My HTC TOUCH DUAL have SPL 1.21.000 but show me UPGRADE ROM CODE ERROR PLEASE TRY AGAIN, anybody dea? my HTC is 20 key.
thx
Use SoftSPL to upgrade your ROM!
Related
I tried to run unlocker, step 1 was successful but during step 2 there was an error and the program crashed.
Now the phone can enter bootloader when I switch on, when I try to flash a ROM I stays on %
Please help
sorry to hear that happend to you as you were trying to unlock your phone....
but when you enter boot loader what does it say at the top?
My athena also failed at upgrade... now, it only stops at opening logo..
I already have Hard-SPL installed but I don't find any program like HTC trinity Stack Overflow Exploit to unbrick it..
bootloader is still possible.. then what should I do?
and how do you use mtty?
Think before you jump to conclusions.
raf1987 said:
My athena also failed at upgrade... now, it only stops at opening logo..
I already have Hard-SPL installed but I don't find any program like HTC trinity Stack Overflow Exploit to unbrick it..
bootloader is still possible.. then what should I do?
and how do you use mtty?
Click to expand...
Click to collapse
Think before you jump to conclusions.
If it tries to boot and stops at the opening logo , the rom is corrupted but not bricked.
If you can get into bootloader you can usually resurrect without resorting to mtty ,which only really cmonex here knows how to use properly.
Check which SPL is visible in the bootloader screen and then flash an appropriate ROM.
ie SPL 1.1 > original ROM
SPL 1.2 > any spl 1.2 ROM.
lakeman said:
Think before you jump to conclusions.
If it tries to boot and stops at the opening logo , the rom is corrupted but not bricked.
If you can get into bootloader you can usually resurrect without resorting to mtty ,which only really cmonex here knows how to use properly.
Check which SPL is visible in the bootloader screen and then flash an appropriate ROM.
ie SPL 1.1 > original ROM
SPL 1.2 > any spl 1.2 ROM.
Click to expand...
Click to collapse
If you put it in bootloader screen (FULL PRESS camera button, while poking reset hole) What does it say on the "SPL" line eg; 1.1, 1.2, or 3.5? and what ROM are you trying to use?.................Hi Lakeman
Jay
athena x7500
please help. i have the same problem.
after flash with athenaunlocker after step 1 ,in step 2 my athena make error and my x7500 cannot power on but i can put it in bootloder made.
when i want to flash it with other rom it take 12% and show error.
who can help me please.
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
help please
likebie said:
who can help me please.
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
help please
Click to expand...
Click to collapse
you have to load an spl 1.2 rom while in bootloader
make sure you remove your sim and sd card first
Hey Guys I have a HTC Gene p3400i previously i spoke to guys like sumit and Krazy also, first i had a motherboard series of HT8X, i somehow unlocked the CID using Orefkov method, but everything was fine oneday i flashed it with a Wrong Stock ROM and thats where the problm started, it got bricked i took it to service center the technicians were very helpful they changed the motherboard to a new one of HT8X series, i tried to unlock the CID/Change the SPL to either Olipro or Orefkov both didnt work when i tried with Olipro jumpspl method it says the Update Utility is invalid, when i tried with Orefkov mtty it says cant unlock the CID or basicaly it says cant place the SPL and finally i tried the Olipro HSPL method it goes to boot loader shows Olipro 1.10 in SPL but when i flash a Old gene ROM the RUU utility says or wants a new RUU i tried it around 5 times continously starting from monday to Friday and totally it got bricked for 5 times also, i took it again and again to service center the guys didnt hesitate they were really helpfull they unbricked it, i even asked would i get my previous motherboard they said its already been sent to HTC for Fault Repair.
Now the methods which i can't use:
1) Olipro HSPL (which again bricks)
2) the Orefkov mtty (which says cant place the spl)
3) the Olipro Jumpspl method which shows a Blank white screen but when try to update using RUU says requires new RUU
PLEASE HELP.....!! THIS HAS BECOME A CHALLENGE FOR ME>>>>>>>> I READ ABOUT THE SAME PROBLM IN THE FORUM BY NEW BEES ALSO PLZ HELP......!!
Now i m using the stock rom which came with gene,i added a lot applications i somehow managed to get touch control for scrolling and all everything ok.....but i miss the WM 6.5 style MENU, TASKBAR, FREE RAM and most of all the TITANIUM it was my favourite i was using Duron's WM 6.5 for new gene it was very cool...
Now i feel like crying i am addicted to WM 6.5 PLZ HELP...
Hey Guys I have a HTC Gene p3400i previously i spoke to guys like sumit and Krazy also, first i had a motherboard series of HT8X, i somehow unlocked the CID using Orefkov method, but everything was fine oneday i flashed it with a Wrong Stock ROM and thats where the problm started, it got bricked i took it to service center the technicians were very helpful they changed the motherboard to a new one of HT8X series, i tried to unlock the CID/Change the SPL to either Olipro or Orefkov both didnt work when i tried with Olipro jumpspl method it says the Update Utility is invalid, when i tried with Orefkov mtty it says cant unlock the CID or basicaly it says cant place the SPL and finally i tried the Olipro HSPL method it goes to boot loader shows Olipro 1.10 in SPL but when i flash a Old gene ROM the RUU utility says or wants a new RUU i tried it around 5 times continously starting from monday to Friday and totally it got bricked for 5 times also, i took it again and again to service center the guys didnt hesitate they were really helpfull they unbricked it, i even asked would i get my previous motherboard they said its already been sent to HTC for Fault Repair.
Now the methods which i can't use:
1) Olipro HSPL (which again bricks)
2) the Orefkov mtty (which says cant place the spl)
3) the Olipro Jumpspl method which shows a Blank white screen but when try to update using RUU says requires new RUU
PLEASE HELP.....!! THIS HAS BECOME A CHALLENGE FOR ME>>>>>>>> I READ ABOUT THE SAME PROBLM IN THE FORUM BY NEW BEES ALSO PLZ HELP......!!
Now i m using the stock rom which came with gene,i added a lot applications i somehow managed to get touch control for scrolling and all everything ok.....but i miss the WM 6.5 style MENU, TASKBAR, FREE RAM and most of all the TITANIUM it was my favourite i was using Duron's WM 6.5 for new gene it was very cool...
Now i feel like crying i am addicted to WM 6.5 PLZ HELP...
Please I try to update my htc
herm200 and there is block of 3 color
when I try to update it hangs on 12% or
11% (other Rom) how do I appeal to you if I am
sad
ipl-1.04 spl 1.40olipro wm6.1 but now i havnt
i have try to do a hard reset but dont work in my ht
Hope you have a copy of your SHIPPED STOCK ROM... You need to re-flash that then update your SPL to Hard SPL V7. The Hard SPL you have is an older, less safe version.
If you don't, you may have corrupted the radio rom on your Hermes which means you can install Hard SPL V& but the radio (phone) won't work ever again. Even with the SHIPPED STOCK ROM there's no guarantees...
I'd like my phone turns on again I have nothing to do with the radio
is that you can help me? please explain me again what I do and thank you very much
thank you
i have find a solution Here
thanks 4 you
hi guys today i start updating my the rom on my x7500 i made it to the third step where there were a progres bar untill it goes 91% where it stuck for a while and the program infome me that there was an error and i had to take the usb off romove the battery for 3 seconds and then start the device and i do it but when i turn the phone on i recive a black screen with some white lins on the top and some red letters on the bottom and after 2 seconds i turn grey and the programm dident see the htc so it closed. can i fix it now and how thanksssss
note: that i can stiil get the red green blue wite screen by pressisng the camera button and resset so i start all over again untill the progress bar get to the 5 i think and it get me a messaga tha this programme cant used for this devise
Hi and welcome to the forum,
What does it say on the bootloader screen (Reset/ camera button) and which rom are you trying to load? sounds to me youre trying to load a rom with the wrong spl.
Regards
Jay
hi my friend and thanks for the response in the boot loader screen it says
IPL-V1.00
SPL-V1.20.OLIPRO
and i've try to to put the 13th of this list http://forum.xda-developers.com/showthread.php?t=397518 which is this one http://forum.xda-developers.com/showthread.php?t=411371
Hi,
Now im not sure still what rom it is you are trying to use, it would be better if you just gave me the name on the download link. So go through the start of downloading it again and copy the name of the link. I think you are trying to flash a SPL 3.5 rom onto an SPL 1.20 Athena (yours!). any how, do that and let me know. If you think you are going to use 6.5 roms that are around now then you will need to first flash with the AP 4.0 rom first, however you need to have a working rom on your athena first. so i would recomend you flash with AP 3.0 OR go back to a stock rom and start again. AP 4.0 swaps your SPL to 3.5, but it will swap back to SPL 1.2 if you want to.
Jay
thanks again my friend the broblem solved by following the steps on this link (the second post) http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 but the broblem came becuse in the ist of roms says windows mobile 6.1 and spl 3.5 and spl 1.2 and inside the lin is says wm 6.5 and spl only 3.5 now i manage to put one but i will try to upgrate to spl 3.5 in order to get the rom i want one more time thanks responderman for the respone
Not a problem, glad you are sorted out now. Just be very careful if you upgrade to SPL 3.5, read the guide in full and follow it to the letter.
Regards
Jay
does someone knows how to update from spl 1.20 olipro to spl 3.5 on order to put an other rom for spl 3.5
follow instructions here
http://forum.xda-developers.com/showthread.php?t=429013