Hello all,
I'd like to have a fresh start with my Prophet. I was on Gullum's Touch version (one of them) and would like to try another one.
I suspect my PDA though is a bit messy with all the other stuff I tried at the same time.
What would be the best way to have a good clean start over?
Any recommended Rom?
Many thanks for your answers!
do a hard reset & read the new way of upgrading to wm6/6.1 & choose a rom...
Thanks for your reply.
Would that erase the previous installation or just overwrite?
As I said, I'd like to have something clean. If it does like any software reinstalled, then it's not going to be that clean.
Unless you confirm it does.
k0rand's wm6.1 is the fatsest and most stable ive ever used. It is clean but still functional.
I've been using it since launch and no intention of changing (I used to try out new roms every few weeks).
littld said:
k0rand's wm6.1 is the fatsest and most stable ive ever used. It is clean but still functional.
I've been using it since launch and no intention of changing (I used to try out new roms every few weeks).
Click to expand...
Click to collapse
Subscribe!
Tigrou said:
Thanks for your reply.
Would that erase the previous installation or just overwrite?
As I said, I'd like to have something clean. If it does like any software reinstalled, then it's not going to be that clean.
Unless you confirm it does.
Click to expand...
Click to collapse
The memory of your PPC is a little different from the hard disk of your PC.
I'm not going into every technical detail, but you could picture it divided in seperate compartments. One of them is the OS-compartment. If you flash your PPC, the whole content is replaced, no file-by-file overwrite, so no previous software remains. This content is what we call "ROM". It is shielded from the rest of the memory and can't be altered by normal usage.
But there are more comparments on you device. An other one is called "Storage". This one you ca compare with your PC's hard drive (together with an optional SD-card). In most cases when you flash your PPC, it will be erased, but don't count on it. It is this part that is reformatted when you perform a hard reset. That's the reason it is recommended to do a hard rest after flashing: just to be sure all "ancient history" is eliminated.
Then there is what is called "extROM". This is a dedicated part is the memory that can be used (but not all cooks use it) to extend the ROM. It is a bit hybrid: it behaves as shielded ROM memory but under circumstances you can write and erase files stored in this part. It is often used to store customisation files that are installed automattically after a flash/hard reset. But some cooks use it as extra storage to save capacity in the normal memory.
Resume:
After a (re)flash of your device using the new RUU method, you may assume that your device is totally REwritten, not just OVERwritten. But to be sure you better perform a hard reset afterwards.
Many thanks rondol1 for your very comprehensive answer!
I have a rooted CDMA Hero, with stock Rom software version 1.6. I have removed a lot of the apps that came on the phone by reading and learning here, thanks to everyone for that. I now want to install the AppsToSD 2 app, first off, I noticed it's no longer available in the Market, but anyway, I read here almost everywhere that one has to either install "the Dude's" or "JF 1.5" rom to get AppsToSD 2 to work. I have some terminal / linux command knowledge, which I used to root the phone, but I just want to know if with that knowledge, is it possible to install AppsToSD 2 on a STOCK rom like I have, and move the apps to the sd card? I just don't want to install a non-factory rom and modify the OS to that level, removing some stocks apps is one thing, but I don't want to go through the hassle and dangers of flashing a new rom. So is there any way I can still get AppsToSD to work with my stock Hero rom?
Thanks for any suggestions
newuser134 said:
I have a rooted CDMA Hero, with stock Rom software version 1.6. I have removed a lot of the apps that came on the phone by reading and learning here, thanks to everyone for that. I now want to install the AppsToSD 2 app, first off, I noticed it's no longer available in the Market, but anyway, I read here almost everywhere that one has to either install "the Dude's" or "JF 1.5" rom to get AppsToSD 2 to work. I have some terminal / linux command knowledge, which I used to root the phone, but I just want to know if with that knowledge, is it possible to install AppsToSD 2 on a STOCK rom like I have, and move the apps to the sd card? I just don't want to install a non-factory rom and modify the OS to that level, removing some stocks apps is one thing, but I don't want to go through the hassle and dangers of flashing a new rom. So is there any way I can still get AppsToSD to work with my stock Hero rom?
Thanks for any suggestions
Click to expand...
Click to collapse
No, it's a no-go!
shelnes said:
No, it's a no-go!
Click to expand...
Click to collapse
sorry to rain on your parade, but it is possible, and not that hard.
boot the custom recovery image, partition your sdcard, move the apps to the ext partition, create the symlinks in /data and reboot. there you go, stock rom, stock recovery, apps on sdcard. works until you flash a new rom (which would delete the symlinks so you'd have to recreate them), but since you don't want to do that you are good to go.
My bad! Sorry! To my defense I have to say that someone told me it wasn't possible. I'll start double-checking my sources from now on.
Hi,
I am new to Android and the Gtab. I am basically curious as to what the best way is to backup my Gtab. What software and the steps to take (what is the difference between cwm and nvflash?).
I actually like the stock rom but my biggest frustration is the lack of the market which I would like to have. Having that said, I would like to run something different on the Gtab which will support the market app and not the Gmarket app. I looked around the forums and I see lots of good tutorials but it confuses me on how I backup with my stock rom before I begin any of the tutorials to upgrade to a new rom. I feel like backing up is the biggest step and don't want to mess this up so that I can revert back if I do make a mistake down the road. I'm sure once you do this a couple of times it starts to make sense but I have not done it yet and want to make sure I understand everything before I move forward.
I am a beginner but want to be able to get more out of my Gtab. Please help.
It needs to be modded right out of the box, so how much could you have possibly gotten installed?
Ok, I'm kidding.
What are you trying to "backup"? If it's DOC's and Books, music, etc, either dump it all onto a secondary memory card, or dump your data to a PC using usb connection. As for settings like email, etc. I say skip the backup and just reinstall the stuff.
I keep all of the working installers I've found on my external SD card so if I need to wipe & start over, I just go through and click/install them again.
bnovak said:
It needs to be modded right out of the box, so how much could you have possibly gotten installed?
Ok, I'm kidding.
What are you trying to "backup"? If it's DOC's and Books, music, etc, either dump it all onto a secondary memory card, or dump your data to a PC using usb connection. As for settings like email, etc. I say skip the backup and just reinstall the stuff.
I keep all of the working installers I've found on my external SD card so if I need to wipe & start over, I just go through and click/install them again.
Click to expand...
Click to collapse
Hi,
Thanks for the post. I think I may have not worded my question right. My fault since I am new. What I mean is what do I need to do to backup my current OS I suppose. For instance, it has android 2.2 correct? I upgraded OOTB to firmware 3588 which works well but no market. What do I need to do to back this OS up so that I can revert back to it in case of any problems? Sorry if I am still confusing you guys but like I said earlier, I am completely new and still learning the phraseology and such. Thanks!
jetguy35,
Most people get Titanium Backup and backup the apps and system with a batch file in that.
That takes care of apps.
If the whole tablet gets messed up you either NVFlash back to the bekit 1105 version
per the NVFlash recovery thread in developers, if its not too bad you reinstall the
current 3588 version from a download.
There are other ways some people suggest, but I don't recommend what I haven't used and don't know about.
Good Luck!!!
Rev
An app called Titanium Backup will allow you to back up your apps and their data.
To do a complete system backup, you'll need to get clockworkmod installed (bekit .8 version), once booted into clockworkmod there is a back up option which will back up all system files and apps.
Check this thread in the development section for installing clockworkmod:
[Sticky][Guide]Install ClockworkMod, A ROM, Flash Player, and the Market Fix
Insall clockwork mod .8 and boot to recovery and backup entire rom. ..then save a copy from internal to external sd card in case you need it.
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk
personally (and I was in your shoes last week)
I would just go through the TNT Lite post and flash that ROM onto the tablet. If you go TNT 4.4.0 you DO NOT WANT CLOCKWORK.
It's really simple - plug in USB, copy the correct files to the tablet, push and hold pwr-volume up and give it a couple minutes.
I think the vanilla ROM is floating around so if you don't have a bunch of personalized files, I wouldn't worry too much about it. Anytime you flash it, you are going to have to add some of the programs back in anyway.
Roebeets TnT build is super fast and super stable. You won't know what hit you when you turn it on the first time.
bnovak,
That's a good idea, but not everyone is ready, or has the expertise or even wants
to move up to a ROM.
I have two tablets and one is running the experimental next generation TwoTabX ROM
that is on hold waiting for VS to do something -- and the other most of the time is
pure stock (so I can test stuff and get OTA updates etc.
When I go to work, doesn't matter which I take because both work well.
Stock is not bad!!! You should have seen the original software!!!
Rev
I'm sure there is an article or thread somewhere that outlines things like what is stored to the 2gb miniSD, what goes on the 16gb, if there is a built in memory chip and what is on that.
If anybody can point to one, I would be very appreciative.
I'd also like a link to a definitive explanation of what happens during the different types of recoveries. What is the difference between using zip files and pkg files, for example. How come some zip updates only make small changes but others can completely rewrite the phone and brick it?
What does it take to do the equivalent of formatting your computer and starting completely over with a fresh phone? I mean cleaning everything out.
What is it about this phone that a full nandroid backup will successfully bring back the phone one day and fail miserably the next?
I want to really understand this phone, because I am not going back to a smaller screen so it looks like I'm stuck with it for a while because there just doesn't appear to be a mad rush of manufacturers releasing 5 inch phones.
mid_life_crisis said:
I'm sure there is an article or thread somewhere that outlines things like what is stored to the 2gb miniSD, what goes on the 16gb, if there is a built in memory chip and what is on that.
If anybody can point to one, I would be very appreciative.
I'd also like a link to a definitive explanation of what happens during the different types of recoveries. What is the difference between using zip files and pkg files, for example. How come some zip updates only make small changes but others can completely rewrite the phone and brick it?
What does it take to do the equivalent of formatting your computer and starting completely over with a fresh phone? I mean cleaning everything out.
What is it about this phone that a full nandroid backup will successfully bring back the phone one day and fail miserably the next?
I want to really understand this phone, because I am not going back to a smaller screen so it looks like I'm stuck with it for a while because there just doesn't appear to be a mad rush of manufacturers releasing 5 inch phones.
Click to expand...
Click to collapse
There are many out there, too many to list as a matter of fact... if you just use the Search function you will find all your answers. I hate to sound rude but this is just the type of thing the search is meant for. There are several guides that outline all you want to know, but I point them out to you, you won't be any the wiser by just clicking on them. The jargon you have to go through to get to the meat of your questions will teach you everything you need to know along the way.
I've tried searching. The problem is choosing words that get usable results without also getting a ton of useless ones to wade through.
mid_life_crisis said:
I'm sure there is an article or thread somewhere that outlines things like what is stored to the 2gb miniSD, what goes on the 16gb, if there is a built in memory chip and what is on that.
Click to expand...
Click to collapse
There is no single article where you can get all of this info. Best general resource is the XDA Wiki on the Streak.
For more info on the workings of the inner SD Card see this thread at MoDaCo.
mid_life_crisis said:
I'd also like a link to a definitive explanation of what happens during the different types of recoveries. What is the difference between using zip files and pkg files, for example. How come some zip updates only make small changes but others can completely rewrite the phone and brick it?
Click to expand...
Click to collapse
The stock recovery will install .pkg files (update.pkg or OTA upgrades). These are a full replacement for the software on your phone. When installing as an update.pkg file it is best to use the recovery for the version you are installing.
When installing an OTA update the recovery that preceded the one you are installing should work if your are 'upgrading' to a ROM from the same region, the checks that are done during an OTA update will prevent a phone from one region using an OTA update from another region. The advantage to using the OTA update process is that you retain your apps and settings. OTA updates are done by downloading the file to your phone and then tapping the DL notification in the notification bar.
A custom recovery (use StreakMod recovery) will write .zip files. These files can be a theme like a new notification bar or a ROM like StreakDroid or SimpleStreak. Custom recoveries are able to write a subset of the phones software. Most custom ROMS are not a full replacement for the the phones software, which is why they may include directions to flash a certain baseband or other additional files.
mid_life_crisis said:
What does it take to do the equivalent of formatting your computer and starting completely over with a fresh phone? I mean cleaning everything out.
Click to expand...
Click to collapse
Installing a stock rom with a stock recovery from recovery mode will do this. Since a stock ROM is the whole software package this will also make sure that the baseband and amss.nbn files are all in sync (same version). Doing this or a factory reset formats the internal SD Card.
mid_life_crisis said:
What is it about this phone that a full nandroid backup will successfully bring back the phone one day and fail miserably the next?
I want to really understand this phone, because I am not going back to a smaller screen so it looks like I'm stuck with it for a while because there just doesn't appear to be a mad rush of manufacturers releasing 5 inch phones.
Click to expand...
Click to collapse
I have never had a nandroid backup fail. I use StreakMod recovery.
If you check out the links in my signature you may find more answers.
Posts like that last make me really pissed off that I can only click "Thanks" once per post.
Modding your Streak - where to start expands on my answer posted here.
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
P.S. First post in any forum ever, just a humble android noob searching for knowledge and stable Roms from those who offer, sorry if I have posted this in the wrong place, obviously I have posted at the wrong time! A million thanks in advance to anyone with good news or advice!
DB73 said:
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
Click to expand...
Click to collapse
What is it you are looking for? I have copies of a lot of ROMs.
doogald said:
What is it you are looking for? I have copies of a lot of ROMs.
Click to expand...
Click to collapse
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
DB73 said:
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
Click to expand...
Click to collapse
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
There is another method very well documented here: http://androidforums.com/eris-all-things-root/127861-universal-eris-root-dummies.html (which also walks you through installing for your first custom ROM.)
I have some ROMs in my Dropbox if you can't find links.
xtrSENSE (stock 2.1 Eris ROM, rooted): https://dl.dropbox.com/u/220420/Eris/xtrSENSE/xtrSENSE5.0.1.zip
Workshed's GSB: https://www.dropbox.com/s/dvpuv4sbwmun43f/GSB.v4.5-final_ODEXED_CM7.2-Eris.zip
CondemnedSoul's CM7.2: https://www.dropbox.com/s/g1irvshpg7u7trr/CCM7_Eris_V24_RIP.zip
The last two are CyanogenMod Gingerbread ROMs. I think that GSB requires that you also flash Google apps in order to get the market. If so, you can get it from CyanogenMod here: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
(So, if you need to flash gapps, you go into Recovery. Wipe data/factory reset. Flash the ROM. Flash google apps. THEN restart the phone.)
doogald said:
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
Just realized why it wouldn't let me post, because of the links in my reply, :silly:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
4. Is there any way to get google play instead of market working on the Eris?
(((Thanks again for everything)))
XML Parsing Error: unexpected parser state
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.ja!/chrome/toolkit/content/global/netError.xhtml
Line Number 308, Column 50:
Click to expand...
Click to collapse
DB73 said:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
Click to expand...
Click to collapse
Try this one: http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
CondemnedSoul's includes the Google apps already and does not require a separate flash of the gapps zip file.
Ok, I just checked: GSB does NOT require google apps, either; they are already included. You can ignore that step.
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
Click to expand...
Click to collapse
Oh, good question. I would avoid it if you can. The Eris will insist that you activate. However, if you follow the prompt to activate and then press the disconnect button as soon as you hear it ring, it will try activation again two more times. If you disconnect after hearing the ring those two times as well, the phone will give up on activation and allow to continue with setup.
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
Click to expand...
Click to collapse
Not necessarily. In my experience, xtrSENSE is fastest, but the GB ROMs are just fine. You may not notice the difference. However, xtrSENSE has a method called cache2cache that frees up more storage space or user applications and data. If you install a lot of apps, xtrSENSE may give you more space.
That said, there are disadvantages, including missing out on apps that do not run on android 2.1.
There is something called xtrcache2cache that you can flash on the GB ROMs to give you the same sort of space. I'll try to find a link.w
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
Click to expand...
Click to collapse
I've never tried it, and I can't believe it runs with any sort of decent performance anyway.
4. Is there any way to get google play instead of market working on the Eris?
Click to expand...
Click to collapse
Not on android 2.1, but the two gingerbread ROMs will update the market to the play store.
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
The download link there seems to work.
Copy that file (xtrCMCache2cache.zip) to your SD card. This is only for the Gingerbread ROMs - it's not necessary for xtrSENSE.
Restart the phone to recovery. If you have already flashed one of those ROMs, simply flash that xtrCMCache2cache.zip file - do not wipe data or Dalvik cache first. Restart the phone, and you'll have probably about 20-30 MB more free storage space for apps and data.
If you have not already flashed GSB or CondemnedSoul's, do this:
- restart in Recovery
- wipe menu
- wipe data/factory reset
- main menu
- flash a zip file, and choose GSB or Condemned
- flash a zip file, and choose xtrCMCache2cache.zip
- restart the phone
doogald said:
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
OK, I will read what I have gathered one or two more times before taking the plunge. I am thinking of using the Jcase method, it seems pretty much idiot proof. I have the file and ROMs stored on my PC, and now on a CD as well, just so I don't loose them. If I have this right, I will:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think! On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options. I guess the latter is best, and use only a custom ROM for my son to play with. Hopefully I can temporarily disable or somehow limit su before giving it too him.
4. Do Nand backup of original official image, and put somewhere safe, like 2 places + on CD then remove from SD for more available space.
5. Flash one of the 3 downloaded ROMs and also xtrCMCache2cache if desired to desire-c
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Edit # 2 I downloaded a MD5 calculator and this is the output (F34FECFFB985553B68D66F6AC1EF27D3) for the erisone010.apk file
Another big thank you Doogald, If I have something wrong here, please, feel free to beat it into me now, before I do something stupid!
Click to expand...
Click to collapse
DB73 said:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
Click to expand...
Click to collapse
No, Your regular SD card is fine. You do need to enable third-party app installs; you'll find that setting in settings->applications.
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
Click to expand...
Click to collapse
Yes. You must restart the phone as if you wanted to make a phone call. Many people get too eager and try to get into Recovery before full restarting.
I can't believe that flashing Amon_RA is all terribly dangerous. There are ways to recover. In fact, I have not seen anybody report a brick after running the JCase 1-click. I'm sure that it will be fine.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
Click to expand...
Click to collapse
You *could* do the Nand Backup before running rootme.zip. Actually, you only really need to run rootme.zip if you want to do something with root with the stock Android you have now. Some people may, for example, install the application Titanium Backup Pro (which requires root) and batch backup all user apps (menu->batch and choose to run that option from the list) and then, after installing a new custom ROM, reinstall Titanium from the market/play store and then batch restore all missing apps and data. It's a very powerful way to get the phone running all of your apps and data without reinstalling from scratch.
That brings up one more thing: if you decide to install xtrSENSE, you do not need to do a factory reset if you want to keep all of your apps and data. Of course, if you want a fresh start you may, but xtrSENSE will keep all of your apps and data and give you a faster Eris with more room for apps and data.
Also, it *is* possible to get stock recovery back, though not without losing all of you data. There is a ROM called Flashback_21v2 that will bring back stock recovery and an unrooted Eris if you wish. The phone will act as if it was never rooted. You can find it here: http://forum.xda-developers.com/showthread.php?t=792026
That would be a good thing to keep on your phone, just in case. (Though I have to say that I am hosting the location of those files on my website and I have no plans to stop doing so, so they should be around for a while...) You'll probably be fine with the "no radio" version, but if you can spare the space on your computer, (that's a bit of a joke; the files are small), I'd download both.
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think!
Click to expand...
Click to collapse
In that case, you DEFINITELY want to wipe data, even with xtrSENSE!
On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options.
Click to expand...
Click to collapse
No, you can do both. Do a Nand Backup of the phone after you root it, which will be stored on the SD card. Wipe data/factory reset and you can installa ROM and then always go back into recover and Nand restore what you backed up originally to get your phone back as it was when you ran the backup. Familiar with Norton Ghost for Windows PCs? That's what Nand backup and restore does - it takes a full snapshot of your phone as it is, and when you restore, it's as if you had just turned off your phone for a long time - it's back to the way it was at the time you made the backup. You can have multiple backups stored - as many as will fit on the SD card.
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
Click to expand...
Click to collapse
Well... xtrSENSE support apps2sd as it is, and there are scripts to turn that functionality on. The GB ROMs support using the Android-native moving of apps to sd, so I would avoid apps2sd for them.
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Click to expand...
Click to collapse
The MD5 I have for 1click is f34fecffb985553b68d66f6ac1ef27d3
HOWEVER, can I suggest instead that you use the 1-click root here, prepared by Scary Alien: http://androidforums.com/eris-all-t...2-custom-recovery-trackball-not-required.html
If you look at the bottom of the first post, "Scenario 5", there is another version of 1click with a better version of Amon_RA (that allows you to use the hardware keys to navigate recovery, rather than just the trackball; sometimes the trackball doesn't work in the original Amon_RA). That version I guarantee is safe, and Scary Alien has the MD5 right there.
I am guessing multi-quote is what I should have tried on this instead of deleting?
OK, running 1 click directly from from SD card. Third-party apps ticked on before hand, check.
After running 1 click, do normal restart, then shutdown, then go into recovery via vol / end start up.
No bricks reported, that is very good news. Also good to hear that there may be a procedure for un-bricking in the unlikely event!
My Eris already has already has all apps removed, I tried to make it as clean and small as possible. Just looked at the xtrSENSE page and copied some tips, sounds nice and fast, liking that!
Awesome, I downloaded all 3 including Cupcake, in case I want to remember what that was like.
I did exactly that, downloaded both.
I will give this some extra thought before giving it to my son.
I have never used Norton Ghost, but I have used Macrium Reflect, Seagate Disk Wizard, Acronis etc. I get the image/snapshot thing. I plan to store backups in other locations, then copy back to SD if and when needed.
Just did some reading on the xtrSENSE page about aps2sd, guess I will do some more reading about native moving of apps to sd soon.
The MD5 I have matches yours. I downloaded MD5 Calculator and I guess it works.
After reading the page including "Scenario 5" I absolutely agree. I downloaded it, and will use the "scary alien" modded version with the added functionality. Thank you very much for pointing this out. Looks like no change in the simple execution besides the app/file to run, very nice!
Doogald, I can clearly see that you go out of your way to help others to say the least, I am sure its appreciated by more than just me, Thanks!
DB73 said:
I will give this some extra thought before giving it to my son.
Click to expand...
Click to collapse
Hey, one other thing: CondemnedSoul posted a script that you can run that disables the mobile radio, so you can make the device WiFi only. It's here: http://forum.xda-developers.com/showthread.php?t=1216571
I have to say that I have never tried it, but it seems from the replies in that thread that many have, successfully.
Jelly Bean build anyone?
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
foodude1 said:
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
Click to expand...
Click to collapse
Of course it isn't redundant, in fact this maintains the forum active, well a bit.
Here is the Jellybean Rom you requested, it is from MongooseHelix's build. It has a different Gapps package from what MongooseHelix actually established but I assume no issues may occur. :highfive:
https://copy.com/TgfFHxTqOHPJ