Jabra SP700 - Wing, P4350 Accessories

Does anybody use that with the Wing? I got it connected, and can get the phone calls through it without a problem, but the music when I use Windows Media Player doesn't come through. It comes out of the Wing's speaker.
I'm using OpenTouch Biggie ROM.

Solved
If I press the talk button on the Jabra for a couple of seconds (after it's paired up), then all the sounds from the phone transfer to it, so the music will come through.

Related

Bluetooth headset music problem

I just got a new headset (nokia bh-168) and I'm can't get music to stream to it from my Cingular 8525. I have tried many programs to set the headset up on my phone but after about 10 seconds of playing the music on my headset, it goes back to playing on my phone.
Is there a way to get the my phone to play music through the headset without this problem?
Edit: I found an application that works by Cybertron. Here
Would be good to know, witch Rom are you using???
Chris

[Q] Phone sends noise via A2DB

Hello,
I've got a strange problem.
I connect the phone with my A2DP receiver in my car. The car audio has the function to switch automaticly to source A2DP if there is a signal.
On first connect everything works fine, bun on reconnect (leave the car, come back and reconnect) the phone sends a very low noise so that the car audio switches to A2DP.
There is no player running on the phone.
Samsung voice to go and vlingo or similar are not installed (I hear the same noise when vlingo is in listening mode).
When I start a player, start music and stop again, the noise is gone and the car audio swiches back to radio.
If I use a MW600 instead I can hear the noise too, when I turn the volume up.
I had the issue with Stock KI4 and now with CheckROM V6 too.
Did someone noticed this noise too? I there something I can do?
thanks
Andre

[Q] Problem with Bluetooth phone

Hello all,
I am having a problem getting the phone part of my new DNA to work with blue-tooth in my car. The A2DP works great but after I answer or make a phone call with my Car Stereo (eclipse 3200) I cant hear anything and they cant hear me. If I use the dial-pad on the phone to make a call I hear the tones from the button pushes but nothing after the call is connected.
Thanks for any help or suggestions
chooven said:
Hello all,
I am having a problem getting the phone part of my new DNA to work with blue-tooth in my car. The A2DP works great but after I answer or make a phone call with my Car Stereo (eclipse 3200) I cant hear anything and they cant hear me. If I use the dial-pad on the phone to make a call I hear the tones from the button pushes but nothing after the call is connected.
Thanks for any help or suggestions
Click to expand...
Click to collapse
I have a Sony bluetooth player in my car and it will not even recognize the device.
Edit: It was a user error on my part. I have successfully paired and it works flawless.
xentheosx said:
I have a Sony bluetooth player in my car and it will not even recognize the device.
Click to expand...
Click to collapse
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
eleazar123 said:
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
Click to expand...
Click to collapse
I think the phone just has bluetooth problems in general, or BT4 is just not 100% backwards compatible. I have a Pioneer stereo, and never had any problems with any of my android devices (OG Droid, Droid X, inc2 and gNex) connecting, but when I connect my DNA, it actually crashes the phone process on the handset and it restarts (the process, not the handset). It still appears to be connected to the stereo after that, but I haven't tried making a call yet.
Stereo doesn't support BT streaming, so I can't test that. Has an SD slot, and that's all I ever use.
I'm having the same problem. My music will play for about 3 seconds, then goes silent. The car says I'm still connected, Google Music is still playing, but it mutes out. Was having fun while driving hitting the pause/play button to listen to a song 3 seconds at a time. Does anyone know if this is a OS problem, hardware problem or incompatibility, or other problem? I didn't see many posts about this elsewhere and haven't heard back from Verizon.
eleazar123 said:
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
Click to expand...
Click to collapse
Working fine for me with my Kenwood. Music does skip occasionally, but my other phones (galaxy nexus, thunderbolt) have done that too.
Sent from my HTC6435LVW using Tapatalk 2
For all of us who suffer a HTC Toyota combo and the dreaded bluetooth pause issue I believe I have found the issue and got a working solution !
From what I gather, the HTC music player sets the bluetooth player state to pause when leaving the music player and most other apps do not set it back to streaming. I found one which does, so a simple solution !
1. Start and stop a piece of music with the Fplay music player and it will reset the bluetooth player state to streaming. I put a widget on the home screen.
2. Start your other apps and enjoy streaming sound again.
3. Enjoy
Fplay
https://play.google.com/store/apps/details?id=br.com.carlosrafaelgn.fplay&hl=en
Three minute video for those who would rather watch than read.
http://www.youtube.com/watch?v=ogvHjD8Aoj4

AI problems?

Does anyone noticed that the AI makes phone to act unexpected?
For example my bt earbuds, speaker gets connected/disconnected for no reason sometimes .. for example I go to smoke at work, bt speaker stays at workplace, coming back, connecting my phone to speaker, starting to work and suddenly after some time music just stops. I see I'm connected to a speaker in Bluetooth settings, but once I start music again, music is playing thru the phone speaker instead. And I have to reconnect to a speaker again.. and it continues like that till I reboot my phone..
If I plug in fabric earphones which comes with phone, sometimes automatically music is started, sometimes after couple minutes, sometimes never.
Call recording apps/and overall all apps are killed without a reason even excluded from all battery optimations/savers.
Also never knew that I have so many different songs after trying different music player, have anyone noticed that also?
In my case I have about 200 songs in my library, but with default music player, it seemed that I have like 20songs only.. always listening on shuffle mode.

Beats Studio3 Wireless and Galaxy S9.

Hello! My name is Efraín and I am new in this forum.
I want to know if someone can help me; Last week I bought the Beats Studio3 wireless headphones, I paired them successfully and I was able to listen to music. Everything was perfect. After that, I turned off the headphones and the bluetooth on my phone.
Then the problem appeared when I wanted to listen to music again, I connected the phone and the headphones and I could not listen to music, I specified music because I could hear the phone calls. The only thing I could not hear was the multimedia audio (youtube, spotify, samsung music, etc.).
After trying and trying, I noticed that the only way was; or reset the headphones (10 seconds the power button and lower the volume) or, pair the headphones and, when the headphones were activated, turn off the bluetooth of my phone and then turn it on again.
It's a shame, I've already talked to Apple, they told me to go to the warranty, but the nearest technical service is 500 km from my city.
I even tried my brother's iPhone 8 and it worked perfectly.
If someone can help me, I would be very grateful.
Greeting and thanks!
Efraín.

Categories

Resources