i downloaded a ROM upgrade from the link below it also gave a few instruction which i followed and ended up a with a costom ROM upgrade , ran it with my phone still sync to the computer everything goes well until after the fone restarts it self once the upgrade has finished.
it reaches to and past the htc screen right at the begining and then comes to the screen after that where the windows logo is in the middle and beside it written windows mobile and underneath was written this:
M 04---------------------R 1.58.16.27
B 04---------------------G 25.61.30.03H
--------------------------D 2.12
in red without the dashed lines all allined similarly to this and from that point the screen does not change at all.
i have tryed to hard reset by using the button at the back while both the green and red button is held down but still the situation stays the same.
this is the link to the thread i downloaded the ROM upgrade from:
http://forum.xda-developers.com/showthread.php?t=402752
please can someone help me
Related
Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
try this..
http://forum.xda-developers.com/showthread.php?t=361335
Rivadex said:
Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
Click to expand...
Click to collapse
Hey hey~~~
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Rivadex said:
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Click to expand...
Click to collapse
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
read all !!!!
Run PVtemp to recover...................................
Thanks for your help. I will have a look tomorrow because even though i am reading your instructions i am still not understandingh it.
1. The first method isnt possible because i cannot see the device to move files into it
2. With the second method i cannot find the PVTemp you mention
I am not too good with this so it will take time for me to get what your saying.
Thanks again - i will charge my phone overnight to make sure my battery is ok
Update: Phones now working fine, it was my battery that needed charging
Thank you dioxda2 and duato for your help
Hi
When I turn on my phone all it shows is red, green, blue and white stripes across the screen with the following text:
ROSE100
SPL-1.54.0000
MicroP-Rose (LED) v10
MicroP-Rose (key) v5
PCBID 0x80
RID 0x0
At the bottom of the screen it also says "Serial", but displays no actual serial. Please see attached pic.
Please help guys. Problem initially started when phone collected dew on cold morning (camping).
Thanks!!!
You seem to be in the "flash screen".. I did that on my phone by accident, pressing power and one of the volume buttons.. Try pulling the battery out, put it back and see if it starts normally.
I have the exact same problem. Mine happened all of a sudden for no reason after turning my phone off and trying to turn it back on. Please post if you find a solution
Well, you can try to reflash your ROM. Many official ROMs can be found here.
Hi, I got the roms, but where can I read how to put the new one on my phone using my computer?
Ok, I got it I just run the .exe file to update my rom. However, there is just one problem, it says you should connect activesync to your phone. How tf do I connect activesync as my phone does not load any OS?! I tried without activesync but it doesnt work - it freezes on 0% update and after a while it runs some kind of recovery steps. So how do I get pass the activesync thing? Thanks
You can't upgrade ROM via activesync if u don't have acces to windows mobile, you can do it only from SD card.
Here http://www.megaupload.com/?d=M7OEOF2N (pass: xda) you find a Rose service manual and at the page 45 you find "ROM Image upgrade thru SD card" ...it's not complicated, read carrefuly.
Ok I read it but when I press the power button for the second time it says "No image file". I renamed the file to RoseIMG.NBH. What am I doing wrong?
I don't know what are you doing wrong ...try to rename the file to "ROSEIMG.nbh". Where did you download the ROM? ...I recomend you to put the same ROM you have on device because you don't have installed HardSPL (and I don't know if you can install it from SD card). Here http://forum.xda-developers.com/showthread.php?t=599520 are the officials roms for S740.
PS: I never tried this method on S740, I do it once on tytn II and works perfectly.
Here is how I got it to work:
Left it in the boot mode with the colorful screen until the battery is decharged enough, then tried to put it on again and it automatically turns off. So I put the USB cable in it and walla it started loading the battery and it turned on automatically and loaded WM. However, I still can not flush my ROM even through activesync.. but I am glad I can use it again.
something many forget with this fault, and I have seen quite a few is it is often not a rom issue but a hardware problem... in this case it may be a faulty up volume button, or maybe the plastic cap has shifted keeping the button held down, does the button still click ok?
The monet was a swine for the camera button giving up the ghost and doing nothing but dropping to boot loader......
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
king roro said:
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
Click to expand...
Click to collapse
Hi,
Since you have enough experience in flashing custom ROM, I would suggest you the following ways:
1. Make sure battery is at least 50% and the battery pins are not bent
2. Format your micro sd card to fat 32
3. Find and download the CORRECT STOCK ROM. You can download it from htc website if your hd2 is non branded, or you can download it from your carriers website if your hd2 is a branded one. Make sure the downloaded file is not corrupt due to download process
4. Extract the downloaded file using 7 zip or winrar. Find the file named: RUU_signed.nbh Then, rename it to: leoimg.nbh then copy it to the root directory of your micro sd card
5. Go into boot loader and follow the onscreen instruction. If therenis no hardware issue, it should work.
Good luck ...
thanks m8 but I've checked the pins and changed the battery with fully charged one ..
but it's no boot loader mode ... its completely off
thanks 4 ur support
Not offering solution, just an observation,,,, hanging at HTC screen and only occasionally booting, plus flashing hanging at. 9% is a bad sign, sometimes associated with a stuck radio, and/or/caused by thermal issues.
Try chilling the phone with stock nbh ready to go on SD card, in sealed bag in fridge/freezer for a while, then try to SD flash.
If flashing starts, (white screen blue writing) keep an eye out for "rsa radio fail" or similar.
if the flash goes well, but then later the problem returns, it's pretty conclusively hardware.
thanks buddy for the advise but as I mentioned b4 ...
the device doesn't boot anymore ... and yeah it's Hardware bug I think.
best regards
Hi,
I just bought a HD2 secondhand from an online shop which was promised to me to be in working condition.
Tried booting it up and it was stuck at the Windows Mobile screen.
Managed to flash HSPL 2.08 (after 3-4 tries?) but when I tried to flash the radio, the tool indicated the current image was... nothing.
It simply didn't display any image version, I thought that was a little strange but I tried flashing 2.07.51.22.2 on it anyways.
A few other versions later (2.12.50.02.2, 2.14.50.02.2, 2.08.50.05, 2.15.50.14) and still no luck (it usually fails around 96% when I do it via USB and its stuck at nearly maximum when I try an SD flash)
Not entirely sure where it came from, but it is HTC branded T8585.
I've tried a Task 29 (though LEO Advanced RUU) which was successful. But still no luck with the radio.
Phone won't boot up most of the time - but I can still enter the bootloader.
Various screens I've got so far:
HTC screen (white background)
Screen with exclamation mark and triangle
Screen that says software update has failed
Sooo... any idea if the phone is salvageable? I've been looking around the forum but I've tried most of the above and don't know what else I can do.
Cheers.
Edit: Doesn't actually say FAIL when I use an SD. It just gets stuck at like 99/100% (full bar) with the words Update In Progress... and never progresses.
Hello!
I use android with the htc hd2 for about 1 year ago, and the i want to back to windows mobile. I came from android, and when i finished the rom install the phone is stop when the windows mobile (orange color installer,please wait while your device is starting for the first time...) installer is finished it's always power off or just do nothing. I try to install a custom too. Neither the original and neither the custom din't work. The android work great, but i want the windows mobile 6.5.
If you have an idea please tell me.
Sorry for the bad english.
First of all, congratulations to your first post.
How have you tried to install WM?
Have you removed HSPL?
Have you changed RADIO?
Maybe you will have a look on this thread: http://forum.xda-developers.com/showthread.php?t=1421179
uli71 said:
First of all, congratulations to your first post.
How have you tried to install WM?
Have you removed HSPL?
Have you changed RADIO?
Maybe you will have a look on this thread: http://forum.xda-developers.com/showthread.php?t=1421179
Click to expand...
Click to collapse
I find my problem:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
What can i do?
somebody have the same problem?
The touchscreen isn't work in windows mobile, but if i install android or windows phone 7 the touchscreen is working
Mene44 said:
I find my problem:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
What can i do?
somebody have the same problem?
The touchscreen isn't work in windows mobile, but if i install android or windows phone 7 the touchscreen is working
Click to expand...
Click to collapse
I changed the radio the spl,hspl, rom(custom,orginal)... but nothing
bear with me here, guys, as i am new to not only this site, but to the world of htc and smartphones all together...i apologize in advance!
so my friend had this htc lying around and said i could have it since my previous phone took a crap. it's on tmobile so i was going to have it flashed over to at&t.
however, the phone seems to be a brick....it will not boot past the initial "stick together" screen.
yes, i tried the hard reboot...pressing and holding volume up+volume down+power button. it takes me to the screen asking if i want to reset the device..i hit volume up to confirm. it goes through the reset. i hit volume up to boot the device. it gets to the "stick together" screen, vibrates 7 times, and freezes.
well, it was doing that anyway...but only when plugged in. the little orange light used to turn on when i connected the charger--now nothing.
and now it won't let me into the hard boot screen again. just...black. removing the battery and replacing it does not work.
i had taken it to the gentleman to flash it to at&t, not knowing this problem existed. he called me (because i left the phone there, since he had a line of people) to tell me the phone was freezing on that screen. i gave him the ok to do what he called a "hard wipe". i went back for the phone this morning and he said he did the hard wipe, and it was still freezing--told me the phone was only good for parts at this point.
so i took it home. i plugged it in, and i did what i described above.
what the heck do i do?! i would love to be able to rescue this phone! like i said, i'm totally new to all of this so if you're going to throw terms at me like RUU (which i saw all over this site), i have no idea what you mean so please post a link to another thread or something that can explain these things to me, if you do not want to do so yourself.
oh, my friend also said she had put an at&t sim card into the phone (unflashed, still on tmobile) before and tried to turn it on...but nothing happened. could that be what caused the problems?
UPDATE: took the battery out for approximately 10 minutes. put it back in, and the phone turns on again...one short vibration while the screen is still black, then the "stick together" screen pops up and the phone vibrates 7 more times....annnnnd freezes again. its also starting to get very hot on the bottom, backside...