So I love my touch pro, cept for I have this bizarre dead spot in my condo, I wanted to run fieldtrial.exe to determine if I have a bad tower in my cell or if its just some local interference. Anyways long story short, the application starts but it asks for a password its all numerical, and its not any of the following.
my cell number
last 4 digits of number
esn
My service provider is telus and I have called them and HTC, both claim to not to know anything about it.
Not Happy!!
MSL
That would be your MSL code(6 Digits) They give it to you when you call in and activate the phone. So if you were to call in and reactivate the phone they'd give it to you.
Download BAF MSL Grabber and you can get your MSL code easily.
http://www.baf.cc/bafmsl
Completely free and created by a ppcgeeks user.
Tried the msl number was a no go...
Try this
Type in ##DEBUG# (##33284#) on your dialpad on your phone. Should take you to the FieldTrial application.
Related
Yeap thats right three days with Network Support and they can not figure out why my phones not updating. Anyone else have any ideas before i myself agree with them that it is my equipment and toss it on ebay
It is a Alltel 6800 that has the Opal2.40 loader with the New Verizon 3.57 Update
Any ideas are better than anything i have at this point my mind is tired.
Forgot to mention tech support asked me to go ahead and clear the storage and reflash the verizon update again so i am at Verizon Factory Defaults other than I have changed the SID to match the local Verizon SID
what are you trying to do?
I am just trying to get Data Access for Pics and Video messages as well as Web Access .... The phone works for Voice calls and will send and recieve regular txt but anytime it Dials into #777 it comes back Error 11 PPP Connection Error
I have went into the ESPT and checked my secuirty and its [email protected] and vzw so thats ok.....the techs say that my phone is not updating its key its been soft reset and hard reset more times in the past 3 days than i have had sexual relations with anyone other than myself
well lets solve one problem at a time. first, the sexual relations issue. go get yourself laid a bunch of times and then we can continue working on your phone.
i'm not sure about this MyMDN business, but your mdn is your phone number. your credentials for the data connections should be your 10 digit phone number:
##########@vzw3q.com
password is vzw.
also, check your vzw mdn registry key and make sure it is set to your 10 digit phone number
[HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\mm1\wspheader]
X-VzW-MDN should be your number
I'm married...think thats my problem on the first one someone told me the ring goes on the nice things about her go away
yes my phone number is what i ment by mdn @vzw3g.com
also i am a newbie on the registry so i will have to report back to you on that when i have time to download the software for the registry
ok i followed HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\mm1\wspheader] and i have no entry for X VzW MDN
I have
Accept
Accept-Charset
Accept-Language-
User-Agent
x-wap-profile
Since that phone was Alltel to start, has Verizon ADDED that ESN to their database??? Most likely they haven't..... The ESN is the Equipment Identification Number. My understanding is that it gets sent when a data connection is initiated. The MDN(Mobile Directory Number)@vzw3g.com will work but I suspect the ESN is not validating.....
EDIT - Humm, I didnt even see your response above.... So add the Key above and see what happens....
Here's what that section should look like...
"User-Agent"="utstar68kv1"
"Accept"="application/vnd.wap.multipart.related"
"x-wap-profile"="http://uaprof.vtext.com/utstar/xv68k/xv68k.xml"
"X-VzW-MDN"="your 10 digit cell number"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2;iso-8859-1;gb2312;gb13000"
"Accept-Language"="en"
...
yea i spent all of last week waiting on the to validate the ESN which they finally did waiting long enough is the key it just took them a while to get the ESN in the system and show a VX6800 and set-up all the "pervision" to match my phone (i know that is off in spelling)
Ok I added that string into the reg and did a soft reset and check the value to make sure it stayed and it did and I still get error 11
all i needed to enter was my telephone number not the @vzw3g.com on the end correct?
chanderson said:
yea i spent all of last week waiting on the to validate the ESN which they finally did waiting long enough is the key it just took them a while to get the ESN in the system and show a VX6800 and set-up all the "pervision" to match my phone (i know that is off in spelling)
Ok I added that string into the reg and did a soft reset and check the value to make sure it stayed and it did and I still get error 11
all i needed to enter was my telephone number not the @vzw3g.com on the end correct?
Click to expand...
Click to collapse
Here, I made you a cab to add the necessary info minus your cell number since I don't know it..... So here's what you do.
1. go into the registry and delete what you added. Hence - Delete whatever is listed under the WspHeader....
2. Run this cab.
3. Go back to WspHeader and change the X-VzW-MDN key from the 10 X's that I put in to your cell number.... ie: 1234567890, then exit the reg editor and reboot....
EDIT - The info in that cab came straight from MY registry.... Minus my cell number.....
Let us know...
ok cleared the reg...installed cab
reset
changed your xxxxx to my number and still ppp error 11
Have you tried to install DCD's carrier cab? I'd try that next, then reset.....
Get the Verizon carrier cab here
http://dcd1182.n715dp.com/index.php?dir=carriers/&download=dcd+Verizon+Carrier+20081031.cab
are u running a custom rom? try running dcd carrier cab, i have used it to fix a few phones i had switched to different carriers and data didnt work
Ok, quick question as i am new to the flashing never really tried any until now was too scared until Alltel screwed me by selling out.
Can i just put this on my card and run it from inside WM6.1?
Hey, i had this problem in the past. First let me say that i am not an HTC guru like most people here, so research anything i have to say.
Sounds like everything obvious is set correct, take a look in EPST. Dial ##778, select edit (but be careful not to edit anything, if you select view it will not allow you to see the needed information). It will ask for a security code, it is 000000. After it loads select view info, then Security.
The following information should be present.
HDR AN AUTH User Id : [email protected]
HDR AN AUTH Password : encrypted data characters
PPP User ID: encrypted data characters
PPP Password : encrypted data characters
S.IP DUN User name : [email protected]
In my case there were no encrypted data characters in the appropriate places.
The easiest way to resolve it from what i've read is to activate another device on your account then switch back to the desired unit. In my case i had to convice VZ Customer Service to completely reset my account. I believe there's a DMU code somewhere also that has to be 10. Search for PPP error code 11 security and i think you'll find something.
i got
HDR AN AUTH User Id : my#@vzw3g.com
HDR AN AUTH Password: a few numbers looks like my HEX ESN
PPP User ID: my#@vzw3g.com
PPP Password : vzw
S.IP DUN User name : my#@dun.vzw3g.com
I have another phone i could swap too and then swap back....its easy with verizon you just dial *228 and press 3..put in your phone number and last four of your ssn and your done
tried the swapping of the equipment and that didnt work...it did however get on line one time and i closed it and tried to connect again just to get the Error 11 again
Search for PPP error code 11 security, choose the "waiting for a dmu reset", i don't know how to embed it. That thread contains what i did to correct my problem.
Maybe the they are verizon specific, but your settings do not match mine nor any other xv6800 i have owned.
I have an idea, follow the instructions for the TP and getting EVDO on it.
Don't try this until you ask a few people first.
I have an idea, follow the instructions for the TP and getting EVDO on it.
Don't try this until you ask a few people first.
ok...here is my update on status...
Still no Data, BUT
When i was on the VZW Update ROM i had info in the following fields
HDR AN AUTH Password:
PPP Password
also
in the MIP default i had data under
AAA Shared Secret, and HA Shared Secret
NOW I used the latest dcd_titan_3.3.4.exe and I have nothing in these spots except 0000..ect under HDR AN AUTH Password
i went back to my LG 5500 and took allllll data off of my account waited like 4 hours and swapped back and still nothing.
only thing now is i think i will go back to the VZW Rom and call for a DMU reset and beg some more
I had the exact same problem after flashing to DCD 3.2.6. I had to call Verizon and have them generate a new A-key (26 digits).
You might have to call back a bunch of times or press the rep you get to generate the key for you (any of them can, they just don't know how).
Not sure why a new A-key would fix that problem, but I fought with it for quite a few days before finally getting it figured out. The data has worked flawlessly on my phone ever since.
Post back if this works if you would.
Hi i change my sprint touch pro prl to a local provider but when i went to activate the phone they ask me about the A-Key 16 digit number;which i can't retrieve from the phone after dialing ##2539# it displays A-KEY which is in blank however it allows to edit the A-Key value,I read on other forums that this phone doesn't use A key instead it use Meid for authentication its a Htc Pro Raphael 800
Need some help Thanks
Is your local provider GSM or CDMA, which one is it.
Did I miss something where they said the carrier was GSM, even a hint at it?
You can use all zeros, except for the Checksum value will still be dependent on your ESN.
They probably want to know the AKEY atleast to prevent cl0ning of your MEID and ther information.
Wanna send me the last three bytes of your pESN? It should be safe since it isn't unique or easily reversed. I'll PM you your zero A-KEY.
BTW: You shouldn't be able to read the A-KEY out of a phone, you are at the A-KEY entry screen...
as far as i know the A key is used for data mainly - i think it stands for authentication key -
on alltel i dont have an A key my friend on verizon does. his data will not work with out the a-key. he had to call them and then then he did a *228 and did the option to activate his phone what then put in his a-key.
i would try *228 and then see if it puts in the a-key that or find some on on sprint and see if they have an akey if they dont then u dont need one and just leave it blank
How would you know if there is an AKEY?
How would you know if the active Sprint Pro has an akey programmed into it? I'm looking at a Pro right now, and I don't know how you would read out an AKEY, the AKEY menu will never show you the existng AKEY or tell you if there is one programmed... It's my understanding you also can't read it out via Workshop either. By specification, the AKEY is supposed to be placed into the phone in such a way as to prevent you from reading it out... it's an anti-cl0ning thing.
As far as the AKEY being mainly used for data... it's up to the carrier to determine how the AKEY is used, all calls - some calls - data... As far as your friends situation, are you sure that the *228 didn't fix the data issue ofcourse having an AKEY would also be important if the carrier uses it.
Does anyone out there have memory addresses for reading the AKEY via Workshop on a TreoPro that they are willing to share?
I don't want to sound rude, just trying to make sure everyone has the right information.
Hopefully this is in the right place, but I cannot put it in a specific area since I am new to the forums. THANKS ALL!
HELP…
I need to enter my MSL to “fix” the SiriusXM app (or other streaming apps). Before I was able to use the instructions below. With this new rom (I am thinking any 2.3, but I am running Fresh EVO 2.3.3) , it takes the code, but nothing comes up. Does anyone have a work around???
1) Dial ##3282#
2) Choose Edit Mode
3) Enter MSL
4) Choose Advanced
5) Change HTTP PD Proxy Port to: 0 (old 8085)
6) Change HTTP PD Proxy Address to: 0.0.0.0 (old pd.vog.sprintpcs.com)
Same problem here. I've been looking for an alternate, but I haven't seen anything yet. Any one had any success getting into the MSL menu with 2.3???
Reading Msl
I saw the method for reading msl code via cdma workshop but the pics showed cdma ws 3.5 and i have 2.7 will that proccess still work
u can get the msl from programs like dfs tools cdma workshop and qpst as well as msl reader from the market but i always find it easier calling your carrier and telling them you want to do a data restore or something like that.
as for it not recognizing the ##codes the person who made the rom couldve taken the epst apk in order to save room.
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
llcobbs said:
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
Click to expand...
Click to collapse
yea thats probably it.
also, for anyone stuck in a 2.3 rom, try these codes
*#*#3282#*#* Data Restore
*#*#786#*#* Reverse Logistics Support (device wipe)
*#*#(your msl)#*#* reprogram phone # and msid
these are the codes we use at my store for the nexus s 4g. hope it helps
I have an issue. I have my msl and enter it. Using getprop (ril.MSL 123456) then use *#*#3282#*#* enter the msl. Always get invalid code. Using the number given to me by getprop.
Would being unrooted cause this?
Sent from my Nexus S 4G using XDA Premium App
Now it doesn't say invalid anymore after reboot. Now it just exits back out to menu to select what data setting I want to edit. I select wimax and it asks for msl again.type it back out to the menu I go.
Any suggestions?
Sent from my Nexus S 4G using XDA Premium App
hello any answers
Someone please read this!
Sent from my Nexus S 4G using xda premium
FIRST OF ALL.. ALL CREDIT GOES TO MYCRICKETFORUM. One of the best tutorials I have ever seen, especially for beginners.
Full Flash Sprint HTC Evo 3D to Cricket: Talk, Text, MMS, Internet
This is a revolutionary phone and hopefully some we see some of it's technology in other phones.
At this moment there is no 4G with Cricket. They have already made moves to establish a partnership and have an LTE network. It has been rumored that Sprint is even trying to move away from the Clear 4g network (WiMAX). This means that you will have no 4G service when you flash this phone. I believe the radio gets it's authentication by MAC address so it might be possible to put this on a Clear account. One of my customers said he was able to do this with his Epic that I flashed. He was also a Clear reseller.
Until we get permanent root, this tutorial will just cover putting the device on the $55 Android plan.
Let it be known that sometimes Cricket says they have put you on the $55 Android plan, but they put you on the All in 55 Plan (5m5). This is not where you want to be. You're paying 10 more bucks a month for absolutely nothing over the 45 dollar plan.
We offer plan change for free to forum members. Just use the contact us link at the very bottom of this page. Supporting members of the forum receive additional benefits such as free ESN changes on your account. No more paying $15 everytime you change phones. To become a Supporting Member, just go to the settings up top and find Paid Subscriptions on the left hand side. Choose a membership level of your liking. Also use the contact us form for any modifications you need made to your account or additional help.
Anyways moving right along. We'll establish the items that you will need. This is usually similar across the board.
NOTE: At the very end we'll include some wireless tethering instructions.
A. QPST (QPST Version 2.7 Build 355)
http://www.mycricketforum.com/flash...amming/5372-qpst-version-2-7-build-355-a.html
B. HTC Diagnostic drivers for the Evo (attached on this thread [32 and 64 bit])
C A Windows PC with either Win7, XP or Vista plus your Evo 3D with a USB cord.
D. PRL (*STICKY* Official Cricket PRL Thread)
http://www.mycricketforum.com/flash...041-*sticky*-official-cricket-prl-thread.html
E. CDMA workshop (google) OR CDMA Workshop 2.7 Download) to get the MSL (aka SPC) if you don't know it already. Alternative would be MSL reader from the Market or attached below.
http://www.mycricketforum.com/flashing-tools-files-programming/44-cdma-workshop-2-7-download.html
F. OPTIONAL: Android SDK which includes ADB drivers. (Android SDK | Android Developers)
http://developer.android.com/sdk/index.html
Please watch the videos and use the tutorial here. It helps to use both.
VIDEO #1: http://www.youtube.com/watch?v=TnFBkaIP7MI&feature=player_embedded#at=694
VIDEO #2: http://www.youtube.com/watch?v=6NpavnahHYs&feature=related
SPC/MSL Obtaining
Skip through all these screens on the EVO 3D until you are at the home screen. Go into the phone dialer and hit ##3424#. You might have to hit talk after this. It'll cause the phone to go into DIAG mode. You'll see the device on your computer. Use the diagnostic drivers (specify their specific location) to complete the install.
Now you can find your MSL using CDMA Workshop.
For CDMA Workshop, the port number has to be fairly low. I think we're talking about under 30. You'll see when you start it though. Look at your device manager to figure out the port that it's on. Select that port and then hit connect. Go over to the security tab and for SPC hit read. It'll give you your MSL/SPC. The best thing to do here is to use the SPC button then SEND command to send this number back to the phone and unlock it. Then type in 000000 or some number that's easy to remember. Hit the SPC button and WRITE. Now the MSL/SPC is 000000 or whatever you typed. This is all you need to do with CDMA Workshop.
Programming
This is the point where you will be using QPST. Use this tutorial to setup the EVO correctly. Note that the mobile IP behavior must be Simp or you will get errors on your Evo from time to time.
Ignore any NV read errors you get when writing to the phone.
( http://www.mycricketforum.com/flash...-*sticky*-qpst-tutorial-pictures-cricket.html)
Once you get done with this part, talk and text will work. If you are on the $55 Android the Internet should work. However...
Working with new devices (never activated)
If you watched the video, between part 1 and 2 we have a little change in plan here. This was due to the fact that our device was brand new and never activated. The hands free activation kept on popping up, and we don't believe the device had accepted all of the programming at that time. Our hunt led is to Sprint's website.
Dial ##(and your SPC, we set it to 000000)#. This will open up the EPST menu. Click edit mode. Put in the proper Mobile Directory number (your phone number) and the MSID (your MIN). Hit the menu button and then select commit modifications. The phone will reboot.
Once the phone has rebooted, go to the dialer again and hit ##data#. Click edit mode and enter your SPC for access. Make sure the settings look like it does below:
Active Profile: 1
User Name: [email protected] (put your phone number in this)
Reverse Tunnel Preferred: Enable
Home IP Address: 0.0.0.0
Primary Home Agent: 0.0.0.0
Second Home Agent: 0.0.0.0
HA Shared Secret: cricket
AAA Shared Secret: cricket
You can try hitting menu and commit modifications, but it will most likely tell you there were no changes made. Back out, go to advanced and then continue with the multimedia streaming setup below.
Media Streaming
Youtube videos might not play unless you modify some settings. Sprint by default routes media through their servers. To change this dial ##data# from the dialer on the Evo. You will get to the EPST settings. Click edit and then enter the MSL. It will prompt you for a password which is the MSL aka SPC.
Once you get past that, go to advanced > RTSP Proxy Address (for stock Gingerbread it's advanced > RTSP/HTTP Setting > RTSP Proxy Port). Make this 0.0.0.0. Also make the HTTP PD Proxy Address 0.0.0.0. Also change the ports for both of these to 0. Back out and you should be good.
MMS
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns>
<apn name="Production" numeric="310012" mcc="310" mnc="012" apn="1" user="your10digit#[email protected]" server="wap.mycricket.com" password="cricket" proxy="null" port="null" mmsproxy="null" mmsport="8080" mmsprotocol="2.0" mmsc="http://mms.mycricket.com/servlets/mms" type="mms" />
</apns>
Just edit the "your10digit#here" part with your phone number and save this.
Place it on your phone's SDCard under a folder called "apnbackuprestore". Then open the Android App APN Backup and Restore (included in this thread and on the Market) on your Evo. Backup the stock settings. Then delete APNs and restore the new APNs you just created.
You should have everything working now. Talk, text, MMS, and Internet. There are a few more steps left to enhance the experience. Below is my attempt to fix a step that I left out.
YOU HAVE COMPLETE THE FULL FLASHING TO CRICKET. ENJOY!
Issues:
TEXT: It is possible that your text messages will come in with the wrong time. If this is the case, you can download SMS Time Fix from the Market and set it up however you prefer.
HTC DIAG DRIVERS:
http://www.mycricketforum.com/attac...ket-talk-text-mms-internet-htcdiagdrivers.zip
APNBACKUPRESTORE:
http://www.mycricketforum.com/attac...t-talk-text-mms-internet-apnbackuprestore.apk
although this is helpful i am moving mine to boost but i get WS to scan any readable addresses ? please advise thanks
I see no contact us link at the bottom of your post. Also who are you affiliated with/ business. Just wondering I saw "We offer plan change free to forum members" Thanks
EDIT: Thanks. I also fixed the grammar around the first statement. Someone suggested a change in the original wording... I modified part of the sentence and forgot to look at the rest.
ta!
Thanks for this, I will be using it to flash a 3d later. I'm also going to join the other forum to check some info on a few other phones I'm flashing.
I'll let you know if anything comes up.
A question as well, I know that with the Evo 4g Sprint removed the stock voicemail notification service as they used their "visual" voicemail app, is the Evo 3d set up the same way?
Unfortunately the Evo 3D is also. You can try Voicemail Notifier (extorian) and see if that works. I posted a download in my forum.
For some reason they removed it from the Market. Maybe it won't work. Not sure. I've forwarded my voicemail to Google Voice so I have a type of Visual Voicemail now.
When I flashed my OG evo over to cricket, sometimes the stock browser and dolphin did not work. When this happened, I used opera..only when cricket services for data where not working with them and always connected. So if you cricket guys get these same type of random not working..have it loaded on your phone as a backup browser.
hey what if the phone got flashed back to sprints latest 2.3.5 stock firmware from cricket but the msl code was never put back instead its still 000000, i want to take the phone in for service the s is on and the phone is not rooted, my usb port is broken so i cannot root my device or turn s off or diag mode for cdmaWS. Will sprints repair look at this as a sign of voided warranty beacuse the msl code is now 000000, is there anything else i can do?
No4g4Me said:
hey what if the phone got flashed back to sprints latest 2.3.5 stock firmware from cricket but the msl code was never put back instead its still 000000, i want to take the phone in for service the s is on and the phone is not rooted, my usb port is broken so i cannot root my device or turn s off or diag mode for cdmaWS. Will sprints repair look at this as a sign of voided warranty beacuse the msl code is now 000000, is there anything else i can do?
Click to expand...
Click to collapse
Most likely yes they will look at both as voiding the warranty. Technically any modification done on the phone will void the warranty.
how do i get the free plan change???
can i get my phone put on 55 android plan plz have no 3g on my phlashed phone its a sprint evo 3d to cricket
dial ##786#, then press menu and then reset it will reset the whole phone also will restore your msl
Spc problem
Im trying to get my evo 3d spc, but the method this guys is using in the video is not working. Im using 01f2030f5f678ff9 as password and is telling me "Password is correct Phone is unlocked. But it doesnt show me any spc on spc box.
Can anybody tell me how?
Alright as much as I love a poll on a tutorial I made that originally didn't include a source, here's the entire forum on flashing the 3d.
http://www.cricketusers.com/sprint-htc-evo-3d/
I don't know why you are sending anything to get the spc. All you have to do is connect and then read the spc from the security tab.
im doing that but nothing happend it doesnt show me the spc. im using radio 2.17... Radio matter in this case?
Ah... One of my phone flashers notified me of this problem. I'll reply here and in your thread over there...
http://www.cricketusers.com/sprint-...ull-flash-cricket-talk-text-internet-mms.html
Try this SPC method from this tutorial.
Good luck.
chrisngrod said:
Ah... One of my phone flashers notified me of this problem. I'll reply here and in your thread over there...
http://www.cricketusers.com/sprint-...ull-flash-cricket-talk-text-internet-mms.html
Try this SPC method from this tutorial.
Good luck.
Click to expand...
Click to collapse
Danmm Dude thanks a lot you save my day.
Does anyone know how you can get it to work on the 25 or 35 dollar plan? I think the 25dollar plan would be better because I only need 300 minutes.
Is there a need for a "donor" phone, or an already active account with cricket to get the 3vo to work? Cuz trying to open new account, I was told my phone couldn't be activated with cricket...
sent from my nocturnaled Ice Cream Sandwich
powduh09 said:
Is there a need for a "donor" phone, or an already active account with cricket to get the 3vo to work? Cuz trying to open new account, I was told my phone couldn't be activated with cricket...
sent from my nocturnaled Ice Cream Sandwich
Click to expand...
Click to collapse
Can anyone answer this?
Also is getting the 25/35 dollar plan just a scam? No one wants to answer questions about it.
I have a 3vo flashed to metro and I'm having trouble getting it to connect to 3g. The place that flashed the phone did not repair the meid. But I'm not sure if they wrote a esn from a non 3g phone to mine when they houdinied it. When I read the nv items on qxdm the esn shows up but the checksum and eveywhere else is zeroed out. Di those need to match? Anyone familiar with this process please help I'm in a 3g area but cannot connect. And this 1x ia killing me. I just paid my bill and don't wanna go to boost if I don't have to. Thanks in advance
Shot from my Shoot3Rvo
Disclaimer, I'm not an expert and I have only done a handful of clones and conversions to other networks.
First does your phone make calls? If so meid/esn are ok. Since you have 1x that also shows your meid/esn are ok too.
You don't have 3G because they didn't enter the server information correctly or your HA Password or AAA pasword are wrong. Take the phone back and have them figure it out. I've always done it with a donor phone that worked completely on the network and I just copied over all the information with qpst or cdmaws to the new phone. Newer phones hide the HA and AAA passwords so using qpst/cdmaws cant retrieve them. If the donor phone is an android phone your can get the passwords using adb, logcat and go into ##data# and access the HA/aaa fields and the go back and search logcat for the passwords.
Start searching forums for retrieving HA/AAA passwords for the EVO 3D and also general activating on Boost/Cricket process. The process would be the same except with Metro you may not have to repair meid because their is houdini to insert the meid into the database. Find out what the programming settings are supposed to be and check them with qpst/service programming or go into ##data# check them there.
Good luck and happy reading.
Sweet thanks the the best feedback that I have recieved. The way the guides show is that for metro that the ha and spi are supposed to be the msl code but I have tried that among others. So maybe I need to be using the msl code that was used for the phone they houdini with. I don't know to much about using qxdm but the areas I do scan for meid and esn are all zeros or 0xFFFFFFF is that normal.
Shot from my Shoot3Rvo