I just upgraded to DCD 3.3.4 from DCD 3.2.6. I was able to see Arabic file names and emails, how I can't. Was there something in the DVD 3.2.6 kitchen that I was supposed to install ontop of the DCD 3.3.4 rom that came without a kitchen?
Thanks!
Related
Hi Guys,
i downloaded the himalaya update for win mobile 2003. Now I have a problem. The phone which was 1.72.01GER, extROM 1.72.184, radio - 1.17.00 now has become 2.02.t1WWE, radio 1.18 (NO EXTROM version),but the extended ROM is still in german and will not let the new version install. I have to rest the PDA to use it. But most of it seems to work well. I have tried to install the 1.72.181 WWE version, but I get langage id errors (I tried GER, WWE).
There was a note with the installation that said do not let TDxxxx.exe run, in config.txt. I have no idea were to find the file.
please help.
Could it possible to erase all of the rom and install a new version altogether? or erase the ext rom alone? If yes then HOW????
I am not using O2's services in India.
Thanks a million.
Hope what i have written makes some sense.
tykumar said:
Hi Guys,
i downloaded the himalaya update for win mobile 2003. Now I have a problem. The phone which was 1.72.01GER, extROM 1.72.184, radio - 1.17.00 now has become 2.02.t1WWE, radio 1.18 (NO EXTROM version),but the extended ROM is still in german and will not let the new version install. I have to rest the PDA to use it. But most of it seems to work well. I have tried to install the 1.72.181 WWE version, but I get langage id errors (I tried GER, WWE).
There was a note with the installation that said do not let TDxxxx.exe run, in config.txt. I have no idea were to find the file.
please help.
Could it possible to erase all of the rom and install a new version altogether? or erase the ext rom alone? If yes then HOW????
I am not using O2's services in India.
Thanks a million.
Hope what i have written makes some sense.
Click to expand...
Click to collapse
Search around for ExtROM posted by ZeroExtreme, DCS or SIN. It's probably zipped up or in .EXE file. But the final file you are looking for is ms_.nbf.
Put it together with your ROM nk.nbf file and re-run the upgrade again.
You can skip the RADIO .nbf file to save some time.
thanks Henry. Will try your solution and let you know.
I have upgraded my OS from 1.23 to 2.06 (cingular OS only, no extROM).
Voice Command 1.5 installs properly but gives an error when launched
Voice Command 1.6 refuses to install at all
Both versions of VoiceCommand are French not US (though you would need to know that )
I have tried to do that just after a hard reset not to be polluted by my other apps, but I have the same result
I have tried with and without the "allow non-certified applications" flag from HTC tweak 2.0. Same result...
I got 1.5 to work on this os after a sprite restore with sbu from OS1.23, but the PIM database was corrupted. So I had to restore without it and get it back from ActivSynch. I do not think there should be a relationship between the 2 however...
1.5 was working after the twicks to remove Speed Dial as indicated on the Wiki (but with corruped PIM database)
But since I have a clean PIM database, no way to get Voice Command to work despite desinstall, clean any trace of it in the registeries and reinstall...
Any hints from the experts on the group?
That would be much appreciated as I am running out of ideas to try!
Odd,
It worked for me. Of course, knowing me I probably copied the CAB down to the device over USB and ran it there.
Of course, I'm using the english version since all the people I know have english names (joke).
Rob
I did try to install it thru a cab execution on the device as I do usualy (I like to keep all the cabs for easy reinstall if necessary)
Any hint why I get an exec error on 1.5? I would stick to it if it worked as I found some ways to get it to work with BT
Try setting all parameters in the regional settings to US. then reinstall. revert afterwards to French settings.
I have come across an other Microsoft product which needed US settings.
Simple.
Cingular OS2.06 is AKU3 = No VC1.5
MS Voice Command v1.5 will NOT work on AKU 3.x ROMs; VC v1.6 should work (does for me with Cingular 8500 w/OS 2.06)
Good Luck!
Cingular 8500
OS 2.06
Radio 1.27
drbowden said:
MS Voice Command v1.5 will NOT work on AKU 3.x ROMs; VC v1.6 should work (does for me with Cingular 8500 w/OS 2.06)
Good Luck!
Cingular 8500
OS 2.06
Radio 1.27
Click to expand...
Click to collapse
I second that! 1.5 would not work at all. Only 1.6 did on the latest Cingular AKU 3.3 ROM.
G'Day,
After reading and re-reading the wiki and lots of threads, I took the plunge and flashed my JasJam.
I now have Black 2.0, Radio 1.38.30.10, SPL 1.11.Olipro. Once all that was done, installed all the CABs from JASJAM_1.31.305.103_ExtROM_Telstra.
While I don't think I actually flashed the ExtROM (I suspect I would've noticed) I just unzipped the JASJAM_1.31.305.103_ExtROM_Telstra, copied everything to my SD and ran Autorun.
Now that I'm all done, I just recieved an email from our support guys saying that there is a new iMate Telstra ROM available. I'm d/ling the exe file and given the size, I suspect it's going to be an OS and maybe the ExtROM.
Is there any way I can deconstruct the file and just get the CABs that I want (i.e. Foxtel by Mobile, Telstra MyPlace...)?
Thanks,
Baggy
BaggyG said:
G'Day,
After reading and re-reading the wiki and lots of threads, I took the plunge and flashed my JasJam.
I now have Black 2.0, Radio 1.38.30.10, SPL 1.11.Olipro. Once all that was done, installed all the CABs from JASJAM_1.31.305.103_ExtROM_Telstra.
While I don't think I actually flashed the ExtROM (I suspect I would've noticed) I just unzipped the JASJAM_1.31.305.103_ExtROM_Telstra, copied everything to my SD and ran Autorun.
Now that I'm all done, I just recieved an email from our support guys saying that there is a new iMate Telstra ROM available. I'm d/ling the exe file and given the size, I suspect it's going to be an OS and maybe the ExtROM.
Is there any way I can deconstruct the file and just get the CABs that I want (i.e. Foxtel by Mobile, Telstra MyPlace...)?
Thanks,
Baggy
Click to expand...
Click to collapse
The new ExtROM is on the Wiki... there is not much change to the new ROM... just some bluetooth patches that you must not install if you are running Black 2.0
walshieau said:
The new ExtROM is on the Wiki... there is not much change to the new ROM... just some bluetooth patches that you must not install if you are running Black 2.0
Click to expand...
Click to collapse
As far as I could see, the vew ROM version was Telstra specific as it had the Foxtel and Bigpond MyPlace. I assumed that these would be in the ExtROM. Is that correct?
Cheers,
Baggy
Instead of posting this on the near 100 page dcd rom thread, I wanted to start a new one. I don't wanna be "drowned" out. Sorry
I recently used the dcd 3.2.5 kitchen for the first time (after HOURS of work putting my OEMs in and a FEW reflashes because i flubbed something up), but I noticed a problem. Maybe it's just me, maybe I screwed something up, but I can see and have read that .net framework 3.5 is included in the kitchen (I can see it in the sys folder). Thing is, it is NOT in my ROM after cooking. NONE of the dll files are in the windows folder and applications that require puke out. I installed the .net 3.5 cab and all apps work again. I tried adding the 3.5 OEM into the kitchen, but BuildOS *****es about duplicate files.
Did I miss something?
As a side note, does anyone know if changing this ugly ass VZW case/enclosure for the phone is possible?
Hello everyone, ill start off by saying im a little new, however im able to follow directions well. I flashed my ppc 6800 to cricket today with a ppckitchen rom. When i put the carrier cab files over to the device and install, for whatever reason it keeps saying cant install to that location select another. both my phone and mem card have ample storage. I downloaded the carrier cab from this website, so im sure the file is ok. can anyone help please. thanks.
***UPDATE***
I tried installing other carriers like alltell just to test them out, and all of them install except the cricket cab file...there must be some weird issue.
Perhaps ask at ppckitchen or ppcgeeks about this... I think most people here are using DCD roms etc. Some roms don't need a carrier cab either.
did you pick a carrier in the kitchen that you cooked? If so then you don't need the carrier cab here as that is only for DCD ROMs and Kitchens.