QPST .. no phone found - Mogul, XV6800 ROM Development

Ok, I installed WMDrivers and QPST, and when I put the phone in ##diag, it comes up on COM18. I go into QPST, add port (com18/Unknown, not DIAG label), and the port adds fine, but doesn't see the phone. I have searched around and can't find an answer.. any ideas?

Using the right one???
MetalHd said:
Ok, I installed WMDrivers and QPST, and when I put the phone in ##diag, it comes up on COM18. I go into QPST, add port (com18/Unknown, not DIAG label), and the port adds fine, but doesn't see the phone. I have searched around and can't find an answer.. any ideas?
Click to expand...
Click to collapse
I was having the same problems. be sure that you are using the WMdrivers and the QPST for the titan. I tried using the one for the 6700 and it would not read the phone. PM if you cannot locate it. I think I have it saved somewhere???

MetalHd said:
Ok, I installed WMDrivers and QPST, and when I put the phone in ##diag, it comes up on COM18. I go into QPST, add port (com18/Unknown, not DIAG label), and the port adds fine, but doesn't see the phone. I have searched around and can't find an answer.. any ideas?
Click to expand...
Click to collapse
The problem is in ROM version.
With DCD 3.2.5 QPST works, with 3.3.4 it does not.
I don't know if 3.2.6 is OK.

wanted to fix cellsouth banner w/3.2.6.. wouldn't stay that way would it from .5 to .6??

Once you fix the carrier banner, reflashing the rom should not mess it up again, it's caused by when you flash your radio the first time. Once QPST and EPST has been fixed, any future updates to radio or rom tho should not bother it.
I actually could never get QPST to work with any DCD 3.2.x rom, I always flash back to 3.1.2 make the change, and then flash back forward to his latest.
BTC

FIXED.
Ok, I tried the specific TITAN WM drivers, and still did not see the phone in QPST. So I did an SPB Backup, hit a stock 3.1.2, read fine, made changes, put back the same kitchen'ed rom I had to 3.2.6, and restored, and couldn't be happier.. unless of course USCC went 3G in my area so I had some bandwidth!
Thanks for your inputs!

MetalHd
So you are wil Cellular South? What are you running on your 6800? I want to upgrade mine but have been sceptical that it may not work on our network.
If possible I would like to know what steps you took; did you have to upgrade your radio prior to unlocking and upgrading?
Thanks
MetalHd said:
wanted to fix cellsouth banner w/3.2.6.. wouldn't stay that way would it from .5 to .6??
Click to expand...
Click to collapse

Nope, I am US Cellular on the coast of Maine. PPC 6800 with a dcd 3.2.6 kitchened rom. 25 megs free at fresh boot with one oxios. 16 gig microsdhc. Just had to change the CellSouth banner that is generated from the radio upgrade back to US Cellular. Seems odd to see US Cellular though, cuz I looked at CellSouth for 6 months before I fixed it.

MetalHd said:
Ok, I installed WMDrivers and QPST, and when I put the phone in ##diag, it comes up on COM18. I go into QPST, add port (com18/Unknown, not DIAG label), and the port adds fine, but doesn't see the phone. I have searched around and can't find an answer.. any ideas?
Click to expand...
Click to collapse
What is the version of your QPST

hello i have a htc touch pro of us cellular
and i ont know how to enable tha funtion ##3424# please help
thanks

Tried and Tried and Searched and Searched, and finally ive gotten to the point of giving up, figured i would take a week or so break and try this again. I have tried everything to get qpst working, i have the 6800 Titan (Qwest) Fully flashed to cricket, Im having issues with the Cricket Internet working on the phone, it keeps saying its not on my plan but i know it is. shows up on my bill and im paying for it.. Figured i could call and have them refresh the phone ( assuming the same thing that *228 does ), but the SPC isnt back to 000000 or 333333, its still the original one from Qwest (which i do have ), but somehow i need to get back to 6 0's so i can have cricket update the phone. pix mail works though, and i figure that uses the data connection so web should work as well correct?
Thanks in advance

what are you doing to try qpst? Are you putting the phone in dmrouter?

i am trying to get the SPC number, its not 000000 or 333333 so i cant get in and change the settings over to cricket. its driving me nuts, got a step by step tutorial on it? im about to lose my mind with this thing. the 6800 was no problem, but this one for some unknown reason i cant seem to get. this ones a qwest 6700

Related

ATT 8525 with a T-Mobile SIM - Sorry!

Appologize for posting the thread twice... I wasn't sure if this goes to the Hermes or the Herald forum...
Hello All,
I recently got an ATT 8525 and I'm trying to use it with my T-Mobile (US) SIM. I was able to successfully unlock the SIM and CID with an util/rom I found on this site (I think the post was from Pof). And I also re-flashed the phone with the latest ROM available.
But after about 5-10mins of usage the signal dies and when I reboot it says No GSM. Looks like the Radio ROM gets corrupted. I tried just re-flashing the Radio ROM and that doesn't help either. It works for short while and again the signal dies.
And also, I'm unable to install any of the generic ROMs (Fantastic Mobiz, PVET 40005) Although I'm connected to Active Sync when I run the Step 1 (ROMUpdateUtility_NV_G3.exe), I get a ERROR [222] : DEVICE NOT RESPONDING. And when I run the step 2 directly (update_rom.bat) I get an cannot update itsutils.dll maybe in use error.
As you can tell I've been messing with phone a lot for a couple of days with no luck and my frustration level is kinda high
As of now here’s where I stand. I re-flashed the phone (Image: 3.62, Radio 1.50) and it’s on the “Tap the screen to set up your windows based mobile device” screen. I plan on leaving it on this screen until I can a good solution.
I would like to get rid of the ATT ROM and install one of those hybrid generic ROM that is not Carrier specific. Any help will be much appreciated. Share your ideas, I’m very experimental 
Phone Details…
ATT 8525
HERM100
IPL: 1.04
SPL: 1.40.0 lipro
ok ur going all over the map here.. did u hardspl first? also pvet 40005 isnt a hermes rom.. um try hardspl first THEN flash to a new rom maybe once you successfully do that then try a new 3.62 rom.. i run austinsync buts its naked..just like i like my women. ha. but if ur looking for a full blown try fun_key's rom or blinkys.. these arent carrier dependent
hey man jakeypoo, Thanks for your reply. I kinda figured that I was all over the map.
Okay first appologize my ignorance. What is a HardSPL? I did a search on this forum and I found Hard-SPL-V7.zip. Is this a good version to use? Also when I run the exe, All options are grayed out except for "Force Using SSPL" and "Is it Hard-SPL". What do I select.
Thanks!
Hardspl v7 is the latest version out there, its the one for you to use so that you're safe from future mishaps.
I also have an 8525 on T-mobile... so no worries.
Hope this helps.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
still problems (no gsm)
Thanks whistler4ever. That link was really a great help.
Here's what I did...
1. Installed the Hard SPL version 6
2. Installed the latest ATT ROM (ver 3.62 radio: 1.54) I had to do this because the radio on the phone was corrupt (says "no GSM" on the start screen) and couldn't install just the radio rom. kept giving connection errors.
3. Installed Schap's WM6 Pro 3.57 hoping this would get ride of the ATT ROM and my intial problem (no GSM) will go away.
Everything was fine for like 15 mins, then my phone just froze. I reboot the phone and sure enough the radio ROM was gone (no gsm). ;(
Running out of ideas.
1. Could this problem be because I'm using a TMobile SIM on a ATT's radio ROM?
2. Is the radio ROM specific to the phone type and provider(ATT, TMO..)? Is there a generic WM 6 radio rom? If yes, where can I find the latest version?
3. Any bright ideas?
Thanks again!
Current phone details...
ATT 8525
HERM100
IPL: 1.04
SPL: 2.10
ROM 3.62
Radio: no gsm
I was able to flash just the radio ROM - version 1.51. But again after a few hours the Radio got currupted. I also tried to follow the instruction ( http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 ) to use the mtty.exe utility, but I don't get a USB prompt. I get Cmd prompt and if I still enter the password, it says invalid password. please help!!!
And how do I do the USB monitor capture? I could post more details that way. I'm using my girl friend's old razr now and it's painful!
I have used my t-mobile sim on AT&T rom's and other roms with no problem. I would try going back to a factory rom and then changing back to a cooked rom just to confirm its all a clean install. also, try downgrading your radio to a 1.47 or 1.48 (those have been proved pretty reliable across many cell providers).
Thanks Whistler. I'm going to start with the 1.48 version and if that doesn't work I'll try the 1.47 version. Not giving up on this.
I found 1.47 to work very well with t-mobile even when traveling...
Thanks Galaxys. I just installed the 1.47 radio. I have fully signal and the 'E', but I can't receive or make calls.
It almost looks like my TMO SIM is not compatible with the 8525. It always works for the first few minutes after an install and then stops working.
I'm very certain the phone is in good condition.
Should I try an older radio version.. like a 1.24 or something ?
Can I install just the tmobile radio rom?
I'm also going to install TNT 2.0 pro so I have the exact same set up as you and see if that makes a difference.
no luck!!!
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
try the way i posted in this thread http://forum.xda-developers.com/showthread.php?t=337125
ajjus said:
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
Click to expand...
Click to collapse
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Try to flash the entire UK T-Mobile ROM, then remove the internet settings and install the correct CAB for T-Mobile.
UK ROM here: http://forum.xda-developers.com/showthread.php?t=337163
PROVIDER SETTINGS CAB: http://forum.xda-developers.com/showthread.php?t=311446
a-h-t1, Junner2003 and galaxys - I'll try all your suggestions.
a-h-t1 - The first 2 steps went through fine. While I install the radio ROM as part of step 3, the installation doesn't go past 0%
I'm going try Junner2003 idea now. I'll keep everyone posted on my progress.
install stops at 11%
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
galaxys said:
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Click to expand...
Click to collapse
Hi Galaxys,
I don't think the IMEI is blocked. Or maybe it is, how do I find out? I don't have any of the symptons listed on the link you sent (don't hear the beeps or anything).
I originally had a T-Mobile wing. The LCD screen cracked (don't know how). And ofcourse TMo won't replace it.
http://forum.xda-developers.com/showthread.php?t=335346
I got 8525 from my company. It's almost new. Only used for a day on an AT&T SIM. This phone is free, and so I really don't have much to lose... so all out experimenting
Tried insalling from the micro card, even that stops while installing GSM. pissed!!! Why would the darn Radio not update???
this may sound stupid but if all else fails, why not...
my mda use to have signal then it would just disappear as well after 15 min or less..
turns out the sim card wasnt pressed in properly.. so i just put a piece of paper on top of the sim card to make it thicker and get the battery to press it down harder. and it solved all my problems...
just a suggestion..good luck
ajjus said:
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
Click to expand...
Click to collapse
See this post here for a possible reason (and technical explanation/theory) for your device stalling during radio update. The fix suggestions at the bottom of the page may help you - in particular :
Try cooling the device down a bit before flashing as the PIC chip (where your radio ROM is held) may flash more reliably/easier when cool. Don't ask why - that's from it's datasheet ;-)
The paper on the SIM card is a good idea too to rule out dodgy SIM connection - Great idea r0mmel

Bell Mobility HTC6800 + DCD 3.0.0

Can anyone share their experience upgrading their Bell HTC6800 ROM (including radio, unlocking SPL, and upgrading PRL) with DCD 3.0.1? I have never done it before but curious to hear if anyone has had success or failure.
I noticed that DCD released a Bell ROM in his 2.3.2 kitchen but not in his 3.0.0 kitchen. Does anyone know how to port the correct Bell settings into the 3.0.0 release?
My main reason for upgrading is of course better performance but more importantly I am curious about aGPS and how I can use it instead of my Bluetooth GPS receiver. If anyone can share that would be much appreciated.
http://rapidshare.com/files/99219142/DCD_3.0.1_Bell.exe
Check the last page of this thread
http://forum.xda-developers.com/showthread.php?t=363693
Thanks origins81. I noticed now that DCD added the Bell ROM to his 3.0.1. So can you share you experience with this ROM upgrade? Did you have any problems (I assume you've done this before)? Can you share your experience if you are a Bell HTC 6800 user?
1. If you have not already done so, run the 2.40-olipro unlocker. Your device will again be left in tri-color screen.
2. Flash the official sprint 3.35 update.
3. When the device boots for the first time, do not pass screen calibration. Flash a 3.x.x ROM. (that being the custom rom of your choice)
Think I only used the official Bell rom for about a day before i got sick and tired of it and flashed to one of DCD's clean roms, never looked back since then...
As much as I hate Bell, I purchased this phone, had it for about 7 months and got into flashing roms, well, this newest ROM from DCD was the trickiest. First I tried using the Kitchen (disaster), I finally got it to work, installed it, and I kinda forgot to read the instructions, you have to be SURE to install the Olipro 2.40 first, and flash to the new radio, or it will do one of two things. 1st it will either continuously restart or 2nd thing is it will get stuck on the infamous red, blue, and green screen. However if you do get stuck on this, you can flash the rom again, then install the newest radio and it *should work.
But after all that pain and misery, I got a little better signal (I'm not too sure if this is caused by the new rom or not), the GPS works great as always, and seeing as Bell charges 2 arms and your first child for data, I haven't tried the speeds for Rev. A.
P.S- If you ever need help with your Bell 6800, just ask, I've been troubleshooting the same phone for a couple months, and I know how to use a kitchen, just a PM away.
Thanks guys. You have instilled more confidence in me now. I am just going to make sure I have the original stock ROM from ustar as well as the Titan re-locker just in case (I want a backout plan). I will wait a little longer until everyone irons out the kinks of this new 3.35 radio and I will give the latest DCD ROM a try. Thanks again!
I've used the SPRINT update and it works fine. I've added the quick GPS program that comes with the DCD version and I am going to change the startup logos from Sprint to Bell...(As soon as I figure out how). I didn't need to reprogram anything!!
I just got my phone today, gonna give this a shot...
oh man... i ran the olipro 2.4 file and it took me to the tri color mode and then tried to flash it with the latest sprint update. it went up to 4-5% and then it showed an error of Update Utility. i tried to go bak to the Bell update and it did the samething but this time after 1%. can someone please help me out here? I'm with bell.
ok now i'm stuck at the bell screen and at the bottom it says "No Radio" cuz i tried flashing the dcd file.
Well, to begin with, here are the steps I took to accomplish what I have.
1. Flash Olipro 2.40
2. Flash Radio to 3.35 (For the newest version of DCD's rom)
3. Flash the ROM to DCD's rom.
Now, the first time I did this, I got stuck at the tri-color screen, such a pain. I then tried flashing the rom again, and it rebooted continuously and I had no idea why. This was because I didn't flash to the newest radio. So I did that, and it worked, so try those steps, and good luck.
On problem that I did notice is that my phone always has the roaming triangle on?? Hopefully it's not costing me roaming charges... I was going to try and use the DCD 3.0.1 rom but don't want to chance it. I'm going to try playing with it some more an see what happens.
I'm running DCD 3.0.1 on my Bell 6800 and it's working great so far (day 2)
Follow Origins81's install points above, and remain calm if it takes a try or two to get past the 2.40-olipro unlocker 3-color screen step.
I'm having some issues ActiveSync'ing to both work and home PCs, but I don't think it's related to this ROM.
GPS works great with Google Maps
The alarm clock bug is fixed (e.g. not working when plugged in)
Got it working and everyhthing is great except is doesnt play video in the media player...Working on it.
Well for some reason I can't seem to activate my phone. I hit Talk then I enter ##911224#. It tries to connect for 15 secs then hangs up.
I _thought_ I did everything properly.
1) Ran Olipro2.40 (actually it was the unlock from http://www.phonenews.com/how-to-add-gps-to-htc-mogul-xv6800-p4000-titan-2663/) it looks like it's got Olipro2.40 in it.
2) ran official upgrade from sprint (RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship.exe)
3) Extracted DCD_3.0.1_Bell.exe and ran the RUU.
hope I didn't perma-brick it.
M
Ok fixed it. Browsed around the and found out in a Howard forum that you have to type ##111111# (doh!) before. Ok my heart can start beating again! Posted for posterity. The code that I used must have been for a different area. This phone is from the GTA.
can you give me a link to those howard forum posts because i ran into a problem ... after a last flash my phone works but its not activated... I tryied ##111111# but i get a code check error... ##911224# doesnt do anything... ##778# works but 000000 code doesnt so i cant get in... HELP
Roaming After Update
After suffering with the pesky Bluetooth issues with my HTC, I thought I'd do some searching on the Internet to see if others had the same issues. Lo and behold, it looks like a real bug with the HTC. After reading some forums, it looked like the latest Sprint release would cure the problem. I downloaded an unlock program ("Hard-SPL-MFG") and the Spring update (RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship)
and proceeded to update my HTC.
After a few unsuccessful attempts (stuck at the three color bars a couple of times, restarting a few times on it's own) I managed to get the unlock code and Sprint update installed.
The problem I have now is that it appears that I am now roaming even though I'm in my calling area (I'm with Bell Canada)!
Help! What should I do??
Check the bottom link out, had similar issues when I first flashed. If you have any further questions let me know
http://forum.xda-developers.com/showthread.php?t=363693&highlight=FOR+BELL
i follow the step, but when the phone restart, i stuck a the bell screen...
i'm unable to connect with the usb.
Can you able to help me ? to complete the installation or trying to go back OEM
- i do the first step; see the red, green, blue screen (http://forum.ppcgeeks.com/showthread.php?t=9093)
- flash the rom
- now stuck......
thx for your precious help
TwistedWaffle said:
As much as I hate Bell, I purchased this phone, had it for about 7 months and got into flashing roms, well, this newest ROM from DCD was the trickiest. First I tried using the Kitchen (disaster), I finally got it to work, installed it, and I kinda forgot to read the instructions, you have to be SURE to install the Olipro 2.40 first, and flash to the new radio, or it will do one of two things. 1st it will either continuously restart or 2nd thing is it will get stuck on the infamous red, blue, and green screen. However if you do get stuck on this, you can flash the rom again, then install the newest radio and it *should work.
But after all that pain and misery, I got a little better signal (I'm not too sure if this is caused by the new rom or not), the GPS works great as always, and seeing as Bell charges 2 arms and your first child for data, I haven't tried the speeds for Rev. A.
P.S- If you ever need help with your Bell 6800, just ask, I've been troubleshooting the same phone for a couple months, and I know how to use a kitchen, just a PM away.
Click to expand...
Click to collapse
Hi TwistedWaffle, Are you from the montreal region? I am looking for somebody who would do this stuff for me... Can you help?

Brand new Alltel Titan - verifying upgrade procedure

I just know I am about to brick this thing and kill myself, but here is my understanding:
1. Use latest Olipro unlocker (2.40);
2. Use PPCKitchen to build WM6.1 and GPS ROM with the modules/etc. that I want - choose Alltel in the service provider dropdown box in the top right hand corner.
3. Build the ROM and choose the "upload rom to device" option.
I am sure this is already wrong, but here are my other questions:
None of the special code entries work. Things like ##<msl>#, ##778#, etc., so I can't find all my data settings and MSID. The information I have read says to enter these codes and nothing more. When I enter them, I am just staring at my dialer screen with that code typed in and nothing happens. Pressing send does nothing but try and call that number and there isn't an "Edit" or "View" button to press or anything of that sort. I can't find a walkthrough on how to enter those codes.
I just would love a lean install of wm6.1 with GPS enabled and some of the popular mods that will work with Alltel. I haven't found any good walkthroughs for Alltel users here or at PPCGeeks.
If anyone has any advice for a way to do this safely, let me know. You could even message me on AIM at Lucificate if I could pick your brain a bit. If this doesn't start making a whole lot more sense real quick, I will just learn to live with the default software my phone came with until HTC releases an official Alltel upgrade with 6.1 and GPS =)
First off to get to the settings its
##778 Talk.
then 000000 <6 zeros is the code
then yes looks like you have an idea..
Good luck.
Brad
Having same problem with Sprint Mogul using DCD rom with verizon settings. With the new rom the ## msl # comman does nothing. I reverted back to the unofficial sprint rom and it works again. The DCD rom looks much better, anybody got any ideas?
I'm on Verizon and my codes haven't worked for a long long time. The simplest thing is to go into your windows folder find the file called epst.ink and copy it to your start menu/program folder. Then whenever you need inot those setting you just go to your programs and select it.
Lucificate said:
I just know I am about to brick this thing and kill myself, but here is my understanding:
1. Use latest Olipro unlocker (2.40);
2. Use PPCKitchen to build WM6.1 and GPS ROM with the modules/etc. that I want - choose Alltel in the service provider dropdown box in the top right hand corner.
3. Build the ROM and choose the "upload rom to device" option.
I am sure this is already wrong, but here are my other questions:
None of the special code entries work. Things like ##<msl>#, ##778#, etc., so I can't find all my data settings and MSID. The information I have read says to enter these codes and nothing more. When I enter them, I am just staring at my dialer screen with that code typed in and nothing happens. Pressing send does nothing but try and call that number and there isn't an "Edit" or "View" button to press or anything of that sort. I can't find a walkthrough on how to enter those codes.
I just would love a lean install of wm6.1 with GPS enabled and some of the popular mods that will work with Alltel. I haven't found any good walkthroughs for Alltel users here or at PPCGeeks.
If anyone has any advice for a way to do this safely, let me know. You could even message me on AIM at Lucificate if I could pick your brain a bit. If this doesn't start making a whole lot more sense real quick, I will just learn to live with the default software my phone came with until HTC releases an official Alltel upgrade with 6.1 and GPS =)
Click to expand...
Click to collapse
You also need the updated GPS radio to run a GPS rom!
blueglide said:
You also need the updated GPS radio to run a GPS rom!
Click to expand...
Click to collapse
At what point do you insert this step? I thought the kitchen included all the components for he flash. All I have found is some Sprint radio upgrade, not sure if I can just throw that onto the Alltel phone.
You can get the code using a program called getspc (search xda forums for it).
just after you install olipro 2.4, you flash to the sprint 3.35 (this will install the new radio) rom but do not allow the device to configure (do not tap screen when it asks you to), then immediately flash to dcd's rom.
I have a qwest mogul and using this procedure preserved all the information on the phone for Qwest (I didn't have to use the information I copied), but be sure to write them down just in case. Also, you may want to find the exit bootloader program, just in case your phone gets stuck in bootloader mode (I needed it).
Lucificate said:
At what point do you insert this step? I thought the kitchen included all the components for he flash. All I have found is some Sprint radio upgrade, not sure if I can just throw that onto the Alltel phone.
Click to expand...
Click to collapse
Unless something has changed the kitchen does not include the radio. The safest way to get the radio installed is to flash the Sprint rom but don't allow the customizations to run unless you're a Sprint customer. Then you flash your custom rom for the specific carrier you're on. I'm on Alltel also and the Sprint rom will work fine to get the radio installed.
Be forewarned, though, that once you upgrade to the 3.35 radio, it might be tricky to flash to the stock Alltel rom once it is available. Some have had success relocking then reflashing and some have bricked multiple phones in the process. Apparently, downgrading a radio is much more taxing on the phone than upgrading the radio.
Speaking of Alltel, anyone get MMS working on DCD 3.0.4?
billcohen said:
Speaking of Alltel, anyone get MMS working on DCD 3.0.4?
Click to expand...
Click to collapse
I have gotten mms working in 3.0.4 by cooking rom without new arsoft and using lennys cab instead....bummed for not having the new arsoft but it still works
link below
http://www.lennysh.com/forums/showthread.php?t=2

noob goofed and has no internet

here's whats up... first of all... I want to thank everyone here for their amazing info and files. these last few days have been a real eye opener for me to look and learn new things. that being said....
I have a uscc 6800. I upgraded to nue spl 2.47 then to radio 3.42.5 then went to dcd 3.3.4 as i had read it was stable and opperating well. I think thats where i goofed. I allowed it to set up its own settings then I ran the uscc carrier cab.
I have no internet. my #777 says I need a valad password and username but had never had one before. my fiance's phone doesnt need one... (I'm not touching hers at this point in time)
any thing... any help.... any hints tips etc. PLZ
ok. i think i get it now.
here is the biggest issue I have.... I have checked epst and it appears to all be the same. was there some step I missed... is there some fix I'm not finding or am I just screwed?
With USCC I have always found it best to use QPST to backup and restore the phone's programming before/after flashing. Then there is only 1 thing that has to be edited in EPST when it's all said and done.
What kind of phone is your GF's? The same model?
If so you can use QPST to read her phone's programming and update the MSID/Phone # info and write it to your phone and it should work.
QPST info is not the same as EPST info, they do have some cross over but both also contain unique info and when you upgrade to a v3.x radio, it trashed alot of the settings in QPST, which is why it's best to back it up first.
BTC
This sounds like something I've done in the past, but not with USCC. I had flashed a dcd ROM and then installed a carrier cab, but it continued to ask for a valid username or password. There are a couple of things you can do. First, do a hard reset of the device, then install your carrier cab. AS SOON AS installation completes, soft reset the device. If your connection is still not working, go to Settings>Connections>Connections and try to configure or set up a new modem connection. You will have to enter in the username and password for USCC internet. This information can easily be found in EPST also.
thanks for the help guys
I appreciate every thing u guys suggested but had failed to report back that I had fixed it... infact my gf's phone was the same and I did go back and compare the two epst's and had found that a 2 had changed to a 1. changed that back and got my svcs back. I have however been looking for the qpst that everyone is speaking of but am at a loss as to where it is... any help?
QPST is available on the internets, somewhere. Do a Google search, I doubt it'd be safe for anyone to actually post that file on here. But you'll need to put the device in diagnostics mode to use QPST and also will need the modem drivers.
I'm sure if you search the XDA forums you'll find something

Problems changing my number

I have been having problems changing my number on my phone. I am using DCD 3.3.4 and radio 3.42.50. I can not access the page where i can change my number on the phone. I have the number changed on the bell network. When ever i put the code in, ##564848#, the phone starts dialing. If i do ##564848 then it tried to load EPST and closes. I talked to bell IT and they gave me a link to get the factory bell settings rom.
http://www.pcdphones.com/phone_downloads.aspx?bid=76&cid=16&mid=298&carrier=Bell Mobility
I am using the new boot loader 2.47no2chem i believe. If i try to load the rom, will i run into problems? Does anyone know of a better way to change my number? Thanks for any help in advance.
Cheers,
Andrew
AMC_CAN said:
I have been having problems changing my number on my phone. I am using DCD 3.3.4 and radio 3.42.50. I can not access the page where i can change my number on the phone. I have the number changed on the bell network. When ever i put the code in, ##564848#, the phone starts dialing. If i do ##564848 then it tried to load EPST and closes. I talked to bell IT and they gave me a link to get the factory bell settings rom.
http://www.pcdphones.com/phone_downloads.aspx?bid=76&cid=16&mid=298&carrier=Bell Mobility
I am using the new boot loader 2.47no2chem i believe. If i try to load the rom, will i run into problems? Does anyone know of a better way to change my number? Thanks for any help in advance.
Cheers,
Andrew
Click to expand...
Click to collapse
I was just talking about something similar over at geeks.
#codes do not work with some of the dialers.
Do not know if it will work, but find a dialer cab to install and retry. Worth a shot anyway.
I know this one has worked for me. http://forum.xda-developers.com/showthread.php?t=429179
Thanks for the link, ill try it out. They say to uninstall the previous cab how do you do that?
I also been reading around that i need to install a cdma dialer cab, and this might be the problem why i cant get into the EPST page. If anyone has any more ideas let me know.
I installed another dialer cab with no luck. I installed the cab from the link mattsm posted above with no luck. It tries to load the page and then closes. I was thinking, I installed a DCD 3.3.4 rom but was that rom intended for GSM phones or cdma? I think the settings page was removed from the rom. If anyone has any ideas please let me know. I want to install the rom from bell to get factory settings but i have a new boot loader, so will this be a problem? Thanks in advance
Cheers
The only other thing I think you could try is qpst.
It lets you edit the epst settings from your pc.
you will need the qpst program, htc drivers
google the qpst and I will post some drivers you need in this post with an edit.
after you get the drivers intalled and qpst on your pc, You will enter ##3424# on you phone and hook up your usb to phone and it will install the drivers. Let me find the link to qpst help and I will post it as well. I am sorry right now I am busy but will post these before I leave.
You can try my Diagnostic Shortcut CAB located in my HTC unlock directory, you dont even have to soft reset the shortcuts show up in programs/diagnostic folder.
There is also HTC windows drivers, Active sync 4.5, QPST 2.7 build 3.01 works perfect with TITAN, and many other tools. Plus instructions.
http://www.4shared.com/dir/13899878/aef6ea49/HTC_to_Windows_Drivers__Unlock_Tools.html
Start from ground up EPST change your number, MIN, anything you have to change to switch phone numbers. Then double check using PST and correct any settings. Let me know if you still have problems accessing PST with codes or shortcut. I will make you a Bell CAB that will fix your programming codes.
Enjoy!
Thanks alot for the help. I have to head to class right now but i will be back later today and try it out. When you say drivers, which drivers are you referring too? the drivers for my phone on vista? If you post some steps, i would greatly appreciate it. Thanks again.
RyanMogul6800 said:
You can try my Diagnostic Shortcut CAB located in my HTC unlock directory, you dont even have to soft reset the shortcuts show up in programs/diagnostic folder.
There is also HTC windows drivers, Active sync 4.5, QPST 2.7 build 3.01 works perfect with TITAN, and many other tools. Plus instructions.
http://www.4shared.com/dir/13899878/aef6ea49/HTC_to_Windows_Drivers__Unlock_Tools.html
Start from ground up EPST change your number, MIN, anything you have to change to switch phone numbers. Then double check using PST and correct any settings. Let me know if you still have problems accessing PST with codes or shortcut. I will make you a Bell CAB that will fix your programming codes.
Enjoy!
Click to expand...
Click to collapse
thanks, He has the link. Got to go will check back later. Good Luck.
Yes the HTC windows drivers get installed on your PC. Then QPST, then put the phone in Diag Mode, then plug it in with active sync usb connections disabled, then access Service Programming using QPST. The instructions (SPCunlockinstructions.txt) are on my share site, they will at least get you into Service Programming the rest is up to you.
Another thing I found is to disable driver signing in Vista press F8 while booting up and disable driver signing. Also if you do a search on XDA for HTC vista drivers you will find a thread with some drivers and information you can try.
Thanks alot RyanMogul6800. I have downloaded most of the files that you have mentioned. I can't try them out until monday, but ill give them a shot for sure. Thanks again. The Bell cab you mentioned, is that the problem? I can't seem to understand why in the dialer it tries to load the page and then closes as if it was missing. Let me know what you think.
Cheers,
Andrew
Thanks alot Ryan. I used the program and I changed my number with the qpst. It works now!!!
Cheers,
Andrew

Categories

Resources