i tray to insltal new wm 6 and whail instaling error apire and naw phone dont whana start and dont whana conect whim my pc plss some1 helm me if can
i tray whit any reset dont worck eather
Plz give us more information about the problem then we can help what do you see on the screen when you try to turn on the phone? when u tryed upgrading your PDA the first time was the charge more then 50% if less it will give a error message.
Read the Upgrade Guide again and look for the Recovery Steps follow that and your problem will be Fixed it worked for me if you cant find the files you need NO_Vendor WM 5 Rom let me know al upload and post the link here for you ok
somehow i menage to turn on bootloader and then the phone was stack there i try to install wm 5 when go to 100% noting happens on the phone after hard reset
then i tray whit wm6 same there go fine on my pc till finish message appear and on the phone go till 100 % and i done hard reset and noting
then comes real problem my phone stop to charge my battery
he is now dead
on pins where should stand battery he show 0 voltage
and i come to dead end
if some1 now where to search for answers pls give me the link ty for your help in advance
Related
I've done all search BUT still can not solve out my problem.
I tried to upgrade my current ROM (1.03) to 1.60 BUT when upgrade in process; suddenly it said cannot find the device(XDAII).
At that time I took out the machine from cradle and did soft reset. And put it back to cradle to continue upgrade. And the error message still said it still can not find the device.
When I tried to enter into Bootloader mode and USE ROM on SD to restore my original ROM, BUT I tried the method mentioned in some post;
still cannot go to BOOTLOADER mode. On the screen it always said " Serial on the top.
Could anyone help me please?
I have the same problem..
i even tried with Qtek Rom, MDA rom... still not working.
When I turn on the xda II, it only displaying serial on top and v.1 06 at bottom.
tried to run the xdaII upgrade rom with the error :
ERROR 100 : MODEL ID ERROR 1-N-PH-PH-PH
If I try with QTEK and MDA Rom it just does nothing, or it hangs for a long time..
I have tried many times and still not working..
please anyone..
I have the same problem, people, pls help
rom update from sd card
hello,
i did had this also on my old mda..
i fixed it with a rom update on a sd card
good luck
still waiting for a good working 2003 se for my mda2
XDAII stuck in bootloader
mine too , stuck in bootloader with written :
SERIAL V1.06
nothing else ,
what can we do pals ?
no one try to help ????
please ?????
thanks
steve
if you have something written on the screen; such as SERIAL V1.06 then in my opinion you're still okay. do a couple of hard resets, put the unit back on the cradle and double click the upgrade file again. a lot of chaps ran into this same problem but eventually got it going again.
cheers
Thanks Robson..
I did that last nite , but still facing same probs .....
by the way , how to drain my batt ? just take out from the unit for 1 hour ?
and it will automatically drainned ? pls tell me ... thanks before...
Hope this is help...
I have the same problem b4, its frustating to see my XDA become an "expensive brick". After trying everything finally worked. What i did, after u turn on your computer plug in the cradle and also put the XDA into the cradle. Usually the computer didn't recognize it as Pocket PC, so u need to insert the companion CD to ur CDROM. After the computer install the driver, go to folder where ur upgrade file at. Click on HimaUpgradeUt.exe and follow the instruction until finish. DON'T FORGET not to disconnect the power or even take out the XDA headset from the cradle until finish. Good luck guys
hi my friend my device is not respond i try to upgrade it but it is now black screen and i want to reflash it like any device
and i want to know how i can do that
please any one know
my device is
imate pocket pc phone
win se 1.72
and i want to know how i repaire it but you must know that i try to put in the crtadel but and reinstall but this is screen is appear to me
start aggain
what did you put in your rom?
first check everything
is the roms you try to update for your device?
it was power loss?
can you get it to bootloader if you can it will be back from the dead
check roms for country id errors
if you get it to bootloader and you dont get it to connect to you pc try another pc
ok thats it for now
my friend when i connected the power my device is not work how?! because when i put the battery in the device it gives me that no power in the device ,then i changed the battery but the problem still appear when i put the device in the cradel the red light becomes work but this happend when i put it without battery now when i put the battery the device turn off the red light and not give me any thing now i want to give the device power
how can i do that and how can i fix the screen that tell me that the device is not in the cradel this screen is apper for me my frindes
and when i press that buttons nothig happen i don't know waht but now i want to give the device the power how can i do that do you have any answer about that
hi my friends what can i do
hi where are you my friend what can i do
plesae why noboady replay for me
oh where are you
Did you try a hard reset? Please detail what happened exactly, from the beginning.
the first when i put the baterry in the i-mate pockt pc phone the red light is became off i don't know why if someone know the reason he can help me and i want to get the bootloader that is appear in the middel of the screen it called usb or serial because the screen is black i don't know waht i want to became on and i see the serial so can you help me my friend please
if you know how can i get the bootloader you will help me and how i turn on the screen my friend because it is became off and this is the reason
i hope you understand me because when i upgrade the device still work but when the extended rom is installed in the device i see (erasing the rom ) and after erasing the rom i have lose the power so the extended rom now is empty and the usb didn't read any thing by active syn and any other application so can you help me and i try to re-upgrade the processe is failing so i want to know ho can i turn on my device again
dear all friends
i have wiza200 k-jam it was work with love rom then i try to flash e it with shelltoll with RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship
and then phone hange in phone screen ibl and sple it can go to boot mode
but how can reflash it. it cant accepte update so please help me how can i revive it please tell me .
iam waiting help .
put the device in bootloader mode and flash the latest rom from your carrier quick!!!! before the battery drains out.
holding down the camera button then press the soft reset whole..
that should bring you to bootloader.. then flash!
Faria
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
samy.3660 said:
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
Click to expand...
Click to collapse
Yes if the battery drains and the phone has no OS it is not capable of recharging the battery as this is controlled by software not hardware, an external charger would be needed to charge the battery and then flash the phone.
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
waleed2 said:
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
Click to expand...
Click to collapse
the tool you need to current revive your device is the latest official rom from your provider.....t-mobile- orange ?
link for wizard love rom
here is a link for the wizard love rom you will be able to flash your device using it get most people out of trouble the once charged can use the shell tool again
http://rapidshare.com/users/EXGZ7T you will find it a the bottom of the page
i have the love rom but i cant flash it i see this errore
so what can i do iam waiting it was love rom isdie it it before hange with shelltool
thanks to all the wizard now back to live but i have same problem it has simlock ans isee in the screen you have tried 9times please retry
so how can i slove this probem
My Wizard
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
worker2000 said:
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
Click to expand...
Click to collapse
I got it. Its working again. But I want Windows Mobile 6. So if someone can give me a clou how to change the rom and where I can find a ROM for G4 that would be great.
THX
O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
can u turn it on or is it completely dead??
if not, try another battery
I need help from all of you
I can’t start xda that is a problem, is dead , battery it was around 75 % , I need help if know of to start aging after my mistake during upgrade I install old upgrade and it stop on 3 colors screen in I move a usb cable after that I can not start any more if you have any info which it can help I will appreciatively
Regards to all
remove the batterry for a days time and check the next day have tried the same and with success
ipl 2.10
spl 3.08
radio 2.19
os 2.20 jesterz
You should find an extra usb cable and expose the black and red wires. Plug the oposite end into the usb port on your computer, then hold the red wire on the positive end of the battery and put the black wire on the negative end of the battery. Do this for about 30 seconds then put your battery back into your phone. This will restart your battery.
real help
I don’t have problem with battery , battery is working OK , I test in other xda , I have problem with XDA , is dead during upgrade , I put wrong upgrade and it stop on 3 colours and I move I usb cable and after I can not start power on or rest . If anyone know how please reply
Regards to all
haveriii said:
O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
Click to expand...
Click to collapse
Hi
Have u tried to force bootloader mode (the tri coloured screen),it is done, by pressing down the camera and while keeping it pressed,than press the power on button with other hand. It will switch on the device in bootloader mode( into the tri color screen) from there than flash the original Rom of ur carrier,which came pre-installed on the device or any other Official Rom from the same carrier.U can download official rom from ur carriers site.
Hope this will help and revive ur device.
secondly follow this excellent thread and read and ask for help there. Goodluck
http://forum.xda-developers.com/showthread.php?t=294107
help plz urgent
hi! friends need an urgent help plz while i was updating the rom my o2 got stuck with some blank screen written with "SERIAL" on the top and "VS1.02" at the bottom plz help how to get back my phone software
Can you enter bootloader? Hold the COMM manager button and soft reset.
@fardeen20
Please do not cross post the same thing in several threads. You have been answered alread. I have deleted the repeated posts for you. strike 1
Wow! There is a moderator for this forum!
Have you tried entering bootloader when the device is plugged into the charger? I know you say the battery works, but that doesn't mean the device can use the battery. Does the device do anything when plugged in or powered on?
dead prophet
im havin the same issue... my prophet wont even wake up... no power.. batt was more than 80% before flashed.. what can i do to get the power back..?? pls reply
Bootloader
Can someone post a picture of how the bootloader screen should look like?
I know it is a stupid question, but maybe that will help me solve my problem as well.
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
may help.
i need the tool for upgrading htc pm300
hi everybody
i have imate jamin g4
i tried to upgrade it
but it wait in three clolor screen
not open not upgrade
always resetting
when put usb or charging wait 1-2 min and start to reset (off-on)
i tried temp rom and tried lazy tools hard spl
but not change always reset
maybe died
when it start to upgrade it start to download but it not end bcs reset, reset,reset
pls help me can i recover it
in three color screen
IPL 2.13.0001
SPL 2.13.0001
right up corner RUU
flash first WM5 rom and don`t cry.
i try to flash but when i put usb cable
it start to upload
after %20 or %5 or %42 it reset and off then on
Is your batty over 50 % ?
i dont know bcs i not see anything
i put to charger but it continue to restart
Charge your batty, with the orig. charger - After 1 hour, give it a try, and go to the bootloader modus, than take your USB to the PC and flash a WM5 Rom. Read here some treads, this is not a new prob.
ok be try with orginal charger
and write here to you
hi there
i search original charger but not found it
i make it from nokia charger and try to charge
jamin not restarted )))))
it now at charge after charge be try flash it
if it run i write you
thanks for you
i am ver happy thanks you NEO130 my jamin is run
but network signal is very low can i adjust it
Maybe take another radio Rom. Search for it, in the treads. I don`t know where.
tnural said:
i am ver happy thanks you NEO130 my jamin is run
but network signal is very low can i adjust it
Click to expand...
Click to collapse
Hey mate,
Whats the version of your radio rom?
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
Good help&work NEO130
dead iamte jama
can any one please help me as welll....
i was try to update my rom from dnw.exe....
i was trying to upgrade my rom to wm7
when i was upgarding bootlaod.nbo my jama hang
when i remove the battery and install it again since then it wont start
no screen not even charging light is blinking its totaly dead
can any one please help me
before upgarding i was perfectly using WM.6.5
please brother help me out from this
...Why don't try a 'basic' wm6.1 rom and try to upgrade step by step?
Try some Bikertibi rom.
bilalpai said:
can any one please help me as welll....
i was try to update my rom from dnw.exe....
i was trying to upgrade my rom to wm7
when i was upgarding bootlaod.nbo my jama hang
when i remove the battery and install it again since then it wont start
no screen not even charging light is blinking its totaly dead
can any one please help me
before upgarding i was perfectly using WM.6.5
please brother help me out from this
Click to expand...
Click to collapse
There is no WM7 for the prophet and u used a next upgrade tool not recommended really did you not know that WM7 have not came out as yet? am sorry I cant not help you u will have ether buy a next device or go back on the forum you got the files from tell them what happened and ask them for a solution but you should of stayed on windows mobile 6.5