I installed the SPL-2.47No2Chem bootloader, then DCD 3.2.6 ROM, then tried to install the Radio Rom 3.42.30 (it had a usb installer since im at work i didnt have a microsd smaller then 8gb handy to use 3.42.40) and partially through the installation i get Error 328 (Invalid Command). Anyone know what thats about?
Related
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Read my specs. I have the same rom you do. should work
1.54.07.00 works
1.54.07.00 works well with vp3g's roms
If you can't be past error 262, here's an option:
Copy "SSPL-HERM.exe" to your miniSD then run it from the phone.
Your phone will reboot into the BL (tri-color screen)
Connect your phone via USB to your computer
When AS finally pops up, click cancel
Run RUUWrapper.exe and force SSPL
That should do it.
MontyV77 said:
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Click to expand...
Click to collapse
1.48.00.00
Hey u guys, I have 2.60 SPL Olipro (it gave an error when installing it on the 100%, but in bootloader mode its what appears so i guess it is installed ). Either way Im trying to update my Radio ROM and i cant seem do it. Ive got the radio rom file and the custom RUU, although everytime i try to update it gives an error at 7% an the PDA gets stuck in the bootloader and the only solution is to install the orginal HTC ROM. in addition, the phone is not Super CID or something, it is unlocked by factory...
Geez nobody here can tell me how to flash a radio rom? i have superCID, hard spl 2.10... I already have the radio rom i want and a custom ruu, but it always gives me a "flash write" error.
hi guys, I flashed my mogule few days before, but it failed. I try to flash it by TF CARD and
USB cable, when I update rom by USB cable, it shows
ERROR [270] : UPDATE ERROR
The image file is corrupted. Please check your Update Utility.
when I udapte rom by TF CARD, it shows
0018003
TITAIMG.nhb - FAIL
OS - Fail
Update Terminate
UPDATE FAIL
I can flash radio alone successfully, but when I flash Hard-SPL 2.40 alone,it seems finished,
but in the red - green - blue screen it shows
TITA100
SPL-2.47No2Chem Titan SPL EVT
CPLD-9
I think it does not work, I can't flash any rom (include sprint offical rom) with OS now, it will be failed,
what should I do? thank you.
Try this file.
http://forum.xda-developers.com/showthread.php?p=1940731
It will help you get out of the bootloader.
Remember, you have to downgrade your loader to get the radio to load. There is not a ROM Update Utility Compatible with the new radio yet.
I'm not sure which ROM you are trying to load, or which radio, so I can't help you too much there.
The information is in the wikis if you read them all the way thru. Then read them again. Then read them again. And the dudes making the roms include any special instruction in the threads.
Thank you very much
I plan to load DCD' rom 3.2.2, Radio 3.42.30. I'm cooking customized ROM by DCD's Kitchen v3.2.2. Can Titan-exibl.exe help me remove bootloader(SPL 2.47 No2Chem) from Mogul? or downgrade the SPL from 2.47 to 2.40?
Before I load DCD' rom 3.2.2, I want to flash RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe at first.
Nope. All it does is kick you out of the bootloader so you can start over.
I previously had a DCD 3.2.6 ROM on my phone, 3.42.40 radio and 2.47 bootloader. Worked just fine. Then I thought I'd flash the latest Alltel stock ROM. At the time, I couldn't find my 1GB MicroSD card. So I downloaded ImCokeMan's 1.06 relocker and relock through USB. It flashes fine, and I am at the bootloader screen. Ready for a stock ROM, right? Well when I open up the RUU to flash the Alltel ROM, it detects my phone, and starts to flash. At 11%, it stops and tells me "Wrong Vender ID" of course meaning the phone is once again CID-locked. So I went and bought another 1GB MicroSD card (~$10) and thought I'd flash it that way. Put my Alltel ROM on the card as TITAIMG.nbh and put it in the phone. Then I got the same CID-locked error on my phone - "Not Allowed". What do I do?!?!
Okay, used bootloader exit utility, got to boot somewhat. I don't know why the bootloader exit utility doesn't work on Vista though.
--Got reset loop without USB connection. Upgrading to 2.47
Anyone encountered this error before? It gets to 8% and then phone reboots and I get this on my PC screen. It says Error [328] (see attached image)
I am using Radio 3.37.75 (verizon), and my bootloader shows 2.40 Olipro
Any ideas?
Try this RUU it is version 3.16.4.3.
Yes, thats the version that I am using. I think... when I run it, it says 3.16.4.3 in the window title bar. (see screen shot)
EDIT: I tried it anyways, and I got the same thing. Do I have the right bootloader? Would a different one help?
what are you trying to flash
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
wildcard said:
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
Click to expand...
Click to collapse
Just follow my post here and only use the files and Radios that I provide. Make sure you read a few times so you understand, and dont skip anything. Most important based on what I have read in this thread. Use only the radios I provide on my share site and take your time paying close attention.
http://forum.xda-developers.com/showpost.php?p=3687027&postcount=144
Thanks, I'll do it exactly like that. I will keep you posted. I have to get a new micro SD card, I only have an SDHC 8 GB
The radio can be updated via usb. I do it all the time. But it does hard reset the phone in the process.
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
I followed the directions exactly like in Ryan's post mentioned above, (used USB instead of SD card), and it works!
Fully functional. I used Radio 3.42.02 (somewhere I saw that it was recommended over the others, went with it to be safe). Then Flashed Ryan Mogul Rom 2.2 Heavy.
Thanks everyone!
drewcam888 said:
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
Click to expand...
Click to collapse
i have spl olipro-2.40, rom dcd 3.2.6 and want to upgrade radio to 3.42.50 using usb. should i downgrade spl to 1.20 before upgrade the radio? or i stick with current config and update the radio using RUU?
Still cant load radio
Obtained 6800 originally Alltel, not sure which radio, Had Olipro 2.40 installed, would hang on Alltel splash screen.
Could not get any RUU loads to complete (from USB or SD card), usually would fail around 50%.
Eventually was able to get RyanMogul 3.1 Cricket (lite) to load, but shows no radio and eventually screen goes blank. Never goes into active Sync mode.
We force boot loader mode and try and load several radios including Titan_Radio_ROM_3.42.50.Alltel.rar, Titan_Radio_ROM_3.35.04,
but keep Getting error 328 from RUU when I try to load a radio..
tried RyanMoguls "Here is a fix for GPS for all you VX6800 users that gps will not function!!", but cant run relocker because no active sync connection.
Stock Verizon ROM RUU also gets error 328.
Any ideas.