Hi all, I'm running spb on my ameo and all is well. I've just got hold of spb online and am wanting to give it a try. HOWEVER, I install it to my device and it says installation has been successful but it is nowhere to be found. Has anyone managed to get it working? Could it be because spb is still installed? Is the correct way to uninstall by remove programs?
Thanks for any advice.
spb online works ok
you need the latest version there was a problem with v1 on athena latest version works fine on mine
Related
so does anyone know if we can tweak our touch.dll file to allow the touchflo cube to work? I tried replacing the the touch.dll with the one from the wizard kitchen file and i could see the cube but i lost all touchscreen capabilities until hard reset. If i just try running the cab file and launching the cube without changing the dll file the i get only a black screen.
it works correctly with none of the other htc stuff installed. I had it working using the instructions everyone else used ... accept when i started installing apps, it interfered with them and began not working again (black screen).
Also, it required the new rom update to work (for me).
The problem with that is that you need those apps installed to get full functionality dont you.
nxtlidenno said:
The problem with that is that you need those apps installed to get full functionality dont you.
Click to expand...
Click to collapse
For sure...it's not worth losing all the functionality right now just for the cube (IMHO). I'm sure we'll have it soon enough though, these guys are crafty!
OK So the dumped rom is up, Now what do we do to cook up a rom with touchflo cube?
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
be more specific. How it cant run? Install properly? wat else SIP and Today Plugin did u install?
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
possum4 said:
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
Click to expand...
Click to collapse
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
I have English Rom version O2 Xda Atom Pure! Calligrapher worked before on 0.3.0 and original roms. Just this rom won't work on!
try to install G4 SIP Tweak.cab make pcm keyboad as default SIP, it works for me....
download from here... http://forum.xda-developers.com/showpost.php?p=1424544&postcount=1
ogami_ito said:
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
Click to expand...
Click to collapse
Hi and thanks for your help and suggestions. I tried the software you suggested but it didn't work (with calligrapher). Thanks again anyway
possum4 said:
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
Click to expand...
Click to collapse
May I know what the version of this Calligrapher is? and where is the official site?
www.phatware.com I'm using current version 8.5
thanks!
possum4 said:
www.phatware.com I'm using current version 8.5
thanks!
Click to expand...
Click to collapse
if this program works..can u share to me this program and PM to me the Se**al..thanks
Jiggs I know you are busy however I'd just see if there could be any work arounds so I can run Calligrapher. I have tried the suggested "sip change" programs mentioned and also tried sk tools etc. Only if you have time of course! I'd be very grateful. Thanks again for your wonderful work
I have just tested the latest version of caligrapher on my new build. It works perfectly
Caligrapher is cool, but the application is large
I agree with Jiggs. Nice software though.
Could I help test the new build? Or is that too much to ask?
Calligrapher v8.5 works fine for me w/6M pagepool.
Calligrapher uses a LOT of memory. It seems to fail to run when you have too many today plugins (or a few using lots of memory). Here are the things to try:
1. Go to options and set Calligrapher to be the default SIP on reset.
2. Reset the device.
If it still doesn't work:
3. Disable ALL of your today plugins.
4. Reset the device.
If it works now, decide which today plugins you can't live without and turn them on one by one until Calligrapher stops working.
If it did not work, try SIPChange - http://forum.xda-developers.com/showthread.php?t=271008.
Good luck!
Hi All. I got myself into a bit of a jam with netCF3.5.
I've done a search here, but according to the wisdom already here, the install should be straightforward
Here's the problem:
I was experiencing a few probs with a few apps that needed it. They had been working fine, but all of a suddenly they started complaining that they couldn't find netCF3.5.
So, I downlaoded the cab and tried to reinstall. But, just as the instal was starting, my HD2 said: 'the required program is installed in ROM' (or something like that!)...and then the instal aborted.
The apps still won't run. I tried UN-installing CF3.5 from the device using 'uninstall apps' and managed to remove it. But when I then tried to re-install the cab again - I got the same message about it's already installed in ROM. Good job I had a full backup of everything! At least I'm back to where I was before I uninstalled it.
So, what have I done since:
1. Tried and retried a few times to reinstal, but it's made no difference
2. Checked the registry to see if it's pointing to the latest version of net cf3.5. It is
3. Pulled my hair out - that didn't take long )
I guess I'm looking for a way to 'force' install netCF3.5 and stop the message about it already being installed in ROM.
Any help greatly appreciated.
(I'm normally pretty good with these sorts of problems, but this one has left me clueless)
Cheers
Im using the energy rom and i was wondering how come the marketplace doesn't work. Everytime i go to download bing or anyother map it stops at 75%. Any help would be appreciated.
download Omarket install it and download WMmarket and install it.
problem solved .. had the same prob withs erval roms
The only problem I have with WM Marketplace is that it won't work over WiFi...only on 3G. Maybe I'll try re-installing it.
I have Vegan-tab gingerbread 7.0RC1 pershoot bl1.2.
Flash no longer shows up on my installed apps. When i search for it, It says it is not compatible for my device, google maps does the same thing too. Does anyone else have this problem too. I just noticed it last week.
miggyg said:
I have Vegan-tab gingerbread 7.0RC1 pershoot bl1.2.
Flash no longer shows up on my installed apps. When i search for it, It says it is not compatible for my device, google maps does the same thing too. Does anyone else have this problem too. I just noticed it last week.
Click to expand...
Click to collapse
Yeah, that was the only problem I had with that ROM. It seemed to always happen for me when the tablet would hard freeze and I had to reboot. Once it boots back up, anytime I access the Market, everything was not compatible with GTab.
I never found a solution other than returning to HC. It was a good ROM and that was the only prob I had with it.
Does [BL1.2]VEGAn-TAB GingerEdition v7.1.0 solve this issue?
Yes, it is much better running Vending 3.1.3.
If you have superuser rights, use AntTek App Manager to backup flash, than delete it from system (even sys application version), the Hulufied version from ASOP Ginger posts. You might need to install, update from market, remove, and install Hulufied version to stick.
Just download it on the PC..then hook up your GTab to the PC...drag the Flash 10.3 (Yes that one will work) into the storage on the device. Then download it from there.
All the apps (And there was ALOT) that shows up Non Compatible with your device in the Market...will actually work if you do it that way.
Thank you for all the responses. I went for the upgrade option to Vegantab 7.1. I am very pleased.