Related
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to threads like TalynOne's The Titan Internal GPS FAQ (01/30/2008) located here...http://forum.xda-developers.com/showthread.php?t=363431
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
xweaponx said:
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to other GPS threads...
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
Click to expand...
Click to collapse
I flashed this ROM and I have since, jumped to DCDs version of it, and then back to 2.17.
I have, and apparently, a lot of folks have had inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
The odd thing is that I have loaded new ROMS (including the current Sprint OEM ROM) and I'm still having that problem. (I'm taking suggestions to resolve this)
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
On a kinda more positive note...
GPS worked well (when the EVDO connection did)
New Apps sucked up more of our previous RAM, but I didn't have any
latency or freeze ups.
I myself am experiencing a number of problems with the new ROM version, and will be downgrading to 2.17 soon. It took 3 installations of the new ROM to get the GPS to work. Since then, I've experienced several performance issues, including multiple times where the phone will freeze during web browsing in Opera Mobile. Sometimes, the phone won't even freeze, but will come up with a screen saying that the system memory is low, even when I'm only running Opera Mobile, it'll ask me to close either "Opera Mobile" "Phone" "Phone" or "Phone". Weird? I think so...
Also, there are times where I won't even get the internet to work. I'll have to either go in to the connections menu and disable the data connection, or do a soft reset of the phone completely.
In my opinion, it's probably more trouble than I really need to go through. I will be downgrading to 2.17 until the official release comes out.
Same issues for me:
inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
Spent 30 min with VZW level 2 support today. I called due to ##debug HDR an/aaa was = 0.. I was under the impression was supposed to be set to 1. They did look at my SSDR (I think he said that) and found it had a small issue with the authentication (still reads =0), but after he fixed that I still have issues. My HDR RDX power goes from -71db to -96db.
I also noticed every time I call the phone changes from EV to 1x. I know you don't use EV to make voice calls, but I did not remember (key word) seeing it switch like that before. Maybe someone with 2.17 1.40 radio can confirm.
I have thought about moving back too, but my call ticket history is getting pretty long with VZW and if I needed another A-key (yes I have one written down) it may start to look strange.
I'm on sprint and when I tried to update I was stuck on boot loader so I went online and switched esn over to my Treo for the time being as I worked on my Mogul. Eventually I got to load the rom fully and switched esn back. I noticed afterwards that my internet was only locking at 1x. Upon restart it would say EV but anytime it is connected to the net it is 1x. DSLreports clocked it at 50-90kbps so I know as definitely getting 1x speed. Reloaded the rom several times and still the same. This went on for 2 days. Eventually called Sprint and told them of my problem. They noticed that I was still on the regular Vision plan but I have always been able to connect to EVDO speeds so I never thought that was an issue. They updated me to Power Vision and right after I started getting EVDO speeds. I'm not sure if it was because of the change or maybe a restart of my data service that did the trick.
2 other issues I'm having is I noticed my phone is a little slow with this ROM. Opening programs etc. Sometimes the program using GPS like Live Search or GPS Viewer will lock up temporarily. The 2nd issue is what some are also reporting regarding signal. I noticed I get 1 to 2 less signal bars.
Overall 3.16 has been "ok". No problems with flashing really, and memory usage is "ok", I'm averaging around 17-18mb free with no apps running. It's not exactly the 20-22mb I had free with my prior custom rom, but enough to get by.
I'm not having problems with phone freezes or out of memory errors. I am, however, having some problems with BT and with net connectivity.
Data: I'm using Schap's Advanced config tool, version 1.1, and I've selected the option to keep my 'net connection live all the time. Unfortunately, this is not working, and I'm finding that throughout the day my connection goes down. With my prior custom rom, if I was streaming audio content over evdo or 1x, the connection would stay alive as long as the audio program was running, barring a loss of cell signal. Now I'm finding that about once an hour my data connection goes down and interrupts my audio stream.
BT: I have a Plantronics 320 headset, which worked flawlessly (albeit with less than stellar audio quality) with my prior rom. With 3.16, the volume and sound quality are much improved, BUT I am not able to answer calls on my headset. If I initiate a call with BT on, no problems, I can talk till the call is over, then press the headset hard button to hang up. If I *receive* a call, however, when I press the headset hard button to answer, the call is answered, but the audio is not directed to the headset. Instead, it routes to the handset.
GPS works well with TeleNav, GoogleMaps, Live, and generally locks onto 5-7 satellites within about 60 seconds if I'm somewhere with a clear view of the sky.
I tried using GPS2Blue to redirect the GPS data to a BT comm port. When I have BT enabled and attempt to redirect, GPS2Blue says BT port not open, waiting for BT port to open. If I go into comm manager and turn BT off, then GPS2Blue says BT port is open, and begins to wait for a BT connection to my laptop. If I go back into comm manager, the BT icon has been grayed out as if BT is off, but the little circled "X" icon is not superimposed over the BT icon as it would be when BT is off. If I click the icon again, it acts as if BT is being enabled, but the icon doesn't change, and the BT LED does not begin to blink. Don't know if it's a problem with GPS2Blue software or something else. Wish it would work cleanly, I'd love to use my 6800 as a BT GPS receiver for my laptop.
ETA: I've seen a few folks mention that when they answer a voice call their 6800 switches from Evdo to 1X. I'm wondering if this might be a way of implementing simultaneous voice & data. Has anyone tried taking a call and browsing the web simultaneously? I think this may be dependant upon network services in your area, so this may only work for folks in big cities with the most advanced network features, if it works at all...
ETA2: Just tried the above, and I'm getting the usual message that data connections cannot be initiated while on a voice call. I'm in a large city that *should* have all the latest network features, so if it dual voice/data was possible with this radio then it should work here. I'm assuming it's not presently possible, based on my experiment, but I'd be happy to be proven wrong.
with the sprint rom a ton of us have no audio out using an adaptor to listen through headphones
http://forum.xda-developers.com/showthread.php?t=363087
is a big thread about this going on the main board.
Took the plunge and installed the "stock" 3.16 on both my phone and a friend's last night. The first thing I want to note is that it went extremely smooth. No issues to note. It took a bit too long for my liking but it was fine. I didn't have to modify any MSID or MSN data - my phone worked fine right off the bat. Data was hosed, but a quick client-initiated IOTA Programming fixed that. (Settings, Personal, Phone, Services, Internet, Get Settings)
I have two constantly pinging(one 15 mins, one 30) e-mail accounts(one imap, one Exchange) that must keep my data connection alive. I haven't noticed a single decline in my data rate, nor a problem with disconnections. Then again, I live in NYC, which may make a difference.
GPS sucked last night - I couldn't get a satellite to save my life. On the way to work today, though, it was perfect. 4 satellites found in GMaps and tracking worked great.
I'm pretty happy w/the new additions to PocketOutlook too. Has anyone noticed that Gmail's IMAP works perfectly now, and that when you have multiple accounts - hitting messaging (when it's previously closed) brings up a choice of which account to go to? SWEET!
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
So the phone made me out to be a liar. The LiveSearch download from wls.live.com failed now. It definitely worked last night on my roommate's phone however. Hrm. I downloaded it from my pc and emailed it to myself and it actually downloaded. That's odd.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
I didn't try with the ROM update, but I did experience this with Live Search.
New Rom
Vinny75 said:
I didn't try with the ROM update, but I did experience this with Live Search.
Click to expand...
Click to collapse
Had trouble getting my phone to flash, because I flashed the radio before the rom. Once I got phone going is working perfect. Hooked up to pda net on laptop downloading at 1.7 uploading at 500K. Use Holux to get gps started all programs work, Tom Tom is more accurate with my mogul compared to the external gps. Have not tried my s9 headphones yet. Running the DCD beta and I have no complaints except for the memory. Phone quality is the same.
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
I was running Custels V1.1 2.14 and radio 1.47.00. I had my data set to connect all the time (which never idled btw...)and had Ev service everywhere. After installing Dcd's 3.16 & radio 3.27 I first recieved the "twin towers"... One had data connection and the other looked like the searching-for-signal tower. Plus my roam indicator was constanlty blinking.
After searching the forums, a helpful soul recommended *228 then press 3 which programs your phone. Remember that you are not upgrading to a new phone.
I then *228 and pressed 2 this time to program the latest PRL (which was 30029 before and still then). After searching some more, I saw that there was indeed a newer PRL which is 40029 (link in the first thread). I downloaded the PRL to my Sd card, dialed **775, entered my Alltel Unlock Code of 000000 and and the first screen I saw was update prl. Click on "Menu" in bottom right and hit the "Edit" button. Now you should see a empty value with "Browse" below it. Browse to the location where you placed your prl, upload and if you exit out correctly, you should be soft resetting your device.
After completeing the steps above, my roaming triangle was gone as well as the extra tower. I still have my data constantly on with Ev coverage all the time but my data actually idles now. Call quality has been noticed by myself and others as clearer and louder than before.
That Reg Entry doesnt exist on mine.
TalynOne said:
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
Click to expand...
Click to collapse
Mine has the following instead:
"HKCU\ControlPanel\PhoneExtendFunction\CDMA\VoicemailIcon
Value name:BtnDN_LAND Value data:Windows\_VoicemailBtn1_Land.bmp" and three other similars.
Should that entry be added in it's entirety or should I remove my current entries? Any body else find they have entries like mine?
I thought I had that problem at first, but when I looked more closely, the reg entry is *in* the CDMA folder, not in a sub-folder below CDMA.
!!Major Bluetooth Issue!!
recently installed DCD's new GPS enabled ROM for Verizon. Everything has been working well even the GPS !!EXCEPT!! Bluetooth OBEX. When I try to send / beam any type of file my XV6800 stops responding and I am forced to soft reset.
I don't know if this only affects the Verizon ROM or all carriers for that matter. Is there any one here that has a fix or know's of a fix to resolve this issue? Has DCD released any news on this? I would Gladly appreciate it, as all the people with this issue.
Searching For Service
I loaded the Sprint Test Rom. No when ever I boot my phone it takes ~4 minutes for the phone to lock onto the network.
You are may differ with this situation....
PRL's didn't change. Even reloaded 60610. EVDO roaming is gone. Guess they didn't like people forcing their phone to roaming in areas where Alltel has EVDO and Sprint doesn't. 60611 also removed EVDO roaming in my area. 60610 and 2.17 work fine with EVDO roaming.
CardExport & the My Documents-redirect-to-SD-card reg tweak:
HKLM\System\StorageManager\Profiles\SDMemory
change the value of the string "Folder" to "My documents"
no longer work.
VZNav Rom 2.0 for Verizon XV6850 - llllBoredllll GPS Edition
Update 23 Dec 08 See Post #2
Preface:
This ROM is based on the eRice kitchen like my last couple ROM's. It has a modified version of the llllBoredllll GPS Fix. I modified it to create a link to PPST.exe in Programs -> Navigation -> Installation. In that folder you will also find three other installers for the latest version of Google Maps (with the new feature set)and Live Search. All tested and working with GPS locks usually under 60 seconds.
Details:
OS / Kitchen:
eRice TP Kitchen v1.03.7 [SYS OS 5.2.20931 Build 20931.1.5.0] with my Verizon OEM Pack
- Removed -
JetCet Printing
Older Opera 9.5 from Stock VZW ROM
NETCF 2.0
+ Added +
*NETCF 3.5 - Faster than 2.0 and now the standard from the eRice Kitchen
*Apps
Opera 9.5 build 2649 (Has zoom slider!)
iContact Burt Edition 6.4.5 (finger friendly contact chooser, iphone-ish)
HTC YouTube From kitchen
Latest Google Maps and Live Search. They are fully upgradeable to new version with out any issue!
*Utilties
TF3D Config - Modify TF3D settings and themes
Diamond Tweak - Modify many system settings
Advanced Config 3.3 - Modify even more system settings
nueFonts - Change fonts and sizes. Trebuchet and Calibiri look great!
SPB Back up - Great back up app. 5 free uses.
A black themed psShutXP - Utility to soft reset
HTC Network Plug in from Kitchen
*Sensor
Gyrator - Utility to rotate screen automatically in any app
Diamond Hologram - Cool 3D sensor app that simulates a hologram
Seismo - Nifty program to simulate a seismograph using motion sensor
*Tweaks
Minor system tweaks for performance and usability
US Weather Database
Modified Verizon TF3D Theme with Internet, music, and photo tabs gone. Can be added back in using TF3D Config
Custom TF3D Icons
TF3D Flip Clock on VZW theme
Contacts mapped to left softkey on Home screen.
Internet Sharing
*GPS Fix
Bored GPS is incorporated for the easiest of use
Instructions:
** YOU MUST BE UNLOCKED BEFORE BEGINING! SEE STICKES FOR UNLOCK DETAILS FIRST! WE WILL NOT SUPPORT UNLOCKING IN THIS THREAD JUST FLASHING.
Flash ROM from RUU folder using ROM Update utility. Sync with Active Sync before starting upgrade utility. This ROM flashes just like any other Custom ROM.After flash is complete phone will boot up and AutoRun will start setting up. Do not try to stop this! Phone will reboot on its own when completed.
When Phone boots back up wait for the system to finish loading then...
1. Start Dialer by clicking Green Phone button
2. Dial *22899 and let the programming start. Phone will reboot when completed
3. Click Start -> Programs -> Navigation -> GPS Prep. Install it to the device and not storage card. When install is complete click OK. You should be back in the programs menu under Navigation.
4. Now you see an Installation folder as well as GPS Prep. GO into install folder and run "Run PPST". Select OK to proceed with update. When that is finished select OK when prompted to reboot.
5. Now we need to enable GPS in windows and verify the PRI update worked. Start phone by pressing green button. Service should now say Sprint instead of VZW. You will need to make a call to do this. Dial your voice mail. It should ring in to it no problem and the carrier should now say sprint on the screen instead of VZW. If it does then proceed to next step. If not go to step 1 and start over.
Now click Menu -> Options -> Serivces Tab -> Location Settings -> Get Settings -> Location On -> OK ->ok
6. DONE!
At this point you are done and GPS is unlocked. You can start installing the included GPS apps if yiou choose.
**The included apps have been modified to put the shortcuts in the Navigation Folder under programs. They are the latest versions respectively as of 20 Dec 2008 11:49PM Central Time. They can be uninstalled later to accommodate updated software! Don’t ask in the thread because you will look really silly as I have answered the question here.
Installing Live search and Google Maps then making them compatible, Step by Step!
How to set up Live Search
Install application from \Navigation\Installation\
After installing the application will launch.
Select Menu -> Settings. Arrows Done to GPS COM0 and change it to GPS COM4. Select Done
Now select Map. This brings up the default map. Next turn on GPS by pressing Menu -> Center on GPS.
It can take a few minute for a first fix. After that it much quicker. I also recommend toggle Center GPS on and back off again if it doesn’t pick up in under 90 seconds as a matter of fact the program will force you to. If it forces you to then click Ok then toggle “Center on GPS” off then back on and it will lock quickly! First lock is always hard on fresh flash. After that you should be good to go.
How to set up Google Maps
Install application from \Navigation\Installation\
After installation Google Maps will load for the first time.
Select Menu -> Options -> GPS Settings
Select Set manually and then arrow down and select COM4 then change baud rate to 4800. Now click ok.
Now Select Menu -> Use GPS and you will then lock on!
TomTom7
Install as normal and let it configure the GPS automatically as normal when starting up for the first time.
Done!
Remember: Be patient! It may take a couple soft reset to get it to work but it will. Trust me. Worse case scenario I had with a flash was I had to try twice in Live search then exit live search, toggle location off and back on, restart Live Seach and it locked instantly. Most of the time it will lock on the second try. Its been about 90% consistent under 60 seconds for me. A brand new phone took only two tries with live search and it got it within 15 seconds on the second try.
Note 1: This was done on a brand new in Box XV6850 straight from the VZW store and worked as stated above. These were also conducted using the stock Radio. This was done in the office basement of my house completely below ground. These are results are repeatable as I have don’t them at least 8 times now on two different phones.
Note 2: I have not applied anyother fix to my phone other than the steps listed above. I have not applied the aGPS fix either.
If you want to change the banner than follow the thread for the GPS fix by bored. There are instructions in there on how to fix the banner from Sprint to Verizon.
Downloads: www.scottcrosler.com
Reserved
Update 23 Dec 08
I have uploaded the kitchen. The direct link is below until I update the html. Please ask any questions you have in this thread and I will try to help as much as possible. eRice would not be asisting as I made pretty major changes he would not be able to support.
Just replace the eRice OEM fiolder wiht hte one in the download. Use the kitchen per his post.
http://www.scottcrosler.com/TouchPro/OEM.rar
Ok some users having issue getting the golden first lock try this:
Its cheating but it works. Call VZW and add VZ Navigator to your account. Its free for 30 days. Download and install it. Use the My Location to get a fix. Exit VZ Nav. Start live search, google, tom tom whatever and it will lock right away because the GPS is primed. Once you get that first lock you are godo to go!!! Call VZW at end of 30 days and cancel.
It does take patients. I had it not work right away on about 3 of 15 times trying it since it was out. It will work but requires patients. When paitents runs out try the above.
You can also try the aGPS fix aswell as using the GC provisioning cab. Some users said tha tmakes teh differnece for them.
My best advice: Soft reset and toggle GPS off and then on in phone options. Styart live search and try again. It may take a couyple times but it does work ;c)
About to give this a try, you and bored are f*ckin great!
Ill be back with confirmation and appropriate thanks if all works out!
*sigh* i just have to charge up to 50% battery first lol
Nat2fresg said:
About to give this a try, you and bored are f*ckin great!
Ill be back with confirmation and appropriate thanks if all works out!
*sigh* i just have to charge up to 50% battery first lol
Click to expand...
Click to collapse
Hahahah, I will have tell you how to get around that one day. You think my battery ever makes it OVER 50% hahahaha.....
How to get around: Put phone in bootloader mode. Active sync doesnt check battery status. I flash on 5 to 10% battery most of the time. hahaha... I dont recomend this to anyone other than myself.
Dont try this with the hard PSL though!!!!!!
Thanx Scott, will try this out in a bit. Flashing this stuff is an addiction now...
gh0stb0y said:
Thanx Scott, will try this out in a bit. Flashing this stuff is an addiction now...
Click to expand...
Click to collapse
Good, glad to see my addiction is spreading and no longer contained to just me! Hahahaha...
Let me know what you think.
Just an FYI: You do not have to apply the GPS fix if you choose not too. The ROM can be used as is.
I've been waiting until there was a GPS fix before flashing a custom ROM; did this one this morning and works like a charm. I haven't customized anything yet; just installed the ROM, my Exchange settings, the GPS fix and Windows Live, and it works like a charm so far.
I'll be able to answer this myself shortly; but did you put Voice Command back in?
Thanks so much for all your work.
I have flashed to this ROM and I am not able to get the GPS to work at all.
I am going to reflash the ROM and try again and report back on any progress.
I hope this works for me.
Thanks for your work and Bored as well.
You guys are the reason I went to HTC over Samsung.
You guys ROCK!
Tom Tom Navigator
You mention using the gps with TomTom Navigator 7. Do you know if it would be the same in TT Nav 6 which is what I have? Is there a TTNav7 for US or a way to use it on US maps?
Can someone point me towards more information on the GPS fix? this truly unlocks Verizons GPS for use of any GPS app?
EDIT: oops. Found the info I needed.
Thank to you Scosler, I have been really enjoying my touch pro.
So I reflash the ROM and I am still not able to connect as smoothly as others have been able to.
I followed all directions and still no GPS! UGHHH
Scott, I checked the Device Info for my PRO and saw the following info:
ROM Version = 1.00.0.0
ROM Date = 09/12/08
Radio Version = 1.03.03V
Protocol Version = 7500J-SDCBBPZM-6150
Hardware Versio = 0002
PRL Version = 51143
PRI Version = 1.53_003
Browser Version = MSIE 6.0
ERI Version = 4
Is this what it is supposed to be?
If not, What did I screw up?
RonMac said:
So I reflash the ROM and I am still not able to connect as smoothly as others have been able to.
I followed all directions and still no GPS! UGHHH
Scott, I checked the Device Info for my PRO and saw the following info:
ROM Version = 1.00.0.0
ROM Date = 09/12/08
Radio Version = 1.03.03V
Protocol Version = 7500J-SDCBBPZM-6150
Hardware Versio = 0002
PRL Version = 51143
PRI Version = 1.53_003
Browser Version = MSIE 6.0
ERI Version = 4
Is this what it is supposed to be?
If not, What did I screw up?
Click to expand...
Click to collapse
Nope thats what its supposed to be. Just be patient. Make sure location is turned on, try to get a good a spot where you can see the sky.
I just compared mine to a sprint phone with aGPS and mine actually locked about 15 seconds faster. It took my 7 seconds to lock. Took him 23 seconds.
Try toggling location on and off. Do it while you are trying to connect with live search. It may seem to freeze the phone. If it does it means GPS is working because it wont let you toggle. If thats the case then go back into live search and toggle GPS off again. Then toggle the location setting off and back on. Thats what it took for me one time.
Its touchy the first time but not like that the second and subsequent times.
Be patient, it does work. I couldnt get it to work the very very first time. I had to play with Location Settings off then on a couple times and soft reset a couple times and I was GOLDEN. Most of the flashes I have done already just require the toggle off then on trick.
Be patient, it works. You will get it. Leave your phone by a window if you ahve to and come back in 5 minutes. I think watching the display makes it lock slower ;c)
straylight said:
Can someone point me towards more information on the GPS fix? this truly unlocks Verizons GPS for use of any GPS app?
Click to expand...
Click to collapse
Did you even read the first post? The fix is in the ROM. Just follow instructions.
If you want the fix without the ROM its over at PPC Geeks.
http://forum.ppcgeeks.com/showthread.php?t=49933. THis can be applied to some existing Custom ROM's, any and all versions of my custom ROM, and the stock ROM. Not all custom ROM's have been reported to work. I see three posts for the NexVision ROM stating it doesnt work. I cant say one way or the other. I only use my own ROM's.
This new ROM works like a champ! I followed the instructions exactly and it worked first time without any issues. Great work!
Mike
mmcgough said:
This new ROM works like a champ! I followed the instructions exactly and it worked first time without any issues. Great work!
Mike
Click to expand...
Click to collapse
WOOOOOOOOOOOOOOOOOT! Glad to here man. Like AQTHF Carl would say "Its freakin Awesome!"
And voice command is there, which is huge. Thanks!
tmwes said:
And voice command is there, which is huge. Thanks!
Click to expand...
Click to collapse
Hey guys, glad you liked it! Good stuff or what?
I found TomTom 7.45 locks THE FASTES out of all GPS apps. I locked with TomTom and Live search was in the background still trying to lock.
I also compared my phone against a Sprint Cooked ROM on a Sprint device and my **** locked 3x faster than the sprint device.
Here was the conditions:
Temp -15 F
Time 10:00am
Location downtown Fargo ND
My ROM on my XV6850
Sprint Cooked ROM from PPC Kitchen on Sprint device (Co-Worker)
Both OS were 20931 builds.
We both walked down the stairs form our "vault" of an office. We both flicked on TomTom and stood side by side. Mine locked in 7 seconds, his locked in about 23 seconds. A full 15 seconds difference. **** Sprint and all the **** that was talked. I consisitenantly get faster locks than a sprint device.
FTW!!! MY ROM KICKS ASS. FTW!!!! llllboredllll forever!
Having issue with GPS. When i try to enable location to ON, it just hangs, I get the busy icon and it doesnt do anything. I can push OK and it dissappears but gps doesnt work in any program. I tried rerunning all the gps tools but nothing works. When i restart the phone in settings it shows location ON, but it still doesnt work. When i try to turn it off, it hangs again.
Scott,
I haven't installed this new ROM yet but I wanted to point out a problem I've been having with the last ROM. When I want to download an attachment within an email in Messaging, the keyboard almost always locks up and I can't save the attachments to my TouchPro. It locks up on the screen where I select where to place the document as a 'Save as'.
Other than that, it's all worked great and I can't wait to try out the new GPS fix!
-Brian
hi all,
just recently bought a hero and sorry for the noob questions. any help will be greatly appreciated.
1.) How do i activate the green notification light for any new notifications? so far i can only use the trackball to flash for a number of minutes and thats it.
2.) how can i permanently use 3g as a signal without switching back to edge? i prefer 3g because it is faster, but when i use the web, it reverts to edge making it slower when browsing. i want it never to switch back to edge just 3g.
3.) How do you update radio and rom? is it the same with winmo? i have a topaz and im currently using hero.
Thanks for any feedback!
So far the only answer i found was the notification light as a bug or a defect. line switching is still unsolved and updating.
orouborus said:
So far the only answer i found was the notification light as a bug or a defect. line switching is still unsolved and updating.
Click to expand...
Click to collapse
1) It works as it is stated in the user's manual. How can you state that it is a bug or defect? Funny... Just because it works that way on Magic or G1 does not mean that it has to be the same on Hero.
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
3) There are 1.000 posts on the forum here regarding updating ROM, etc. Search is our best friend.
cokbok said:
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
Click to expand...
Click to collapse
You can force HSDPA, but you do so at your own risk!
You need to download AnyCut from the Market and create new shortcut to the activity "Phone Info". From this short cut, you access a screen which gives lots of diagnostic info about the phones state and there is an option to "Set preferred network type". By default this is "WCDMA Preferred", but if you want to force to always use HSDPA you should select "WCDMA Only".
Note if you do this, your phone will never drop back to 2G, even if a 2G signal is available and a 3G one isn't.
I wouldn't advise playing around with any of the other options in this screen unless you know what you are doing!
Regards,
Dave
cokbok said:
1) It works as it is stated in the user's manual. How can you state that it is a bug or defect? Funny... Just because it works that way on Magic or G1 does not mean that it has to be the same on Hero.
2) You cannot as your phone will automatically switch between them when one another is not available. You phone will select 3G only if it is available around where you are. If it switches to Edge/GPRS/whatever, that means you don't have 3G signals around you.
3) There are 1.000 posts on the forum here regarding updating ROM, etc. Search is our best friend.
Click to expand...
Click to collapse
thanks for the info about point 2.
Thanks again!
foxmeister said:
You can force HSDPA, but you do so at your own risk!
You need to download AnyCut from the Market and create new shortcut to the activity "Phone Info". From this short cut, you access a screen which gives lots of diagnostic info about the phones state and there is an option to "Set preferred network type". By default this is "WCDMA Preferred", but if you want to force to always use HSDPA you should select "WCDMA Only".
Note if you do this, your phone will never drop back to 2G, even if a 2G signal is available and a 3G one isn't.
I wouldn't advise playing around with any of the other options in this screen unless you know what you are doing!
Regards,
Dave
Click to expand...
Click to collapse
very interesting. because for my topaz i always set it to wcdma only. willing to give it a try. where can i download it? do i need a gmail account for this? cant find it any website where it can be downloaded.
Android software is downloadable via the Android Market application on your hero - any purchases are made by using a google checkout account which is set up like paypal so you don't need to enter your details all the time...
Dayzee
Dayzee said:
Android software is downloadable via the Android Market application on your hero - any purchases are made by using a google checkout account which is set up like paypal so you don't need to enter your details all the time...
Dayzee[/QUOT
i tried logging in the market and there are TONS of applications! had to make a gmail accouint for this. hehe!
Click to expand...
Click to collapse
Ya!! What a great resource!! Very different to the WMo world and I like it a lot.....
Dayz
EDIT: This issue appears to have been solved. the newest ril2 and a recent radio for your CDMA handset should do the trick. Thanks muzling, arrrggh and hyc.
The bug seems to vary for people. My signal pretends to be lost after each call, and sometimes after texts. It will still receive calls, but I have to toggle airplane mode if I want to call out or text out.
I don't make many calls so the bug hasn't bothered me much, but I had to make a bunch of calls today while on the road, so toggling airplane mode after each one actually got on my nerves a little. I was going to ask if there were any tasker users here to try out some things, but apparently tasker offers a 7 day trial straight from their site, so I decided to try it out. It crashed on its first run, but seems to be running fine now on FRX07.
It took a few tries, but it seems to be working with this combo.
Profile 1: context -> application -> phone; task-> variable-> Set Variable -> %CALL to 1
Profile 2: context -> application -> phone (NOT); task-> variable -> Set Variable -> %CALL to 0
Profile 3: context -> state -> variable -> %CELLSRV matches "noservice"; task -> Phone -> Radio -> Toggle (if %CALL matches 0); task 2 -> Phone -> Radio -> Toggle (if %CALL matches 0)
My first try had the phone hanging up on me during a call. I figured maybe the phone was reporting no signal before the hangup, so I added profiles 1 and 2 and the user var %CALL to limit the radio toggle to when the phone app wasn't in the forefront. For now at least, it seems to reconnect within a couple of seconds of hanging up. Color me happy.
Links of interest:
Quick tour of avail contexts and actions || User Guide
My next task is figuring out a way to toggle the speaker when I first dial out. It always spits some fuzz when I begin outgoing calls unless I toggle the speakerphone on and off. I haven't found an appropriate context yet (application -> phone would toggle unnecessarily for incoming calls as well, not sure if %SPHONE would detect the speakerphone as being on during the bug), but hope springs eternal.
Interesting solution...
I would much rather figure out the root cause (with a fix in theory to follow), but in the meantime anything to help with sanity is always welcome. Kudos.
Thanks. Root causes are definitely the way to go, I'm just not smart enough to aid and assist on that level. Noticed enough complaints about signal loss, I thought some others might benefit from the profiles.
Tasker is no mortscript, but it seems the closest android analog. I used to kind of enjoy scripting away at winmo's faults, and hope I might be able to smooth some rough edges in my android experience too.
Thanks... I just installed Tasker and added the profiles as you said and will report back if it helps me with the signal loss.
Would you mind telling me why you put the same task twice in the last profile? Thanks
Daved+ said:
Thanks... I just installed Tasker and added the profiles as you said and will report back if it helps me with the signal loss.
Would you mind telling me why you put the same task twice in the last profile? Thanks
Click to expand...
Click to collapse
The first toggle turns off the cell radio, the second turns it back on.
After several days of trials, I ran into an instance (when my phone was a little laggy anyway) where it was endlessly turning on and off, apparently because it was detecting noservice multiple times before the toggle was complete. I haven't done this yet, but adding a several second delay into the mix should prevent loops.
Hope it helps!
signal loss?
signal icon show no signal or signal strength zero level?
Which radio version you use?
I dunno, no signal or no service (incoming stuff still works though), I think it's a little x where the signal bars would be. It's a common enough issue, see the FRX07 thread. I'm using whatever radio is bundled with FRX07.
fortunz said:
I dunno, no signal or no service (incoming stuff still works though), I think it's a little x where the signal bars would be. It's a common enough issue, see the FRX07 thread. I'm using whatever radio is bundled with FRX07.
Click to expand...
Click to collapse
I think he means radio firmware - it's flashed in bootloader mode, and usually comes with stock ROM's... Basically it's completely independent of our Android port.
I'm curious, did you try hyc's updated RIL? There was a slight bug that seems to be helping all sorts of issues, it was related to incoming calls...
arrrghhh said:
I think he means radio firmware - it's flashed in bootloader mode, and usually comes with stock ROM's... Basically it's completely independent of our Android port.
Click to expand...
Click to collapse
Oh, thanks. I don't believe I've made any changes to that. Whatever came with the phone from the factory.
I'm curious, did you try hyc's updated RIL? There was a slight bug that seems to be helping all sorts of issues, it was related to incoming calls...
Click to expand...
Click to collapse
Downloaded it, haven't put it in place yet. Last post I saw had someone recanting on it fixing an issue like this one, but it's worth a try.
hyc's updated RIL not support all radio firmware version,
I encouted the same problem with you when use an special radio, try to use newest radio ( http://forum.ppcgeeks.com/cdma-tp2-...10-rhodium_w-radio-roms-mirrors-included.html )
You can upload your ril's logs,use command "adb logcat -b radio",when signal icon show x, there must be an error like "system need return success, but ril return fail"
It's late, goodnight.
Thanks guys, newest vzw radio and newest ril fixed it.
You needn't read this thread. There is nothing of any import here.
I was unable to learn how to delete it, or I would have.
As I mentioned below, I manually updated this phone to Nougat using the LG Bridge program. It complicates matters that I can't remember the exact time-frame for issues. I do remember getting real-time traffic updates using google maps even after I upgraded to Android 7. And I did stream Netflix once while on a 12 hour roadtrip, but I can't remember if that was before or after the road-trip. I have found and tried many APN's for the H2O service. Some are supposedly specifically for the G5, others just for mms or internet. Most recently, I did a factory reset after backing up my personal data and media. Twice now actually. The first time, I ran the backup software soon after resetting and when things hadn't changed, I surmised that maybe I was just importing the problem back onto the phone in my settings or something, so I reset again and this time only chose two of the settings categories near the top of the list since they seemed separate to the navigation programming.
I'm going to reset again now and see if the maps work with a stock setup, then see if I can slowly add things one at a time and continually monitor the data functionality.
If a moderator sees this and can delete this post, I would appreciate it since it doesn't seem like it could be helpful to anyone else the way it is. If I am successful in getting the data working and this thread still remains, I will post the process I had followed to achieve that in an "Issue Solved" heading at the bottom. Everything between the snowflakes (*****) is the older post and edits.
*****
History of Issue(s):
>This is my first smartphone and my first Android device
> Bought phone used off swappa running MM 6.?
>Have owned phone for around 8 months
>Volume down button wasn't working, figured I could live with pressing vol up and moving it down manually.
> Thought it would be good idea to upgrade manually to Nougat (10h update) Using LG bridge (about 5 months ago?)
> My carrier is H2Owireless, an AT&T MVNO
> Used to have internet, google maps real-time traffic used to work, Netfilx used to work (both without WiFi).
> Could make calls, send texts, listen to Pandora or Spotify and use my Maps for commuting to work.
> Couldn't send MMS pic msgs.
> Began to learn about APN's and what the different network settings did.
>Tried many APN's and fotzed around with Global, LTE/CDMA, LTE/GSM/UMTS and the submode settings
>Can get 4G and LTE , often have to switch back to Global setting to send SMS/MMS
> Had H2O set up APN as best they knew and network settings to what they felt would work best
> Can do anything and evrything when Wifi is enabled (that's never been an issue)
> I thought phone had bricked about 2 months ago while on a roadtrip.
> Discovered on forum that I could swap cam plus for chin and power on that way.
> Turned out power button was no longer functional
> Learned about vol up + charger to power on phone (use an app to power off and restart phone)
> took off cam plus so I could have phone in case.
And now, I'm standing at the edge of a very deep rabbit hole with a phone that can't use mobile data for most internet access (spotify works, Pandora never worked very well). I've discovered that the version of Nougat I'm running is problematic (update 10h Brightpoint) and that my forcing the update to Nougat might be largely responsible for these issues.
I see myself having a choice between learning how to flash the phone back to Marshmallow, or learning how to flash it up to update 21c... or live without mobile data for most of the functionality I wanted from the phone...
I seek advice from the the forum for which of these options people think I might best choose. Do I need to acquaint myself with these programs used to flash the ROM? Does it seem to you readers that my problems are symptomatic of those which are best rectified by flashing up? Or rolling back to Marshmallow...
I just want to be able to google something while I'm away from wifi.. to get traffic updates while I'm using the navigation.. to listen to spotify.. maybe even watch something on netflix... (calling, SMS and MMS functionality is a given, but I do still have them for the most part).
I can pick things up if I read tutorials / guides... I've flashed PC BIOS before... I could figure it out if I needed to...
But maybe I just need a new chin or clean it? Maybe I should factory reset? Maybe there's other potential causes I'm unaware of?
Any and all suggestions are welcome. It's late here and I won't be reading any responses until tomorrow at work.
Thanking you very much in advance. --Wayne
Edit: I was about to check LG Bridge to see if there was an update available for nougat.. thought I would get this out there first since I was pretty sure I wouldn't get both done tonight..
3rd edit: I checked for LG update, nothing available. I finally decided to factory reset before getting into flashing. That seemed to fix the google maps issue as it seemed to be working without WiFi enabled (I say 'seemed' because my office is slightly below grade and getting a good signal is tough. If it's not working, the address remains grayed out and the connection just buffers, the address filled in after the reset. Then I decided to move some of the things I had backed up from the SD card but neglected to deselect the settings box. After restoring much of what I had backed up, It seemed more like how it had been before the reset. I noticed a small icon next to the signal type and strength meter at the top which hadn't been there before the reset (a small white square with rounded edges that has a zig-zag line going through it that kind of looks like a jagged "N"). Instead of saying offline, the app says poor connection, so I will test it on my way home.. I am hopeful. It seems promising. If I have to reset again, I will deselect settings and set things up fresh; I think that will help. I am beginning to think this isn't so much about my OS or any hardware failure as it is the H2O at&t mvno being throttled or something similar. Even when I'm getting 4 bars of 4G, the maps loads very slowly.. nothing at all like it does on WiFi.
I'll post a final edit after I try it out on the ride home this evening.
*****