Related
hello as i am new to the community. Ive been reading up on all posts in the forum and ive seend methods to revive my xda2. It has v23 and can detect when in serial or usb. Ive tried redocking and doing reinstall of rom to no avail. Ive also tried to do sd method the way you guys have described it but nothing happens when i do hard reset or press camera button, it just doesnt do anything. Can anyone help me? Im in california, is there somewhere i can send it to get fixed if i cant do it myself?
Hi maester_squall,
1. Get this ROM: http://www.t-mobile.nl/global/media/zip/HI_TMNL_17200_190_11700_Ship.exe
2. Get this modified upgrade utility: http://forum.xda-developers.com/download.php?id=685
3. Unpack ROM and modified utility into same directory on your PC
4. Delete "HimaGetDeviceData.exe" and "HimaClearJumpCode.exe"
5. Connect XDAII's craddle directly to your PC. Not through any USB hub.
6. Put XDAII into craddle
7. Run HimaUpgradeUt.exe
8. Wait and pray...
buzz
thanks, ill try anything right now.at the very least ill have a really expensive and nice looking doorstop.
Still getting same results. Message says its erasing current software from pocket pc and just stays a 0 percent. and is the device supposed to turn off? any other suggestions? Are there any service centers i can send it in to? I bought this off of my friend.
did you try to flash it with SD card yet?
buzz
For some reason flashing with sd card in bootloader wont work,(unless im doing it wrong or didnt make the sd card right)
you will need SD card reader and WinHEX...
i have sd card reader, i dont have winhex. i dont really know how that works, but ill give it a try. can you give me a step by step on it?
you will need SD card reader and WinHEX...
ok, i just downloaded winhex and its now registered, what do i do now? sorry to keep asking all these questions.
one more thing, you must download mtty.exe if you don't already have it...
i have that too. but what do i do with them?
one more thing, you must download mtty.exe if you don't already have it...
ok, i have mtty.exe, winhex, an sd card reader and the rom you told me to download. What do i do now? or is there a forum topic on this as i havent seen it yetthru searching all the pages.
Alive again!!!
I was able to fix it using mtty program, i did another search on bootloader commands and worked like a charm! thank you for helping, this community is the best!
cool!!!
...it was too late yesterday. we went to sleep..
i would suggest to put it one more time to bootloader mode and to make your own SD ROM backup. but not just OS. do radio and bootloader as well.
then save it on some safe place. just in case...
Alive again!!!
will do, not gonna mess with the rom,ex rom, or radio this time, i like my xda just the way it is. unless someone comes out with a way to put se on it.
what do you mean with bootloader v.23 ?
i only know of bootloader versions up to 1.06. if you have a newer one, can you post it to the forum?
cool!!!
...it was too late yesterday. we went to sleep..
i would suggest to put it one more time to bootloader mode and to make your own SD ROM backup. but not just OS. do radio and bootloader as well.
then save it on some safe place. just in case...
about bootloader v23
actually i looked arounbd about this bootloader, and found out this is one of htc's unit demos. I think these were out before the others, dont know for sure though.
I think my Mogul is bricked after trying the ROM update; after about 7% update Vista kicked off the USB connection and I'm left with a tri-color screen. When I try to reinstall the ROM I get an Error 328 message - Invalid Command. Any help? Thanks!
Definitely not bricked if you can get to the tricolor screen.. which rom exactly were you flashing and what have you flashed so far (unlocker, etc)?
Have you tried updating from the microsd card? That solved a similar problem for me.
AFH said:
I think my Mogul is bricked after trying the ROM update; after about 7% update Vista kicked off the USB connection and I'm left with a tri-color screen. When I try to reinstall the ROM I get an Error 328 message - Invalid Command. Any help? Thanks!
Click to expand...
Click to collapse
What steps have you taken so far? That might help others figure out your problem(I would help but I'm leaving my computer right now)
Just tried to re-cradle and reinstall the update - ROM 3.35.651.2 from HTC's website, and I get the message Invalid Command and it stops the update. Can I run this from the MicroSD card as suggested? Any help very much appreciated!
I have no access to anything on the phone BTW - just the screen and nothing else. The screen has four horizontal stripes - Red, Green, Blue and White. In the red stripe it says TITA100 MFG, SPL-2.03.1000, CPLD-9, and at the top of the screen RUUNBH....
Run Olipros 2.40 bootloader. Than, go back and flash the 3.35. I'm pretty sure you need the 2.40 to load the new ROMs. Yes, just run Olipro's 2.40 while you are in the tri-color screen. Also, make sure you have more than 50% battery life left.
Where do I get the bootloader and how do I run it? Sorry to sound dense, but this is new to me. I have the concept of running the bootload mode - Camera, Power, Reset, so I assume some software needs to be loaded on the MicroSD card? Thanks!
You know, it's fine if you're new to this....everyone starts somewhere...and it's good to see new faces in the community...
But what I don't get is why people insist on just flashing right away without reading and researching. Then they make posts about thinking their phone is bricked, not even knowing what a bootloader is.
My advice before you do anything else is to take an hour and read. Read about how to flash, read about bootloaders, read everything you can find about updating your phone. Then, try and fix your bootloader.
Your phone isn't bricked. A brick is just that, a brick. NOTHING works, not the bootloader, not the buttons, nothing.
gcincotta said:
You know, it's fine if you're new to this....everyone starts somewhere...and it's good to see new faces in the community...
But what I don't get is why people insist on just flashing right away without reading and researching. Then they make posts about thinking their phone is bricked, not even knowing what a bootloader is.
My advice before you do anything else is to take an hour and read. Read about how to flash, read about bootloaders, read everything you can find about updating your phone. Then, try and fix your bootloader.
Your phone isn't bricked. A brick is just that, a brick. NOTHING works, not the bootloader, not the buttons, nothing.
Click to expand...
Click to collapse
i second this emotion
Actually, although I'm new to this forum I'm not new to computers. I'm not as familiar with the inner workings of a handheld. I assume a bootloader is the software necessary to run the ROM flash from the SD card; when I run in bootloader mode, I do get a very brief "image not found", so I assume it's looking for the ROM image on the card. And I'm tracking down Olipros stuff right now through the forums, as well as the recommended reading. With a little written direction I think I can "unbrick" this phone. I did successfully flash another Mogul from a different computer, so assumed it would be as smooth; guess not. For those with the expertise, I certainly appreciate the advice and patience to teach a novice...
Once you find the required bootloader program, just run it as if you are flashing a ROM. Once you get "Olipro 2.40" on your tri-color screen, you'll know that your getting somewhere. But yes search and search and read. I also downloaded everything I think I would need also, just in case.
OK - so far 've tried running the Olipro Bootloader 2.40, but I get "device not connected." Perhaps I should mention I'm running Vista Home Premium, so no ActiveSynch; my PC has Mobile Device Center. I hear the little chime when I connect the Mogul, but the Olipro software doesn't recognize a connection....
I have done all of my flashes on my Vista Home Premium laptop. Make sure you uncheck "allow USB connection" on WMDC. Also, after every failed attempt, take the battery out of your phone for 3 seconds and then reinstall.
Did you mean check "allow USB connections"? WMDC is attempting to connect, but always fails. I was assuming because it doesn't recognize the PDA...
no he meant uncheck....READ!!
start here http://forum.ppcgeeks.com/showthread.php?t=9927
Thanks; I have an XP machine I'll try; jacking with the WMDC drivers in Vista would take more time than its worth...
Actually Vista should automatically find and install the required drivers for you. It shouldn't take long. It's well worth the time considering what you are getting yourself into.
First, thanks for the assistance all. Status to date: I have connected to my XP machine and still can't connect the Mogul to ActiveSynch. ActiveSynch won't recognize the device in its current state. I've tried running the bootloader program both with the "USB Connection" option in ActiveSynch on and off; when I run the bootloader I get a popup window that says "No device connected", and a query "Would you like to try copying again?" with button options "Yes", "No" or "Cancel." Clicking "Yes" gives me the same popup. Clicking "No" lets the loader proceed, but has no effect on the Mogul except ultimately it brings up a screen showing the percentage complete which remains at 0, and on the PC it brings up the Recovery screens for the ROM update, which have no effect on the Mogul because I assume no connection has been made. I'm obviously misinterpreting some of the steps?
Any way to run the loader from the MicroSD card? I think someone mentioned it before?
Sounds like you still didnt get Olipro 2.40 into your machine, right?
When you boot it (press camera+power+soft reset) which bootloader do you get showing?
If its 1.06 or something like that you need to flash a (manufacturer) stock rom.
If its 1.20 Olipro then you need to flash a customized pre-3.16 rom. (if you need one pm me and I will give you a link to a clean one for your carrier)
Either way you need to get the rom file called xxxx.nbh. Rename it to TITAIMG.nbh. Place that file into the root of a FAT32 formatted sd card. Inster it into your sd card slot and power down and power up the titan. It will automagically read the rom from the card and flash it for you. Same goes for radio nbh files
ITS A HTC HD2 NOT THE ORIGINAL
Ok I am a really big noob and need some help. I Flashed My rom using Miri_HD2_WM65_21893_Sense25_V6.0.rar, I extracted in and it completed 100% and loaded up perfectly to home screen. I didnt have my sim card in or Sd card so I took battery out and put my sim card and sd card back in. When I turned it back on it was stuck on the HTC screen. Just the Green HTC writing and white screen and thats it. I have read some forums that have had the same problem but i just dont get it. they say get into bootloader ( which i can do) and then flash with radio or something... I am uncertain how to do this. When I downloaded one of them Customruu or whatever it is and open it it says I have to connect through active sync which i cant do because I cant get my device to turn On... I really need some help but it needs to be explain to me like explaining to a handicap person.
thanks
Put into bootloader, not necessary to connect to Activesync as you can't in bootloader mode. Flash the radio the same way as you flashed the rom. put the radio.nbh file in a folder, rename it to RUU_Signed.nbh and copy a CustomRUU.exe in and flash.
You'll find radios and steps here.
jaza20032000 said:
Ok I am a really big noob and need some help. I Flashed My rom using Miri_HD2_WM65_21893_Sense25_V6.0.rar, I extracted in and it completed 100% and loaded up perfectly to home screen. I didnt have my sim card in or Sd card so I took battery out and put my sim card and sd card back in. When I turned it back on it was stuck on the HTC screen. Just the Green HTC writing and white screen and thats it. I have read some forums that have had the same problem but i just dont get it. they say get into bootloader ( which i can do) and then flash with radio or something... I am uncertain how to do this. When I downloaded one of them Customruu or whatever it is and open it it says I have to connect through active sync which i cant do because I cant get my device to turn On... I really need some help but it needs to be explain to me like explaining to a handicap person.
thanks
Click to expand...
Click to collapse
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
where do I get the Customruu.exe from? What do you mean flash the radio same as the rom? how can i do that if i cant get connect to active sync? So does that mean I have to download Miri_HD2_WM65_21893_Sense25_V6.0.rar again? which radio file do I choose? I am so confused. Dont get annoyed its just i dont understand all this...
do NOT do it via SD card - flash the radio using activesync as mentioned in first reply. SD card is dodgy as hell and the quickest way to brick your phone for good
You can get CustomRRU from any ROM file - use the one from Miri's ROM
might've been worth reading the n00b flashing thread first as well as well as the first thread of Miri's ROM as all the info is on there...
how come you can't use activesync? what version of Windows you using?
in future i suggest you read the relevent threads and make sure you can flash a stock ROM before jumping into cooked ROMs...don't wanna brick an expensive phone do you?!?!
amma2005 said:
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I can't use the SD card because I dont have the adapter thing to be able to hook it up to my comp only way i could access it was through my phone in hard drive mode. So basically i cant put any files on it without using the phone... Any other suggestions?
futher info from Miri's ROM thread...
"You MUST use radio 2.07.50.27 or 2.08.50.08"
read this thread...
http://forum.xda-developers.com/showthread.php?t=609477
all will become clear - or it should do!!
EddyOS said:
do NOT do it via SD card - flash the radio using activesync as mentioned in first reply. SD card is dodgy as hell and the quickest way to brick your phone for good
You can get CustomRRU from any ROM file - use the one from Miri's ROM
might've been worth reading the n00b flashing thread first as well as well as the first thread of Miri's ROM as all the info is on there...
how come you can't use activesync? what version of Windows you using?
in future i suggest you read the relevent threads and make sure you can flash a stock ROM before jumping into cooked ROMs...don't wanna brick an expensive phone do you?!?!
Click to expand...
Click to collapse
If you read my post I cannot get into the home screen... My Phone is stuck on the HTC boot up screen therefore making it impossible to use activesync... I did read all the Noob and Miri **** and it worked. I got to the new rom, but when i took the battery out and put sim card and sd card back in it is just stuck on the green htc screen and wont go past it...?????????
jaza20032000 said:
I can't use the SD card because I dont have the adapter thing to be able to hook it up to my comp only way i could access it was through my phone in hard drive mode. So basically i cant put any files on it without using the phone... Any other suggestions?
Click to expand...
Click to collapse
i would say buy one only cost about £5 to £10 uk pound
It just sounds like you've got the wrong radio on your device...
Turn off your phone, and turn it back on holding down just the down button. It will go into the bootloader screen (red green and blue one). You can then connect it to your PC and it should say 'USB' at the bottom instead of serial.
You can then run CustomRRU (found here: http://forum.xda-developers.com/showthread.php?t=575524) with the radio file from this link:
http://megaupload.com/?d=HT7ZMDGH
and it should allow you to flash the radio and work...(put both the CustomRRU app and radio file in the same folder)
EddyOS said:
It just sounds like you've got the wrong radio on your device...
Turn off your phone, and turn it back on holding down just the down button. It will go into the bootloader screen (red green and blue one). You can then connect it to your PC and it should say 'USB' at the bottom instead of serial.
You can then run CustomRRU (found here: ) with the radio file from this link:
and it should allow you to flash the radio and work...(put both the CustomRRU app and radio file in the same folder)
Click to expand...
Click to collapse
Where do I get jus the CustomRRU.exe..?? For miri?
Edit: Just read post again you included link in last quote, yes i know i am retard
I put a link for it in brackets (found here: ) - use your eyes!! lol
if you're not prepared to read what people put then don't ask for help
EddyOS said:
It just sounds like you've got the wrong radio on your device...
Turn off your phone, and turn it back on holding down just the down button. It will go into the bootloader screen (red green and blue one). You can then connect it to your PC and it should say 'USB' at the bottom instead of serial.
You can then run CustomRRU (found here: http://forum.xda-developers.com/showthread.php?t=575524) with the radio file from this link:
http://megaupload.com/?d=HT7ZMDGH
and it should allow you to flash the radio and work...(put both the CustomRRU app and radio file in the same folder)
Click to expand...
Click to collapse
I am using a HTC LEO (HD2) with EnergyROM installed in it. Now I was tryin to flash updated version (11th march update), But I am having trouble with Activesync which somehows is from last few weeks. It connects & syncs the device too once USB is plugged in, But disconnects when I try to flash a rom using customRUU..It gets disconnected on the bootloader screen & activesync status turns to Disconnected from Connected..I pull out my battery & restart the device again. This is highly irritating & I wish if there's some other program instead of Activesync that could be used to flash a rom.
I tried doing it with bootloader screen, Turning the device off, then turning it on while pressing down the volume button, It sure goes into bootloader screen, but shows Serial at the bottom & not USB..So any ideas for what could be the alternative for people who face the same problem with activesync, Instead of wasting time to rectify this error, Its better to find some other alternative. My PC is running Windows XP 32 bit, I re-installed my windows when i had trouble almost a month back & activesync worked fine then, But just can't afford to do it every other week or so
????
amma2005 said:
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
when i do this hd2 says NOT ALLOW What should i do??
sbugra said:
when i do this hd2 says NOT ALLOW What should i do??
Click to expand...
Click to collapse
Flash via pc
ClydeB1 said:
Flash via pc
Click to expand...
Click to collapse
done it. thnx
vicky_crispy said:
I am using a HTC LEO (HD2) with EnergyROM installed in it. Now I was tryin to flash updated version (11th march update), But I am having trouble with Activesync which somehows is from last few weeks. It connects & syncs the device too once USB is plugged in, But disconnects when I try to flash a rom using customRUU..It gets disconnected on the bootloader screen & activesync status turns to Disconnected from Connected..I pull out my battery & restart the device again. This is highly irritating & I wish if there's some other program instead of Activesync that could be used to flash a rom.
I tried doing it with bootloader screen, Turning the device off, then turning it on while pressing down the volume button, It sure goes into bootloader screen, but shows Serial at the bottom & not USB..So any ideas for what could be the alternative for people who face the same problem with activesync, Instead of wasting time to rectify this error, Its better to find some other alternative. My PC is running Windows XP 32 bit, I re-installed my windows when i had trouble almost a month back & activesync worked fine then, But just can't afford to do it every other week or so
Click to expand...
Click to collapse
It's not possible to connect to Activesync while being in the bootloader mode (The hd2 says "USB" on Windows without activesync too), so it has nothing to do with Active sync. Try another USB-Cable or use the sdcard to flash (see amma2005's Post, but as far as I know, there is no need to format the card again).
amma2005 said:
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
Great advice mate.
Been a rom junkie for weeks, bouncing around several releases to find the one.
turned towards Dutty, flashed and got a wihte screen for my trouble. Followed your advice and now running CDLC V2 "dutty" without a hiccup.
eng.mohammad said:
Dear Friend;
i faced the same problem and thanks my ALLAHH, i found that the connector copper pin that connect the battery with the phone is not in its right direction so i used my hand to redirect it to can connect with the battery
Click to expand...
Click to collapse
Hi. Can you help with this? or anyone?
leo70 said:
Hi. New here. Done this magldr 1.12 and leo70 rom but my phone playing up badly after a lot of droid and 6 and other flashes. I can't install hardly any rom any more without it - ie: stock, wm6, android, wp7 rebooting constantly for no reason etc.
Done mtty and have bad blocks - about 16 and 16 reversed. done task 28 and task 28 55aa, and task 29 as read in other threads. tried everything with different radios, different nand droid. multiple wp7-hd2 installs. but still reboots.
Any thoughts? If go back to stock+spl1.66 and send back under warranty anyone know/think if they will fix it and/or replace it? they still have old sealed replacement hd2 stock or boards much? do they do diagnostics and look at bad blocks properly on warranty return? Even on stock-rom and stock-spl still does this reboot although not as much. Worried that stock-rom wm6 will "work" too well and they won't check blocks. What about task2a? etc? Any way to install wp7/magldr and partition right so no bad blocks counted in?
Thanks very much.
Will pay for fix that works - $.
Click to expand...
Click to collapse
I am stuck on DFT boot screen after hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage.
and yes, was Windows Phone 7 and activated with marketplace & xbox/live.
leo70 said:
Hi. Can you help with this? or anyone?
I am stuck on DFT boot screen after hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage.
and yes, was Windows Phone 7 and activated with marketplace & xbox/live.
Click to expand...
Click to collapse
Did you check the battery pins ? Sometimes they do get bent out of alignment and simply pushing them back into place gently does the trick.
I got a friends hd2 several days ago and it was stuck on the White splash screen and wouldn't go further.
I tried Hard reset with keys and it didn't helped to get past that screen.
So i decided to flash a new ROM.
First I installed 1.42.HSPL on it to make myself safe and tried to install WWE version but failed at 9 %.
After this i tried near all the steps from another thread on the forum, the one of italian guy who tried almost everything.
Strange thing is that after trying several roms and failing all the times at 9 %, the phone once booted into windows, and i got this information from it:
Radio 2.05.51.05_2
G 15.28.50.07U
Rom 1.48.406.1 (71294) FRE
But after powering it off it didn't boot up another time.
Also there was a small damage on one of the battery pins but I think i managed to get it soldered from outside with soldering iron.
I also tried with MTTY and it didn't work either.
I got the official rom 1.48.406.1 FRE (because this phone is from swiss operator in french language) but it doesn't flash it goes to 9 % and gives error 290.
Ok, i started the thread because I actually wante to ask the question, why i'm unable to get into the Flash process from SD Card.
I formatted SD and copied the LEOIMG.nbh from official ROM and other ROM's too but when i press Reset and hold volume Down key sometimes nothing happens screen is black, sometimes im going into Bootloader with Serial shown and this text:
"Upgrade ROM code error. Please try again" and in the top right corner its written RUUNBH.
Anyone has any idea what could be problem of this device?
Btw I own LEO too and i never faced any problem till now, it was originally in German Language and i flashed it to WWE and didn't get any problems like this one.
gjizaqin said:
I got a friends hd2 several days ago and it was stuck on the White splash screen and wouldn't go further.
I tried Hard reset with keys and it didn't helped to get past that screen.
So i decided to flash a new ROM.
First I installed 1.42.HSPL on it to make myself safe and tried to install WWE version but failed at 9 %.
After this i tried near all the steps from another thread on the forum, the one of italian guy who tried almost everything.
Strange thing is that after trying several roms and failing all the times at 9 %, the phone once booted into windows, and i got this information from it:
Radio 2.05.51.05_2
G 15.28.50.07U
Rom 1.48.406.1 (71294) FRE
But after powering it off it didn't boot up another time.
Also there was a small damage on one of the battery pins but I think i managed to get it soldered from outside with soldering iron.
I also tried with MTTY and it didn't work either.
I got the official rom 1.48.406.1 FRE (because this phone is from swiss operator in french language) but it doesn't flash it goes to 9 % and gives error 290.
Ok, i started the thread because I actually wante to ask the question, why i'm unable to get into the Flash process from SD Card.
I formatted SD and copied the LEOIMG.nbh from official ROM and other ROM's too but when i press Reset and hold volume Down key sometimes nothing happens screen is black, sometimes im going into Bootloader with Serial shown and this text:
"Upgrade ROM code error. Please try again" and in the top right corner its written RUUNBH.
Anyone has any idea what could be problem of this device?
Btw I own LEO too and i never faced any problem till now, it was originally in German Language and i flashed it to WWE and didn't get any problems like this one.
Click to expand...
Click to collapse
Not sure if this is the problem, but what size is your SD card? I've heard, that sometimes is impossible to flash from larger cards, safest way is to use cards up to 2GB...
CaponiND said:
Not sure if this is the problem, but what size is your SD card? I've heard, that sometimes is impossible to flash from larger cards, safest way is to use cards up to 2GB...
Click to expand...
Click to collapse
Actually the sd is original 2gb that comes with hd2.
Friend, try to flash hspl 2.08 !!
Most likely that is the problem.
Enter the bootloader and connect it via usb to your usb and install 2.08 hspl (search fo it on xda developer forum)
Before instaling it read the instruction so that you know that hspl 2.08 can be installed over the old version of hspl that you installed!!
Oh and update radio to atleast 2.07
2.14 is very good
PS
Did you perform task29 before flashing?
mladen.p said:
Friend, try to flash hspl 2.08 !!
Most likely that is the problem.
Enter the bootloader and connect it via usb to your usb and install 2.08 hspl (search fo it on xda developer forum)
Before instaling it read the instruction so that you know that hspl 2.08 can be installed over the old version of hspl that you installed!!
Oh and update radio to atleast 2.07
2.14 is very good
PS
Did you perform task29 before flashing?
Click to expand...
Click to collapse
I guess I should try to install 2.08 HSPL, do you think i can use the same HSPL installer and just install 2.08 hspl from it? Because i already tried 1.66.HSPL but didn't worked.
And yes i performed task29 two or three times it finishes with some known output message which is stated on the original MTTY thread to be ignored.
Any other ideas?
gjizaqin said:
I guess I should try to install 2.08 HSPL, do you think i can use the same HSPL installer and just install 2.08 hspl from it? Because i already tried 1.66.HSPL but didn't worked.
And yes i performed task29 two or three times it finishes with some known output message which is stated on the original MTTY thread to be ignored.
Any other ideas?
Click to expand...
Click to collapse
you have to flash the HSPL back to 1.42 0000 ,then update the HSPL to 2.08 HSPL directly. if you flash it from 1.66. it can not work..pls be noted. good luck to you .hope you leo can be used again.
zengxisheng said:
you have to flash the HSPL back to 1.42 0000 ,then update the HSPL to 2.08 HSPL directly. if you flash it from 1.66. it can not work..pls be noted. good luck to you .hope you leo can be used again.
Click to expand...
Click to collapse
Ok I installed 2.08.HSPL from 1.42.HSPL and it went successfully, now i see 2.08.HSPL on bootloader but it still fails to update ROM. Stops at 8 % on the phone with rectangle mark, and on the pc it stops at 9 %.
I get Error 290 - Unknown Command
But why i cant go into sd card flash screen when i press reset and volume down ?
I just used another 2 gb microSD and added LEOIMG.nbh from official FRE ROM and it doesnt work.
Hey bud,
I was having the same problem: the flashing didn't want to start by doing a reset+vol.down. I somehow got around this by putting the leoimg.nbh on my mircoSD card, and then started the flashing from my computer by running the .exe that contains the RUU (for ActiveSync flashing). This "magically" triggered the flashing from the mircoSD card (it showed me a screen whether i wanted to update leoimg.nbh). On this screen, pressing vol.down would start the flashing through ActiveSync, and pressing the power button would start the flashing from leoimg.nbh from your microSD card. In the last case, the update on your computer will stall at 0%, this is just because you're not running the update from your computer, but from your phone. On your computer it will time-out, but the update on your phone will continue!
I hope this works! But you're doing this on your own responsibility ;p
ce3c said:
Hey bud,
I was having the same problem: the flashing didn't want to start by doing a reset+vol.down. I somehow got around this by putting the leoimg.nbh on my mircoSD card, and then started the flashing from my computer by running the .exe that contains the RUU (for ActiveSync flashing). This "magically" triggered the flashing from the mircoSD card (it showed me a screen whether i wanted to update leoimg.nbh). On this screen, pressing vol.down would start the flashing through ActiveSync, and pressing the power button would start the flashing from leoimg.nbh from your microSD card. In the last case, the update on your computer will stall at 0%, this is just because you're not running the update from your computer, but from your phone. On your computer it will time-out, but the update on your phone will continue!
I hope this works! But you're doing this on your own responsibility ;p
Click to expand...
Click to collapse
Hmmm this kinda messed me up.
What EXE file you run on the pc so it triggered update from SD ?
Because it's upossible to connect with activesync and browse to sd without the phone being fully operational (winmo running).
So i would say maby you just got it somehow with key kombination, because it would be impossible to run it the way you say. Or maby i'm wrong.
Could you be more specific about how you exactly run that process?
Thanks for your kind help. Gjizaqin
Well, whatever ROM you want to flash,
when you download this ROM, the .nbh file is packed in a .exe file.
You transfer the .nbh file to your microSD (rename to leoimg.nbh), and you can run the .exe file to flash through ActiveSync.
Because it's upossible to connect with activesync and browse to sd without the phone being fully operational (winmo running).
Click to expand...
Click to collapse
For me it was possible: reset your phone with the volume button down, to get to the tri-color screen. It shows "serial" on it. When you then connect your phone using your USB cable, it should switch to "USB", after which you can run the ActiveSync flashing.
ce3c said:
Well, whatever ROM you want to flash,
when you download this ROM, the .nbh file is packed in a .exe file.
You transfer the .nbh file to your microSD (rename to leoimg.nbh), and you can run the .exe file to flash through ActiveSync.
For me it was possible: reset your phone with the volume button down, to get to the tri-color screen. It shows "serial" on it. When you then connect your phone using your USB cable, it should switch to "USB", after which you can run the ActiveSync flashing.
Click to expand...
Click to collapse
Whell, by doing this procedure your doing normal ROM Update, and it's not doing update from sd card.
Anyways i tried this way too but not successful, its stuck on 8 % and stay's that way for about 3 minutes, than it gives me error 362 on the loader.
Anyways thanks for your help mate.
Anyone with experience can give me advice what to do with this phone?
Thanks in advance.
Gjizaqin
i'm doing task29 too... but it hang when it runs on black screen showing the percentage bar. advise is appreciated. Thanks.
whizzkid_cool said:
i'm doing task29 too... but it hang when it runs on black screen showing the percentage bar. advise is appreciated. Thanks.
Click to expand...
Click to collapse
I guess were on the same boat
gjizaqin said:
I guess were on the same boat
Click to expand...
Click to collapse
I have the same problem, tried all sorts with no luck. Can't get SD card install to work either.
Oh this sounds fun, I can no longer run active syn with my leo, the computer reports that my "usb device is not functioning properly"
I have re downloaded sync, try as I might I cant it back up and running, I wish everyone else the best of luck
This might be just a little bit off topic, but does anybody know how it is possible that some SD cards are good for flashing ROM's and other (mostly the larger) aren't?
Do you also need to copy the folder "program files" from the SD card you've flashed the ROM with to the other SD card, when you'd like to use this for your device?
jordy1990 said:
This might be just a little bit off topic, but does anybody know how it is possible that some SD cards are good for flashing ROM's and other (mostly the larger) aren't?
Do you also need to copy the folder "program files" from the SD card you've flashed the ROM with to the other SD card, when you'd like to use this for your device?
Click to expand...
Click to collapse
There has been reported problems with some 16GBmSD cards when it comes to flashing from them.
The only thing you need on the mSD card is the LEOIMG.nbh file.
dwntoearth said:
Oh this sounds fun, I can no longer run active syn with my leo, the computer reports that my "usb device is not functioning properly"
I have re downloaded sync, try as I might I cant it back up and running, I wish everyone else the best of luck
Click to expand...
Click to collapse
If you boot up your phone to Bootloader mode (but not connected to the computer), the bottom of the screen reads 'Serial'. If you now plug it into the computer, does it change to 'USB'?
Your computer error message is just saying that the computer cannot install a driver to communicate properly with your phone. Since your phone isn't fully loaded into WinMo then your computer isn't going to recognise it as a WinMo device. So don't worry about that message.
feridoun said:
I have the same problem, tried all sorts with no luck. Can't get SD card install to work either.
Click to expand...
Click to collapse
I guess this problem happen to some of the flash addicts! Problem still unsolved...
I need help!
My phone has been hard bricked for awhile now but i'm not giving up on it. Recently it started vibrating every 2 seconds for about 5 minutes then it would stop.Also the screen flashes a white line across it.
I made a 350mb image yesterday just to see if the 195mb image was too small and it made the phone vibrate more and for longer this time so i know i'm very close to something here.Somebody please let me know what i'm doing wrong
frasslee said:
I need help!
My phone has been hard bricked for awhile now but i'm not giving up on it. Recently it started vibrating every 2 seconds for about 5 minutes then it would stop.Also the screen flashes a white line across it.
I made a 350mb image yesterday just to see if the 195mb image was too small and it made the phone vibrate more and for longer this time so i know i'm very close to something here.Somebody please let me know what i'm doing wrong
Click to expand...
Click to collapse
I assume you have a sprint note 3, so if you do and you where running NC5 4.4.2 this may help. First go this thread http://forum.xda-developers.com/showthread.php?t=2625332 read through the threads posted there. Especially this thread http://forum.xda-developers.com/showthread.php?t=2600869 That should give you a basic idea of the steps you need to take. Then you will be asked to create a boot img for your Sprint N900P, here is link to an img that is already done for the N900P http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick_IMG Basically you will have to copy and paste a boot img to a formatted/erased ext sd card, via a USB cable from you device to a PC ( provided your PC will recognize the USB cable when connected to your device). Or you can use an adapter to get the sd card hooked up to your PC. Enjoy !!!
jimzweb1 said:
I assume you have a sprint note 3, so if you do and you where running NC5 4.4.2 this may help. First go this thread http://forum.xda-developers.com/showthread.php?t=2625332 read through the threads posted there. Especially this thread http://forum.xda-developers.com/showthread.php?t=2600869 That should give you a basic idea of the steps you need to take. Then you will be asked to create a boot img for your Sprint N900P, here is link to an img that is already done for the N900P http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick_IMG Basically you will have to copy and paste a boot img to a formatted/erased ext sd card, via a USB cable from you device to a PC ( provided your PC will recognize the USB cable when connected to your device). Or you can use an adapter to get the sd card hooked up to your PC. Enjoy !!!
Click to expand...
Click to collapse
Thanks but I got that whole down already.
My issue is that none of the images work or there is just something more to this.At first my pc recognized my phone when i plugged it in (qualcomm hs-usb) but now it's not showing up anymore.
The phone just sits there and vibrates all with the white line like it wants to boot but something is stopping it.
Jtag is my last option as i wanna try and fix it myself.
Oh and i forgot to mention that i had made a mistake and restored my galaxy s4 efs backup.The phone never booted up after that
The weird thing now is that the phone is charging the battery.But it's just constantly vibrating
Somebody please help me
frasslee said:
The weird thing now is that the phone is charging the battery.But it's just constantly vibrating
Somebody please help me
Click to expand...
Click to collapse
Have you tried a battery pull then put it back in and try the 3 button Recovery combo? Atleast you have some life in the device so its not hard bricked.
I've tried everything.If it was soft bricked at least I would get into download mode.But that's all the phone does is vibrate.I just feel like I'm missing something.
It won't get recognised by my PC unless the memory card is out and that's weird.It takes about 5 minutes to pop up in device manager as Qualcomm hs-usb 9008(idk) and as soon as I try the button combo it disappears
frasslee said:
I've tried everything.If it was soft bricked at least I would get into download mode.But that's all the phone does is vibrate.I just feel like I'm missing something.
It won't get recognised by my PC unless the memory card is out and that's weird.It takes about 5 minutes to pop up in device manager as Qualcomm hs-usb 9008(idk) and as soon as I try the button combo it disappears
Click to expand...
Click to collapse
You may have a bad sdcard. I see posts about corrupt sdcards maybe a new card? You have a class 10 card? I have a few debrick tools if youd like them. But ive seen youve already tried that. I feel your pain man I have a brand new hard bricked s4 in my phone graveyard.
frasslee said:
I've tried everything.If it was soft bricked at least I would get into download mode.But that's all the phone does is vibrate.I just feel like I'm missing something.
It won't get recognised by my PC unless the memory card is out and that's weird.It takes about 5 minutes to pop up in device manager as Qualcomm hs-usb 9008(idk) and as soon as I try the button combo it disappears
Click to expand...
Click to collapse
Ok bud here we go, I run a Sprint Note 3 4.4.2 NC5 stock rooted CWM recovery. I downloaded the bootloader backup zip from here http://forum.xda-developers.com/showthread.php?t=2439367 it created a debrick zip, then I extracted it, and it is a 128mb debrick.img file just like the thread states it should be here is the link http://www.mediafire.com/download/c396cy9uxyg7mck/debrick.img you will need to also download an IMG burner program to your PC. Here is the link http://sourceforge.net/projects/win32diskimager/files/latest/download burn the img file to a completely blank/erased ext sd card from your windows PC. Then remove your battery install sd card, install battery and power up device.
A couple things I found, one the sd card size has to mirror the memory size of the device, i.e. 16gb device needs a 16gb sd card. Two the sd card when flashed with the Debrick img file has to formatted as unblocked, and may have to be retitled to be recognized.
Next I tried the Unbrick Creater zip the link is here http://forum.xda-developers.com/showthread.php?t=2651696 and the file it created is here http://www.mediafire.com/download/l290jcibb29q4r0/Unbrick_IMG.gz not sure what to do with it, but it is from my working device. Let me know if any of this works !!!
jimzweb1 said:
Ok bud here we go, I run a Sprint Note 3 4.4.2 NC5 stock rooted CWM recovery. I downloaded the bootloader backup zip from here http://forum.xda-developers.com/showthread.php?t=2439367 it created a debrick zip, then I extracted it, and it is a 128mb debrick.img file just like the thread states it should be here is the link http://www.mediafire.com/download/c396cy9uxyg7mck/debrick.img you will need to also download an IMG burner program to your PC. Here is the link http://sourceforge.net/projects/win32diskimager/files/latest/download burn the img file to a completely blank/erased ext sd card from your windows PC. Then remove your battery install sd card, install battery and power up device.
A couple things I found, one the sd card size has to mirror the memory size of the device, i.e. 16gb device needs a 16gb sd card. Two the sd card when flashed with the Debrick img file has to formatted as unblocked, and may have to be retitled to be recognized.
Next I tried the Unbrick Creater zip the link is here http://forum.xda-developers.com/showthread.php?t=2651696 and the file it created is here http://www.mediafire.com/download/l290jcibb29q4r0/Unbrick_IMG.gz not sure what to do with it, but it is from my working device. Let me know if any of this works !!!
Click to expand...
Click to collapse
Still nothing. I'm going to try all weekend and if it still doesn't work I'll just send it off to go get it jtagged
frasslee said:
Still nothing. I'm going to try all weekend and if it still doesn't work I'll just send it off to go get it jtagged
Click to expand...
Click to collapse
Ok I will keep reading the threads. Have you tried with the 128gb img file on the ext sd card to start the device in download mode ( all three buttons) as opposed to just pushing the power button ? Red that somewhere. I pick up bits and pieces here and there, sooner or later maybe we will find the missing part.
Have you tried to use a USB jig to boot into download mode ? You can you buy them on ebay for $10 or here is video on how to make one https://www.youtube.com/watch?v=jKRrTZayRxU or https://www.youtube.com/watch?v=Rdn5GoRjhn0 it is a different device but the concept is the same.
I was thinking of buying one the other day. Maybe just maybe one a button is not working. I'll order the jig tonight. Or make one this weekend
Later I'm going to swap motherboards and see if it's a button that's causing my problems.
Bless you bro and thank you for all your help
frasslee said:
I was thinking of buying one the other day. Maybe just maybe one a button is not working. I'll order the jig tonight. Or make one this weekend
Later I'm going to swap motherboards and see if it's a button that's causing my problems.
Bless you bro and thank you for all your help
Click to expand...
Click to collapse
Cool just for info type USB jig in Google images. The video from zedomax is pretty good.