Whenever i connect it to my desktop both of them hangs desktop and Athena
i tried many roms also down graded to 1.2 but still same problem
i changed the cable, i tried it in another desktop, laptop but i have the same problem
hard reset i did in all the roms no use the moment i connect it hangs and when i disconnect it becom normal
i also formated the micro drive and i removed storage card
any one can help me
regards
Abu Shahad said:
Whenever i connect it to my desktop both of them hangs desktop and Athena
i tried many roms also down graded to 1.2 but still same problem
i changed the cable, i tried it in another desktop, laptop but i have the same problem
hard reset i did in all the roms no use the moment i connect it hangs and when i disconnect it becom normal
i also formated the micro drive and i removed storage card
any one can help me
regards
Click to expand...
Click to collapse
Just a simple suggestion but try cleaning out the temporary files etc. stored on the Athena also delete the partnership with the pc, uninstall activesync, reboot the PC then reinstall activesyn then reconnect the Athena. Try to sync the bare minimum first (calander, task, and favorites). I had to do a hard reset before I could get my email to sync my emails also.
tootallk2000 said:
Just a simple suggestion but try cleaning out the temporary files etc. stored on the Athena also delete the partnership with the pc, uninstall activesync, reboot the PC then reinstall activesyn then reconnect the Athena. Try to sync the bare minimum first (calander, task, and favorites). I had to do a hard reset before I could get my email to sync my emails also.
Click to expand...
Click to collapse
Thanks
i Did all this but still same problem
regards
It seems a PC problem... have you tried another PC? Are you using VISTA or XP?
sergiopi said:
It seems a PC problem... have you tried another PC? Are you using VISTA or XP?
Click to expand...
Click to collapse
He did mention that he tried several computers: "i tried it in another desktop, laptop but i have the same problem".
So the common denominator is the Athena, but not the OS. Starting to sound like a hardware problem. Did this start after you dropped it, or left it in a hot car?
Related
Suddenly, by USB sync is gone. I can BT ActiveSync and serial, but no USB. I am sure it's something in software, because after hardreset it recognized via USB again.
Any ideas?
TIA
little help
:idea: I had the same problem twoweeks ago ,and I realized that from some strange reason one small application repllog.exe (located in windows directory) is not activated anymore. This aplication activates USB communication, and when you run this manually -active-sync will work. However I dont know how to fix this problem to run it automaticcaly, but -i don´t want it eather, because of I´m using connectionto internet through GPRS of my XDA2 (WModem+HTC USB modem driver+USB modem dialer) and automatic sync via ActiveSync makes collision in communication (blocking USB port)......
From M$ site:
PRB: ActiveSync May Stop Responding or May Not Connect After Many Soft Resets
SYMPTOMS
If you soft reset Microsoft Windows Mobile 2003 for a Pocket PC device or for a Pocket PC Phone Edition many times, the device may stop responding when you synchronize with Microsoft ActiveSync through a serial cable or a USB cable. Infrared transfer speeds are not affected.
RESOLUTION
Hard reset your Pocket PC device. For more information about how to perform a hard reset, see your device documentation.
MORE INFORMATION
Restoring an ActiveSync backup may not resolve this problem if the backup was made when the problem existed.
To reproduce the problem, perform a soft reset several hundred times.
I've root it down this problem to notifications queue. Memmaid apprently killed repllog.exe, as mcmills correctly pointed out.
I also recently encountered this problem. I cannot, however, find repllog.exe.
I even usedthe search function but the file is just not there. I am an
experienced user and I do not remember deleting anything.
By the way, I'm using Windows 2000 SP2.
repllog.exe
For>ahro
this file is not in PC, but in XDAII, so you need to look there: XDAII_root\Windows\repllog.exe ....
Prior to upgrading my Advantage X7500 to WM6 it synchronized with both WinXP and Vista w/o a problem. Since I upgraded to WM6 I've had virtually no success getting my X7500 to sync with either OS. Must be a setting I've got messed up or something. I'd welcome suggestions to resolve this.
Try to go on setting connection usbtopc and disable advanced network functionality and ok
Thanks -- I tried that but it had no effect. Even did a hard reset and was able to get it to sync to Win XP (very slowly) but when I restored my backup I'm stuck again with it sitting w/o syncing, or giving a synchronization error. Problem is there's no help when this happens -- just the troubleshooter but that doesn't find anything wrong.
brucewilsonpa said:
Thanks -- I tried that but it had no effect. Even did a hard reset and was able to get it to sync to Win XP (very slowly) but when I restored my backup I'm stuck again with it sitting w/o syncing, or giving a synchronization error. Problem is there's no help when this happens -- just the troubleshooter but that doesn't find anything wrong.
Click to expand...
Click to collapse
stupid question perhaps but are you using the latest Activsync?
Wm6 doesn't work with A/S on older versions, though if you could sync very slowly this is unlikely to be the problem.
It could be that one of the programs you are attempting to re-install is incompatible with WM6, or that the backup file (if you are using software other than A/S to reinstall your data) is corrupted in some way, though I'm not techy enough to know the ins and outs of this
If you have all your data backed up somewhere and haven't tried this already then uninstall Activsync from your pc and then delete the activsync folder from your program list:this folder contains the windows mobile drivers and would otherwise remained regardless of A/S being uninstalled. It worked for me when I couldn't get my Hermes to sync - though I've had no problems with the Athena (touch wood!)
Also have you tried on a different PC?
Regards
leoni1980 said:
stupid question perhaps but are you using the latest Activsync?
Wm6 doesn't work with A/S on older versions, though if you could sync very slowly this is unlikely to be the problem.
It could be that one of the programs you are attempting to re-install is incompatible with WM6, or that the backup file (if you are using software other than A/S to reinstall your data) is corrupted in some way, though I'm not techy enough to know the ins and outs of this
If you have all your data backed up somewhere and haven't tried this already then uninstall Activsync from your pc and then delete the activsync folder from your program list:this folder contains the windows mobile drivers and would otherwise remained regardless of A/S being uninstalled. It worked for me when I couldn't get my Hermes to sync - though I've had no problems with the Athena (touch wood!)
Also have you tried on a different PC?
Regards
Click to expand...
Click to collapse
Thanks for your detailed suggestions:
I've narrowed the issue down to syncing the calendar -- sometimes tasks and contacts sync -- the rest seem OK. I've searched MS forums and KB for the Support Code 86000107 that continually pops up when I try to sync in AS 4.5 -- to no avail.
Yes, I'm using Activesync 4.5 in WinXP and the WMDC (latest) in Vista -- I have the same problem in both. And I have tried AS 4.5 in another computer running XP -- same issue. What is bothersome is that I did not have this problem when I had the shipped WM5 version that came on the Athena, only since I upgraded the rom to WM6.
I ended up trying to hard reset and see if that would eliminate the problem -- it did improve the syncing (before I couldn't get it to sync anything, just sat there searching) but now I have this problem with the calendar (skips right over the contacts, calendar and tasks -- then syncs the other items).
I did a scanpst to find and repair any errors in my outlook file (there were some). I removed AS, deleted the AS folder as you suggested, reinstalled -- no change.
At this point I'm baffled -- obviously the phone is only marginally useful so I'm going to switch back to my Hermes for the moment. I just don't know where to look for possible solutions -- maybe when the "official" WM6 rom for the Athena is released on Wednesday, that will be different??? But, since my problem seems to be unique to me, I doubt it.
Thanks again -- I appreciate you help. Any more suggestions are certainly welcome.
It sounds as though maybe your outlook pst file is hosed. You might try...
Export your entire outlook data file to another pst file. Don't just move the pst file. make sure you export it (export file pick pst)
Delete everthing in your outlook data file on your pc and pda.
Sync your pda with an empty outlook file. If that works Then import your pst file from above to your pc and try to resync your PDA
sometimes this works when the pst file on the pc is somewhat corrupt...
Good Luck.
IS your tytn syncing ok with the same setup? Tytn wm6 or wm5?
eagle 1 said:
It sounds as though maybe your outlook pst file is hosed. You might try...
Export your entire outlook data file to another pst file. Don't just move the pst file. make sure you export it (export file pick pst)
Delete everthing in your outlook data file on your pc and pda.
Sync your pda with an empty outlook file. If that works Then import your pst file from above to your pc and try to resync your PDA
sometimes this works when the pst file on the pc is somewhat corrupt...
Good Luck.
IS your tytn syncing ok with the same setup? Tytn wm6 or wm5?
Click to expand...
Click to collapse
That seemed to solve the problem -- apparently, all my pst files were corrupted, perhaps from having synchronized them among the various drives I have them stored on. Fixed one with scanpst, then followed your recommended steps and I now seem to have a new pst file that does synchronize with my Athena.
Thanks for your help. I "hope" my problem is solved!!
BTW -- found that my Hermes would not sync either -- that confirmed the suspicion of the desktop pst file being corrupted.
brucewilsonpa said:
That seemed to solve the problem -- apparently, all my pst files were corrupted, perhaps from having synchronized them among the various drives I have them stored on. Fixed one with scanpst, then followed your recommended steps and I now seem to have a new pst file that does synchronize with my Athena.
Thanks for your help. I "hope" my problem is solved!!
BTW -- found that my Hermes would not sync either -- that confirmed the suspicion of the desktop pst file being corrupted.
Click to expand...
Click to collapse
Glad I could help!
I hope your problems are now solved
I have a x7500 bought off ebay but cannot activesync
I have a x7500 I bought off ebay but cannot activesync I have tried both usb and bluetooth but no luck. with USB the computer does not even see the device only charges it. with bluetooh I can ftp files and send notes,and contact info, but when I tried to bluetooth activesync the x7500 does not see the partnership, also when I go the bluetooth configurations on the computer to quick connect on bluetooth serial ports and select the x7500 it says the device does not support it.
I have tried changing the usb-pc off and on and no difference. I have even installed the usbsettings.exe and nothing also. I also have hard reset the device nothing is working. Any Ideas.
computers are xp (all threee of them) and the device is WM6
ROM AP TOUCH 3.0
James
Scanpst is completely hidden in Office 2007 and very hard to locate in Vista. Once I did find it and ran it, it appears to have cleaned up a lot of problems. It does no good for WMDC to tell you it has found an error as there is not even a hint as to where the problem lies. It just goes ahead and replaces all the files on your device with the ones on the computer (or vice-versa depending on your settings). I'm hoping this fix of about 134 problems in my pst file will keep things going for a while.
Brad
I am having the same problem with my work computer (XP). Everything syncs fine on my home computer (Vista). I upgraded my rom to DCD 2.2.1 ROM, and I keep getting the 86000107 error.
At work, we are using Outlook 2003/Exchange. I've created new profiles, uninstalled/reinstalled AS 4.5 countless times. I closed out the exisitng PST file..
I am stumped.
I'm trying it on a new computer tomorrow to identify where the problem lies. Anyone have any thoughts?
Similar problem solved
I had the same problem and went through many steps like those posted in this forum. I'm going to show my steps to solve this problem without hard reset your phone.
1) When the phone is connected, at the phone ActiveSync setting delete the PC profile.
2) Unplug the phone from the PC.
3) Uninstall and then reinstall the ActiveSync or Windows Mobile Center.
4) At phone system setting -> About -> make sure there is a name ID. Without this the PC cannot identify the phone and thus cannot sync.
5) Set the USBtoPC with 'advance network..." enabled.
6) To the extreme, before step 3, go to PC windows\inf and remove infcache.1 (need to add in an administrators account and set the privilage to full control). That may remove old corrupted drivers.
The last while my HD2 wont connect with my desktop. I connect with the USB and the phone just charges i cant physically move files unless i change to Disk drive. I thought this might have been a problem with the ROM i installed (Dutty's Creme De la Creme) But the phone connects to my laptop as it normally would and any other computer.
I recently did a fresh install of my pc OS and i still seem to have the same problem i still cant locate the phone. (unless i choose disk drive)
Iv tried everything that i can think of to fix it but nothing. Can anyone shed any light
Cheers,
russe
go to settings, connections, USB to PC and untick the box for faster data sync.
"pair" ur phone with ur PC and after that tick the box again....
seriously i tried absolutely everything to try fix this, And that was all i needed to do ha. Thanks v much worked brilliantly
phone wont contect to mobile device center
i flashed NRG Cookie Rom Aug 6 and now i can no longer connect. it shows in my device manager as USB unrecognized. I've tried uninstalling and reinstalling windows mobile device center still nothing! First this has happened to me UGH! is there a stand alone HD2 driver? sorry i forgot to mention that i'm TOMUS
Hi, when i´m trying to connect my hd2, there appears the error usb port code 43.
dunno what i should do, the only thing i didn´t try yet was hard reset. All other things didn´t help.
I use standard usb 2.0 with windows 7 ultimate 64 bit.
things like new drivers, soft reset, spb backup didn´t help.
on my hd2 i have installed spb ms, standard o2 rom, framework ms 3.7 now. i tried to connect without the sd-card, nothing!!!
i can´t use the sd-card without the hd2. My pc doesn´t find it, but my hd2 does and i can use it on my ppc.
looking forward to your help
da Uzb3k
First try to remove the device from your hardware manager.
I do not know about Windows 7, but in Xp/Vista:
log on as administrator, right-click "my computer">manage then select Device manager.
In XP you will first heve to set a system variable to let you see hidden devices in order to be able to remove them.
(read this article)
Then try reconnecting the device.
Try to insert your USB plug fast and surely (most of these error are cause by slow insertion of USB plugs. Init of the device then can get interupted, resulting in faulty drivers/harware recognition)
thx a lot...but sry it doesn´t help. my windows still does not finding my hd2 and the sd card in it! I really often tried it with ghostbuster, but after rebooting when i´m trying I can find my divice ghosted in ghostbusters list
1)Do you have windows mobile device center installed?
2)Have you tried another USB cable?
3)Do you get this error with any other USB device?
4)Can you connect your HD2 to another computer?
the last thing i need to do is to try another usb cable
my computer would not recognize my infuse...
(btw i have windows 7 ultimate)
have kies installed on my computer, tried uninstalling, reinstalling..still no hope
when i connect my phone to comp it says device not recognized
i dont think there is any problem with my cord, because i just root my bros captivate today with the cord i have.
any suggestions?
Similar issue for me
i have a simialr problem but for me its the phone gets recognized but it wont let me do mass storage so i cant drag and drop things to and from my phone.
HOWEVER i did find a app that made the cable not neccissary.
its called "Software Data Cable"
it hosts a ftp server off your phone and over wifi lets you connect to the phone with a ftp client like filezilla and move or copy things from your phone without having it plugged into your computer, you can set in the settings, a username and pass so connection can be secured.
by default the app sets the port to 8888 witch for me didnt work so i used 6464
and it works fine.
-really recommend setting a username and password to be required to connect
yea that would be good for transferring data..
but what if i brick my phone and cannot connect to pc. then im screwed
e0mandaniel said:
yea that would be good for transferring data..
but what if i brick my phone and cannot connect to pc. then im screwed
Click to expand...
Click to collapse
Thats why i always keep a spare kernel and ROM that i know works completly on the sd card just in case, along with backups of recovery and boot and system.
e0mandaniel said:
yea that would be good for transferring data..
but what if i brick my phone and cannot connect to pc. then im screwed
Click to expand...
Click to collapse
This is one of the very real risks you run when flashing custom rooms.