hi guys,
having trouble with my xda's display.....it is strange, lines on display r missing ,,not random or few,,,it looks ods r present evens r missing [1-3-5-7-9] r present and [2-4-6-8] r missing...
in diagonistic mod ,when display test is performed,,it shows all lines[red- green -blue] but when displays chracters ,numbers and alphabats,these r broken...some times it shows a shadow colour ,blue or yellow ,just like poor ofset printing.
is it display or a hardware malefunction????
plz some1 help.
You may want to check/clean the flatcable connectors to the display on the motherboard.
i have cheked flat cable and connector,it seems ok ,pressing lcd pannel from side ways,now result in bleeding blue[not red ] spot in the right corner....
but i have manage to restore it ,by pressing and rubbing on the back side and now spot is disapperd.but vertical lines problem is remained.
My Mobile Screen is blank and is not turning on. It happened by it self, I was not upgrading nor charging. Only thinking I can tell is that when ever I'm charging it is showing RED light instead of Yellow. If I remove the battery and put it on cardle to charge, cardle will show that the battery is Full by GREEN Light.
I hope it can be fixed. Would appreciate if some one can help me ASAP.
Thankx in advance
try softreset
try hardreset
try leaving the batt out for a long time
I tried all that but still same. Neither Soft nor Hard reset or taking the battery out. Nothing on the screen, its blank.
Unfortunely i having the same problem, i suspect the backup battery problem ....
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
jspasatc said:
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
Click to expand...
Click to collapse
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?[/quote]
I sent my hima to a service repair center to check the soldering on the mainboard. It's not an authorized repair center, as there's none in Macedonia, it's a place for repairing digital cameras and stuff. It's the place where they changed my bottom connector few months ago, so I thought that the problem might be in the connector soldering (something loossened or something) but , I was told yesterday that the hardware seems ok and there's no problem whatsoever with the connectors and the m/b. This is how it all started:
My problem started a week after I upgraded to tofclock's 2k5 2.01wwe, and after altering the shell.exe file and the registry in order to get the clock shown in the title bar instead of the battery indicator. So after couple of days enjoying the 2k5, one morning my phone turned off, and I couldn't power it. I tried soft reset, tried hard reset, nothing. So I thought I should reflash it, but I couldn't enter b/l mode. I try leaving the battery out for some time (couple of hours) and when I place it back, the screen turns on, just a plain white light for about 15 seconds, and then turns off again. If I try hard reset, the screen lights up again (white screen, no image or anything) and after 15 seconds turns off and so on. I noticed that when the screen lights up after hard reset, if I place the hima in the cradle, the white screen stays on for 3 minutes, and this was exactly my settings in the power management(15seconds on battery, 3 mins on craddle), and the led light in the upper right corner is yellow, and after some time, it turns to green, as in battery charged. Active sync doesn't recognize the phone, I can't get serial screen, and nothing other than what I described in this post. I've tried hundreds of times the entire procedure, but nothing still.
Any ideas. Thanks,
J.
Latest news:
After many attempts to enter b/l, I wasn't successful. Now I placed the device in the cradle, the screen turned white as usual, the amber light turned on, and I received a message in the system tray in my pc the a new hardware was detected, and that XP is instaling..... After that, I received a message that the new device is Windows based Mobile Device.
And then, xp created a new LAN, but , it shows a limited or no connectivity.
why is this happening? And what is happening?
the pda show up as shuch if it's ready to receive a rom from the rom upgrade
But still, when I start himaupgradeut_noid.exe I get error 101, connection error
Note that I only get ehite blank screen, and not serial v1.06/usb v1.06, like I had before my last upgrade to 2k5. perhaps the b/l is corrupted or something?
cheers,
J.
hi guys,
Is this the backup battery we need:
http://www.ipaqrepair.co.uk/view_product.php?product=375
Please advise,
10x,
Jordan.
I haven't been able to boot up. I tried removing and reinstalling the battery.
I only see the LG with a face logo on the screen, and then it flips to a picture with a battery, and a red arrow is wrapped around the bottom of the battery.
When I unplug with phone, the phone returns back to a black screen.
Help??
could you show us pic?
if it is not charging ICON
I've changed screen on my Flyer. Repair parts were from working tablet with dead battery controller. So I simply replace donor's mainboard with mine. Now I've got this kind of problem: middle part of screen (where upper row of letters is situated in portrait mode) handles my touch like multitouch of near area. For example, I press Backspace, and screen shows touch of Backspace and 0. Other parts of screen works fine. I've made calibration reset, hard reset but nothing gone. Please help me to find solution. Any help would be appreciated
Hello,
Unfortunatel my device seems to have some kind of malfunction.
The Issue is that the devices suddenly locks andd just shows the clock.
I can`t unlock it. After a while it might show the normal screen and I can unlock it.
Then the clock comes back and I can`t do anything.
I reinstalled with wipe all everthing however after a while it will come back.
https://www.pic-upload.de/view-33958545/DSC03631.jpg.html
Any help is appreciated
Check for smart cover option in smart assistance
Turn it off. The pic you posted comes when you use flip cover (when closed )
Have u applied any sceen protector covering upper right (nr front cam) side of screen it may cause this
There a proximity sensor and one other idnt know name but it should be uncovered when using phone.
Or the sensor is misbehaving.
vespin said:
Hello,
Unfortunatel my device seems to have some kind of malfunction.
The Issue is that the devices suddenly locks andd just shows the clock.
I can`t unlock it. After a while it might show the normal screen and I can unlock it.
Then the clock comes back and I can`t do anything.
I reinstalled with wipe all everthing however after a while it will come back.
https://www.pic-upload.de/view-33958545/DSC03631.jpg.html
Any help is appreciated
Click to expand...
Click to collapse
That may be smart cover problem