Hi all,.. (excuse me for my bad english)
can someone advise me how to update my TP? I get the error 262 when I want to update my t-mobile MDA IV to a newer rom, but it won't update, get the error 262...
I've tried:
Hard reset (several times) the device
Restored the device to factory settings (ugly t-mobile default)
Removed the micro SD card
still i'm not able to update to any rom...error 262
I'm using Windows Vista SP1.
Please advice
Regards,
A.
No Hard SPL installed.
Thanx for the reply
Hard SPL? is that a cab file? where can I find this?
A.
never mind,.. got it!
Flashing now.....
Thx
a.
adonker said:
never mind,.. got it!
Flashing now.....
Thx
a.
Click to expand...
Click to collapse
How dit you fix your problem?
Related
Hi,
I am trying to upgrade my orange m3100 to wm6 (Blackmajic), i have successfully upgraded the bootloader and radio version but when i come to upgrade the WM6 Rom i get error 260 which says check the cable. I have tried on 2 different pc's and different cables.
Basically the phone is connected but when you get past all the tick boxes and press update active sync drops out just before it updates.
Has anyone had this problem or do they know how to solve it?
I have also tried different Roms
Thanks for your help Jason
I have just tried to re flash the spl and the same thing is happening here now :-(
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#error
Tried these still no luck. Any help would be Much appriciated!
Try to read this... http://forum.xda-developers.com/showthread.php?t=299657
I had this same, and Olipro helps me
Got it sorted now!
Thanks a lot
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
dahdout said:
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
Click to expand...
Click to collapse
What IPL/SPL it displays now ? ,Does it get into Bootloaders ? if it still does than download and flash 'wizard_love_rom' hope it'll recover back.
RE:
It just boots into a white screen. If i hold the camera and power buttons together it boots into bootloader mode, and says USB in the bottom corner. (when i am conncected via usb) but the problem is that active sync doesnt recognize it in bootloader mode. I have tried flashing it in many different ways and i have had no success.
When i go home i will try wizard_love_rom.
and as for the IPL/SPL, i will also check that when i get home.
Where can i download the wizard_love_rom?
Thanks for the help !
RE:2
Hello,
Mr IPL and SPL are both 2.25.0001
My GSM: 02.25.11
My OS: 2.18.0.0
Good News
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
dahdout said:
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
Click to expand...
Click to collapse
Glade its working again !
You got a G4 device,it cannot be CID unlocked,but however,it can be upgraded to wm6 or 6.1,read the methods 'HardSPL' or 'SoftSPL' posted as stickies in the G4 forum for upgrading to wm6 or 6.1.
re:3
thanks, you really saved me with your help!
dahdout said:
thanks, you really saved me with your help!
Click to expand...
Click to collapse
Thanks !
Glade you got it working
sorry, but i need help... again
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
dahdout said:
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
Click to expand...
Click to collapse
ok,for error (300)you can use the RUU MUNS already posted in the 'HardSPL' thread,download the RUU_MUNS application extract it to a folder and copy and paste all the files of this extracted to the folder of the Rom replacing all the RUU files in that folder or copy the nk.nbf folder in the Rom to the extracted folder of the RUU_MUNS and then run the RUU,it will start to flash and complete and hopefully fully boot up.
For edge or gprs,you'll have to get network settings of your network carrier or check out the thread from where you downloaded the rom,its uaually posted there or check out the 'Network' thread.
Aquestion to Zabardast_1 ?
294 error , invalid vender ID
what does that means & asolution to it during rom update
ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
I ve run the downgrader but now I m stuck in my bootloader screen. It says:
6#
IPL-V1.00
6#
SPL-V1.20.Olipro
USB
I ve tried to install a 1.2 compatible ROM (Athena_SPL1.2_WWE_WM6.1_2.04D-MiChY).
When running the ROM update utility I get this notification after 1% completing:
ERROR[244]: INVALID MODEL ID
This Update Utility cannot be used for your PDA Phone. Please check your
Update Utility.
HDa3- 9' -S-AUJH
Click to expand...
Click to collapse
I ve tried to reinstall Actice sync as posted as a possible solution earlier. This doens t help with me.
Any thought?
ps. Because of the fact that the updater runed to 1% already I cannot get into my old ROM anymore. So I only can get in the USB or SERIAL bootloader by pressing camera/reset......
Now what......
check in the topic how to fix invalid model id after a bad flashing in this section if you can find an help.
sanderh said:
I ve run the downgrader but now I m stuck in my bootloader screen. It says:
6#
IPL-V1.00
6#
SPL-V1.20.Olipro
USB
I ve tried to install a 1.2 compatible ROM (Athena_SPL1.2_WWE_WM6.1_2.04D-MiChY).
When running the ROM update utility I get this notification after 1% completing:
I ve tried to reinstall Actice sync as posted as a possible solution earlier. This doens t help with me.
Any thought?
ps. Because of the fact that the updater runed to 1% already I cannot get into my old ROM anymore. So I only can get in the USB or SERIAL bootloader by pressing camera/reset......
Now what......
Click to expand...
Click to collapse
Hi
Don't Panic
I Think you are safe because of olipro1.2 spl
1. Take the sim and memory card out
2. Do the hard reset ( Vol down + Reset)
3. run the Michy 2.04 rom 1.2 spl Or Irus 0Pagepool rom
or try Michy's advice
I hope it will resolve the problem.
Good luck
thanks! Removing the SIM card was the solution!
sabes143 said:
Hi
Don't Panic
I Think you are safe because of olipro1.2 spl
1. Take the sim and memory card out
2. Do the hard reset ( Vol down + Reset)
3. run the Michy 2.04 rom 1.2 spl Or Irus 0Pagepool rom
or try Michy's advice
I hope it will resolve the problem.
Good luck
Click to expand...
Click to collapse
HELP
HARD RESET DON'T WORK!!!!!
My Raphael is dead...
1. I flash Hard SPL 1.90.OliNex
2. I flash original Russian ROM and have this message on screen "Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center"
3. I flash stock SPL
and now when I'm trying to flash any ROM or Hard SPL I have on the screen of PC "0% image upgrade in progress" and "0%" on the screen of Raphael
after some time on the screen of PC I see ERROR [262]: UPDATE ERROR
What I must to do?
Help me, please
P.S.
Now when I'm trying to flash HTC_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_R aphael_52.33.25.17_1.02.25.19 I have "Invalid Vendor ID" Message
dishef said:
P.S.
Now when I'm trying to flash HTC_Raphael_hTC_Asia_WWE_1.90.707.1_Radio_Signed_R aphael_52.33.25.17_1.02.25.19 I have "Invalid Vendor ID" Message
Click to expand...
Click to collapse
When you receive "Invalid Vendor ID", than your device is not Hard SPL! Please follow the update procedure again. There must have been something wrong.
DeepThought said:
When you receive "Invalid Vendor ID", than your device is not Hard SPL! Please follow the update procedure again. There must have been something wrong.
Click to expand...
Click to collapse
But when I'm trying to flash Hard SPL I have ERROR[262]
Does any method to flash Hard SPL from SD card exist?
dishef said:
But when I'm trying to flash Hard SPL I have ERROR[262]
Click to expand...
Click to collapse
Read here please http://forum.xda-developers.com/showthread.php?t=425922
taiseer999 said:
Read here please http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
sorry for the offtopic (or not...)
i have tryied many times to connect to my TP using mtty, but no luck. i'm using Vista Ultimate, and can connect and use mtty with my Kaiser, but can't with Raphael.
Is there any special thing i need to do to get mtty working with raphael?
Thanks in advance
Cheers
jcespi2005 said:
sorry for the offtopic (or not...)
i have tryied many times to connect to my TP using mtty, but no luck. i'm using Vista Ultimate, and can connect and use mtty with my Kaiser, but can't with Raphael.
Is there any special thing i need to do to get mtty working with raphael?
Thanks in advance
Cheers
Click to expand...
Click to collapse
Have you remembered to disable USB connections from activesync connection settings?
taiseer999 said:
Read here please http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
i used the MTTY to format the device
but still have ERROR[262] when trying to flash Hard SPL
using info 2 on MTTY i got "HTCSHTC__J15Wаа`HTCE"
but I have HTC Raphael (Touch Pro)
does any way to flash hard spl with MTTY exist?
or may be I can flash ROM with MTTY?
i have this problem whit hard spl
i test it whitout sim-micro sd-win xp-win vista-i dont use usb hub
i use ssple but i had 262 error again and pc was hang on 0%
i have touch pro
i dont want MTTY
it's risk
maby my phon is going to be off for ever
This procedure can damage your phone
Hi,help me pliiiiiiiiz!!!!!
1-my herm100 stuck on windows screen
2-i tried mtty : CMD>task 32
Level=FF
how can i turn it ==>Level=0?????
infos:bootloader:2.03
error 'NO GSM' ???
i tried installing a lot of RUU ROM WM5&WM6 ==>error at 1%
what can i do pliz??help me
hi anf evils
u using a vista pc?
no im using win xp
Try reflashing the SHIPPED STOCK ROM - the rom it came with. This may fix your No GSM problem.
Please note though that once the radio rom gets stuffed it is a SERIOUS pain to get working with a very low success rate.
Good luck...
ultramag69 said:
Try reflashing the SHIPPED STOCK ROM
Click to expand...
Click to collapse
how can i do it, i think that my phone should boot to do it?
my herm stuck on windows mobile screen
and thanks for your replay!
Try a hard reset, hold both soft keys in and reset with stylus. Hold all buttons in until it asks if you wish to reset to factory. Follow directions.
If you haven't already, install Hard SPL, quick search will find it. Then you have to find the ORIGINAL ROM YOUR HERMES CAME WITH... Good luck as this is probably the hardest part...
No guarantees it will work though...
Cheers...
ultramag69 said:
If you haven't already, install Hard SPL,
Click to expand...
Click to collapse
i can not install any hard SPL because i have Level=FF so i can not downgrade to SPL 1.09 or 1.01 (i have now 2.03)
is there solution of this problem
Level=FF??????????????
LEVEL=FF
means that your device is CID locked. I've got the same issue