reset, but both cameras go blind after starting a video call. The camera application loads okay but the screen is totally black except for the options and other HUD. If I push the on-screen button to go to picture gallery and close it then the back camera starts working again.
I just would like to get my video calling working again. It worked with this rom originally but now something has happened and I haven't installed many applications. Any ideas?
eldis said:
I have the same problem. It only appeared a week ago while I've been using Schaps 3.54b for couple of weeks now. My back camera is working after a soft reset, but both cameras go blind after starting a video call. The camera application loads okay but the screen is totally black except for the options and other HUD. If I push the on-screen button to go to picture gallery and close it then the back camera starts working again.
I just would like to get my video calling working again. It worked with this rom originally but now something has happened and I haven't installed many applications. Any ideas?
Click to expand...
Click to collapse
this is your solution:
http://forum.xda-developers.com/showthread.php?t=316811
i guess my problem is in the software, both cameras wont work, not only the front one, neither the back one works, is it clear now?
newby_ita said:
i guess my problem is in the software, both cameras wont work, not only the front one, neither the back one works, is it clear now?
Click to expand...
Click to collapse
I would try:
1. HR
2. installing a new ROM.
3. repair...
thanks for your reply
-HR does nothing since it did not work after installing a new ROM
-installing a new ROM could help, i did it indeed, the one that worked had a green screen in camera and i did not like it
-no repair is needed since it works
any other help, maybe some camera software to download?
-I copied files for camera from another working device but I could not replace the files in mine cause the files are READONLY, any suggestions?
I really appreciate your efforts, maybe my english is so bad that i did not explain it from the beginning.
this happened to me when i upgraded to wm6, both cameras would not work ie nothing happened when I pressed the camera button or the icon, anyway after hrs of messing around it still was`nt working, so I had enough and just left the phone switched off till the next day....So next day came I tried the phone again and to my suprise the camera now works I did nothing to it but leave it switched off till the next day, now someone tell me what thats all about. not had a problem since
newby_ita said:
thanks for your reply
-HR does nothing since it did not work after installing a new ROM
-installing a new ROM could help, i did it indeed, the one that worked had a green screen in camera and i did not like it
-no repair is needed since it works
any other help, maybe some camera software to download?
-I copied files for camera from another working device but I could not replace the files in mine cause the files are READONLY, any suggestions?
I really appreciate your efforts, maybe my english is so bad that i did not explain it from the beginning.
Click to expand...
Click to collapse
sorry, didnt notice you tried it before.
to overwrite files use:
resco explorer or total commander(free)
ok, i tried using both but since the file are located in the ROM it's not possible to replace them. I think i'll have to downgrade to WM5.
newby_ita said:
ok, i tried using both but since the file are located in the ROM it's not possible to replace them. I think i'll have to downgrade to WM5.
Click to expand...
Click to collapse
uncheck hidden files and system files.
I have replaced many ROM files with this method.
many users did it - resco will ask you for permission to replace the file.
Hi!,I have the same problem with the camera and videocall..
newby_ita,can you upload the files please?..thx
i have the files ready, i tried to put them in the upload directory but i had "permission denied", any suggestions? i quitted working with computers two years ago and maybe now i'm a bit rusty ;-)
is there a different password for uploadind? other than xda:xda ?????
files attached
Thx newby_ita for the files.
To copy to the pda use Resco Explorer and you don´t have any problem.
I downloaded the files and replaced in my tytn but the videocall isn´t work fine..i can´t send any image to the other phone..
But many thanks for the files again..
another idea....?
I've had the same problem since flashing to Black Satin in mid-July. No sign of life from either camera. Running the camera exe directly does literally nothing. Problem does not yield to:
- SR/HR
- Any ROM reflash, including old ROMS that definitely used to work.
- Radio flash etc
To be honest I've let it go, but might have another play at some point...
sim
Please help me fix the camera of my Cingular 8125 G4 device. After I flashed a new rom using soft SPL method, which I think G4 safe rom, the camera is not working. When I press the camera button, I only see the spinning circle with different colors and the screen lights up a little bit than the normal brightness and stuck it there. And after a few seconds, the phone hangs up. Need to soft reset in order to put back the device in a functional state. I don't know why this happened as I followed all the necessary steps in using softSPL upgrade method. Maybe there is something wrong in the device registry. Does anyone has the same camera problem. Please share the tricks, tweaks or anything just to bring back the camera function again.
BTW, I reflashed back the official cingular stock rom but no luck at all its the same.
I see that you are using the TNT ROM, so I would to and flash UP to the newest version and see if that fixes your problem, it sounds like the camera software and drivers are not getting installed for some reason.
I reflashed the tnt rom but no good. Tried also to go back to the original cingular stock rom but still not working. Even in the windows\camera cannot make it. But when tried not to use the device for a some hour in standby mode, the camera works for a while then it hangs up. And go back to non-functional state.
Sir, what you think is the problem? I suspect its the software installed in the device based on what the camera behave. Or definitely the hardware itself and need to replace. Bad for me because I am living in the Philippines and as far I knew there is no service available in our country.
Thanks in advance whatever help you can give. Have a nice day.
Try using the wizard service tool to increase your page pool to 6mb.
Camera work again after....
My dead camera work again after I flashed rom cooked by Cracing. This rom is awesome. Its compatible with Wizard. Thanks to Cracing.
Hi
I got my Touch Dual ( ory. MDA Touch Plus) 2 weeks ago. Everythink wos fine and i break security using SPL 1.22 and HardSPL 1.55, flash oryginal Orange Rom 6.0 Polish i got a little problem. When i push "turn on" button in working phone and Touch go to sleep mode i can't turn it on. I push the button 1000x times and Touch not respond, it's freeze. Only reset help to get it working back. I try many Roms and Radio versions, allways is same problem. But Official rom from HTC 6.1 is working with no problem, i can sleep Touch and turn it on every time i whant, no more freeze.
Can you help me, i dont know what is going on ... where is a problem ? i whant RUU_NIKI_Lite_V2.1_2D working on my Niki :-(
Hi everybody:
I installed the udk syrius 7 rom Polaris, when activate my camera
it doesn`t show imagen, it`s black andy show the news
text:
Unable to capture photo. Unable to get frame data from
camera device.
Can you help me??
Thanks a lot ¡¡¡¡
Same here!
Same here!
I tried several roms and I still have the same issue.
Tried downgrading the radio, didn´t work either...
Could it be the SPL?
I have had the same problem. I have resolved with a new one flash of ROM
SPL is OK !
Just go back to a original rom (incl radio) and after that try again.
If that doesn't work just try a other radio rom.
Most of the roms have different radio requirements
Some need 1.58****
Other need 1.59****
Normaly the rom maker gives that info.
Sometimes the camera malfunctioning is a software issue.
As i experienced it is a hardware issue when you still have the troubles when you go back to original rom and radio rom. Although there are tons of users which get the camera to work after installing some package etc, my defect was loose connections on PCB/CPU or something similar. Thats why the problem starts slow, sometimes it works, somethings it doesn't and in the end it doesn't work at all.
The only thing you can do then... is return it for warranty.
Bought a T mobile HD2 (unlocked) second hand with energy rom installed.
Got it home & I find that the wifi & bluetooth are not working.
It picks up the network signal fine & the data connection is working fine.
But the wifi turns on & will not pick up anything.
The bluetooth it seems does not discover & is not discoverable.
I suspected it may be somthing to do with the rom so I loaded up a stock T mobile rom with the same results.
I have updated the radio with the same results.
The phone has Hspl loaded & I am wondering if I could do a complete cleanout of everything including Hspl & reload a completly vanilla stock Rom would that help.
I have fiddled with all the settings for both wifi & bluetooth & still no results.
At this point I need help!!!!
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
johnerz said:
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
Click to expand...
Click to collapse
I've the same problem ...I suppose.
I used a Touch Pro in the last two years and Energy ROMs since September 2009. I never had problems with Wi-Fi an Bluetooth.
Recently I bought a HD2 and tried Bloutooth and Wi-Fi only after 1 week.
So, both the Touch Pro and the HD2 got the same ROM (Energy ROM) flashed , each by its own version, but two days ago I discovered WiFi not working (DISCOVERED, because I never tried it before)
The problem seems an extremely poor signal seen on the on screen meter, only if I'm close to the router (1-2 meters!) I couldn't establish a real connection, because the HD2 loss the signal every 30-40 seconds.
Bothered about this I tried with Touch Pro: the result is the same!
So I concluded: "It's the ROM!". Strange (never had problems with Energy ROMs) but possible. I flashed the stock ROM on the HD2: the issue remains. So I thought about the RADIO, and I flashed the RADIO 2.12.50.02 (compatible with ROM). The issue is still here.
I used Task 29 before another flash, then I tried an Artemis ROM with RADIO 2.12.50.02... nothing changed. (note that I tried almost every different settings about Wi-Fi,from BsB tostandard enhance settings)
Last (related?) issue: when I try a hard reset, the progress bar starts to "move" but after 3-4 seconds (about a third of the bar) the bar disappears and I got the "Press VolUp button" message. Then the phone has the first boot... but I wonder if the HR is complete, because it seems yes.
Finally I came to this thread and... another doubt: what about BT?
I tried both the Touch Pro and the HD2 Bluetooths but they can't connect or recognize each other (every "Find" and "Visible" options activated)
I didn't try yet with Touch Pro (flash etc.) but I am very bothered and dubious about it.
Cooked ROM Energy Leo 1 Aug
OS version 5.2.23673
Radio 2.12.50.02
Operatore: H3G ITA
For every other info needed to give help... ask!
THANKS FOR HELP or TIPS
WIFI & Bluetooth
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
flinx said:
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
Click to expand...
Click to collapse
Sorry I can't help about this.
We are alone in this thread!
wifi & bluetooth
I think your right.
Ah well, at least I have a very expensive doorstop!
You are not alone. I am experiencing the exact same problem and have yet to find an answer.
Task 29 didn't help and reflashing the radio the traditional way (even with the stock rom) doesn't seem to overwrite whatever is causing this problem.
Would uninstalling the hspl do anything? I am running out of ideas.