Upgrade X7500 from WM5 to WM6 Original WITHOUT unlocker ? - Advantage X7500, MDA Ameo Upgrading

Hello all
I have one question which is not found an answer
Can I Upgrade from WM5 (It) to WM6 Original (Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship.exe)
Without use UNLOCKER to become SPL-v1.20.00
Many black screens and I am scared from this problem. I have this fantastic device only one week ....
I apologize for my bad English .
My bootloader is :
athe100
ipl-v1.00
Athe100
SPL-v1.07.00
Thanks in advance !!!

Related

Upgrade Issue ...

Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
skunknet said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
JumpSPL only works once, you have to run it prior to every Rom uopgrade you want to do.
The "New WM6 Upgrade Guide" is based on an other method, namely HardSPL instead of JumpSPL. The advantage is that HardSPL stays resident (until you flash another SPL) so you don't have to bother again with the SPL issue every time you want to flash.
So, if you are aquainted en comfortable with the way you did your first upgrade: Run JumpSPL first and the RUU afterwards, do it again with your new upgrade attempt. The result is the same, it's only one step more to execute.
Try~~
skunknet;1806937 said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
HERE:
http://forum.xda -developers.com /showthread.php?t=353547
enjoy ~~~
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
skunknet said:
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
Click to expand...
Click to collapse
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Sorry...
rondol1 said:
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Click to expand...
Click to collapse
Sorry for the broken link in the previous post
Please have a look here:-...
http://forum.xda-developers.com/showthread.php?t=353547
hope it helps~~ ^_^
Many thanx guys ...
i've upgrade successfully my G4 device to WM6 ....
I've upgrade to Prophet Touch VIII using jumpspl ....
Many thanx at all for information ....

German Firmware for HTC Touch dual *nike*

Hello,
maybe someone can help. I need to change the language of a new HTC TOUCH DUAL NIKE from Italian to German. I tried already with a RUU firmware but it seems to old. Do someone have a new firmware in German ?
Thks in advance.
Roland
http://forum.xda-developers.com/showthread.php?t=384924
MCS
Hi,
thks for the advice.
I downloaded WM6.1 GER Niki netDrg BR but it does not work. There comes always error 262 (update error).
The actual version is:
ROM: 1.31.408.09 dated 30/10/07
RADIO: 1.58.16.27
PROTOCOL: 25.61.30.03H
EXTROM: 1.31.408.8601
Maybe you can help me further.
bye
roland
Unzip the *.exe and try again!
Flash without Sim and SD Card.
MCS
Hello,
thks, but the same problem. On the phone's display it writes 0% and then the error comes. Phone is still ok but firmware does not match on this phone.
maybe you find a solution.
thks
roland
Read the Threads ... without HardSPL you cant Flash a Cocked Rom. If you are sure, you have a HTC Niki and not a HTC Neon??? If you dont know this ... read wiki!
Hi,
it's a HTC TOUCH DUAL 5520 ITA. Should by Nike ?
How is USPL or Hard-SPL done ? From the link you postetd I could not understand.
bye
Roland
So what's unclear? In this thread it's all desribed perfectly in my case!
SoftSPL, USPL and HardSPL for Nike
Hi,
perfekt! With the new bootloader it flashed immediately.
Many Thks.
roland

Help with WIZA200 upgrade

Hi Guys,
I have a WIZA200 (Telstra Australia Version) with ipl 2.21.0001 & spl 2.21.olip on it.
I need to upgrade to WM6 and need to know what file I need to get and english version that is stable.
Please help!!!
Try this out .. I am using it since a month without any problem.
forum.xda-developers.com/showthread.php?t=494802
Rock On

Can i upgrade my phone with a new Rom?

Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
yes, you can
o0opaniko0o said:
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
Click to expand...
Click to collapse
hi, yes, you can flash a new rom, but first of all, read , read, read and then read again, the process is very simple once you have readed the faqs (stickies)
good luck !!!1
Thanx for your answer!
I´ve read the Wiki and the sticky´s in this forum, i´ve searcht for my IPL/SPL Build and read this topics too.
But i´m unsure.
In the past (when the Wizard was new for me) i´ve read that the IPL/SPL 3.08.0001 (AKU3) wasn´t possible to upgrade .
Now i can´t find anything about that but i´m unsure.
Then i´ve read about Soft an HardSPL Flash but what is the best for me?
I´ve read that SoftSPL was better if you have warranty on your phone but my phone havent any warranty because it´s to old.
Should i use HardSPL to permanently remove the CID lock (then i should use only G4Save Rom´s - Right?)?
So Steps i want to do now to upgrade my Wizard :
1 . G4 Hard SPl CID unlock
[Solution] G4 Hard SPL (CID unlock)
But this tutorial say´s (After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip) can the IPL 2.21.0001 boot the "old" AKU3 T-Mobile Germany Rom or must i update the rom with Mun's RUU imediatly?
2. I Update the rom with Mun's RUU after i´ve read this ROM Features, Ratings, Information and Program List topic to chose the best rom for me, G4 Safe only!?
Right or have i forgot some steps?
It´s done,
i´ve read some topics again and again und then i used the SoftSPL CID unlock and flash my wizard succesfull.
Thanx!

HTC x7500 rom with wrong SPL..

Hi all,
Could anyone help mi with this thing? A few days ago I bought a HTC x7500. Previous owner want's to change a rom language and.. he put there rom with wrong SPL (3,5) it should be 1.10
I can enter to the bootloader and it shows me that:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
and that's all I can do
I'm assuming that I have to find a rom with a proper SPL version which is 1.10? ( that's right?)
I will be grateful for all advises from You guys.
Cheers
______
My device is CID Locked.. F08 - Denmark
Mtty - task 32 = level =FF
Solved
Check out my post http://forum.xda-developers.com/showthread.php?t=2172291

Categories

Resources