Related
i'm a newbie
i'm to excite to upgrade my new 818 pro G4 WM 5 which i bought last week..i read few post regarding on how to upgrade into WM 6..then..
1stly i've tried the upgrade package,click the hardSPL,works well after that..but i'm quite lost for step 3 & 4..so i just stop there..
i noted that my SPL change into 2.G4.4PDA
then i read korand post, bout that new rom..i've tried it & it works well,my 818 pro with WM 6..
at the same time, i try to upgrade my IPL into 2.20 but after download it,my avast detect trojan in it..so i just leave it
then i read bout crystal rom..get so excite with the features & function (also the touchflo)
so i upgrade it..
now is the problem..
after i make the hard reset (camera button, comm button & on/off (soft reset button) & reset button below(next to usb/cable slot)..
i STUCK in boot screen which shows
IPL 2.15.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 6.0.0.255
it just stuck there,no led light..
i've tried upgrade rom back to normal,but no avail as my activesync cannot detect my device.
i've tried the hard reset for few time,yet nothing happen..still the same
searchin for help in wiki,yet still no solution or maybe i'm to panic
plz help me to restore it,or maybe make it alive as normal again..
Finally !!..i've made it
for overnight i searchin & lookin how to restore my device..
(not enough sleep )
this is how i do it instead doing the usually hard reset..
my device is on & the usb cable from my device connect to laptop..
yet still stuck at the boot screen..then
i press the green button (to make phone call) + comm button + soft reset (on/off button) all a the same time (those 3 button only)
then my screen turn into 3 different color..red,green or blue (i dont quite remember already hihihi)
so, i use the 'korand' rom update utility to restore it..with his wm 6 rom
waallaa..my 818 pro is alive again...with wm 6 !!
thanks to korand for his rom, or from whomever the contributer..thank a lots !!
i think i still wanna upgrade into different type of rom..
but my SPL looks different then normal SPL i've see..
SPL 2.G4.4PDA
can anyone could lead me where can i get IPL G4.zip free virus?
well, hope this post could help others who face the same problm as mine..
next time i'll be MORE carefull..
bye..
duato said:
for overnight i searchin & lookin how to restore my device..
(not enough sleep )
this is how i do it instead doing the usually hard reset..
my device is on & the usb cable from my device connect to laptop..
yet still stuck at the boot screen..then
i press the green button (to make phone call) + comm button + soft reset (on/off button) all a the same time (those 3 button only)
then my screen turn into 3 different color..red,green or blue (i dont quite remember already hihihi)
so, i use the 'korand' rom update utility to restore it..with his wm 6 rom
waallaa..my 818 pro is alive again...with wm 6 !!
thanks to korand for his rom, or from whomever the contributer..thank a lots !!
i think i still wanna upgrade into different type of rom..
but my SPL looks different then normal SPL i've see..
SPL 2.G4.4PDA
can anyone could lead me where can i get IPL G4.zip free virus?
well, hope this post could help others who face the same problm as mine..
next time i'll be MORE carefull..
bye..
Click to expand...
Click to collapse
I just have one thing to say you play with your "IPL" when you don't know what you are doing and you brick your phone for real !! and I mean you will brick it as like it wont even turn on !! don't think about playing around with IPL. your SPL is fine. it's HardSPL now. you can upgrade other roms, just read the wm6 guide , follow step by step and you will be fine.
one more time, if you like your device and you want to keep it (and use it) don't play around with it's IPL
true..totally agree with you..
well, i guess i do like this kind of tech..i'm fast learning (usually from mistakes) risk always be my companion ..
one thing i'm curious about..if i want to upgrade to any other roms, should i upgarde my IPL 1st?..just like i try to use your personal crystal rom..why didnt i make it well, even though i follow the instruction step by step?
After i using those Korand's rom..everything is fine except my battery !!
i charging it & i notice that my device is getting hot !!..
i know this is not well..so i need to upgrade into others roms which more suitable with my device..
Thanks hma4 for your concern
___________________
HTC Dopod 818 pro
yup..better dont disturb the IPL
on second thought,it wisely not to disturb the IPL as you've mention except for those a genius
bout the battery,after few reset.. it back to normal..no hot anymore
i think i better stick with this rom for awhile.. as it is nice,stable & fast..+ more xtra storage..
In general, just leave IPL and SPL alone. Most ROMs (except WM5) work regardless of IPL/SPL and it's better to avoid bricking/damage.
Hi,
In Every ROM with WM6 and WM6.1 I got this trouble.
My QTEK S200 works fine with MW5 , when I install a WM6 ROM the sound dissapear.
First my QTEK S200 (HTC Prophet)
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
2 GB SD
Software Installed:
Coreplayer 1.1.0
SPB Weather 1.0
Oxios Memory 1.40
Battery Status 1.04.203 beta4
Windows Live for Mobile 10.6.0033.0600
How this happen...
1.- The Sound dont work, The Speaker.
2.- I can recibe call and call. But incomming call theres no sound only Vibration.
3.- When this happend I try to Open CorePlayer or any software for media and give a error " Wave Output: Devide Error !"
4.- Reset , the sound come back but...
5.- After this the ENDCALL Button works bad, after pressing this sound like a chime.
I got to rollback to WM5 and the trouble never come again.
I try a lot of things Reset, Flash , Reflash , Another ROM , bla bla...
And I confirm this only happen with WM6 and now WM6.1
I Think this is a software trouble , no hardware because when I turn the Volume down the weird Chime Sound go down too.
Please Gullum , HMA4 , Korand, Cloudyfa ... help me ... I dont know what to do ...
Seems only you have this problem, try to read step by step guide to upgrade again then flash to Korand 2.6 WWE, if the problem still happen, it must be your hardware problem.
IN your signature :
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
How can Korand 3.1 using SPL 2.20.0001 ??? when using korand 3.1 the SPL should be 2.g3.4pda.
To me it seems to be a software conflict. Try to keep your ROM clean after a reflash for some time. If you have this problem without any additional software installed, then the problem is with your Prophet (as you being the only one reporting) but I can't imaging because things work fine with WM5.
So give it a try and don't install anything exept your ROM.
@tb:
He probably used JumpSPL to flash, that utill don't change the SPL but bypasses it only once.
Looks like a radio Problem. change your radio, I think it will help just give it a shot ..
thanks guys
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
gzprophet said:
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
Click to expand...
Click to collapse
Hi, I can the same problem. I have korand 6.1 WW3. This problem is the same with Shadow (all version), Korand, etc. Do you find the problem? Im sorry for my poor english.
I have the same problem. It's not a big deal - happend only once or twice and after softreset the problem is no more. Using Konrad's 2.5.
Another problem that's more of a pain in the ass is that my prophet hangs once in a while. At times, when I press the power button to get it to standby mode it just won't turn back on - I have to soft reset it.
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
l3v5y said:
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
Click to expand...
Click to collapse
Yup, and we are pretty much aware of it But the guy was just pointing out the problem, so saying what you have said is quite pointless. Let's just try to work out the problems we can work out and try to "live" with the rest.
My comment was more about this:
Another problem that's more of a pain in the ass is that my prophet hangs once in a while.
Click to expand...
Click to collapse
me and my brother changed to WM6 and we both get the same problem that the sound goes off after some while and then i have to soft reset and then the sound comes back ,, this is a serious problem please try to find a solution
thank you
What ROM did you upgrade to?
Again ...
Hi , me again ...
I do a hard reset , work some days with a clean rom and the problem appears again ...
Clean ROM = No Sync, No Soft , No Apps , no Nothing !!!
A lots of tests ... So I Confirm that this problem is the ROM maybe the OS , some driver etc. WM 6 or WM 6.1.
I try to work some days without a SIM and the problem never come ... Maybe this can use as a clue for a solution.
I dont know what more I can do...
If HMA4 , Korand, Gullum or Cloudyfa need me as a tester for a solution to this problem I do it ..
Hi guys, I am experiecing the same problem.
Mine is a Dopod 818pro with SPL 2.20 and Radio ROM 2.69
Please advise your ROM versions to see if any clues.
Please Help !
Gullum, Cloudyfa, Korand, Hma4 and others developers ... please help us
I know of this problem with some builds and the workaround is to goto phone > menu > options and set kaypad of so no sound comes when pressing the numbers of the dial pad. some builds have the problem of disaparing sound after pressing in about 30 - 40 numbers on the phonepad.
Thanks Gollum
Thanks Friend...
So , you tell me if I turn Off the keypad tones the problem dont come back ?
But what about the Chime Sound when the Endcall button is preset ?
In my phone i Got the weird sound of the endcall button after the problem of the sound goes away ... a Soft Reset and the weird sound come ..
If you want in some solution for this I wanna help you as a tester..
Thanks again gollum
It sounds I was caught by the same problem, at least by looking. I got no sound from my phone speaker now. This happened after I try to play music through the Nokia BH801 BT headset. I installed a bunch of program but none works, and i lost sound after I installed BT 3900. Don't know if that's the reason, but I couldn't access bluetooth manager through BT 3900 indicating " insufficient memory". Plus, I got two BT icons in "connection" page now
I would like to remove BT 3900, but wasn't able to locate the file. I read the Enable_MS_BT.cab could do the job, but just can't find the file.
Please give me some clues to solve this frustrating problem. Thx a lot
...
I think that your problem is other ...
But why you dont try a Hard Reset, if the problem is Logical or Soft Driver , a Hard Reset maybe can be the solution ...
Try this ... and see if your Speaker come to life again.
so what is the solution ,,, now more than 10 people have the same problem but no solution????????????????? (((((
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse
--------------------------------------------------------------------------------
i have a big problem in my pocket pc
htc 3400 (gene100) when i install LEngLite6.exe
- a translaion program - the pocket pc make a softreset and didnt complet the reboot every
time i made reboot dont complet it is pause in htc
screen and some information:
( ONBL 1.10.0000
SPL 1.10.0000
GSM 02.79.90
OS 1.7.0.0 )
PLEAS HELP ME FOR SOLVE THIS PROBLEM
AND DONT FORGET ME
try hard reset! n dnt post ur queries here in new posts post dem
http://forum.xda-developers.com/showthread.php?t=523175
here!!!
thank u
thank u
and who i can make a hard rest if it use