Related
i tried to install another rom, Hermes_WM6_WWE_vp3G_v3[1].61.0_ATT_Full.rar and Touch_I_interface_beta.zip and crashed. and now, i enter in bootloader, if i want to make super cid it tells me to connect the pda even if is connected. and if i try to install other roms is stuck on 0%
try this http://forum.xda-developers.com/showthread.php?t=295735
next time use find function first!
greetz kirkdis
thank you. 10x
Hermes died? Buy a Kaiser..much better
sorry, but didn't worked. exactly like update rom, error 262.
Bram87 said:
Hermes died? Buy a Kaiser..much better
Click to expand...
Click to collapse
to buy a kaiser i have to have money, and I don't have them. I want to make this working, 'cause i've payed a lots of money for me
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
ady_uaic said:
sorry, but didn't worked. exactly like update rom, error 262.
Click to expand...
Click to collapse
Give more detail about your device, SPL? Radio version? Custom RUU version that you use?
i can't give you more that SPL 2.03 because the rest (RUU, radio) doesn't work. I can't enter in my device (i tried several custom RUU, still nothing, remaing stucked on 0%)
my first SPL was 1.03 but after a try of upgrading ROM it was modifed in 2.03 and i think this is the problem. does anyone knows how to modify it?
how can i downgrade my SPL ?
A quick fix
I am willing to take your bricked hermes off your hands for $40 US. I know, I am too kind.
i'm thinking that his big problem is at radio sigurance. what can i do?
his problem is on radio. when i'm flashing, on radio is stopping.
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
hamed_ppc said:
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
Click to expand...
Click to collapse
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
eraserbabyboy said:
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
Click to expand...
Click to collapse
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
hamed_ppc said:
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
Click to expand...
Click to collapse
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
eraserbabyboy said:
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
Click to expand...
Click to collapse
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
hamed_ppc said:
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
Click to expand...
Click to collapse
I don't know. In my country I have a htc services and they say to me that my motherboard must be replaced because is to hard to change only radio chip and they only change all motherboard. For 350 Eur(+some Eur) I can by new Tytn. Now I use my pda in my home (in toalet) via wireles to look internet. Work's fine, but sometimes freeze OS and I must do soft reset.
ok guys , i might found a temp solution or maybe it will work permenantely with some one , but i need some one who have spare time and steel nerves coz i'm sick and tired of trying many files and roms and radios .
so any one is willing to start this experiment with his hermes and his spare-time lets begin .
first of all i want to declare that this method revived my radio and i used my device for one day just fine receiving and making calls . then the next day i decided to make a hard reset to see if the radio will stay working , and the result was the radio was dead .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
feedback
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
a-h-t1,
thx for your discription,I'll try your method as soon as i can(because ADSL isn't much available!!)
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???[/QUOTE]
Hamed I dont know what's happened with my hermes, because I get him with the no gsm error. I have a bootloader 1.09 with enable kitl mode. In PB I lose many, many night to boot os but without sucess. And post many question here, but without answer, a-h-t1 is the first men who try to help and meny 10x for that.
So, before 2 week I send my hermes to Imei-check and before few days I get it back with bootloader 1.01 mfg and instruction from imei teamroblem_Description: The radio chip is faulty 100%. Now the handset is usable as PDA only (wifi + bluetooth working too), but not as a phone (the GSM module refuse to answer/flash).
DO NOT attempt to upgrade the firmware in the phone with a firmware which has RADIO upgrade, as it will put the handset back to the brick mode!!!
Model is SVP3100.[/COLOR][/COLOR]
After that I put the SPL 2.30 Olipro to prevent any future damage, and continuing to "play" and experiment, because I don't have more than, to loose. I have P3300 who work's very nice....
It's possible to boot any OS without radio. (I use nbh tool 1.01 to extract nbh file to nb and after make Ruu_signed but without radio).Also try metod via SD card and same to you, stop when try to flash radio. Also it's happened on 12-13%(independed of the rom version) when start full RUU upgrade. And when try to flashing only radio they stop on 0%. On 12-13% ruu upgrade try to flash radio in this moment, and this is the end. I am not sure is this hardware problems, but imei (I dont belived too much) said YES. In win OS I don't have a imei identification (in device info/identity) and of course radio version is blank. Sometimes happened that os blocked(freeze) or device just totaly go to power off mode and I must to do soft reset. Is any way to totaly disabled phone function in registry? I mean that freeze when phone try to find network or sim, but I am not shure. Last night I open my devices, and get out motherboard, just to see this famously radio chip. It's not possible in "home made" to change yourself this chip. Only if I have a more lucky and found some broken hermes with ok motherboard for 100-150 eur...
I hope that my info just little help to you to know "mystery" about our problems.
And one more time 10x to a-h-t1!
eraserbabyboy said:
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
Click to expand...
Click to collapse
I just tried it and same result like you
but many thx for a-h-t1 and eraserbabyboy's help.now I want to try fix it in hardware way!!
but if anyone has idea about our problem please say here.i think it's going to be common problem,because i see many people in xda who has the same problem.
Read this, to see how I solve my problem. But I still have a hope, that it's not hardware problem and in the future I hope that someone will found software key to solve our corrupted radio.
http://forum.xda-developers.com/showthread.php?t=338413
ok,i think it was almost three months ago that i had posted my last post!!
you know my problem and i feel it has became a common problem for poeple who have hermes,unfortunately.
last week,i found a service man who believed that my phone's problem is fixable.
so i gave my pda to him,and because he lives in another city,i returned to mine and waited for him.
yesterday i phoned him,and this is what he said to me:
"first,I tried software methods,but the result was nothing!then I disassembled the device and changed the piece of RF of your ppc.it hung first,but now it loads the windows and find the antenna too!!but immediatly after finding,it hangs."
he has used the Dopod's RF in my htc TyTN and thinks that this problem(hanging after finding the antenna) is because of not matched radiorom.
I have good feel about his say,and i'm trying to help him find the correct radio rom,because he is so busy and cant search the internet to find the radiorom.so I've mailed him the link of wiki's radio rom for hermes and I hope someday this tragedy will finish but i'm not sure.
if anyone have comment about this case please help us,specialy about the RF,because I don't know anything about the Radio Frequency.
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
1a
Its called a 1a brick. Look in the sticky brick section. like 170+ pages of this issue. I believe I have the same device. No GSM/ no imei no radio. Can flash rom's all day long, as long as rom doesnt include GSM. Try to flash ANY GSM does nothing, let it sit 10hrs... Nice free PDA, till i can figure out the wiki & there must be hope for me. Till then my wiz100 keeps rocking. Like the 8525, but wanted it more as a phone then just pda.
nicknowsky said:
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
Click to expand...
Click to collapse
I hope you will fix your device,but when I read about your solution,I felt that guy who brought back to life your device,has just used a ROM whitout GSM,the way that we have been using since months ago.if I'm in mistake so tell us more.
The end of the Tragedy
o0o0k!!
as I've said in my post,the service man that I love! replaced the RF of my pda,but new problem was hanging after finding the antena!!
as he told me yesterday,he tried another used RF,but this time the TyTN's one and it worked) and there is no problem.so after 4 months nearly I can use my pda.
as soon as I can,I will go to get my device and test it myself.
be wait for my smooth experience!!
What is this???
replaced the RF of my pda
Andrey_ORIN said:
What is this???
replaced the RF of my pda
Click to expand...
Click to collapse
its full name is RFSP=Radio Frequency Signal Processor.it's one of ICs on your Hermes mainboard.it needs a professional to replace.I'll explain more early.
but if you have same problem and have tried all of the the wiki methods then you can test my solution.
Helo everyone, im currently in limbo about what to do..
i've been using the official HTC WM6 rom on my 8525 with radio v1.40 i think.. i've been loosing signal 2 to times daily. I upgraded to Radio 1.57, everything worked much better then 48 hours later the radio went dead.
i've been using 2 different WinXP PCs but both have the same results so im sure its not the OS..
I've been reinstalling different OS without any problems but always reports NO GSM, i've tried running SSPL-HERM from within WM6 and run the flash from the radio 1.54.07.00 firmware here on XDA-Dev but still 0% progress on the "updating the rom".. error 262 update error..
The phone is using HRM100 IPL-1.04 SPL-2.10.Olipro
Could it be:
A - bad block? if yes, how do i fix it?
B - phone is bricked?
C - damaged radio (physical hardware)
Any help would be great!
I have EXACTLY the same problem....! Now I am worried that I'll get busted on the Warantee rap despite it being the offical T-Mobile release for WM6 for HERM300! Mine stopped working after 12 hours. I have a HERM300 and cannot flash the Radio back. Be careful... I think it's a bad block or something permanent. Trying to flash it back to WM5 and send it back for repair bit it's not looking so good at the moment. Will help you if / when I can.
Seems like all radio's starting to break
I didn't even flash mine and it is broken, can flash everything except for the radio part.
now using it like a normal PDA, using internet through bluetooth with my old phone.
Just 10 months to go before I can get a new phone, I don't think it will be HTC again, never got support from them, only from this website.
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
indie said:
i found the best way to flash is by using the sd card method, I always use this method to flash my vario II
Click to expand...
Click to collapse
tried it, but freezes at like 10%, how do i go about repairing bad blocks?
i tried the SD card method, no good.. i checked the unit, no bad blocks =(
How did you check for bad blocks? Wanna do the same for mine. Cheers.
Try to use an earlyer RUUwrapper after exctract the .exe file. It solved my same problem. I tryed to flash Schaps 4.00 and stoped at 0% I extracted the 4.00 and the 3.60 roms and I overwrited the 4.00's ruuwrapper with 3.60's ruuwrapper and I launched it (4.00) I can flash with that ruuwrapper without problems I hope it works to you too
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
mickscores said:
mine JasJam (shaps 3.54b) gives the same problem.no gsm signal and after try to upgrade radio,it stuck at 0% and now is always at the 3 colour screen also after off-on battery...what can I do..please Help me!!!!!!
Click to expand...
Click to collapse
I think your problem is bigger, because if you haven't got gsm signal than maybe your Hermes has bricked...
that means that I will never fix anymore my hermes????
mickscores said:
that means that I will never fix anymore my hermes????
Click to expand...
Click to collapse
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
GorTen said:
I think you can unbick you hermes, but i don't know how exactly... I should read a lot here and ask befor do anything:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Have you ever dumpeb your ROM? Because if you have the dll-s befor brick than, if I know well, somebody can solve the problem with a service cable...
Click to expand...
Click to collapse
Is it me or are suddenly lot's of TYTN's losing their radio en IMEI, i lost mine too now it is just like a pda, using my old phone with bluetooth for internet. Impossible to flash the radio. Os only works fine.
Yep! Dunno why. GSM appears to be dying, Just got mine repaired in the post from T-Mobile. Just did a quick MTTY check on it (info 8) and there is BAD BLOCK on it already!!! Repaired???? Not so sure. Should I risk HARD-SPL and flash the rom from WM5 to WM6?
then suddenly the device lock wouldnt respond.
After many attempts to re flash rom it kept getting stuck with the error [262]??
The flash just wont go beyond 11%
the roms i used were from the T-mobile website. The official ones for my fone fone and provider. (UK)
RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe
i just dont understand what caused this.. now i cant even flash my fone!!
the f**king official roms are f'd up.
I also tried downgrading to HER_TMUK_1211103_1050500_WWE_Ship.exe
that too is from the t-mob website.
can anyne help??
Many thanks.
Update
i got it too flash back wm6 but the fone is really slow and is stuck in airplane mode.
any suggestions ?
ok i updated the spl, i get the NO GSM and i can boot into the OS
what rom should i try??
ok also tried flashing different roms, however it just keeps stopping at 11% just like before.
Someone must be able to help!
Dude see the thread above on this issue. Read through the thread with patience as it has ALL the info you would need in there.
Hermes Unbricking Thread
Hi -
I have and i tried all of the things to get it working again....
the rom flashing always gets stuck around 11% maybe sometimes 16% if im lucky.
and thats any rom, not just t-mobiles. i've tried various roms from this site too. however all of them do not want to go past 11-16%.
Model: T-Mob (UK) Vario II
ROM Before Flash: WM 5 As shipped
Radio Before Flash: --
Bootloader Before Flash: 1.04
Flash failed at: 11% (sometimes 16%)
Flashing ROM: RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe, HER_TMUK_1211103_1050500_WWE_Ship.exe, RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.10_108_Ship.exe
Flashing Radio: ???
Bootloader After Failure: 1.04
CID Before Failure Super CID: --
CID Corrupt: Yes
Radio Corrupt: Yes
GSM Error: Yes
Stuck In Bootloader: Yes
Stuck On Windows Mobile Splash: No
Can boot into OS: No
Tried mtty command set 14 0: no
Tried wiki problem number 5: Yes
mtty info 2 output: CID: ???
Current Device Status: unusable
d4vinder said:
Hi -
I have and i tried all of the things to get it working again....
the rom flashing always gets stuck around 11% maybe sometimes 16% if im lucky.
and thats any rom, not just t-mobiles. i've tried various roms from this site too. however all of them do not want to go past 11-16%.
Model: T-Mob (UK) Vario II
ROM Before Flash: WM 5 As shipped
Radio Before Flash: --
Bootloader Before Flash: 1.04
Flash failed at: 11% (sometimes 16%)
Flashing ROM: RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe, HER_TMUK_1211103_1050500_WWE_Ship.exe, RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.10_108_Ship.exe
Flashing Radio: ???
Bootloader After Failure: 1.04
CID Before Failure Super CID: --
CID Corrupt: Yes
Radio Corrupt: Yes
GSM Error: Yes
Stuck In Bootloader: Yes
Stuck On Windows Mobile Splash: No
Can boot into OS: No
Tried mtty command set 14 0: no
Tried wiki problem number 5: Yes
mtty info 2 output: CID: ???
Current Device Status: unusable
Click to expand...
Click to collapse
Sorry dude, not a good thing to hear but your device has a corrupt CID, not alot we can do about that
Might wanna try looking for a cheap replacment hermes on ebay or something?
mrvanx
I want to know what exactly does a corrupt CID mean?
as you know i have the same problem. Is CID a chip or something?
and about the motherboard replacement issue
I wrote several emails to imate support and told them my problem (SPL 2.03 IPL 1.04 NO GSM stuck at subsplash screen KITL disabled) and told them that everyone tells me that i have to replace my motherboard. they replied me that you DON'T need to replace your motherboard. your device just need to install wm5 in our service center in dubai. unfortunately it is too dificult for me to send my device to dubai.
well, after all failed, i've handed to tMob to fix...
lets see how much they ask for a charge to fix it....
since it was their "official rom" that f**kd it up anyway, i feel like they should give me a new fone.. wishful thinking...
OK, so T-mobile must be reading this thread or something because they just gave me a new Vario II. I believe that they could not re-instate my phone because it had been corrupted so badly.
I am happy with the new phone, seeing as mine was quite scratched up, however, i cannot fathom the fact that tMo put out a corrupt ROM for all their customers.
let this be a lesson to everyone....
dnt f**k with the original ROM!
CASE CLOSED!
congrats on the new phone. score one for the little guy.
d4vinder said:
OK, so T-mobile must be reading this thread or something because they just gave me a new Vario II. I believe that they could not re-instate my phone because it had been corrupted so badly.
I am happy with the new phone, seeing as mine was quite scratched up, however, i cannot fathom the fact that tMo put out a corrupt ROM for all their customers.
let this be a lesson to everyone....
dnt f**k with the original ROM!
CASE CLOSED!
Click to expand...
Click to collapse
Sorry but it was a messed up flash which corrupted the CID on the device, nothing to do with a corrupted ROM image. Suggest a more creful approach to flashing, no running processes....not USB hubs nothing which could mess with the flash at all.
mrvanx said:
Sorry but it was a messed up flash which corrupted the CID on the device, nothing to do with a corrupted ROM image. Suggest a more creful approach to flashing, no running processes....not USB hubs nothing which could mess with the flash at all.
Click to expand...
Click to collapse
on the contrary, i upgraded to wm6 fine, all was good for about 2 days, then one evening went to put in my code to unlock device and it just wouldn't do it, so i decided to reflash after many attempts.
so i did have wm6 running for about 2 days. then it got corrupt. update was succeful.. however the o/s was not stable.
hi all,
i have recieved a hermes with boot loader screen (tri color) when i try to switch it on it goes directly to 2 color screen doesnt go further at all. I've read the sticky thread . As the phone which i have shows on screen the following
HERM100
IPL-1.04
HERM100
SPL-1.40. Olipro
thats it nothing else exept tri color screen so read the sticky threadabout how to unbrick hermes and did following options when i flashed tmobile uk rom it goes further but it stucks at 11% and doesnt go further and when i try to flash a rom which has 1.04 (528420-ruu_hermes_1[1].18.255.3_1.18.255.108_1.03.03.10_qtek_wwe_ship) but it doesnt do anything with phone, it cant even detect the phone and give error straight away can anyone please guide me what should i do further to alive this phone
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
hi no reply but 53 views any mod plz help
WHaT YOU MEAN?
by:
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
---I think your hermes is bricked if you cant upgrade even a stock rom is bricked dude...
For the last thing you could do about it... flash a stock rom like ATT stripped you can find it on the WM6 subforum here on hermes forums... all the chefs put in the main post the link to it... if it doesnt works so... you are screwed up...
be sure ahave this:
Battery at 100% at least 60%
XP pc not vista not wm7 ok?
A nice usb cable and nice USB ports too on the XP pc
Dont run anything till it finish and... dont flash with SIM card and microSD inserted.
Go ahead and post your results again.
hi thanks for your reply i have tried these 2 following roms
HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108 (stucks at 12%)
RUU_Hermes_CINGULAR_WWE_3[1].62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship (stucks at 11%)
with these its not really working anyother thing which u think i should do
br
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
mmmm
Sounds like your batt is almost dead... maybe it shows... 70% but drains to fast is lying to you... or your cable is broken somewhere...
you can DL the stock stripped here
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
ultramag69 said:
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
Click to expand...
Click to collapse
yes u r right mate my phones radio rom was corrupted and thanks to + Que PPC for providing help and link of the official AT&T WM6 striped rom which turned my phone back to normal but the problem is when i went to device information it says like this
ROM version: 3.62.502.3
ROM date: 10/11/07
Radio version:
Protocol Version:
so radio and protocol versions are blank nothing is there so can u please tell me wt should i do to solve this or its not solvable at all thank you very much indeed to you guys. I really appreciate it
br Sherry
Not solvable... You might like to try running your SHIPPED STOCK Radio Rom, if you know what it is, but there isn't much hope of recovery once the radio goes... Look at it this way, couldn't hurt....