for any part of the flashing process does the phone need to be activated on the network
also to flash i upgraded bootloader using hard spl or the o one install a gps radio then the dcd or pre3 rom correct
Related
I have G4 device. Can i flashing Radio ROM? And how i can do this?
If i can please give me links.
yes, you can, I did this, mine is hardspl unlocked, used mun_ruu and different radio roms, just search the forum for "radio rom".
Yes! you can flash any Radio Rom to a G4 device without any CID unlock or HardSPL.It just includes upgrade files for GSM and doesn't include any IPL/SPL (Bootloaders) in them,just download the Radio Rom of your liking,hook up the phone with pc via usb cable and run the RUU included in the Radio Rom,it'll automatically run and upgrade the GSM of your phone.
Ok. I using SiftSPl for flashing. Today change Radio ROM from 02.25.11 to 02.61.11 so I did't notice the change. What powerfull firmware recommend?
New flashed radio ROM buggy. In conversation loses us, the call drops. Now flashed Rom from faria 02.69.11... Testing.
So here is my situation:
I had a 3.27 radio with a 3.xx rom (one of the DCD roms). I wanted to get the 3.35 radio so i decided to flash to the SPRINT 3.35 rom, to do so i had to relock the phone so i used Titan Re-locker (which may have caused the whole problem) and now I am stuck at the SPL 1.06 screen.
I tried flashing older roms and still no luck.
I am currently with Telus and only flashed the SPRINT 3.35 rom to get the 3.35 radio off it. WHat do i do? I haven't bricked my phone right?
I have tried to flash Sprint 2.09 and SPRINT 2.17 roms and have failed. The bar goes up to 1% and then restarts the phone back to the SPL 1.06 screen for any flashes i try to do.
So here is my situation:
I had a 3.27 radio with a 3.xx rom (one of the DCD roms). I wanted to get the 3.35 radio so i decided to flash to the SPRINT 3.35 rom, to do so i had to relock the phone so i used Titan Re-locker (which may have caused the whole problem) and now I am stuck at the SPL 1.06 screen.
I tried flashing older roms and still no luck.
I am currently with Telus and only flashed the SPRINT 3.35 rom to get the 3.35 radio off it. WHat do i do? I haven't bricked my phone right?
Click to expand...
Click to collapse
Ok there's a WHOLE mess of problems with this post. First of all, if you read correctly in the kitchen thread, radio 3.35.04 is REQUIRED for any 3.x.x rom. 3.27 WILL not work. Second of all, you do not need to relock your phone when installing the 3.35 sprint rom, in fact, that's what caused it to break as the 1.06 bootloader will not flash or boot a 3.35 rom or radio. The only way to fix your problem right now is to flash the stock telus rom and radio using the microsd flashing method. Once that is complete, you need to unlock again with Olipro 2.40, and then run the sprint 3.35 update.
sux 2 B U. I highly doubt it is bt\ricked, you just dont know what U R doing.
This it what I did...
I did not need to relock. I started the sprint update with the phone booted up to the titan in Hard-SPL mode(miltucolor flash screen) . It reboots to the Hard-SPL several times to finish it and may pause several times. I just let it run. Keep an eye on it, it is done when it boots to a regular boot screen. Dont let it finish booting and then manually boot into Hard-SPL (PWR + Camera + reset with stylus) and flash DCD 3.0.4. I did the same process with the alltel update to get 3.37. You will be left with the bootscreens from the Sprint or Altel rom, but booting to DCD rom with 3.37 radio, GPS, exct....
Hi,
i own a Titan with olipro 2.40, radio 3.42.50 and ryanmogul rom wm6.5
i also have a problem with my wifi (when i turn it on it turns off after 1 second)
i would like to try to relock my phone and install de orginal rom and radio
My carrier is bell so it's a pre-gps radio.
does anyone know the best way to do it. i dont want to brick my phone since it's out of warranty
thx a lot
Look in link below but where is says use stock verizon rom use your Bell rom.
http://forum.ppcgeeks.com/showthread.php?t=21161
Hi guys,
I´ve read a lot of posts here at xda.
But i have few questions before i try to upgrade.
First of all, my RADIO version is not listed anywhere here. It is 1.58.21.26. So if i SuperCid it, is there a problem to put another radio version?
2 - If i install another ROM(original or cooked), is there a way to go back to the default rom that it´s in my phone? even after i installed other radio version?
3- supercid, hardspl, sspl or uspl? wich one is better or keeps my original rom and radio??
Thanks!!!!
1. If you CID, and use HardSPL (1.22 latest i believe) you should have no problems flashing new Radios or ROM's.
2. When you flash a new ROM your current one is over written (after you have flashed it you have to set up the OS again - all data stored in phone memory will be lost).
3. They are all different Things. HardSPL permanently updates the SPL on your phone allowing you to flash a new ROM when ever with bricking your phone. SSPL (SoftSPL) allows you to flash a new ROM (or radio, or hspl) 1 time then returns to the normal SPL. uspl, I'm not sure about I have never used it before. and CID unlocks the device to all networks and allows you to flash any ROM (rather than just ones from your carrier or official HTC ones. NONE of these will preserve your ROM if you flash a new one. however if you just flash these bits they should not effect windows or your radio.
DO NOT put a new ROM on your phone until you have unlocked it and put HardSPL or SoftSPL on it. If your brick your phone its near impossible to get it working again!
Questions before proceeding.
My HTC NIKI100 was unlocked for any carrier through the IMEI code, it also has the original radio 1.58.21.26. Perform the installation process of HARDSPL 1:22 as the tutorial here: http://forum.xda-developers.com/showthread.php?t=355730 and got success! now I can put a new radio or need to do the procedures as SuperCID here: http://forum.xda-developers.com/showthread.php?t=395945 ???
Okay Now I KNow Im New So Plz Dont Flame. I Tried Searching But Couldnt Find A How To. Once I Flash the new rom the phone will automatically reset but i get stuck at the new splash screen.i was told i should probably install a new radio rom. which i have. but i dont know how to flash just the gps. anybody help please.
You must install by sd method
http://forum.ppcgeeks.com/showthread.php?t=33857
Okay, lets start from the top. Did you flash it with a new SPL first? What ROM did you use? And what radio did you use? If you don't have the correct radio, a reboot loop will occur, which means you just need to flash it with a GPS enabled radio like the newer 3.42.50. That will overwrite your current radio and bring you back to speed.
are you saying the only way to flash the radio is to use the sd card?
wagonis said:
Okay, lets start from the top. Did you flash it with a new SPL first? What ROM did you use? And what radio did you use? If you don't have the correct radio, a reboot loop will occur, which means you just need to flash it with a GPS enabled radio like the newer 3.42.50. That will overwrite your current radio and bring you back to speed.[/QUOTE yes i followed the directions step by step in ryan moguls post yesterday. im using the 3.42.50 eadio from ryan and the titan v2.2 heavy rom.any ideas
Click to expand...
Click to collapse
Probably a bad flash. Flash the ROM again. If your phone is unlocked with spc code all zeros and you have olipro 2.40 bootloader and GPS radio 3.35 and up you should have no problems with Custom Titan ROMs. After you re-flash hard reset and pull the battery for a couple minutes.