Hi all,
Could anyone help mi with this thing? A few days ago I bought a HTC x7500. Previous owner want's to change a rom language and.. he put there rom with wrong SPL (3,5) it should be 1.10
I can enter to the bootloader and it shows me that:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
and that's all I can do
I'm assuming that I have to find a rom with a proper SPL version which is 1.10? ( that's right?)
I will be grateful for all advises from You guys.
Cheers
______
My device is CID Locked.. F08 - Denmark
Mtty - task 32 = level =FF
Solved
Check out my post http://forum.xda-developers.com/showthread.php?t=2172291
Related
Hi there, my first posting after reading here for a few days...
I got an T-Mobile Ameo which identifies its IPL and SPL like this (in Bootloader Mode)
ATHE100
IPL-1.00
ATHE100
SPL-1.06.0000
I am a little bit confused since I could not find any other person/posting which reported this SPL version of 1.06.
What do you think about this? Is it just normal or do I have to do some precaution measures before CID-unlocking, SIM-unlocking and flashing?
Greetings, forcemaker
Upgraded to T-Mobile WM6
... with the "original" Upgrade Tool, all fine for me; I also figured out that my PrePaid-Provider "Congstar" is D1=T-Mobile net, so I do not even have to SIM-unlock.
All's fine
So this low SPL version which I couldn't find in combination with "ATHENA" so I was guessing if this was a "too old" version.
CU, forcemaker
Hi
I also have this SPL with small differance SPL 1.07
Have you SUCCESSFULY unlock with OLIPRO unlocker
and this ""original" Upgrade Tool," from where is this
Best regards
just used the T-Mobile WM 6 ROM
Hi GSmart,
I did not unlock the device nor SIM unlocked, so I cannot tell whether it will do the job for you.
I used the ROM from T-Mobile Germany (Deutschland, short TMD). As I did not need any modification - I just wanted it to work stresslessly - I just flashed the ROM with the Update tool that was supplied with the download. As far as I got it, it is the original upgrade tool supplied for providers and customers(?).
You can find the original ROMs in this Thread:
http://forum.xda-developers.com/showthread.php?t=334512
I myself used "German - T-Mobile Ameo" which is:
http://rapidshare.com/files/73352583/Athena_WM6_TMD_2.35.111.3_By_Agent_Bignose.zip
So, if any modified ROM which needs unlocking, will install fine? Don't know. Maybe you could upgrade with an official ROM and automatically with the supplied SPL version and then do your personal upgrade.
But ask here in the forum, I cannot answer this.
Good luck!
1000 times thank you for your attention
Hello all
I have one question which is not found an answer
Can I Upgrade from WM5 (It) to WM6 Original (Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship.exe)
Without use UNLOCKER to become SPL-v1.20.00
Many black screens and I am scared from this problem. I have this fantastic device only one week ....
I apologize for my bad English .
My bootloader is :
athe100
ipl-v1.00
Athe100
SPL-v1.07.00
Thanks in advance !!!
dear friends,
I have a HTC with japanese language. and I wnat to upload a wwe rom.because the rom is japanese. I downloaded upgrading rom RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10 _108_Ship.exe
but can not upload it, allways geting error [294], pls I need urgent to converet this device into wwe rom. any help just urgent need.
regards
phone info:
HTC HERM200 (X01HT) SOFTBANK
ROM 1.33.761.9
DATE 07/05/07
RATIO 1.46.00.10
IPL-1.01
SPL-2.03
I played with it but now in bootloader mode SPL shows 1.11
I can not do hard-SPL too at all
You needed to do some reading about the softbank, these are a major problem to unlock and upgrade depending on what version you have. In all likelyhood you have bricked your Hermes.
Do some research to see but most people don't like to give advice on the softbanks as no one likes to be responsible for the death of another persons Hermes....
I already read all the forum but could not find any solution, many document and post read about softbank, but never could upload WWE rom
hope someone will explain a proper way..
regards..
I have a Advantage X7501...
after i flash RUU_Athena_DOPODASIA_WWE_2.19.707.4_1.45.00.10_Ship.exe ROM without HARDSPL it keep stuck in the bootloader.
actually i want flash my ROM from 2.19.453.4 to RUU_Athena_DOPODASIA_WWE_2.19.707.4_1.45.00.10_Ship.exe. OMG T.T
I need to flash back it to 2.19.453.4 ?
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
I don't know what to do anymore... T.T please anyone can help?
sorry my english is bad...
My problem is the same.What going on with you problem.Are you fixed this.
My IPL and SPL is the same.
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.0000
solution
please follow the MAC and MTTY solution provided in other threads.
after following that procedure, install any ROM with SPL 1.2.
u r done.
any one try this solution
ERMANO.ESTE said:
please follow the MAC and MTTY solution provided in other threads.
after following that procedure, install any ROM with SPL 1.2.
u r done.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=528259
Based on my experience, if there's still ATHE100 on the bootloader screen, there's no need to use the model id/wifi fix.
You just need to find the right official ROM for your device first (if not HardSPL)... if I'm not mistaken, X7501 CID is HTC_001 and not DOPOD01. Please try flash the device again with US official WM6 ROM version first as located here for X7501 : http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades
After your device is recovered, please make sure you HardSPL it first BEFORE flashing other ROMs.
Wish you all the best.
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
yes, you can
o0opaniko0o said:
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
Click to expand...
Click to collapse
hi, yes, you can flash a new rom, but first of all, read , read, read and then read again, the process is very simple once you have readed the faqs (stickies)
good luck !!!1
Thanx for your answer!
I´ve read the Wiki and the sticky´s in this forum, i´ve searcht for my IPL/SPL Build and read this topics too.
But i´m unsure.
In the past (when the Wizard was new for me) i´ve read that the IPL/SPL 3.08.0001 (AKU3) wasn´t possible to upgrade .
Now i can´t find anything about that but i´m unsure.
Then i´ve read about Soft an HardSPL Flash but what is the best for me?
I´ve read that SoftSPL was better if you have warranty on your phone but my phone havent any warranty because it´s to old.
Should i use HardSPL to permanently remove the CID lock (then i should use only G4Save Rom´s - Right?)?
So Steps i want to do now to upgrade my Wizard :
1 . G4 Hard SPl CID unlock
[Solution] G4 Hard SPL (CID unlock)
But this tutorial say´s (After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip) can the IPL 2.21.0001 boot the "old" AKU3 T-Mobile Germany Rom or must i update the rom with Mun's RUU imediatly?
2. I Update the rom with Mun's RUU after i´ve read this ROM Features, Ratings, Information and Program List topic to chose the best rom for me, G4 Safe only!?
Right or have i forgot some steps?
It´s done,
i´ve read some topics again and again und then i used the SoftSPL CID unlock and flash my wizard succesfull.
Thanx!