dear all
no gsm,no radio,no imei
i can't flash any rom include Original rom of dopod 838pro asia
my device is dopod 838 pro
i got
HERM100
ipl 1.01
spl 1.40
but i can't flash anything
i read carefully from wiki but it doesn't give me a solution...
i always get 0% stuck and connection error message
maybe last solution Flashing via JTAG...
but i have a problem i don't understand what are JTAG for???
anybody can help me To explain or give me instruction what is JTAG??
thanks...
sorry for my english because i;m indonesian
To Install Hard SPL V7.
Untick "Allow all usb connections" in Activesync on pc.
Go to bootloader on Hermes. Connect Hermes to pc.
Download Hard SPL V7 from here -http://forum.xda-developers.com/showthread.php?t=296722
Run RUU_Wrapper.exe of Hard SPL V7.
To try to recover the Radio ROM.
Find SHIPPED Stock ROM. Download.
Use sd card method to flash to Hermes.
SD Card Method.
1. Format 2Gb or less sd card FAT32.
2. Copy .nbh file to it & rename to hermimg.nbh.
3. Insert sd card into Hermes, reset to bootloader and follow instructions.
Flashing stock rom may take up to 30 minutes. DON'T INTERRUPT THE FLASH.....
Cheers...
ultramag69 said:
To Install Hard SPL V7.
Untick "Allow all usb connections" in Activesync on pc.
Go to bootloader on Hermes. Connect Hermes to pc.
Download Hard SPL V7 from here -http://forum.xda-developers.com/showthread.php?t=296722
Run RUU_Wrapper.exe of Hard SPL V7.
To try to recover the Radio ROM.
Find SHIPPED Stock ROM. Download.
Use sd card method to flash to Hermes.
SD Card Method.
1. Format 2Gb or less sd card FAT32.
2. Copy .nbh file to it & rename to hermimg.nbh.
3. Insert sd card into Hermes, reset to bootloader and follow instructions.
Flashing stock rom may take up to 30 minutes. DON'T INTERRUPT THE FLASH.....
Cheers...
Click to expand...
Click to collapse
Thanks a lot
i was try flashing from sd but what i got?
progress bar still no working??
it this Normal??
or something wrong with my device???
i try flash via activesync and bootloader "HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship"
with modified RUU but it still 1% progress bar show
what wrong with my device??
i really hope u can fix and help me to unbrick my devices...
ultramag69 said:
To Install Hard SPL V7.
Untick "Allow all usb connections" in Activesync on pc.
Go to bootloader on Hermes. Connect Hermes to pc.
Download Hard SPL V7 from here -http://forum.xda-developers.com/showthread.php?t=296722
Run RUU_Wrapper.exe of Hard SPL V7.
To try to recover the Radio ROM.
Find SHIPPED Stock ROM. Download.
Use sd card method to flash to Hermes.
SD Card Method.
1. Format 2Gb or less sd card FAT32.
2. Copy .nbh file to it & rename to hermimg.nbh.
3. Insert sd card into Hermes, reset to bootloader and follow instructions.
Flashing stock rom may take up to 30 minutes. DON'T INTERRUPT THE FLASH.....
Cheers...
Click to expand...
Click to collapse
thanks
i've follow that instruction flash via SD but on my hermes screen progress bar still stuck...it is normal??all ok but at radio and os still nothing...
i try to put HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship at formatted Fat32 sd card and i renamed it .nbh to herming.nbh
please help me for a solution
thanks
Related
Dear all,
I've just erased PC Communication, by flash bootimage.
I don't know why. When I flash bootimage using itsutils, my PC Communication error, and cause USB/infrared can't connect.
The only one solution is flash ROM from SD Card.
I need CAB not EXE, so I can execute from SD Card.
Please help me.
Thanks a lot for your help
-----------
XDA I
WM2003SE
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
There is no Screen: 'SD Download' when flash ROM from SD
I have already follow this step, but when on step 8, there is no screen like this:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
On my device it's only :
WALLABY
Bootloader
V5.17
GSM OK
When I press one of XDA I button, there is no screen like that, so I can't still flash ROM from SD Card.
Please help me
Thanks a lot
--------------------
1. Download XDATools
2. Extract them at any place and run osimagetool
3. Select your Rom Image from the Source drop down menu.
4. Select your SD card (disk drive) from Destination the drop down menu.
5. Select Copy to start writing process and the tool should start writing to the card.
6. When XDATools has finished writing the image (no Infomessage) put the SD-card into your device
7. If there comes a message to format the SD-card select No
8. Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
9. Press action to download and it will start the download/restore from the SD card.
10. Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Click to expand...
Click to collapse
Re: There is no Screen: 'SD Download' when flash ROM from SD
I know the problem is.
My BootLoader is 5.17, and must have a card key in my SD Card to use it.
My question is how to write a card key to my SD Card, so that I can flash my ROM.
Please help me
Thanks a lot
Try bootloader downgrade
There are issues regarding re-flashing w/bootloader 5.17. I had a 5.17 too before and I tried downgrading to 5.15 that allowed me to reflash my ROM. Check this out:
http://www.romkitchen.de/
search for the topic "how to unlock your device" (Thanks to Lumpi for this one)
I have read also somewhere in the forum that allows a workaround to get pass the 5.17 bootloader, I just can't remember exactly where.
Good luck!
Re: Try bootloader downgrade
I've readed it, and downloading file from romkitchen.de is in progress.
Well, I can't downgrade 5.17 to 5.15 because my USB Connection on my XDA ROM was erased, so I can't downgrade from PC.
It should be downgraded by SD Card only.
My question is: In http://romkitchen.de there's option to download like this
How would you like your ROM?
installer EXE
zipped NK.nb1 (SD-card flashing)
zipped NK.nbf (advanced users)
I must choose zipped NK.nb1 (SD-card flashing). But is it included ROM 5.15?
IF it is included ROM 5.15, thanks God. But if not, it's useless..
Please help me...
Thanks a lot..
morph751 said:
There are issues regarding re-flashing w/bootloader 5.17. I had a 5.17 too before and I tried downgrading to 5.15 that allowed me to reflash my ROM. Check this out:
http://www.romkitchen.de/
search for the topic "how to unlock your device" (Thanks to Lumpi for this one)
I have read also somewhere in the forum that allows a workaround to get pass the 5.17 bootloader, I just can't remember exactly where.
Good luck!
Click to expand...
Click to collapse
Bootloader
Bootloader is different from the ROM. You can get Wallaby bootloader 5.15 from the ftp site:
ftp://xda:[email protected]/Wallaby/
Check this thread also:
http://forum.xda-developers.com/viewtopic.php?p=97306
This process worked for me. During that time (GSM error), I wasn't also able to connect to my PC thus downgraded my bootloader and re-flashed ROM via SD card.
Check this also
Hope this helps...
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=371&PN=1
Still problem: Can I format with MMC not SD?
Thanks for the tutorial.
I've already tried with my MMC 512MB.
But it didn't worked.
It didn't show "SD Download". There was nothing, only Diagnostic when entered Bootloader 5.17
Was it because of my MMC Card?
Should it be used SD Card?
I don't have SD Card, only MMC.
Can I use it?
Or, is there another solution for my problem?
I think, if there were a software for ActiveSync CAB on PDA, it would help to connect to PC, since my ROM couldn't connect to PC.
Or, is there any software to format MMC Card to be an SD Card?
Please help me
Thanks a lot for your support.
morph751 said:
Bootloader is different from the ROM. You can get Wallaby bootloader 5.15 from the ftp site:
ftp://xda:[email protected]/Wallaby/
Check this thread also:
http://forum.xda-developers.com/viewtopic.php?p=97306
This process worked for me. During that time (GSM error), I wasn't also able to connect to my PC thus downgraded my bootloader and re-flashed ROM via SD card.
Click to expand...
Click to collapse
Already Done. It worked. Thanks a lot
Dear all,
:lol:
I'm very happy today. It worked for me.
Thanks a lot for your support.
I'm great to be in this forum.
Thanks a lot.
At my explanation below, finally I found, I did wrong procedure.
I inserted my MMC when it was off, then full reset
In the tutorial, it was not mentioned detail.
The right procedure: insert SD/MCC when it is on, then full reset.
But anyway, it worked, I love my XDA.......
God bless you all.
samjeff said:
Thanks for the tutorial.
I've already tried with my MMC 512MB.
But it didn't worked.
It didn't show "SD Download". There was nothing, only Diagnostic when entered Bootloader 5.17
Was it because of my MMC Card?
Should it be used SD Card?
I don't have SD Card, only MMC.
Can I use it?
Or, is there another solution for my problem?
I think, if there were a software for ActiveSync CAB on PDA, it would help to connect to PC, since my ROM couldn't connect to PC.
Or, is there any software to format MMC Card to be an SD Card?
Please help me
Thanks a lot for your support.
morph751 said:
Bootloader is different from the ROM. You can get Wallaby bootloader 5.15 from the ftp site:
ftp://xda:[email protected]/Wallaby/
Check this thread also:
http://forum.xda-developers.com/viewtopic.php?p=97306
This process worked for me. During that time (GSM error), I wasn't also able to connect to my PC thus downgraded my bootloader and re-flashed ROM via SD card.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Nice to hear that
Nice to hear that samjeff. Let's all continue to enjoy our old, old Wallabys.
ok i am totally new in this row thingyy
i have downloaded this rom :OS 5.2.20273 (Build 20273.1.3.3 PV DVH) Diamond(Full) V19
my current rom is :1.20.305.3
radio version is : 1.47.00.10
protocol version : 32.80.7020.20H
extrom version : 1.20.305.104
no the question is is this rom ok for my jasjam if yes how to install it
and if no then which one is better ?? same how to install it help me plzzz
Yes its ok...
1St read this - http://forum.xda-developers.com/showthread.php?t=296722
then INSTALL HARD SPL V7.....(check out page 116, post 1160 to use the sd card method - I find it safer and have no sync problems unlike usin the pc). Just make sure you have more than 50% battery power if you use the sd card method.
Then you can install your new OS. just unrar/zip the file. sync your phone with active sync and double click on the RUU_Wrapper.exe file... Follow the prompts...
I prefer the sd card method, I find it safer. This is slightly different than installing Hard SPL using the sd card...
1). Format a 2GB or lower sd card fat32. Copy the RUU_signed.nbh onto it and rename to "hermimg.nbh".
2). Insert sd card in phone and go to bootloader (hold power button, OK button above flywheel and reset with stylus. Hold until you get to tri-colour screen).
3). It should recognise the Hermes flash file, just follow the prompts.
YOU NEED TO HAVE HARD SPL'ED YOUR PHONE TO DO THIS.
Happy Flashing & Welcome...
Hi guys,
i'm new here and new to the Hermes and window mobile....
so, i want to upgrade my wm6 to wm6.1 but I'm stuck here...
i want to try myself but i dont want to make a mistake....
i already read and do the hard-spl guide http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26 ( my spl already 2.10.olipro )
and read through the ROM Upgrade Guide http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
wat should i do now? I'm totally confused.....
sorry and thx in advanced
I think I had similar problems when I started...
Make sure you have microsoft .net framework installed...
Linky...
Version 2.0 will do...
argentocruz said:
I think I had similar problems when I started...
Make sure you have microsoft .net framework installed...
Linky...
Version 2.0 will do...
Click to expand...
Click to collapse
already installed but it not fix the problem....
Use the sd card method.
1. Backup sd card - format FAT32. Copy .nbh file onto it (from rom you want). Rename .nbh file to hermimg.nbh . SPELLING IS IMPORTANT...
2. Insert sd card into Hermes and reset into bootloader - hold power, ok button above flywheel and reset with stylus. Hold ALL buttons in until you get to bootloader.
3. As long as you have Hard SPL V7 installed it should work, follow the prompts.
The sd card MUST be 2Gb or less, it must be formatted FAT32 (default is FAT) and you MUST have both a charged battery and Hard SPL V7 installed.
Cheers...
i downloaded the a WM6 software and the ruuwrapper and the Hard Spl v7. I flashed it but nothing happened . Need help
Hold down power button, ok button and reset with stylus. Hold in until tri-colour (bootloader) screen comes up. This should tell you what SPL you have. Should be 2.10 oli...
If you have Hard SPL installed, you can use the sd card method to flash your rom. This is a must if the radio rom is part of the rom you are flashing - generally only in stock roms.
You must have a 2Gb or less sd card formatted FAT32.
1. Format Sd card FAT32. Copy .nbh file on and rename to hermimg.nbh.
2. Insert sd card in Hrermes and reset to bootloader.
3. Follow instructions.
Easy as 1,2 & 3....
Cheers...
Okay, so today I purchased a Hermes. While it'll take a while for it to arrive, I want to be prepared. And I certainly don't want a brick. So I'm pretty paranoid. That's why I'm asking, is the following procedure correct? (It's basically what I found here)
Download HardSPL
Download the ROM
If I have HardSPL (which I doubt), skip step 4
Install HardSPL
Sync and connect (with USB-cable) using WMDC*
When sync is finished, run RUUWrapper.exe
Follow the instructions (accept, next, accept, next, update)
Flash
Sync and connect (with USB-cable) using WMDC*
When sync is finished, run RUUWrapper.exe, the one shipped with the ROM
Click AutoDetect
Follow the instructions (accept, next, accept, next, update)
"Enjoy my updated device"
Download and install the .cab-files provided by Torben here. (Or should I change the registry?)
*I've read that there are some problems when syncing with Vista (which I, against my will, is stuck with), is this still present when using WMDC instead of ActiveSync?
Thank you for taking time helping a confused noob!
Mate, if you have a problem with using the PC, use the SD card method (must have Hard SPL V& installed - SPL - 2.10oli). To install Hard SPL using the Sd card method, go to page 116, post 1160 on the Hard SPL thread. It has links and the method to install hard SPL using the sd card method.
For ROM's use this method -
1. Format sd card (2Gb or less) FAT32.
2. Copy .nbh file of the rom you want onto sd card and rename to hermimg.nbh .Insert back into Hermes.
3 Put Hermes into bootloader - hold power, OK button above flywheel and reset with stylus, hold ALL buttons in until you get to tri-colour screen. If you have done everything right, follow the prompts.
Cheers...
But then I would have to buy an extra memorycard for the outragous prices of $7. But, I suppose I'll have to... Thanks for your reply!
Horrors......
Okay, I read the post. Very good! Just to make sure, I should not copy the RUUWrapper bundled with HardSPL? I add SSPL_HERM.exe and HERMIMG.nbh to the root of the newly formatted (FAT32) SD-card (not SDHC), run SPPL_HERM.exe from the phone, press the powerbutton when instructed to (to flash) and then reset the device somehow, once it's done. After that, follow the instructions here (phone connected to charger since it takes 30 min) and then all be fine?
(Yepp, I'm a pretty paranoid creature)
I just thought I'd reply to this message because I'm about to flash a custom Rom to a new iMate Jasjam and that my user id is errily similar to yours
I've used a 2GB Micro SD card to flash my last ROM upgrade (thanks to CRCinAU) and it worked a treat.
Cheers!
Oggy.
On my device (MDA Vario II) it stops at the bootloader screen (tricolor), and nothing happens.... but my device is not bricked, if i call softreset everything works, but i need hard spl to use an unlocker .... (which is also not working right now)
Did you run sspl.exe from the phone first?
You need to run this as it puts Soft SPL on so you can flash Hard SPL BUT you need to run it from the Hermes and not the sd card.
To get out of bootloader just reset with stylus.]
Also check that the sd card (2Gb or less) is formatted FAT32, comes formatted FAT by default.
Make sure you have renamed .nbh file to hermimg.nbh. Spelling matters...
Cheers...
jep done as instructed, still the same problem
What happens if it's not formatted FAT by default? If I can format a card as FAT32 but wasn't FAT originally, would it possibly brick it? (Not doing it (hopefully), just curious)
okay got it, cards broken, i think, used a new one
Doesn't matter if it was originally FAT32, most sd cards come formatted FAT by default, it has to be FAT32 or the flash WON"T work...