Related
HI Everyone,
Ive tried a leather case - didint like it as you have to flip open flaps to access it and makes phone calls akward.
Ive tried an alloy case - you have to open it to use it and use the keyboard
Silicon Case - bad experience using these because I used one on my old Nokia N73 and it still dented the housing when it was dropped.
Now, does anyone know where to get a crystal clear plastic hard case that has 2 parts, one to cover the front and one to cover the back whicl still getting access to the screen. I know the screen wont be protected but a screen protector will do the job of preventing scratches. Also, a swivel belt clip screw mount on the back will be nice too,
I know there are some for the Wizard, but I havent seen any for the Hermes yet. This case will be ideal as you get all the access to the device and you dont hide the beauty of it behind leather and alloy like in other cases.
Any help will be appreciated
jasjamming said:
Now, does anyone know where to get a crystal clear plastic hard case that has 2 parts, one to cover the front and one to cover the back whicl still getting access to the screen.
Click to expand...
Click to collapse
Don't want to be the bearer of bad news, but I just had a look on eBay and there aren't any listed there. I would have thought that if anybody was manufacturing such a case that they would be available on FleaBay.
I posted an almost identical post requiring the same thing not so long ago- no repsonses as of yet!
These are widely available for many other 'slider' phones but not yet for our one.
Ive sent two request to Boxwave. Their response is need more request.
I have been looking for a Crystal Case before I even got my 8525. I love this type of case. Sadly though it doesn't exist yet.
If you guys gohere and request an Active Case maybe we will have one soon. Note you must select Active Case because the web page loads with a check mark next to the ClearTouch Anti-Glare and that's not the same.
yep, i put in a request.
this type of case will be ideal as it will show the sleek lines of the tytn/jasjam, protect it, and allow keyboard access without unclipping anything.
what could be simpler....?
i think the best bet is going to be check with boxwave to see when they get it, i personally did not like the crystal clear on my 8125 it just felt wrong i gave it to one of my coworkers
shigeo said:
i think the best bet is going to be check with boxwave to see when they get it, i personally did not like the crystal clear on my 8125 it just felt wrong i gave it to one of my coworkers
Click to expand...
Click to collapse
What felt so wrong about it?
I am looking for a newer bricked(totally completely useless) T-Mobile MDA like my avatar for cheap and in reasonable physical shape so I can fix my MDA. The housing is totally dinged and scratched on my phone and the screen has a nasty scratch on it that is rediculously visible.
If anyone has one of these, please let me know.
Thanks, Dan.
Housings have got a lot cheaper on eBay now, used to be about £40, now down to about £24-£30 shipped. These are original "as new" removed from returned phones, I've never seen a non-OEM housing. Touch screen about £10 shipped from HK. I doubt you'll be able to buy even a bricked Wizard for £34-£40 so it might be the way to go.
First thing I did was drop my Wizard so the chip has been staring me in the face every day since. I'll wait for a few more dings before I part with any cash. A screen protector from poundland was a great investment though!
Edit: Sorry, see you're in the States so double those numbers...
I bought a couple of housings recently. Things to be wary of:
1) The OEM case I bought came without an antenna glued to the top back piece, and was missing little pieces of plastic for holding the stylus in, etc. As a result it would have taken a HUGE amount of work to rebuild the case.
2) I bought an 'As New' housing from a reclaimed phone, and it was FAR from as new. It looked far worse than my current housing, so I sent it back.
Hello,
Has anyone tried the Body Glove case?
http://www.bodyglove.com/store/products_detail.php?product_id=30716&zip=19116&Go.x=15&Go.y=13&Go=Go
It's $30, but do you guys think it's worth it?
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
sooperxtool said:
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
Click to expand...
Click to collapse
Wouldnt that case cover the proximity sensor???
I have been using it for about 1.5 weeks with my Tmob TP2. The bottom cover is a little tricky, but it works pretty good. I took the back clip off and put the plug in. I mainly keep it in my shirt or my pants pocket.
Got one today
I got one today and is does seem pretty sturdy. It has the feeling of soft leather or neoprene over hard plastic covering most of the edges and then a mesh on the sides for griping. as one person mentioned you have have the clip on or off which is nice. It does seem really bulky when I have it clipped in the inside of my front jeans pocket. I'm still trying to decide if I want to keep it or get something else but I do think it is pretty nice.
1buprofen
bimori said:
Wouldnt that case cover the proximity sensor???
Click to expand...
Click to collapse
It looks like it will, so a little drilling might be required. I have one coming in the mail, so I'll let you know if it does.
I saw this case at my local T-Mobile store. It was too bulky and interfered too much with the number keys when the screen was flipped up. T-Mobile sales a really nice soft gel like shell with all the right holes cut out for the T-Mobile version of the TP2 (including one for the proximity sensor). It costs about $12 +/-.
sooperxtool said:
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
Click to expand...
Click to collapse
Best part it's in NJ, very close to me
When you say "It was too bulky and interfered too much with the number keys when the screen was flipped up" do you mean its got a cover that protects the screen too?
Yes. It's the same type as the BodyGlove, but without the clip, feels more rubbery, and isn't quite as thick. It still gets in the way of the number keys when tilting the screen, but not as much since it's a little thinner. I can actually still use the number keys with this case, where as with the bodyglove I couldn't.
DeDBlanK said:
I have been using it for about 1.5 weeks with my Tmob TP2. The bottom cover is a little tricky, but it works pretty good. I took the back clip off and put the plug in. I mainly keep it in my shirt or my pants pocket.
Click to expand...
Click to collapse
You will def have to drill a little for the proximity sensor, but other than that, it fits really well, and gives a little better grip. It does make the phone a little thicker, but it protects it well.
dasher said:
I saw this case at my local T-Mobile store. It was too bulky and interfered too much with the number keys when the screen was flipped up. T-Mobile sales a really nice soft gel like shell with all the right holes cut out for the T-Mobile version of the TP2 (including one for the proximity sensor). It costs about $12 +/-.
Click to expand...
Click to collapse
Is this the soft gel case that the T-Mobile store sells?
http://cgi.ebay.com/for-HTC-TOUCH-PRO2-GSM-T-MOBILE-OEM-GEL-SKIN-CASE_W0QQitemZ350242545193QQcmdZViewItemQQptZPDA_Accessories?hash=item518c151e29&_trksid=p3286.c0.m14
If not, have you seen it sold anywhere online?
Yes, that's the one.
I just bought the t-mobile soft gel case for my touch pro 2 and it fits pretty well, Doesn't block the proximity sensor. So for the price , 12.99 + tax, I recomend it.
Glad it worked out for you. I've had the case for over a week now and love it!
Updated BodyGlove Case Coming Soon!
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
As for the thinner GEL type case, I tried it today and didn't like it as much as the BG version since it seemed to be easy to dislodge the the lower shell middle clips. Within a few minutes I noticed that I had to bump the center clips back in place more than once. It also seemed to interfere with the slide a little, something the BG does not do.
I would have to vote for the BG (updated one) as the better case since the rigid shell fits and stays on better. Yes, the BG is a little bulkier but I would have to guess that it would provide pretty good protection in the event of gravity assisted boo-boo.
Regards,
Gordo
Body Glove in a cradle.
I love my BG case. I got it a couple of days ago. All I had to do was drill a small hole for the proximity sensor, which btw is an easy fix. I wonder if there is a cradle that will fit it now that it's a lot thicker.
I think I'd have a better luck making my own. I think a triangular wedge with a lip/edge on one the sides would work best since I'm planning to have the keyboard open while it's charging. I'll post pics (probably on a different thread). What do you guys think?
jetjockgordo said:
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
As for the thinner GEL type case, I tried it today and didn't like it as much as the BG version since it seemed to be easy to dislodge the the lower shell middle clips. Within a few minutes I noticed that I had to bump the center clips back in place more than once. It also seemed to interfere with the slide a little, something the BG does not do.
I would have to vote for the BG (updated one) as the better case since the rigid shell fits and stays on better. Yes, the BG is a little bulkier but I would have to guess that it would provide pretty good protection in the event of gravity assisted boo-boo.
Regards,
Gordo
Click to expand...
Click to collapse
็็ำัHey there!
Don't forget to put the new one on eBay with WORLDWIDE SHIPPING !!!
(or at least Australia)
Cheers!
jetjockgordo said:
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
Regards,
Gordo
Click to expand...
Click to collapse
I emailed BG about this the other day and they couldn't tell if this was a mistake, a bad batch, or what... so they said they would send me a new one to see if it was better (this was before i saw your thread).
Also, there is a hole on the BACK cover that the BG case blocks, but the gel of same type don't. Someone said it was a noise mic. (I don't know).
For those of you that drilled... was it hard to keep the material from wanting to tear or fray? How did you go about it?
etro
etropic said:
I emailed BG about this the other day and they couldn't tell if this was a mistake, a bad batch, or what... so they said they would send me a new one to see if it was better (this was before i saw your thread).
Also, there is a hole on the BACK cover that the BG case blocks, but the gel of same type don't. Someone said it was a noise mic. (I don't know).
For those of you that drilled... was it hard to keep the material from wanting to tear or fray? How did you go about it?
etro
Click to expand...
Click to collapse
It wasn't hard at all. I just got a small drillbit and I used a dremel tool. You can't even tell that I "modified" it.
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Thanks for the review! I bought the same case a few months ago, although it was advertised as for the Verizon Touch Pro 2. I was unaware they made one for the Tilt 2. Now I won't have to worry about it falling off randomly!
thsi case probably wouldnt work with invisible shield on too huh
Doinshots said:
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Click to expand...
Click to collapse
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
JJHiemenz said:
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Click to expand...
Click to collapse
Man, sorry you had so many issues. The PTT button is indeed covered, but she has had no issues with it at all (hers is remapped to toggle bluetooth on and off). The fit on the screen portion is *very* tight. Took some effort to get it installed properly.
Also, mine definitely said "Tilt 2" on the packaging.
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
sleze said:
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Click to expand...
Click to collapse
Nope, the PTT button still works perfectly under the cover. Does not get accidentally pressed and is responsive when you push it.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
Sounds like skinning/shielding your phone with GadgetShieldz might be the way to go. The GadgetShieldz does take a little time to install but it works. The protective film on the screen is easy to install and bubble free. It makes the phone non-slippery. It would not protect the phone like a case but it does prevent scratches. When installed, it adds very little weight and dimension to the phone.
Actually, there are other protective films/shields but I only have experience with GadgetShieldZ. It might work for you.
Boxwave Praetorian Crystal Slip for Tilt 2
orb3000 said:
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
I wish I'd seen your post sooner! Home Depot and Lowe's does indeed have something like that. I'm sure lots of hardware stores do. It's called Plasti-Dip. I have a can right here You can buy it as spray-on or dip/brush-on applications. I use it on mountain bike parts and tools for extra grip. I'm not positive how well it will stick to a slick plastic surface but it is an option.
BluEyedTiger said:
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
Click to expand...
Click to collapse
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
It's held up quiet nice...even with as much flashing I do (have to remove the bottom piece every time). I've figured out a great way to put it back on that's really fast and easy. Some people say it's difficult to get on. I think the top piece is the hard part but I've taken it off a few times and have no issues there either. It still fits good. If I remember, next time I take it off I'll shoot some pics of how I put it on and upload them.
Learic said:
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
Click to expand...
Click to collapse
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
BluEyedTiger said:
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
Click to expand...
Click to collapse
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Learic said:
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Click to expand...
Click to collapse
Yeah I got mine directly from boxwave. They have like 3 different models of that slip. Most of the adds I saw on Amazon and eBay claimed it would fit on 3 or 4 different TP2 models which I knew it wouldn't. I emailed boxwave about the pics in their online catalog because it didn't look like a Tilt 2 to me and they admitted it wasn't. They said they didn't have one for the pics. Which made sense I mean why spend that much just to get pics but they promised it would fit so I figured what the hell. The hard covers kinda suck.
Thanks for the replies, I guess I will go ahead and order it and see what happens.
I just got the unbranded version of this case off ebay (the seller's id was e-story).
It's not too bad on my unbranded TP2. It's slightly more difficult to slide out the keyboard, and when the screen is fully tilted, the top row of keys are slightly obscured, but nothing too major in my opinion.
I like that the case improves the grip of the phone, but I'm also rather concerned that the case will eventually melt under hotter conditions since the material feels rather gummy.
http://www.youtube.com/watch?v=x1x55gEKSiI&feature=youtu.be
The above clip is a video of my problem
So I have been on a 2 month odyssey with my uk, euro titan and its original back cover, although I had its original back cover painted white and works great, I have been trying to buy replacement back covers from ebay only to find that they do not securely fit, after a few tugs, pulling it out of my pocked or just letting it drop lightly say on my couch, the back cover and phone easily come apart.
I have purchased from sellers in china and even purchased from a supposed uk seller from ebay.co.uk who turned out to still be a seller in china, both covers do clasp into place with the phones screen/guts, but pop easily out with the slightest bump.
I currently am in contact with HTC America who are going to send me an oem back cover however it has been backordered for 2 weeks now.
although I love my painted white back cover, it has experienced wear and tear and i just long for things to be "normal" again. my question is has anyone heard of this problem with the titan and back covers that don't fit properly? besides buying a $70 oem back cover from htc uk accessories, does anyone have any tips or know anything that could help?
I also want to mention I had sent my phone to htc America to replace the screen, gps and the worn out "button presses" on the inside of the phone. and they did, they replaced each and every single thing including the inner plastic body lining where the volume button "presses" are and the plastic surrounding the sim card all replaced, I can only guess that if maybe I did not ask to replace this plastic that hooks itself to the back cover that maybe any grey market back cover would have fit securely?
and also want to mention yes my original back cover that is painted still fits and firmly grips the phone, when I look at all 3 back covers the 2 from china and my painted oem back cover, I can't tell a difference at all in their inner workings SIGH