I try to up rom atom life. Use official rom wm6. while it up untill 17% computer was shut down. Now my atom show "Please plugin the cable and re - enter the eboot" . Then I connect to computer again and Start to up rom again but it show connection error.
Anyone please help me
I also had same problem like you a few months ago,but i am not sure what i did to correct the problem. but if i'm not mistaken, what i did is i download any cooked rom that available in this forum and suitable for my pda (atom life). Then i transfered it into my external memory. and first i upgrade my pda to the cooked rom. this process does not require for connection to computer as it require the pda alone. you may try this. after you have upgrade it, you may connect back to your computer and upgrade back to the original rom that you want before. but make sure before you upgrade you have at least 70% battery. good luck. sorry for my bad english,hope you understand.
esygo said:
I try to up rom atom life. Use official rom wm6. while it up untill 17% computer was shut down. Now my atom show "Please plugin the cable and re - enter the eboot" . Then I connect to computer again and Start to up rom again but it show connection error.
Anyone please help me
Click to expand...
Click to collapse
Here you go how to:
- unploug battery about 2 minutes
- replug battery
- go to bootloader again
- restart computer
- flash again
That will work,. dont worry,.
BR
thank you
Thank for your help. It work now.
Related
Dear All,
now the most needed is the HELP.
So, Please HELP me
I lost the bootloader, even the normal Boot.
the device totally dosn't work thet for I tried mini SD method toremove exec rom.
I LOST EVRY THING
I guess you're and I are in the same boat, I got the same problem after upgrading via SD card method.
Let's keep in touch in case one of us find anything usefull to revive our Atom.
snafi said:
Dear All,
now the most needed is the HELP.
So, Please HELP me
I lost the bootloader, even the normal Boot.
the device totally dosn't work thet for I tried mini SD method toremove exec rom.
I LOST EVRY THING
Click to expand...
Click to collapse
If you dont take advice or bother to read various threads about the procedure to flash back to "Standard Atom rom" from Exec rom, then you shall end up with a device that is good for only holding paper down when it is windy. here is a simple way to go back, first execute Standard Atom Rom (no need to have device connected) click next until you reach the "Welcome to device update utility", now go to Windows/Temp folder and copy everything EXCEPT! "Device Software Update Utility" and "ExtendedRom" now paste those files somewhere. Close the installer and execute "Exec rom" until you reach, "Welcome to device update utility", now copy and overwrite the files in Windows/Temp with the files you saved earlier.....continue with update procedure. After this proccess is complete disconnect your device and put it into bootloader, now plug in USB and flash with Standard Atom rom.
Dear homer285 :
The device TOTALLY DEAD.....!
one thing that the device response with it The Charger that when I connect it .... by the orange light...Other NO response
At lest I need to go back to the Bootloader then I will try the procedures
homer285 said:
If you dont take advice or bother to read various threads about the procedure to flash back to "Standard Atom rom" from Exec rom, then you shall end up with a device that is good for only holding paper down when it is windy. here is a simple way to go back, first execute Standard Atom Rom (no need to have device connected) click next until you reach the "Welcome to device update utility", now go to Windows/Temp folder and copy everything EXCEPT! "Device Software Update Utility" and "ExtendedRom" now paste those files somewhere. Close the installer and execute "Exec rom" until you reach, "Welcome to device update utility", now copy and overwrite the files in Windows/Temp with the files you saved earlier.....continue with update procedure. After this proccess is complete disconnect your device and put it into bootloader, now plug in USB and flash with Standard Atom rom.
Click to expand...
Click to collapse
Is this a remedy for me if I keep getting the country id/device id error when attempting to flash my atom with the atom exec rom?
the atom won'y turn on at all, not even the screen. the usb not recognise by pc. Bootloader mode not working, Diagnostic mode not working also
Click to expand...
Click to collapse
Same Problem & Same Feeling
First, remove battary out for half an hour to compleately drain power in atom
,then put in battery and press reset+camera to bootloader again
Tube216, your suggsted method does not work. My ATOM just reboot when I have removed the battery for 2 hours and plug it back, press camera and reset button and it just reset without going into the bootloader mode. I think the bootloader is damaged regardless of the battery. Do you have the bootloader program to be run in explorer?
the quastion :
Can I Re-Program the bootloader with normal PC?
if yes, Name the program
Sorry for my english fisrt of all. When i upgrade wm5 to wm6 i lost the connection with the pc. Both s200 and pc stop to response. I restart the pc and now the ActiveSync can't recognize my device. To my pda now appears a white screen and i can't do anything on it. What can i do???
manolisf said:
Sorry for my english fisrt of all. When i upgrade wm5 to wm6 i lost the connection with the pc. Both s200 and pc stop to response. I restart the pc and now the ActiveSync can't recognize my device. To my pda now appears a white screen and i can't do anything on it. What can i do???
Click to expand...
Click to collapse
There is a WIKI for this, but I guess you're to much in a stress to search...
First of all, Allthough it looks like that connection fails on several moments, don't panic. That's only normal, just be patient after some nailbreaking minutes (or even more...) things will continue.
What to do with your device now? Put it in bootloader mode:
Press the Camera button and soft reset. It will startup with a tricolor screen.
DISable the "allow USB connection" setting within ActiveSync
Connect your device to the USB port of your PC
Run the WM5 RUU again that you were using for the "Step1"
And now, just be patient!! First it seems to stop at 80% but it will continue. Then it pauses again at 95% but don't worry. Eventually it will make it to 100%.
After that: do nothing, don't touch nothing, just start the "Upgrade.bat" from the "Step2" folder. That will take some time to before it finishes, but it will. At last, DON'T FORGET TO MAKE A PROPER HARD RESET!
Rondol1 thank you. You don't know how helped me now. I lost ten years of my life. It works, thank you.
manolisf said:
Rondol1 thank you. You don't know how helped me now. I lost ten years of my life. It works, thank you.
Click to expand...
Click to collapse
You'r welcome, I spoke out of experience......
hahaha, I remember my first wm6 upgrade that went wrong , i freaked out the same way
hma4 said:
hahaha, I remember my first wm6 upgrade that went wrong , i freaked out the same way
Click to expand...
Click to collapse
Me too .. Guess thats just normal.. Upgradnig to a hole new operating system makes you think that it is critical to your pda's life.. And when it goes wrong you think your pure prophet is gone..
manolisf said:
Sorry for my english fisrt of all. When i upgrade wm5 to wm6 i lost the connection with the pc. Both s200 and pc stop to response. I restart the pc and now the ActiveSync can't recognize my device. To my pda now appears a white screen and i can't do anything on it. What can i do???
Click to expand...
Click to collapse
I advice u following this way:
1 - U unplug the battery for few minutes, then plug it into ur device
2 - Charge ur battery until it full (about 2 hours). Note: DO NOT USE USB_CHARGE, just use the adaptor.
3 - Uninstall the current Active Sync, then install the newest Active Sync from Microsoft (ver. 4.5)
4 - Turn on ur Prophet, then make it in the Bootloader status, connect with PC, up the step 1 (from PDAViet). Be patient until it complete.
5 - Continue with any step 2 u like.
Good luck.
Me ! Help me pls ! Stuck in bootimage and Win
My Xda Neo, it's stucked WIN, now it appeared bootimage blue ---> Align Screen --> Win ---> hang ---> and not connect with PC by active sync " LED always ON " ).
I used J A F tool may saved myxda but i couldn' do anything ( Stranged " I can up any rom by J A F and Active Sync )
I changed from 2.20.0001 to 2.13.0001 and 1.00.0001 and more but it's not still work now. Although I downgraded but IPL/SPL not changed 2.20, only changed OS ???
Who can show me how to resolve ! Pls help me !
Thanks !
Dear All master,
I need help on my o2 Atom, when I upgrade it to latest version, it stop on stage 5: Burn in Radio Rom, 0%. Nothing happen even I had to wait for 1 hour.
I upgrade it with original atom rom from o2 site : 'Xda-Atom-ENG-20060426-MOT0822.exe'
The device stay in "O2" screen. this device can switch to diagnostic mode.
what should I do?
Note I repeated loading rom but Ietunai problem in Flash
Probably the Radio Hardware broken.... try to install without the Radio ROM.
sliders7 said:
Probably the Radio Hardware broken.... try to install without the Radio ROM.
Click to expand...
Click to collapse
from wher i can find that rom ?
or can u upload it ? for me plzzzz
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
medkid said:
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
Click to expand...
Click to collapse
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
waseemraj said:
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
Click to expand...
Click to collapse
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
sliders7 said:
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
Click to expand...
Click to collapse
i just do as u say but the but it fail gives the eorr as i told in my last post
and plzz tell me is i just have to get it in bootmode and conact it with usb and start updating
what is DSUU?? is this the file Xda-Atom-Exec-ENG-20060721-MOT0822 ? or what ?
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
homer285 said:
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
Click to expand...
Click to collapse
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
some one plzzzz help me ? for my atom exec
waseemraj said:
some one plzzzz help me ? for my atom exec
Click to expand...
Click to collapse
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
sliders7 said:
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
Click to expand...
Click to collapse
The above information will likely do more harm than good!
waseemraj said:
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
Click to expand...
Click to collapse
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
homer285 said:
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
Click to expand...
Click to collapse
Confirm!!!
I have done this also even using 1 GB memcard, my memcard is NCP mini SD.
I don't know it was lucky or it does work for 1 GB memcard. Even with non empty one.
But becareful, maybe I am just lucky, perhaps you should use 256 MB or 512 MB only.
homer285 said:
The above information will likely do more harm than good!
Click to expand...
Click to collapse
hei... he is desperately need help.
We all want to help him, thats all i can offer.
If you have different method.. thats a good news for him.
everybody here try to help him.. contribute something to help him.
so no more harm to his already broken device.
think the brighter side!
cheers
Dear All,
I download Kumara ROM and flash it, at the final stage 5 the screen can't see any progress bar, only show 0%. After waiting for more than 3 hours the screen still maintain 0% of Stage 5. So i unplug the USB cable, my computer immediatly show me connection error.
Hard reset my device, everything works except Radio (No GSM).
Any guys can help me
Thanks in advance !
Best to ask support from author
Re-extract all your file to windows/temp. And if u have dsuu from chartreux please choose ALL to progress
Make sure no other program run in the background on your PC (I would suggest you to disable your antivirus as well . who knows... ), and don't use any USB connector.
Thanks for your advised, will try again later.
Already know that stuck at Stage 5, device show is Stage 4 100% complete...
The problem I have is that my HD2 used to last for about 48hrs, but after playing around with it as we do with roms! the battery life suddenly drained in hours.
Battery used to last about 48 hrs with a charge time of less than 2 hrs. It then started to last 8hrs with a 4hr charge time, now it lasts 6hrs.
This is with all apps turned off no data connection, only sending txt and quick calls during the day. 100% power at night and it will be dead by the morning!
I have removed all programs and gone back to UK t mobile 1.72 rom, with same results.
I phoned T mobile and they have been kind enough to send me another free battery to solve the problem but to no avail!!!!
I am now going to send it back to get repaired, however HSPL is installed and it is being a proper pain to remove. I have done searches and watched the utube clips, so please dont say use search, as I have done for 2 days now!!
My HD2 will not enter bootloader by the buttons, I HAVE to use the bootloader cab file and install it and do it that way. Next problem is when it asks me to press the power button to start update image, it does not respond to the power button or the down button to cancel! (have to pull battery of to restart)
I have tried lots of renamed ruu_signed files (uk t mobile and htc) on a FAT32 formatted SD card, same problem.
details are as follows
OS version 5.2.21889 (21889.5.0.87)
Manila version 2.5.20121429.0
ROM version 1.72.110.4 (86525) WWE
ROM date 04/02/10
Radio version 2.07.51.22_2
Protocol version 15.32.50.07U
Really need to get rid of HSPL so it can get repaired!!
Any ideas to this strange problem? Anyone experienced this aswell?
Thanks in Advance
AJ
run hspl2 and choose 1.66.0000
hspl gone.
Thanks for the quick reply!
I downloaded and tried to install HSPL2 from the search results.
I follow the on screen instructions, as it waits for a USB connection I get an critical error box appear on the laptop.
Flow: 00000001
Error code: 00000002
Description: USB Connect failed!
Freezes on the bootloader screen.
I have tried all 3 USB ports on the laptop and another USB cable to no joy!
Has my phone got gremlins crawling inside it or what!
Any help to save my sanity will be greatly appreciated!
Thanks
AJ
normally i would say enter bootloader manually then run hspl but you cant, so, let it fail, then exit hspl, leave teh phone in bootloader, and run it again. You can try over and over, different ports, whatever, no need to re start the phone each time, just leave it in bootloader and connect the usb cable.
As always, the following applies,
1 - right click hspl.exe and choose run as administrator
2 - dont use front mounted usb ports, or ports through hubs, DO use a port around back of the pc (i.e one connected to teh motherboard) EDIT - oh its a laptop, could be problematic, find a friend with a real computer.
Just cos a port works for active sync doesnt mean it will work for hspl, so keep trying ports.
If all else fails use a different pc.
Cancel last, it just worked!!!
Thanks very much for your help.
One question though, now that the spl is 1.66 and the original was 1.42, can they tell that the phone has been tampered with?
aussiejock said:
Cancel last, it just worked!!!
Thanks very much for your help.
One question though, now that the spl is 1.66 and the original was 1.42, can they tell that the phone has been tampered with?
Click to expand...
Click to collapse
you said you upgraded teh rom to 1.72, , well if you hadnt had hspl installed it would have upgraded the spl to 1.66.0000, which is why i said go for that one.
Thanks Samsamuel,
Everything is back to normal. I put it in for warranty repair yesterday, need to wait 2-3 weeks now!
again thanks for your help.
AJ
hehe, start marking off the days on ya calendar.