I flashed my titan to dcd 3.3.4 yesterday and then restored my files with spb backup. I tried running quickgps and get the error that's its an invalid app or unsigned and to reinstall it. I skiped that and reset rom to clean install, fresh with nothing installed.
I then installed quickgps and got the same error message when tried to run it. any ideas on how to get quickgps working? I like this version of dcd with the extra 3 megs of ram and programs seem to load faster, but I like quickgps too
Where are you getting this HTC Quick GPS ROM?
HTC QuickGPS is a program that downloads GPS Data from the internet so it is easier for the GPS Chip to get a lock.
I would try installing the missing VerInfou.dll that I posted here:
http://forum.xda-developers.com/showthread.php?p=2908278#post2908278
and see if that helps.
Thank you ! I put that DLL into the windows directory and QuickGPS now works again! yay!
Related
Hi,
i have a 32mb xda and after upgrading to wm2003 i lose the checkboxes in dialogs, if i soft reset then they come back for a while and tapping on the text next to the box enables/disables the option but i get no boxes!
most strange, also i had to turn off the ir recieve but when turned off i still got the error for com 1 with navigator, i had to uncheck it then soft reset to apply that change.
i cooked the rom from jeffs kitchen a while ago and was going to redo it but it is unavailable and Yorchs only has the 4.0.05 rom.
Any ideas on the missing dialog checkboxes.
Regards
Smallboy.
Hi ! I had the same problem (even with no other app installed ! Just wm2003 and nothing else) , and I never solved it ... till the 4.01.00 went out. I tried this one and had no problem. All attempts I made with earlier versions were unsuccessfull ! Unfortunately, no rom kitchen use this version yet ! So I have a 'blank' rom version from T-Mobile found somewhere on a post on xda-developers.
Hope this help !
cheers for the reply,
as i unbderstand it the 4.1 rom only support gsm 900/1900 which is no good for me as a uk/orange customer.
regards
I have the same problem.
Im using an xda 2 on o2 with the following software
tom-tom navigator 2
gps 2.08
towa's patch
resco explorer
pocketinformant
spb pocketplus
claunch
clearnotify
Anyone else see a pattern?
Surur
Ditto for me. They're still "there", if you click your stylus over where they should be, you'll get them to work.
A reset clears the problem.
Looks like there's a leak that is using up the GDI heap. You can get the same type of error on desktop Windows.
the error is caused by navigator, i installed v2.24 on mine and also when i installed it on my mates xdaII he now has the same problem with checkboxes and radio buttons missing, they come back after a soft reset but go after running navigator..
Smallboy
smallboy. You can use 4.01.00 on Orange as long as you only update the CE Rom and not the radio stack. Just make sure you don't go onto the Band select page on the phone settings.
Hi Swifty,
Can you give me a dl site for 4.1.00 rom.
cheers m8
ftp://tmobile:[email protected]
You need to just extract the CE rom using something like winzip, then use XDA Tools to put it onto an SD card and flash to your phone.
HTH
Neil
cheers Swifty, i have this now, all i need is a way of making the nb1 file into an .exe
UPDATE
I have now reflashed to 4.01.00 (t-mobile) and then installed navigator and voice but not gps, upgraded nav to 2.24 then installed gps 2.09
No missing checkboxes now but stil get the initial strtup problem of no map, which is cured by going to navigator mode.
I just flashed the wm6 ROM from Eforich, but after i input the internet settings, they do not save and everytime i want to use IE, i have to reinput the settings. I also d not have MMS and do not know how to get that back. Can anyone help?
my WM6 (not 6.1) build is very buggy, so i can only to advice you to flash WM6.1
I did the 6.1 flash. I think I will have to go to the latest WM5 for now. Thanks
I had to go back to WM5 (which I hate). I was loving the WM6. At any rate now I am having trouble syncing. I had to update my activesync when I did the wm6.1 flash and now with WM5 i cannot sync with PC. am I doing something wrong? and also, still looking for a way to keep WM6.1 with my internet settings and MMS settings.
I'm running the 6.1 ROM from Eforich with the cumulative patch, and my internet data settings have no problem saving. I set them once and can connect automatically when IE starts up. I'm on AT&T. Which provider are you using.
I am also using AT&T. What is the cumulative patch?
I am using the dialer included in DCD 3.2.6, but cannot access the ## codes in the dialer. Is there a dialer that works best with USCC?
If you install the DCD USCC Carrier cab, the # codes should work. I use them all the time.
i.e. ##778 opens PRL, etc.
BTC
Thanks for your reply.
I have installed the carrier cab, but I figured I would redownload/reinstall to ensure.. it wanted to uninstall the previous install of the same version number, to which I said yes. It couldn't uninstall it, but offered to install anyways. Which took. But still not taking the ##778 type codes. I there a way I can take the HTC Titan Phonecanvas (dialer) out of the kitchen into a cab file for a reinstall of that? If this would be relevant.
Have you installed a different dialer since flashing the phone? It's possible the new dialer you installed may have overwritten the file needed for the ## codes.
Even if you uninstalled that dialer, it may not have restored the file.
You can try backing up your phone, doing a hard reset and reload the carrier cab and see if they work then.
Mine have always worked when running a DCD rom, no matter which dialer I flashed with.
BTC
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Not sure, I know there are certain versions of SPB designed to do that, but I'm not sure. The main issue is it might restore registry entries that don't need to be and could cause some issues. Can't hurt to try, however worse case you would have to reinstall app yours apps by hand if it doesn't work.
I'm sure there is a cab for the titan dialer, however the Vogue dialer has always worked for me with the codes as well.
BTC
MetalHd said:
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Click to expand...
Click to collapse
SPB Backup has a "ROM Upgrade" mode that is supposed to be for when you change your ROM but want to keep all your programs and whatnot without having to reinstall them all. I've used it once and didn't notice any problems but I didn't keep using my phone that way for very long (only a few days at the most, I don't remember completely to be honest). Most people on here recommend against doing that. I've never had a problem with the ## codes on whatever dialer the default for DCD's ROMs is unless I was trying to do Sprint specific codes and I assumed they didn't work because I'm on Telus.
My new HTC S740, just hard resetted, can't run as many apps I used to use on my old Moto Q, like dotfred's task manager, or wm5torage (I know that the function is builtin, but for the record, that program doesn't run). These programs crash just when you run them.
Also, PIM Backup crashes the same way when trying to restore messages. Luckily, it estracts the contacts backup before crashing so I can restore contacts alone.
I suspect it has to do with app unlock. I can't edit the necessary registry keys with regedit stg or mobileregistryeditor because they error out ("access denied").
What can I try? SDA_ApplicationUnlock might work?
My phone is TIM-branded (italy) and has a 20282 build rom (1.15.901.0, R 0.29.30.22, P 12.29.30.09H)
EDIT: already tried this S740-specific unlocking howto but it doesn't work, cause Regedit still says access denied.
I attached the application unlock CAB in this thread:
http://forum.xda-developers.com/showpost.php?p=2211556&postcount=7
I used it on S740 and it works
[email protected] said:
I attached the application unlock CAB in this thread:
http://forum.xda-developers.com/showpost.php?p=2211556&postcount=7
I used it on S740 and it works
Click to expand...
Click to collapse
Many Thanks!! It worked!
hi all,
i'm trying to create a rom for the HTC HD2 without manila using osKitchen Zero but i'm getting error for some applications like "file cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If problem persists, try reinstalling or restoring this file. Care to help?
- Digital compass has this error when launched.
thanks in advance.
your compass doestn match the rest of the software versions
my friend had the same error on his topaz ROM. He just replaced it with a correct version
i'll try that, thanks for the tip.