Hi All
I have a G4 which I think is CID locked.
IPL 2.21.0001
SPL 2.21.0001
I have managed to get a number of different WM6 ROMs in
and 'sort-of' working. The reason for the upgrade is to get A2DP
working with my nice Motorola S9's. All of the WM6 ROMs give
me A2DP, however 'Contacts' does not work on any of them.
The Contacts screen flashes up for a moment then closes.
I have tried Titan V2.0, TNT 4.0 and SeeNoEvil ROMs
Any ideas? Thanks in advance.
JayDee
Try install contact manager iphone v 0.11 . The built-in manager is crap. Really
Hi
I got Pocket CM 0.7 and that does the same thing.
Thanks
It is known that restoring WM5 contact database to WM6 device does not work. You should use a backup program that does not backup the contacts database directly, or to backup with ActiveSync+Outlook.
Hi
Thanks for the reply
I am not trying to restore my contact list, I am trying to launch
'contacts'.
I have gone to \Windows and 'tapped' on addrbook.exe and
that does the same thing. The 'contacts' screen pops up for
a moment, then shuts down again, as though looking for a
.dll that isn't there. 'Calander' and 'tasks' work fine so I am
sure 'poutlook.exe' is working, it's just 'contacts' that doesn't
work.
Does any "super-softie" know what files addrbook.exe needs to
open/touch in order to run?
Jaydee
Hi.
I had the same problem as yours.
I am also using a 2.21.0001 G4 CID locked.
Also the Windows Live Messager only flashed but not really running. The way to solve this is very simple.
Just do a hard reset. After that you will be able to use both msn and contacts.
You are welcome
I have about the same wizard as you.
I tried to cid unlock it but i still get the same spl and not the olipro one.
Any idea?
Thanks.
I have a Hermes 300, it was bought second handed, and had a problem of blocking the password for acessing the PDA sayng it was wrong all the time, even whem right...
I upgraded SPL to 2.10.Olipro and installed schap´s WM6 3.54 ROM, it all atays the same.
I have also a problem of GSM service. The PIN never shows up so I can´t connect to GSM service.
Can anyone please help me on this one?!
I´ve installed a new Radio Rom with Actuvesync and SSPL and sometimes it works on GSM sometimes it doesnt work....
Sometimes I have the No GSM sign too.
Hello all,
I Eb'd an HTC wizard (cingular 8125) running Wizard Love/NBD WM 6.
On the load screen I get:
AKU 2.3;
IPL and SPL:2.25.0001;
radio:2.25.11;
rom: 6.0.0.0.
My carrier is Tmobile.
Question 1: If my phone has this newer ROM and it takes calls on the Tmobile network it has been CID unlocked and SIM unlocked...right?
I wanna update my rom and think that I am competent enough to do so but there is alot to learn and this is not my full time gig...right.
Question 2: So, if I am correct in Q1 I should be able to flash roms right?
However when I attempt to do so the RUU gives me [error 224]. Active sync and or WMDC says its connected. (I installed the AS drivers in WMDC)
Question 3: Where do I go from here?
Question 4: The wi-fi is currently not working will a new rom potentially clear this up?
Thanks in advance for the time and advice..
grazie
hmmmm,
Well,did you updated to NBD wm6 yourself ? and how did you updated ? which method you adopted ? SoftSPL or HardSPL ?
You say its SIM unlocked as it takes calls on the Tmobile network .Did you SIM unlocked with lokiwiz03a ?
yes ! a G4 can be SIM unlocked but it can not be CID unlocked,however,it can be upgraded to wm6 rom,but with method either 'SoftSPL' or 'HardSPL'.With your present ipl/spl 2.25.0001 and you say its NBD wm6 running,then it must have been upgraded through 'SoftSPL' method,as it uses patched ipl/spl and Cid unlocks the phone temporarily,but it never permanently CID unlocks the phone.But with 'HardSPL' ,it changes the ipl/spl to a patched ipl 2.21.0001 and spl 2.21 olip.So everytime you want to upgrade,you'll have to upgrade using 'SoftSPL' method.
could you elaborate a little more about this.
Cheers!
Hey thanks for the correspondence zabardast_1, I have been getting frustrated and I have many times contemplated going for the brick or bust approach here.
So, I have done none of the updating on this rig. I rec'd it and I wanted it primarily for wifi however I can't get the wifi card/ (sdiowlan I believe) to even recognize an AP (... I posted in the networking forum but no response.) Thus my own reasoning leads me to believe I should start from scratch with a new rom unless you know of something else.
So, I am not the most savvy and thought that all of the info I had led to SIM and CID unlocked. I just read otherwise last night and in your reply. The info I have provided is accurate the IPL, SPL, radio, although I don't know which NBD release it is; just says 6.0.0.0 and release date: 2/2/07.
I am trying to get the new rom on the my device however and I would've probably already bricked it if I could get an RUU to communicate with my wiz. I always get [Error 224] when I run it and my phone is connected through active sync. I am running vista but have installed the AS drivers for WMDC. I also tried it at work the other day with XP same situ. I then tried flashing from the bootloader screen with an NBD, Wizard Love ( w/ Italian installer?), and T-mob (226102_22610105_022511). The only one that says it will update is the Tmob ROM, however I got cold feet at the update button and canceled.
Other funny stuff I have observed that may or may not be related to the problems I am having are:
Can't install cab files ie (enable rapi or Cert SPCS) and Wiz Sys Tools couldn't read my CID block and hard_SPL G4 gives me REXX error ( SPL_Version has no value).
So, any wizdom you or anybody can drop is much appreciated and needed at this point.
Whew...
Listen carefully. G4 Wizard cannot be CID-unlocked without paying money. (And yes, you are using a G4).
What you need now is to Flash your original stock carrier ROM (Or wizard love) to get your OS back. Then either use SoftSPL or install HardSPL and flash WM6 ROM.
Thanks Starkwong,
I will try installing wizard love tomorrow at work and if that don't work I will attempt a Cing ROM (will all of these work or do I need to mind my G3's and G4's for these???)
Grazie
So, It worked using Wizard Love at work and out of the bootloader window. Now I need to:
1.) Get wifi working.
2.) Get a newer ROM
I put a post up in the networking thread, I am a tool so far as these devices are concerned so be easy on me.
http://forum.xda-developers.com/showthread.php?t=372811
So do I get the wifi issue resolved before I reflash???
Thx again
I don't know what you mean by "wifi not working".
Maybe it is the wifi AP doesn't allow 11Mbps (802.11b) connections?
However, going to any of the WM6 ROMs should already set the registry to allow Wizard connects to G-Only APs. Just use HardSPL/SoftSPL and flash a WM6 and you will see.
OK so "wifi not working" may indeed be a general statement...
What I mean to say is that I am not able to connect to any wireless networks for internet not home (Linksys WRT 54G v5 with ddwrt firmware) or school (university wide) or my city's wifi network. It won't even detect them at least none that Ive seen since I've rec'd this phone. So, that is what I meant by the ambiguous statement.
So, being as your last post was a success I will try as you say and post the results tomorrow. Thanks again starkwong!!!
1 quick thing however, to be sure, I can now try the hard spl or soft spl method of tricking my phone to run an upgrade to WM6?
Still not able to get wifi APs????
OK although I have been successful at reinstalling the Mfg ROM and then Hard SPL'ing my wizard thanks to ya'll I still am unable to connect to a wireless network (see one even). I have the Olip on my SPL and I installed a TNT version of WM6 and I am still at work (drunk but still here). Anyway I can't see my wireless AP and I am beginning to think its a hardware issue if thats possible, i dunno the dynamics of this system maybe thats why it was for sale. In any event as usual I am willing to try what ever you guys throw at me as you're my only hope obi wan. Alright Im gonna go home for the night and try getting on to my home network.
Thanks again for all the help guys.
Is your device a original one from phone operator? I suspect your device is a China Dopod 838 with replaced casing, because the China version has the wifi hardware removed, so wifi can't be started even if an English ROM is used.
Looks to be authentic 8125
Starkwong, the Cingular logo and the 8125 model # are on the phone case where they have been when I've seen them before in pics. Therfore, I dunno I guess it looks like every other 8125 I've seen. Can I check the SN, IME or anything to be sure?
Thanks Again!!!
Starkwong,
I am getting all the options for wifi on my phone the LHS LED flashes green when I enable it and alternates blue green when BT is enabled. So, could it still be that its a dupod? I dunno but I am going home for the night... Thanks for your help. I will try connecting to my home network when I get there.
Hey,
I was given a Softbank X01HT from my brother and I've been using the information on this site to try and get the phone up and working on the Three network in Australia. This site has been really informative and I managed to do a lot of upgrades to my phone and everything works fine except that I get "no service" when I put my Three sim card into the phone. Could someone please help me work out what's wrong with my phone?
Here are the details of my phone:
Device: Softbank X01HT (Black one don't know how old)
IPL-1.04
SPL-2.10.Olipro
ROM Version: CRCs r13.3
Radio Version: 1.47.30.19
I've done the following:
Upgrade to hard SPL (first thing I did)
Run the Hermes_SIM_CID_Unlock_v3a (Though now I have doubts that I did it right)
Installed various rom (mostly for fun)
Installed Josh V15 Manila 2D rom
Installed the dopod AUS 3network WM6 (I thought it would have the right radio and settings)
Installed the CRC rom (I didn't like the dopod rom)
Any help would be appreciated. I've been searching but I couldn't find a good answer.
I'm not very familiar with that phone but you'll need to create a new data connection so that it can connect to 3.
When creating one, make sure you select the data connection type as GPRS, 3G etc, the access point is called 3services, no username or password is required. Should be good from then on.
These forums are awesome, with a bit more patience and perserverance I finally got my phone to work.
I did more searching on the X01HT and found that people were using the radio rom from pof's SIM & CID Unlocker. There was talk about cooking roms and stuff which I didn't want to try, so I decided to just run through the unlocker again. I made sure that I turned off my phone for 10 secs at the end and do a soft reset after the 10 secs, as I was a bit careless with that part last time.
After getting through all the steps, the phone recognised my sim and configured my phone for the three network. I can now connect to the net and make phone calls.
Now the details of my phone are:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
ROM version: CRC r13.3
Radio version: 1.16.00.00
Thanks guys for running this site. I reckon i'll be on these forums a lot in the next few months. There's still a lot of tweaks I want to do to my phone.
Mate, bit of advice, install Hard SPL V7 so there are no "accidents" when flashing a new rom... Its a bit better at protecting your Hermes when you flash than 1.40. Thats an older version of Hard SPL.
Cheers...
Ok i know that this is not in tune with the topic being discussed but i am really desperate.
I am a newbie to this site who just got a cingular 8125 and i really really need it to browse using the local GPRS networks here in nigeria.
I have used the Wizard Service Tool to unlock the CID, it just opens the google homepage and does nothing more. Being trying different ROMs to flash the phone but to no avail.
I am really really desperate. Please anyone help.
Below are the details of my phone:
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356382003239193
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
Thanks everyone, anyone. Someone.
Search for "Network Wizard" cab install file. It will set your phone to the cell network requirements. Do some reading and find the best version for your location.
RoryB said:
Search for "Network Wizard" cab install file. It will set your phone to the cell network requirements. Do some reading and find the best version for your location.
Click to expand...
Click to collapse
Seeing a network wizard wasn't easy
Saw some who told me to do a hard spl and install a WM 6.5 Rom which sounded like double blessings so i did that.
Yes it does browse now but it seems the ROM is too heavy for the phone to work with.
As battery life is really shortened, things are a bit slow and other times the phone hangs.
Also the rom has some basic bugs.
Really considering going back to the old ROM
But i know its a complex and risky process so i would have to be sure that this network wizard works before i try it.
Thanks a lot
Ps. Its Cravings ROM by the way.
Pps. I talk too too much. i know
That's what I'm having too...
I'm having the same problem with my cingular 8125...
One thing I do is instaled Opera mobile 10 in my 8125 and I set my connection-modem connection. and set the parameter to my ISP setting. and it's working...
but my internet explorer still can't browse the web. only my opera mobile and i tried it also with Bolt in esmertec Java,and it's working too...
^^ Remove proxy server settings from network connections menu