Hi all,
my first post and new to this.
Got my HTC a few days ago and had been hit by surprise, that it does not seem to support "ALS" Alternative Line Service which allows to be reachable with 1 SIM under 2 different Phone Nbrs and usual to toggle between them for outgoing calls.
Searched various threads and posts but couldn`t find much on the topic " alternative line service " other than the Orig. ROM, settings do not support this - hence, posting my question.
I am looking for a ROM, Tweak or Program that enables the HTC touch pro to use/support ALS (alternative line service). Useing German line provider EPLUS.
Ideal would be in german but english would do as well.
The SIM is enabled and works proper on my old Nokia phone.
Any feedback, input, support and help would be much appreciated.
Thanks - Stephan
I've seen entries in the registry for this, i believe you can just flip a couple of registry settings to enable it, can't test it though as my sim does not support it. if youd like me to dig up the registry entries, let me know
Da_G, thanks - yes, that would be great, happy to try it
FYI - I have advanced config installed and there was a setting like " show ALS page " but that didn`t change anything :-(
These are the 2 I found:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableALSSupport"=dword:0
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting]
"ShowALSPage"=dword:1
I imagine both your rilphone.dll and phonesetting.dll need to have support for als built in, they may need to be the specific dlls from the rom that works.
great stuff - thanks - I am one step further, I can now switch between the lines and do outgoing call on both lines after setting your above recommended registry settings but only one line works for incomeing which is line 1 the main line.
line 2 works only for ourgoing but not for incomeing calls
does anyone knows a fix ?
Hmm, you could try EnablePPCLine2VMN=dword:1 in the same spot as disablealssupport went, not sure what that does.. don't see any registry entries otherwise that are obvious for this, might have to use the rilphone.dll/phonesettings.dll from the rom that works
hhmm, can`t find that one or do I have to add it ?
Do you know which ROM works ?
Well, you said the original rom works, so you would need to extract it, get the rilphone.dll and phonesettings.dll from it, and cook them into whatever rom you are using..
Da_G, first thanks for all your help so far and sorry, in case I wan`t that clear - ALS is not supported on the orig ROM :-( that is why I was looking for a ROM that does or a tweak/program like you outlined which nearly made it work
Oh I see. Well, sorry, I don't know any further on the issue to help then
My only suggestion would be to try rilphone.dll/phonesettings.dll from a rom that does support als, i don't know of one that does, but maybe someone else? maybe the dialer too.. duno.
There's an AT Command that deals with ALS, if you want to try that..
AT+ALS? to query it (set to 0 on mine)
AT+ALS=1 to set it to 1
AT tool can be found in my post in raphael software forum msm72xx chipset tools
Da_G said:
There's an AT Command that deals with ALS, if you want to try that..
AT+ALS? to query it (set to 0 on mine)
AT+ALS=1 to set it to 1
AT tool can be found in my post in raphael software forum msm72xx chipset tools
Click to expand...
Click to collapse
I also have the same problem with ALS and incoming calls on line2 . I tried a few things, also this command, but no luck . I 'd realy be hapy if
someone have any new idea ...
br, Robert
Related
I was trying to find the solution for broken CT settings and came across this software
http://www.freewareppc.com/utilities/tunecleartype.shtml
Unfortunately, it doesn't work wih XDA2. But idea is right there. I've contacted developer and asked him about future versions.
ID64 said:
I was trying to find the solution for broken CT settings and came across this software
http://www.freewareppc.com/utilities/tunecleartype.shtml
Unfortunately, it doesn't work wih XDA2. But idea is right there. I've contacted developer and asked him about future versions.
Click to expand...
Click to collapse
How do you know it doesn't work?
Have you tried it?
A lot of stuff said to be PPC 2002 will still work.
But I can't even try it, as the link to the download, and even to the author website, seem down for me. (That is the link on THAT page, not the link here in your post!)
OK - I managed to find it elsewhere.
AND, I find that it DOES run on an XDA2. BUT... it doesn't seem to do much.
I'm wondering however, if this is because I already have decent Cleartype.
Can someone using one of the poor forms of CT, like the recent I-mate or T-Mobile versions try the attached file out, and see if it makes any difference.
You copy to phone, then run cab file on phone.
Then, go into Programs, and there will be a new entry "Tune Cleartype"
Run it and it will present two simple choices - "CT enabled/disabled", and type to use as ""Original/Alternative" (this can only be selected if option one is set to enabled of course).
Can someone with a poor version of CT try it, test EACH setting followed by an OK and a re-boot, and see if this does anything at all?
Cheers.
Zip attached.
Hi Shadamehr,
The "Use of ClearType" option doesn't enable ClearType, you still have to enable it in Screen settings.
Sadly, the Original/Alternative option doesn't seem to make any difference at all.
Particularly bad is White on Blue (i.e default scheme start menu, or text where the highlight is over it (i.e. lists).
Good idea though,
Phil
Damn.
Shame.
Cheers Phil.
But, by the way, you know the other thread where you post this message (I think), well there is a post in there by someone to say that the CUSTOMISATION ROM for the i-mate 1.72 upgrade, the special extra ROM... He says it FIXED his Cleartype.
You might want to read it and try it just in case...
Hi Shadamehr,
I'm running the imate 1.72 with the additional "special" extended ROM (1.72.800) from the ...SKU1.EXE file from clubimate.
I'm assuming that's what you meant?
jpsanders said:
Hi Shadamehr,
I'm running the imate 1.72 with the additional "special" extended ROM (1.72.800) from the ...SKU1.EXE file from clubimate.
I'm assuming that's what you meant?
Click to expand...
Click to collapse
It's confusing, this multiple thread stuff *lol*
If you mean in relation to the ROM add on that allegedly fixes Ceartype in the I-Mate latest build, then 'pass mate' - it wasn't me that posted the thread saying it fixed it, it was someone else - I was merely drawing attention to it, and asking the author to be specific as to EXACTLY which ROM or file fixed Cleartype for him.
Unless you were the poster that mentioned it, but I don't think so.
It's true, cleartype actually does show a good improvement after installing the English extended rom addition from clubimate. Not tremendoes, but at least bearable
There's still the strange coloration in white letters, but the blue shadows in black letters has gone. Cleartype still looks like having been shot at with hail bullets ...
Actually, I think Wiz is correct, it does look "better", just not "good" in the lastest ROM (but I'm not sure if it's main or "special" extended ROM that does it).
Phil
Yep, with this extra external ROM they DO look better, not perfect but better that without extra ROM. That just confirms that problem lies in software algorithm.
I have started a project and decided that before i get to far with it that i would make a post here and see if anyone else has done this yet or is working on it...
Anyway, i am in the process of making 1 cab to install all the settings from the provider, instead of the multiple ones found in the rom and in the ext rom.. Now i am only talking settings, not like the extra bloatware in the roms, like goodlink, BB connect, etc... I have made a cab so far but wont test it till mid next week when my test phone arrives.. So if anyone has done this then lets compare notes, if not then i should be able to release something for cingular soon. Which will come in handy when kyphur releases his cooked rom.... If i can master the cingular one then the other providers shouldnt be a problem...
Let me know what you think, ideas, etc.. i could even go as far as customizing it with some of the tweaks...
This Is A Great Idea. I've Been Looking For A Cab File Like This For Ages, It Would Make Updating The Firmware So Much Less Of A Hassle.
As To Wether Or Not Someones Done It Before You Might Want To Check This Site Out. Although The Settings Didn't Work For Me On Orange UK .
http://www.htcclub.net/en/settings.php
Cheers
This would be a great thing to use with any cooked Rom. Definately woul help those just chomping at the bit to get XDA Live...
Faria has a CAB in his AKU 3.3 Release for WIZARD, with most of the carrier settings. It has a provider selector. Maybe use that with his permission?
I have attached the Folder with all the cabs in that EXT ROM.
OpSet.CAB is probably the "Provider Selector"
what i was talking about was more for the hermes... all of the other cabs i have seen have been for other devices.. and most reg settings are completely different!!!
Aaaaah. If you have one cab ready and especially for CING and need to test it, you can post it here as a test CAB and I can test it for you. And should you need help getting the settings, I can help in that matter too. I could basically take the settings off the Faria one and put it in a format that you could use and PM it to you.
cyberdrakula said:
Aaaaah. If you have one cab ready and especially for CING and need to test it, you can post it here as a test CAB and I can test it for you. And should you need help getting the settings, I can help in that matter too. I could basically take the settings off the Faria one and put it in a format that you could use and PM it to you.
Click to expand...
Click to collapse
I have extracted all the settings and xml files from the latest cingular rom.. i have it put together for the most part just tying up some loose ends on it..
The Settings I meant was for all providers that are available in that folder. If need be, I am available to test the cab for you as I have a spare device that I test things on .
cyberdrakula said:
The Settings I meant was for all providers that are available in that folder. If need be, I am available to test the cab for you as I have a spare device that I test things on .
Click to expand...
Click to collapse
what i was saying is that those cabs are for the wizard... some of the settings and location of the settings in the reg are different on the hermes.. but let me perfect this one before we worry about the other providers...
I would love to have something like this to go along with a rom that is completely bare...
shotgunmark,
im interested in helping with development on this proj... i think the easiest way is to put all settings into an xml file and with .NET2.0 framework and studio 2005 i can write a prog to insert the connection info into the reg...
walshieau said:
shotgunmark,
im interested in helping with development on this proj... i think the easiest way is to put all settings into an xml file and with .NET2.0 framework and studio 2005 i can write a prog to insert the connection info into the reg...
Click to expand...
Click to collapse
i have made 2 xml files already, 1 for the cabs and xml's that install from the OS and 1 for the cabs in the ext rom.. from this i have made a cab, which seems to install about 90% of the way then fails.. i will work on this more in the next few days, will also have more time after my test phone arrives as i wont have to keep jacking around with my phone... After i get this successfully made then with your help we should be able to make an app that will allow you to choose which provider you want and it will install those settings.
I also wanted to note that we will probably want to go the route of the cab file for the different carriers since some of them actually have to install different files specific to them...
shogunmark said:
i have made 2 xml files already, 1 for the cabs and xml's that install from the OS and 1 for the cabs in the ext rom.. from this i have made a cab, which seems to install about 90% of the way then fails.. i will work on this more in the next few days, will also have more time after my test phone arrives as i wont have to keep jacking around with my phone... After i get this successfully made then with your help we should be able to make an app that will allow you to choose which provider you want and it will install those settings.
I also wanted to note that we will probably want to go the route of the cab file for the different carriers since some of them actually have to install different files specific to them...
Click to expand...
Click to collapse
yeah we could work it that way... ill do some more investigation this arvo with testing..
Cab's
walshieau said:
yeah we could work it that way... ill do some more investigation this arvo with testing..
Click to expand...
Click to collapse
FYI, Not sure if this is what you are looking for when you refer to the carrier setting Cab's. Bur the Original Imate JasJam Rom came with a Stack (28) Cabs for EMEA, Aust & NZ.. I have these or they can be sourced from the old ROM's that were on the site.. They also had the selection program also of course.. Not sure if you can just use that, Modify and extend to cover more??
the plan is to implement an application like netwiz on the dopod roms... as this cannot be extracted... it can but will only run on the dopod rom...
I would be very interested in this as well, one of the major things I have missed since leaving my ETEN m600 for the Hermes is that it had operator specific settings for tons of operators including for those of us up north.
any updates on this?
Yea i was wondering what happened with this as well. this would be an excellent cab to have in the extended ROM. or to just have period.
its still on my list.. i didnt forget about it... progress has slowed just a tad due to my work schedule changing every other week (you would think that a 120year old company could get a schedule right)....
shogunmark said:
its still on my list.. i didnt forget about it... progress has slowed just a tad due to my work schedule changing every other week (you would think that a 120year old company could get a schedule right)....
Click to expand...
Click to collapse
i hope to have a beta version ready to test in a few weeks....
Hi there,
This software is an Antitheft and you can use it to track your device when it was lost or stolen. It works catching a formated SMS sent from any phone and then send useful informations back.
You can use it to others objectives, like keep your eye in your child. Use your imagination!
If the thief change your SIM card, you will receive a SMS alerting you and you still can track your device. All you need to do is set an emergency cel number.
RemoteTracker can be added to third part custom ROMs. But, with a hard reset all configurations was lost. Now, RTRegCreate tool can create a configuration file using your PC. ROM cookers can use this DLL to make RT hard reset safe!
I need to learn VisualStudio 2008 and develop to Windows Mobile for professional purposes. I choose to make this projet because thought it might be fun
My Glofish X800 has Panot (from eten-users.eu) custom ROM with WM6.1 and native .NET 3.5, but you can download this .NET version if needed here: http://www.microsoft.com/Downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
The installer CAB file and source code of RemoteTracker can be downloaded here:
http://remotetracker.sourceforge.net
This version answer the commands below:
rt#help - send this list of commands;
rt#ehelp - send this list of commands by e-mail;
rt#cb#<some_tel_number> - turn on the Phone and call the number passed as parameter;
rt#gp#<some_cel_number> - try to get GPS coordinates and send back to cel number passed as parameter.
rt#egp#<some_e-mail_account> - try to get GPS coordinates and send back to e-mail passed as parameter.
rt#pb#<some_cel_number> - Use them to receive your contacts stored in SIM card back. If you do not take the phone back, at least the contacts will be saved.
rt#epb#<some_e-mail_account> - Same as pb, but the message goes by e-mail.
rt#elt#<some_e-mail_account> - This command will start GPS, Log the path about 5-6 minutes and send the KMZ file by e-mail. This file can be opened with Google Earth. Very cool.
rt#go#<some_cel_number> - get 'settings/owner' informations.
rt#ego#<some_e-mail_account> - Same as go, but the message goes by e-mail.
rt#rst - softreset device.
rt#dkz - delete all kmz files.
rt#dsc - delete all contacts in SIM card.
rt#eganfl - Send, by e-mail, a list of all incoming and outgoing calls if you have VITO audio notes installed.
rt#eganf - Send, by e-mail, all incoming and outgoing calls records if you have VITO audio notes installed.
rt#findme - Same as 'gp' command, but ask you if you want to answer the command.
rt#alarm - Just play a sound. Useful when you don't remember where the device is, but you know it's your home.
rt#gi - Send informations about your phone: IMSI and IMEI.
rt#egi - Same as 'gi' but the answer goes by e-mail.
rt#msg - Send a message to be displayed on your device.
The main screen has a tab with help.
I did this project to be multi-language. In this version there is Portuguese (my mother language), English (sorry about it, my english is very bad), Dutch (thanks to Cybermoose, from etenusers) and Spanish (thanks to Popy from etenusers). If you want to make your own translate, I can tell how. Very simple.
If you decide to try RemoteTracker, I would like to read reviews, comments and suggestions. Remember this is a beta version and may contain bugs. Use at your own risk and with caution.
Please see ChangeLog.txt to see the improvements.
For those of you who are having the problem with the help file,
with some strange certificate errors and PIE opening when you start RTconfig, the problem lies with having the default program that opens html set to something besides PIE (Opera 9.5, perhaps)
To fix this, use schap's Advanced Config tool to set .htm and .html files to be opened by:
Code: iexplore.exe file: %1
Originally Posted by xd1936. Thank you very much!!!
Keep RemoteTracker up to date!
There is an integration with AppToDate. This application verify if configured softwares are up to date or not. If not, you are alerted, and invited to download the new version! Very cool and useful.
You can download AppToDate here: http://www.modaco.com/content/apptodate/267096/download-apptodate-supported-applications/
After install AppToDate, please download RemoteTracker and run RTConfig or softreset your device to configure AppToDate.
Try this and don't forget a new version never more!
--> It is a work in progress. In future versions I will make a lot more.
Support this project
You can support this project making a donation clicking here or clicking the banners in the project website: http://remotetracker.sourceforge.net
Cheers,
Joubert Vasconcelos
my apologies if i'm blowing up a bubble here.. but doesn't TrackMe do the EXACT same thing?
nir36 said:
my apologies if i'm blowing up a bubble here.. but isn't TrackMe does the EXACT same thing?
Click to expand...
Click to collapse
I didn't know this software. Very good I think, I'll try later. But I suspect the objectives are different. RemoteTracker works only in silent mode to help you find your device if you loose it.
There is only one user interface to configure few parameters. After that you don't need to use it any more.
All functions are activated by SMS (remotely) and the answers will be by SMS or e-mail. For example you can use your wife's phone to send SMS to your lost phone and then receive GPS coordinates to find it.
If you want to compare RemoteTracker with other software, it's more similar to Mobile Justice, but with more features.
This is first goal of RemoteTracker. The second is help you to retrieve your personal data back. It's not totaly done yet. There is a work in progress.
Hope this answer your question
I think this is fantastic! Great idea! Do you think you can incorperate more CDMA-friendly, not-solely-sim-card features? I'm downloading now
I don't have a CDMA device But I think I can search for informations and then code, but without tests.
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
shantzg001 said:
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
Click to expand...
Click to collapse
I agree and thanks. I did not like the similar software in the market. And I need to learn VS .net, so I decide to make one by my self to learn and also for fun.
S.V.I said:
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
Click to expand...
Click to collapse
One thing I'm thinking is how to reinstall RT automaticaly after a hard reset. May be using external cards, but the autorun feature only works when card in inserted.
Built into the ROM is possible, but only ROM cookers or manufactures can do it.
I think its early to think about it. RT have to me more tested.
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
nir36 said:
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
Click to expand...
Click to collapse
All WIMP does is send an SMS back with the current GPS co-ordinates, very useful but severely lacking compared to what the OP is trying to do. That said it is native PPC code with no need for .NET.
Surely we should commend anyone trying to write alternatives as without that attitude we would all be using Windows with MS Office and browsing using IE. Possibly not the best analogy but it will do.
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
i wasn't complaining. i think it's wonderful people are trying to develope new software. i was just giving reference.
phamhien said:
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
Click to expand...
Click to collapse
When you run RT for the first time, the IMSI of your SIM card is stored. After a new 'boot' this IMSI is verified again. If the new IMSI does not match with the old, you will receive a SMS alerting you. This message has the new number. You must input an emercency mobile number in config tab. This number, of course, must be a mobile number diferent of yours (your wifes, mother, son, or so).
hoolahoous said:
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
Click to expand...
Click to collapse
I have no idea how to get this information! But it's a good idead and I'll search this information.
Greaattttttt !!!
Can help for french translation, if you want to.
naboleo said:
Greaattttttt !!!
Can help for french translation, if you want to.
Click to expand...
Click to collapse
Of course I do! Thank you very much!
Very simple: copy and rename english.xml and english.htm to french.xml and french.html.
Edit both files and just translate ignoring the words between < and > characters (those are "commands").
Edit language.xml file and insert the lines below before </languages> (last line):
<language>
<code>4</code>
<name>Français</name>
<file>french.xml</file>
<help>french.html</help>
</language>
Today I was roaming around some blogs and stumbled upon an article with some tips to protect your "smartphone", they talked about a software called mSafe, I even downloaded it for test.
Anyway, it does mostly what you want to develop. The site is http://www.motionapps.com. Their apps are intended for Treos but mSafe states that it's compatible with WM5.
Just for your reference.
joubertvasc said:
I have no idea how to get this information! But it's a good idead and I'll search this information.
Click to expand...
Click to collapse
Well... I'm not familiar with windows mobile programming but I'm a SIM Card programmer. I don't know if you can access STK commands (commands to the sim card) via the Windows Mobile API's but, if you can, there is a function ("proactive command" using the specific SIM terms) called "PROVIDE LOCAL INFORMATION" that gives you exactly this information (and more)...
Hope it helps...
I don't have too much time, so i do now only short description
-Language: Polish (first), English (secondary)
-Graphics from Dr. Martin Gonzo rom
-Moblue
-Jbed
-Skinz Sudoku (game)
-Resco explorer
-CeleTask
-add iconbar
-CommManager
-Reset function
DOWNLOAD
Latest SPL and some stuff needed to upgrade rom
This SPL is same as this for WM6 (patched_ruu.exe for upgrade)
SPL & STUFF
Thanks for this great rom.
It looks great.
At last the screen comes on when I set an MP3 for the ringtone!!!
Great work.
Thanks for the ROM. Finally one without any Chinese stuff in it.
Just 2 more questions: does this ROM support use of SDHC cards and how to change the date style (from short to long date format)
1 - this and all other rom's dosn't support sdhc card's
2 - need to change it in registry editor
Thanks for the quick reply. Re the reg editor: do you know what key needs to be changed (and to what value)?
Can you please give a step to step guide, for how to install this rom on the SPV C550 please?
to kuljit55:
now i don't have to much time to do tutorial about it, but in free time i try to describe "what and how"
what Windows now you have?
to wirelezzwizzerd:
find....
[HKEY_LOCAL_MACHINE\nls\overrides]
and change...
"SSDte"="dd/MM/yyyy"
to...
"SSDte"="dddd, dd-MMM-yyyy"
Great rom,thx lazaj. I have problem with configure mms setting(apn)
SMS Problem
Hi. I flashed
Found the following two problems so far
I found SMS come in... but none will send,...
T9 Eglish is not correct.
Any fixes?
harvsingh said:
Hi. I flashed
Found the following two problems so far
I found SMS come in... but none will send,...
Click to expand...
Click to collapse
SMS center is correctly set?!
Not yet tested, but in older versions:
Edit number at Start/Settings/Phone/CallOptions/TextMessageServiceCenter.
what's wrong with t9?
lazaj007 said:
to kuljit55:
now i don't have to much time to do tutorial about it, but in free time i try to describe "what and how"
what Windows now you have?
to wirelezzwizzerd:
find....
[HKEY_LOCAL_MACHINE\nls\overrides]
and change...
"SSDte"="dd/MM/yyyy"
to...
"SSDte"="dddd, dd-MMM-yyyy"
Click to expand...
Click to collapse
I tried it, changed the value to "dddd d MMMM yyyy" but then the date field in the first panel showed up empty (unfortunately)
Thanks for the Firmware, works and looks nice!
A few small problems I found:
MoBlue is only in Polish.
Some error messages (as from media player) are also only Polish.
Is there a way to fix this?
moblue is in english too, but you must change them i moblue settings or in registry editor.
about WMP i check it
lazaj007 said:
moblue is in english too, but you must change them i moblue settings or in registry editor.
Click to expand...
Click to collapse
Works! Thanks.
Changed in registry: moblue.pl.lang.txt -> moblue.lang.txt
Do we have to flash some specificradio for WM6.1? This is the best rom so far, but i still have most common problems that occur with 6.1: phone keeps losing coverage and battery sometimes drains for no apparent reason.
SMS and T9
someone_01 said:
SMS center is correctly set?!
Not yet tested, but in older versions:
Edit number at Start/Settings/Phone/CallOptions/TextMessageServiceCenter.
Click to expand...
Click to collapse
Hi.
Yes I know where the settings are.. but when i enter a number. ...
+447973100973 (orange UK)
and press done.
go back in.. and its missing again.
as for the T9... predictive text comes up with some real weird and wonderful words along with pl characters
try typing "tomorrow" "monday" "tuesday" etc etc
Is there a diff t9 english i can use? how do you set it?
harvsingh said:
+447973100973 (orange UK)
and press done.
go back in.. and its missing again.
Is there a diff t9 english i can use? how do you set it?
Click to expand...
Click to collapse
For T9 try a download from hxxp://melgurth.ovh.org/index.php?page=downloads
The setting of SMS service center works fine for me
When I clear the entry, it was auto filled by the network,
when I modifiy the default, it stays as I enter the value.
harvsingh said:
Hi.
Yes I know where the settings are.. but when i enter a number. ...
+447973100973 (orange UK)
and press done.
go back in.. and its missing again.
as for the T9... predictive text comes up with some real weird and wonderful words along with pl characters
try typing "tomorrow" "monday" "tuesday" etc etc
Is there a diff t9 english i can use? how do you set it?
Click to expand...
Click to collapse
Thanks for the T9 link.
I will drive it and see what happens..
Howver... I have found.... Putting in a normal one line sim card.. (t-mobile) it works fine..and shows and saves the SMSC
A sim with Line 1 and Line 2 (ALS) not cut chopped card... before someone says it) Orange ...does not work.
What i need is where it stores this info.
Searching the Registy shows up nothing.
Can someone point me in the right direction?
Thanks
cont....
Thanks for the T9 link.
I will drive it and see what happens..
Howver... I have found.... Putting in a normal one line sim card.. (t-mobile) it works fine..and shows and saves the SMSC
A sim with Line 1 and Line 2 (ALS) not cut chopped card... before someone says it) Orange ...does not work.
What i need is where it stores this info.
Searching the Registy shows up nothing.
Can someone point me in the right direction?
FYI.. the other wm6.1 for the hurricane with bt and ir fixed..(chinese and english) picks up the smsc perfectly.
Is there a different file i could replace???
Thanks
Hello,
This Fix is to hide SIM Contacts. If you have duplicated outlook/IM and SIM contacts this fix is very usefull. No more duplicated contacts
Many Fixs to hide SIM contacts didn't work for me. So i make this new one that force to hide SIM contacts.
This fix change the registry key ControlPanel\Phone\ShowSIM to 0 and after a soft reset a light executable will run but only for a few seconds.
Tested in: HTC Touch HD (backstone) with wm6.1.
Please tell me if doesn't work for you.
SeeYa,
Rilhas
Interesting program, done by yourself?
Just a registry change?
Will try.
In WM6.1, do you have problem modifiying the SIM Contacts? The "EDIT" is not highlighted, that is not usable, but Phone Contact, "EDIT" is highlight, that is can edit. Any Registry change to fix this?
ya, by myself
In my pocket pc i don't have your problem. i can modify the SIM Contacts.
I don't know any registry key for that but the solution is simple... don't use SIM Contacts because it are very limited
Duplicates the much smaller (2.5K because written in C) and same soft-reset proof functionality of the proven KaiserSimFix.
Working hard for you since the Kaiser and listed in the Advanced Config Wiki.
Strange how it doesn't work for you since it mods the same registry point.
I write this code because no other software, includes the KaiserSimFix, works in my HTC Touch HD with original ROM
rilhas said:
Please tell me if doesn't work for you.
Click to expand...
Click to collapse
I appreciate the learning experience of writing your own app, but you still failed to file a bug-report as you are asking of others.
Since the same registry point is modified, it's obtuse to conclude it to not "work" on the Touch HD especially with the lack of any other details.
Hi all
Go and take look at my reply if you still have some troubles
http://forum.xda-developers.com/showthread.php?p=3315819#post3315819
cheers
tried all the others an none would work, this seems to have done the trick !
thanks !
I can also say, tried everything else, and this is the only one that worked!
.G.
kidinspace said:
I can also say, tried everything else, and this is the only one that worked!
.G.
Click to expand...
Click to collapse
+ 1
Congratulations and thank you
thanks this work for me!
fixed
an amazing fix that I wanted! thanks!
tnx a lot ....
I tried a lot of things (always without success), finaly works for me!