I have a new p3400 that upgraded by me from windows 5 to 6.1 wwe gene 100
after upgrading my problem is that my battery power status always show 100%
and when i charge the mobile it shows green light and before upgrading my mobile it shows red light.what i hav 2 do plsssssssss help me 4 this plssssssssss.
try a hardreset might do the jo
Which ROM you actually used? Give link if possible. The problem is due to bad registry settings. Try a hard reset, if it doesn't works, flash another rom from this forum. THere are plenty of ROMs now.
solution...
Hi,
even i was getting same problem on my battery. My problem was the charger. The charger was working wrong. I will suggest u to charge ur cel with the data cable. and c once. it may work fine.
Thnx,
Chanchal
Related
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
hello to all xda-dev's.my t-mob mda compact got stuck at bootscreen while doing a upgrade to wm6.i tried to install many rom's in it.but only & only wizard loverom worked to get a today sreen.but(no volume+0%battery even if battery is fully charged coz i tried the battery in a different wizard).plz tell me exaxt rom which should work with my following configuration.
ipl-2.06.0001
spl-2.06.0001
these r the errors i got with different roms i tried to flash
1)T-MOB COMPACT OFFICIAL(TM-PHONEDOWNLOADS.COM)-error120 COUNTRY ID ERROR.the rom image u r trying to use is not made for ur mobile.
2)FARIA'S ROM-after flashing through shelltool method it 1nce again stuck at bootscreen mode.
3)VLODECK'S ROM-ur battery is lower than 50%.even when it is 90% charged.
now plz guys i couldnt have explained it more.plz help me.I will be thankfull to the person who helps me.
Battery problem is related to Radio ROM, try to upgrade it.
but when i tried to upgrade radio rom it says low battery(coz its showing 0%)is there any other method to upgrade radio rom(ie may be in bootloader mode).plz guys tell me coz iam satisfied with wizard loves rom if it works flawlessly(ie no battery issue & volume error
Shut down the device completely, then you can charge your Wizard through AC adapter.
After the device is fully charged (Red LED changes to Green), Enter bootloader (Press Power, then hold Camera button) and run RUU to upgrade it.
now i had upgraded my radio rom to 2.66.but still both the prblm's are persisting.no loudspeaker sound & always 0 % battery.plz plz helpme
actuall i think i need to download the official t-mobile rom from t-mobile.com(us) but its not getting downloaded(coz it needs a valid t-mobile no. or something like that.can anybody help me in this.iam from india.
well it will be a paper weight.take it back to the store
i was trying to upgrade my G4(O2 XDA mini ) device to WM 6 , which previously i hav done to many of my friends devices , now my device is neither switching on nor even getting charged . if i connect to AC Powersupply also its not getting charged ..............CAN SOMEONE HELP ME OUT . I WULD BE GRATEFUL TO THEM . PLEASE HELP ME OUT ......
sorry buddy if its not turning on or charging, you've gotta brick
balugv said:
i was trying to upgrade my G4(O2 XDA mini ) device to WM 6 , which previously i hav done to many of my friends devices , now my device is neither switching on nor even getting charged . if i connect to AC Powersupply also its not getting charged ..............CAN SOMEONE HELP ME OUT . I WULD BE GRATEFUL TO THEM . PLEASE HELP ME OUT ......
Click to expand...
Click to collapse
I'd suggest you confirm whether the battery is completely discharged by borrowing one of your friends batteries or charging your battery up in an external charger.
If you have brick'd it, (which i really doubt) then you are screwed.
Try using another battery, and flash the wizard Love rom to recover it
the only way to brick ur phone is if u flashed ur g4 device with a g3 rom. if u did this, u do have a bricked phone and ur only option (as far as i know) is to send it back to cingular and ask them to reflash the spl back on. Lets hope that its just the battery. good luck.
hi everybody
i have imate jamin g4
i tried to upgrade it
but it wait in three clolor screen
not open not upgrade
always resetting
when put usb or charging wait 1-2 min and start to reset (off-on)
i tried temp rom and tried lazy tools hard spl
but not change always reset
maybe died
when it start to upgrade it start to download but it not end bcs reset, reset,reset
pls help me can i recover it
in three color screen
IPL 2.13.0001
SPL 2.13.0001
right up corner RUU
flash first WM5 rom and don`t cry.
i try to flash but when i put usb cable
it start to upload
after %20 or %5 or %42 it reset and off then on
Is your batty over 50 % ?
i dont know bcs i not see anything
i put to charger but it continue to restart
Charge your batty, with the orig. charger - After 1 hour, give it a try, and go to the bootloader modus, than take your USB to the PC and flash a WM5 Rom. Read here some treads, this is not a new prob.
ok be try with orginal charger
and write here to you
hi there
i search original charger but not found it
i make it from nokia charger and try to charge
jamin not restarted )))))
it now at charge after charge be try flash it
if it run i write you
thanks for you
i am ver happy thanks you NEO130 my jamin is run
but network signal is very low can i adjust it
Maybe take another radio Rom. Search for it, in the treads. I don`t know where.
tnural said:
i am ver happy thanks you NEO130 my jamin is run
but network signal is very low can i adjust it
Click to expand...
Click to collapse
Hey mate,
Whats the version of your radio rom?
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
Good help&work NEO130
dead iamte jama
can any one please help me as welll....
i was try to update my rom from dnw.exe....
i was trying to upgrade my rom to wm7
when i was upgarding bootlaod.nbo my jama hang
when i remove the battery and install it again since then it wont start
no screen not even charging light is blinking its totaly dead
can any one please help me
before upgarding i was perfectly using WM.6.5
please brother help me out from this
...Why don't try a 'basic' wm6.1 rom and try to upgrade step by step?
Try some Bikertibi rom.
bilalpai said:
can any one please help me as welll....
i was try to update my rom from dnw.exe....
i was trying to upgrade my rom to wm7
when i was upgarding bootlaod.nbo my jama hang
when i remove the battery and install it again since then it wont start
no screen not even charging light is blinking its totaly dead
can any one please help me
before upgarding i was perfectly using WM.6.5
please brother help me out from this
Click to expand...
Click to collapse
There is no WM7 for the prophet and u used a next upgrade tool not recommended really did you not know that WM7 have not came out as yet? am sorry I cant not help you u will have ether buy a next device or go back on the forum you got the files from tell them what happened and ask them for a solution but you should of stayed on windows mobile 6.5
i tray to insltal new wm 6 and whail instaling error apire and naw phone dont whana start and dont whana conect whim my pc plss some1 helm me if can
i tray whit any reset dont worck eather
Plz give us more information about the problem then we can help what do you see on the screen when you try to turn on the phone? when u tryed upgrading your PDA the first time was the charge more then 50% if less it will give a error message.
Read the Upgrade Guide again and look for the Recovery Steps follow that and your problem will be Fixed it worked for me if you cant find the files you need NO_Vendor WM 5 Rom let me know al upload and post the link here for you ok
somehow i menage to turn on bootloader and then the phone was stack there i try to install wm 5 when go to 100% noting happens on the phone after hard reset
then i tray whit wm6 same there go fine on my pc till finish message appear and on the phone go till 100 % and i done hard reset and noting
then comes real problem my phone stop to charge my battery
he is now dead
on pins where should stand battery he show 0 voltage
and i come to dead end
if some1 now where to search for answers pls give me the link ty for your help in advance