i upgrade p3400i with (HTC Gene - stock - 1.17.720 - ROM)
and now my Phone is Dead no red or green light
only when i press hard reset key with stylus the red and green key bilk at ones
plz help me
ankit360 said:
i upgrade p3400i with (HTC Gene - stock - 1.17.720 - ROM)
and now my Phone is Dead no red or green light
only when i press hard reset key with stylus the red and green key bilk at ones
plz help me
Click to expand...
Click to collapse
sorry to say its your mistake , you select the wrong Rom .
The 1.17.720 - ROM , its for p3400 not for p3400i
i dont have any solution for you,
maybe somebody can help you
thankx
sprite clone backup
i have taken backup of rom through sprite clone
can any body help me now
i was planning to run gene_hspl_HT8x.exe but it failed.
i am also wish to update rom but for that we need to remove spl hspl first as someone said that newer version are locked for rom update.
for more info on this talk you can see here
http://htc-android.com/viewtopic.php?f=5&t=64&sid=01547ccf0c90499d8f75f30018715da4
my phone is still running.
lots of people i think have 3400i now but this xda-developer forum has no info for this device.
i wish someone could start adding sub forum for this device so that newcomers like us get proper help to the things we do with our device.
regards
mak
india
?
hi atomicmak
i m from india also
can i send my phone to service centre ?
or go to shop and get it replace because it is only 2 day old
i've heared that sony people are doing servicing of htc and they are authorized service centers.
you can surely try to catch them and tell them you messed up with the phone and need recovery and i think they will be able to solve your issue with some money they charge.
hope this helps.
mital
Unbrick solution
Have you people really checked the following post?
http://forum.xda-developers.com/showthread.php?t=434349
ankit360 said:
hi atomicmak
i m from india also
can i send my phone to service centre ?
or go to shop and get it replace because it is only 2 day old
Click to expand...
Click to collapse
try pressing power key and camera button and press soft reset using stylus when you get into the boot loader try to flash with the stock ROM. Make sure that your SPL is changed to normal from orefklovs ... if the SPL is changed they will tell you that the warranty is void now. i got my board replaced after i flash with the stock ROM. which state are you living in? I think somebody has introduced an unbricker try that also..... my advice is dont do anything in excitement..... please study and research everything after that apply it in the phone....... gudluck.....
no man i try it but it not showing bootloader i think ipl is also damage
ankit360 said:
no man i try it but it not showing bootloader i think ipl is also damage
Click to expand...
Click to collapse
try again and again (press camera and power button together and soft reset with stylus) until you get into into the botloader screen... at once flash with original stock rom and make sure olipros SPL is changed to normal SPL.....it worked in my set... i dont know any details...
to http://www.dig-cn.com/forum-110-1.html
find the solution
to suchunjian
in that link i saw one spl mentioning that p3400i. is that really for the new gene. i dont know that language. if it is for the new gene then please inform all the gurus about it.
i upgrade p3400i with (GENE HARD SPL)
and now my Phone is Dead no red or green light
only when i press hard reset key with stylus the red and green key bilk at ones
plz help me
my gene dead :?(
i have same issue bcoz wrong flash i go to htc service crntre they repair it
if u don't have warranty use jtag method
P3400i is Dead HELP ME
y device Info
Serial No. - HTC8xxx
ONBL - 1.06.0000
SPL - 1.06.0000
The handset can only enter the safe mode, brushes any software to 2% to be defeated
thanks:
Closed as per OP Request.
Dave
Related
HELLO my friends!
Can you help me to revive my qtek 9100 whit Jtag interface.
I need testpoins for Jtag of G4 mainboard (TDO,TDI,TMS,TCK...)
Thanks in advance for ALL!!!
To the best of my knowledge nobody has revived their wizard using JTAG contacts. It might be a myth, or just unproven yet.
Wizard jtag Done yeeeeehaaa!
ok i made it happen n have done that successfully
i made a mistake of doing hard spl thing before downgrading to t mobile custom rom, first it was stuck on splash screen n than was totally dead after resetting
i searched n found the procedure of jtag it n bring back to life, im very happy i did it with slight modifications according to my logic n made it till bootloader, much thanks to all who left so many ideas and materials at different places. ok now my problem is that it does the whole flashing but after that it gets back to boot loader with the same incorrect ipl spl
i guess ill be needing a monster pack with ipl spl included i tried ruu mun otherwise the nb sawith the custom gave invalid tool msg. any ideas guys?
fsl13 said:
ok i made it happen n have done that successfully
i made a mistake of doing hard spl thing before downgrading to t mobile custom rom, first it was stuck on splash screen n than was totally dead after resetting
i searched n found the procedure of jtag it n bring back to life, im very happy i did it with slight modifications according to my logic n made it till bootloader, much thanks to all who left so many ideas and materials at different places. ok now my problem is that it does the whole flashing but after that it gets back to boot loader with the same incorrect ipl spl
i guess ill be needing a monster pack with ipl spl included i tried ruu mun otherwise the nb sawith the custom gave invalid tool msg. any ideas guys?
Click to expand...
Click to collapse
HEY lissten HOW DID U GET THE places where to solder the JTAG cables to motherboard ? please answere
Wizard jtag test points
I found this on another site, hope it is some help.
I am extremely sorry that ihave been away and couldnt respond
Ok im all ears and here to help you till you make it to the end
now tell me your actuall status and what you need
i luckily have all the files needed to jtag but
right these unfortunately i have a very bad internet connection
PM me and we ll take it from there
dont worry i am with you now
Mr FSL13
Can you please come to PM or IM
i have also a one WIZA200 Dead while Update
and i need to JTAG it
its very urgent
can you please help me in this problem?
Thanks in Advance
[hello
thank you , i woulid if you cna help me to make the same , means jtag for my htc wizard i did the same mistake , is dead now, , thank you
souriant said:
[hello
thank you , i woulid if you cna help me to make the same , means jtag for my htc wizard i did the same mistake , is dead now, , thank you
Click to expand...
Click to collapse
RIFF JTAG Wizard look at http://www.jtagbox.com/tag/security-features/
hello,all the masters of this site and pda phones....i have a spv m3000 from orange G4 locked and tried to flash t-mobile radio prodigy with softSPL...it went on first screen with the beer image and got stuck on it...after i removed my battery it wouldn't start,enter bootloader,soft,hard reset it wont even charge(red led not blinking) my computer doesn't recognize it.i tried giving the batey a 9v,6v shock and nothing happened phone is still dead...i'm not a good electronist so i can't use the method to rewrite the inernal memory soldering wires...etc....could you give me a solution???i'm desperate(
xardas_90 said:
hello,all the masters of this site and pda phones....i have a spv m3000 from orange G4 locked and tried to flash t-mobile radio prodigy with softSPL...it went on first screen with the beer image and got stuck on it...after i removed my battery it wouldn't start,enter bootloader,soft,hard reset it wont even charge(red led not blinking) my computer doesn't recognize it.i tried giving the batey a 9v,6v shock and nothing happened phone is still dead...i'm not a good electronist so i can't use the method to rewrite the inernal memory soldering wires...etc....could you give me a solution???i'm desperate(
Click to expand...
Click to collapse
Well, there's no such rom 't-mobile radio prodigy',you are mixing things here.Its either Radio Rom or OS(Rom). Assuming by your post 'the beer image' as you say,it must be the "Button's Rom 1.05" with IPL/SPL 1.05 (G3 Bootloaders). Did you flash the Button's Rom 1.05 on your G4 device,well,if so then,its a "BRICK",coz flashing a G3 Rom with IPL/SPL in it'll certainly brick a G4 phone,Now nothing can be done with it.
well i've heard something of leaving it 24 hours without the battery and shoking the battery but no luck so far...isn't there any program that would recognize this brick as a flash memory so i could just put the bootloader back?and yes i have put a g3 rom on my g4....and it makes me feel like an idiot...can't i just jump start the thing into the bootloader?(T-Mobile_UK_2.19.11_Radinly - this is what i flashed)
xardas_90 said:
well i've heard something of leaving it 24 hours without the battery and shoking the battery but no luck so far...isn't there any program that would recognize this brick as a flash memory so i could just put the bootloader back?and yes i have put a g3 rom on my g4....and it makes me feel like an idiot...can't i just jump start the thing into the bootloader?(T-Mobile_UK_2.19.11_Radinly - this is what i flashed)
Click to expand...
Click to collapse
Are you sure it was T-Mobile_UK_2.19.11_Radio only which you flashed and not the Button's Rom 1.05 ? coz flashing any Radio rom will not Brick any phone,regardless it being a G3 or G4,coz it doesn't include any IPL/SPL (Bootloaders) in it,its safe to flash to any G3 or G4 phone.
But what about you said it boots up to splash screen with a 'Beer Mug' on it,coz only Button's Rom splash screen displays a Beer Mug on it.
i'm certain this is what i flashed...and it was a beer mug(at least half of it) now it doesn't do anything...after i removed the battery it died
Could it be the battery?????
xardas_90 said:
i'm certain this is what i flashed...and it was a beer mug(at least half of it) now it doesn't do anything...after i removed the battery it died
Could it be the battery?????
Click to expand...
Click to collapse
Strange !!!
A Radio Rom never flashes any splash screen and it never displays any splash screen,especially a Beer Mug splash screen,you must have been mistaken and downloaded and flashed the Button's Rom 1,05,which has G3 IPL/SPL in it,and now its Bricked,nothing can be done with it to revive,except replacement of the 'DOC Chip' (M-System Flash Chip),which I'm afraid is not possible by anybody other then the manufacturer/vendor of the device.
just found out that in the directory named T-Mobile_UK_2.19.11_Radinly was CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE....did i brick it?...and how much would it cost to change that chip?...any place i could order another motherboard? maybe it's another way to do it...maybe someone does know how to use JTAG...give me some advice please...
xardas_90 said:
just found out that in the directory named T-Mobile_UK_2.19.11_Radinly was CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE....did i brick it?...and how much would it cost to change that chip?...any place i could order another motherboard? maybe it's another way to do it...maybe someone does know how to use JTAG...give me some advice please...
Click to expand...
Click to collapse
!
YUP !!! there it is,I was correct, its Button's Rom 1.05.
Well,yes ! its "BRICKED"
Only,manufacturer/vendor can provide you the motherboard or tell you the exact cost of it,or you can try the Ebay if they have it or can provide it.
Secondly,its still not known or if anyone can revive it through 'JTAG' ,guys here have been working on it,but were not successful and stopped trying it,you can have further info on it by checking out this link or 'Search' through google.
http://forum.xda-developers.com/showthread.php?t=274766
one more question and that's all...will the orange service or repair center notice that i've been "playing" with the device?maybe with a little luck they will replace it..or replace the motherboard :-S...thank you o much for helping
well....to all the readers of this post...i didn't manage to revive it through any method and decided to send it to the provider repair center...i have sent a message to caesar54 who managed to revive his wizard using jtag and waiting for a reply....IMPORTANT : DO NOT FLASH YOUR G4 DEVICE WITH A G3 ROM IT WILL BRICK YOUR PDA (I JUST FOUD OUT THE HARD WAY) SO REMEMBER..IF YOU DON'T KNOW WHAT YOU ARE DOING....DONT DO IT...i will post updates on what i have done with mine if someone intersted...
xardas_90 said:
well....to all the readers of this post...i didn't manage to revive it through any method and decided to send it to the provider repair center...i have sent a message to caesar54 who managed to revive his wizard using jtag and waiting for a reply....IMPORTANT : DO NOT FLASH YOUR G4 DEVICE WITH A G3 ROM IT WILL BRICK YOUR PDA (I JUST FOUD OUT THE HARD WAY) SO REMEMBER..IF YOU DON'T KNOW WHAT YOU ARE DOING....DONT DO IT...i will post updates on what i have done with mine if someone intersted...
Click to expand...
Click to collapse
Wish you a very goodluck there ! hope you get it working
thank you very much zabardast....i went to the orange shop where i was instructed by someone "high ranked" and someone over there told me that they have a tool that writes software even when the phone is dead...probably through a service cable or something...they said it would be back in 2 weeks maximum...and i will be informed of the price of the repair wich i will post (including my decision) anyway agan "DO NOT FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING"...hope it will get it back after 1 week functionally and cheap...i will search other forums and find posible solutions that i will post...till' then...good luck and work safe
until my phone comes back repaired or not i'm searching for an alternative...does anyone have a wizarrd to sell?preferably a broken one...broken display or something...but with the mainboard intact?
hello xardas_90
i have a recently bricked wizard (xda mini s)
now we are working on finding the jtag test points on the main board to reflash the
bricked 1 , so i am glad if u join us in thread (( Dead WIZARD Never! Let's REVIVE ))
to share info.s and to reach our goal . please join us
well when the board comes back be sure i'll help...but there would be another soluution...we could find a site or store that sell DOC chips...the rest is simple...we just need that chip...i'll search other forums for wizard jatg points...i really like your initiative...
There Is Hope
1.Se poate scrie bootloader prin JTAG
2.Nu exista nici un DOC cip.
3.Nu va putem furniza informatii gratuite service pe mail incercati pe www.flashgsm.ro/forum
----- Original Message -----
From: Rebirth A.D.
To: office
Sent: Friday, May 02, 2008 9:17 PM
Subject: Re: reparatie
aveti cumva DOC cipul care contine bootloaderul?sau o placa de baza second hand?...sunt din ploiesti si nu pot veni in bucuresti momentan...nu se poate scrie bootloaderul prin JTAG?multumesc pentru reply si astept un raspuns
Translation : Original message : do you have the DOC chip that contains the bootloader?i'm from ploiesti and i can't come ti bucharest for the moment....can't we write the bootloader through JTAG? Thank you for the reply and i'm waiting for your answer...
Answer
1 - IT CAN BE WRITTEN THROUGH JTAG
2-no doc chip
3- use out forum because we can't tell you how to repair your phone free through e-mail
a fiend of mine wich works at a repair center said he could discover JTAG points but omly with a board that is functional...anyone out there willing to sacrifice or sell?i'll post news on JTAG
so it is a good news , that guy could help , keep trying with me.............
Where r u xardas_90 ??!
any news about ur device , jtag
nothing
nothing new....ssince i don't have a functional mainboard...nobody can tell me the jtag points....still waiting for my device to come back from the provider...i'm waiting for 2 weeks...
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
hi guys..
i hav a gene 100 or a p3400..
it went dead two days back as i was listening to music..i charged it up again but it just didnt start.. When i press the power button, the green light lights up and nothing else happens...
PLLLLSSSSS help......
gene
the gene doesnt even repond to the resets mentioned in the forum..
pls help me with any software or smthing..
plsss...
dead GENE- TRY THIS
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Tried it once...
hi bryan..
thnkx for ya reply but i'v already done that but got no responce..
Can i fix it by flashing or smthin??.. i'm new to these things ...
Can you explain to me ... to what extend the device is screwd.....
Another P3400i bricked
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
its isnt startin up
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
shahabaz said:
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
Click to expand...
Click to collapse
Your battery is finished. I started getting that when my charger got messed up and starts taking power out of the battery instead of putting it in. Take out the battery,put it back in, then plug it to your PC and leave it there for a while.
mailforkrishna said:
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
Click to expand...
Click to collapse
If your s\n starts with 814 - there is no solution now
Daemon_Hell said:
If your s\n starts with 814 - there is no solution now
Click to expand...
Click to collapse
no it is HT816FW01645 is there any hope
i have the same
my ht807
is it repaired ?
the same problem for me.
s/n start with HT829
any solution to recover?
to all p3400i guys
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
go4thoman said:
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
Click to expand...
Click to collapse
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
mailforkrishna said:
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
Click to expand...
Click to collapse
try to hard reset it and get the boot loader and flash with it the stock rom for p3400i i will give the link soon. my friend did it for me. then i send it to bangloure service centre, now waiting for their reply. They said that if we try to flash it our warranty will be void..... dont know what to do now.......
GENE 100 dead (stuck on bootloader)
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
If you have not completed 14 days after buying the device, just take it to HTC service center sying that your device is not booting. At least in my case, those guys couldn't figure out what is the cause (see how efficient they are ) and I got a replacement !
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
mGforCe said:
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
Click to expand...
Click to collapse
What is your serial, is it P3400i
basha said:
What is your serial, is it P3400i
Click to expand...
Click to collapse
Nope... its P3400 which came with WM 5.
P3400i(Gene100) after flash bricked or suck bootloader mode
ROM file name RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship
how to solved plz help
or press on off key blink only keypad light
ok first find out if it is new gene or old . if it is new gene do a hardspl of oref , if it is old do a hard spl of olipro . u have to do this in bootloader mode . after flash ur cooked rom of old or new gene . do not upgrade ur gene with orginial rom like asia and all . u have to only put ur cooked rom or else u device again gets bricked . and ur orginal rom has spl and all so it had a chances to brick . hope u get the problem solved
rahmaneee said:
ok first find out if it is new gene or old . if it is new gene do a hardspl of oref , if it is old do a hard spl of olipro . u have to do this in bootloader mode . after flash ur cooked rom of old or new gene . do not upgrade ur gene with orginial rom like asia and all . u have to only put ur cooked rom or else u device again gets bricked . and ur orginal rom has spl and all so it had a chances to brick . hope u get the problem solved
Click to expand...
Click to collapse
how can i find out it is old or new Gene...........?
There are many ways to find out about gene that is old or new , if ur gene is shipped with orginal wm6 it is a new gene and if it is wm5 it is a old gene . Anyway another good method it hardspl loipro and install cooked room ... If it sucuessfully went inside the os it is old gene and if it again stucks in boot screen ... U need hardspl oref and to update new gene roms .. Thats all the way we can find out about old and new gene
rahmaneee said:
if ur gene is shipped with orginal wm6 it is a new gene and if it is wm5 it is a old gene .
Click to expand...
Click to collapse
no this is not the right way to identify them, one of my friend's GENE came with WM5 with sr no starting from HT8 series and it is a new GENE
one of my friend's GENE came with WM5 with sr no HT7 and it was also a new GENE.
The only way to identify it correctly before bricking is the SPL date method.
See my Sign for the tool to identify the Old-New GENE...(SPLCHK)
But this tool only works if ur device is in alive condition...
before flash my GENE(P3400i) Rom Version 1.17.720.1_4.1.13.34_02.79.90
use same version to flash my gene RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship this file n full flash dead my Gene no bootloader suck screen any option to back my GENE Normal .............?...
dude remove ur battery and put it again and then press the camera button and then power button to enter bootloader mode .
rahmaneee said:
dude remove ur battery and put it again and then press the camera button and then power button to enter bootloader mode .
Click to expand...
Click to collapse
also try this same problem only key pad light blink
@ Okay so lets start it afresh, first tell me from where did you download the ship rom you flashed, if it was posted on the forum than that would be a old gene rom as there is no ship rom for new gene available in the forum, this could help in knowing if your device is new or old.
Regds,
harry_01 said:
also try this same problem only key pad light blink
Click to expand...
Click to collapse
remove the battery for 20 seconds and press power button for 5 seconds then put in the battery again and then press and hold the camera button and then press the power button(camera button should be kept pressed at this moment) to enter bootloader mode .
vaibhav_batra_the_techguy said:
remove the battery for 20 seconds and press power button for 5 seconds then put in the battery again and then press and hold the camera button and then press the power button(camera button should be kept pressed at this moment) to enter bootloader mode .
Click to expand...
Click to collapse
and in some cases (like mine), you need to soft reset instead of pressing power button.
coolaj said:
@ Okay so lets start it afresh, first tell me from where did you download the ship rom you flashed, if it was posted on the forum than that would be a old gene rom as there is no ship rom for new gene available in the forum, this could help in knowing if your device is new or old.
Regds,
Click to expand...
Click to collapse
this rom download on this forum RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship
or flash time show replace old version 1.17.720.1_4.1.13.34 to new version 1.17.720.1_4.1.13.34 mean same full 100% flash but after full flash set dead my bad luck
can you tell which thread you got the link, or do one thing there is a stick thread in the forum as 'how to cook for gene' there are tools to download, now download the tools and follow the instructions to extract the rom which you downloaded there will be a spl.nb file extracted forom the nbh file, open the spl.nb file in a notepad and search for bootloader date if it is 12th march then its a old gene rom, this will mean that you have a new gene.do this much and reply.
EDIT: once you are confirmed that you have a new gene you can try the Orefkof Unbricker for new gene, you will find it here http://forum.xda-developers.com/showthread.php?t=472169. just follow the steps for recovering your device via Orefkov Method.I am 100% sure your device is New Gene but you have do the above steps to be 101% sure.
Attaching Nbhextract no need to download tools
coolaj said:
can you tell which thread you got the link, or do one thing there is a stick thread in the forum as 'how to cook for gene' there are tools to download, now download the tools and follow the instructions to extract the rom which you downloaded there will be a spl.nb file extracted forom the nbh file, open the spl.nb file in a notepad and search for bootloader date if it is 12th march then its a old gene rom, this will mean that you have a new gene.do this much and reply.
EDIT: once you are confirmed that you have a new gene you can try the Orefkof Unbricker for new gene, you will find it here http://forum.xda-developers.com/showthread.php?t=472169. just follow the steps for recovering your device via Orefkov Method.I am 100% sure your device is New Gene but you have do the above steps to be 101% sure.
Click to expand...
Click to collapse
this rom download on this page
http://forum.xda-developers.com/showthread.php?t=396744
harry_01 said:
this rom download on this page
http://forum.xda-developers.com/showthread.php?t=396744
Click to expand...
Click to collapse
This is a old gene rom, did you tried the above steps i told
coolaj said:
This is a old gene rom, did you tried the above steps i told
Click to expand...
Click to collapse
Tried with step 5 using Orifkov method but unable to go to Bootloader mode, tried several times. Unable to detect USB Mode Pls Help.
Read the instructions carefully and follow each and every step as said, for entering in bootloadeer hold camera button and use stylus to press the reset button which is next to the charging base, if you are using vista then follow the instruction to update the usb drivers as it is stated in the thread it wiill detect the usb
once you are done with orefkov method your device will be stuck at a white screen with htc logo and ipl,spl,radio,os details spl should be 1.07.oref now dont worry and just download a new gene rom from this forum and flash it your device will work fine,and do not try to update the Spl again.
regds,