NOOB Question. Laptop wont recognize Raph - Touch Pro CDMA

Have been trying to get up to speed but have hit a speedbump. Laptop(running windows vista with Mobile Device manager installed) will not recognize my Raph (Sprint Carrier). The weird thing is I plugged my friends in and it saw it immediately and partnered with it. I admit, I did alot of tinkering when I first got the thing but Ive since gone back in to undo or reset everyhting back to mimic what my frineds phones settings were. STUCK! Any help would be greatly appreciated. In the end I am trying to connect to transfer the PHM Regedit proggy to the phone so I can get the battery to last more than a HALF HOUR! LOL Great device, Crummy battery life!

back when I had a Mogul, I had the same problem. I went through a lot of headaches trying to add rules to my firewall software, since I found out those can cause a lot of problems with activesync (just do a google search for "YOUR-FIREWALL-SOFTWARE activesync" and I'm sure you'll find something)
In the end, I realized the thing just won't sync without the little connector that comes with it. That may have just been an isolated case, but make sure you're using the piece.
If you're still in the grace period, make sure you get a different phone, because there may just be something wrong with your mini usb port (something that ultimately caused the complete demise of my trusted mogul).
Also, isn't PHM regedit available as a .cab?
Good luck.

Thanks
Hey thanks for the reply.
Will try what you said and get back to report the results. I did notice this little piece in the box that came with the device but no documentation about what it is supposed to do.
About the .cab question...... I don't pretend to know what that file extension means. I have not come across a defintion yet. I downloaded PHM, and the "setup file" is on my laptops desktop. NOTE. I did sucessfully transfer this setup file to my friends phone but could not get the app to run. Kept getting an error about putting it in a file or something. (dont remember exactly) Any ideas?
Thanks again.

Success
the unamed connector did it! recognized right away. NOTE: strange that my friends device did not require this to be connected to view his device. ???? Oh well onto the regedit and see if I can extend this dismal battery life.
Thanks again.

uncheck the Enable advanced network functionality in the Setting > USB to PC. For some reason this makes the Vista PC recognize the phone, had to do some thing with my Mogul

Related

sms

Does anyone know a way to know if an sms has indeed been sent away? some Sms's just don't arrive and there is no notice to confirm the fact that it was sent off.
Lionel,
Pocket PC 2003 solves this. It displays a little message bubble when a message has been successfully sent.
I have seen that in Pocket PC 2002, if I write and send a message and turn off the display before the message leaves my phone, it will never go. But it will give you the error messge when you go back into your SMS's.
Regards
Keith Burke
Dublin, Ireland
many thanks, so I guess I'll have to get pcc 2003!
greetings,
Lionel
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Hi Ranger,
Can I be sure everything will work all right by upgrading to 4.00.10? I read quite some comments about a series of problems and some people going back to previous versions. Isn't it going to bust up my phone settings in Belgium? Someone wrote not to do any upgrades unless your an expert technician.
2. If I do go on with the upgrade can I just use sd-backup and get my stuff back from Sd-card? Isn't that going to restore my old system?
3. I don't know anything about technics. Most of the options on http://cuba.calyx.nl/~jsummers/ROMkitchen/ sound like Chinese to me.
Sorry for all the dumb questions, but I want to make sure I'm not going to run into trouble.
Hi Ranger,
I decided to run the risk anyway. I can probably do a hard reset and backup if I get into deep trouble.
I went to your link, but as I am a complete beginner at this, I got stuck after 'building the rom now'! I asked for the 'Installer.exe' but couldn't find it on my pc. What shoud I do?
greetings,
Lionel
Ok, first off. Back up your XDA ROM to your SD card. I've never done this, but I'm sure once this is done you can copy it to your desk top.
Secondly, yes there is a possability that it will kill your phone. See http://www.xda-developers.com/forum/viewtopic.php?t=1624
But I have never had a problem, once I stick to my golden rule. Close EVERY PROGRAM that you possibly can while doing the upgrade. And son't touch your computer while it is doing it as well. It's a tiny price to pay. If you're using USB it shouldn't take more than 5 minutes. With Serial cable, I heard it can take upto 20 minutes, maybe more.
As far as downloading it, after you've selected the options in the ROM kitchen [whici belongs to Jeff Summers by the way, not me ] make sure that the bar up the top is still green, NOT RED.
Next, down the bottom there are three options. For yourself, choose the EXE file. After a few seconds, might take upto 30 seconds, up the top of the screen will be a button to down load your file. Just save it somewhere on your computer and run it.
Make sure that your phone is in it's cradle which should be conntected to your computer [or connect the phone to the computer with a serial or usb cable]. Also make sure that the power cable is plugged in.
I think some people have advised taking out your SIM card but i never have.
That should be it.
Let me know either way. If it messes up, just pray that it's after 5% or 10%, so I hear. If so we can try the second option.
Regards
Keith Burke
Dublin, Ireland
One last thing. Take a note of your Network provider settings [GPRS etc...] before you upgrade. They will not be in the new 2003 image.
I forgot when I was doing mine and no longer have my GPRS settings
Hi Keith,
I'm trying it out right away. I have the backup on the sd-card, so that should work fine.
Just be careful with your SD card. I have heard a few reports that it sometimes gets erased in the PDA. Can't remember when or where but if you search the forum you might find it.
Good Luck. It's worth it.
if all you need are sms delivery reports, just click on options when in the compose sms screen and then click on delivery reports, unfortunately you have to do this for every sms as there doesnt seem to be a way to switch it on permanently.
ranger said:
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Click to expand...
Click to collapse
Does this have a radio update ?
Regards
René
Hi,
I've been trying to cook about 20 times since the 1. of August. Tried about everything. Tried all the roms, with and without adding software. Turning off my firewall. Trying all the Rom's. No other programs running.
This is what happens every time:
After selecting the items, I choose the 'install.exe' option and choose 'build rom now'. It starts doing 'something'. I have ADSL and after about 10 seconds the blue bar at the bottom is completed. At the top of the window in the yellow background it keeps saying
'Creating rom... Please be patient
copying rom Files
running mkrom
even after waiting for 30 minutes nothing more happens.
What am I doing wrong?
greetings,
Lionel
Radio Upgrade
@rk
No.
There's no Radio Stack Unit (RSU) Upgrade integrated.
As it depends on the location, where you live, be carefull, which you choose.
For me living in (good ol') Europe the RSU 4.21.00 from O2 UK webside is working.
My native language is Greek and naturally I send Greek sms.
The only problem is that XDA sends them using Unicode character set meaning that over 70 character messages will be splitted.
Does anybody know of any solution on this issue?
I have an O2 payg sim card, even though I ask for delivery reports on sms each time I dont get them, reason being the remaining balance comes in as an sms which cancels the process somehow. Has anybody got a solution to this?
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
ukneil said:
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
Click to expand...
Click to collapse
Thank you very much, that worked a treat, I was told by somebody to put that *0# before the fone number, no wonder it didnt work, thanks again.

USB Device Not Recognized

Howdy,
I have a 'jasjam' and am presently running WM6 Black. I decided today that I would upgrade to the new HTC ROM but almost every time I connect my phone to the PC here (Win XP) I get 'USB Device Not Recognized' on the occasion it does work, once the phone goes into the boatload when I try to upgrade (Hard SPL) I get 'A device attached to the computer has malfunctioned.' or something along those lines.
Any help here would be greatly appreciated.
Ben.
Bump...
The phone seems to initially recognized (XP installs driver for HTC USB Sync), but after a little while the charge light will turn off and the phone will not be seen. After reconnecting it it becomes an 'Unknown USB device' again.
I'm running Schap's 3.54c.
Hopefully someone's encountered this problem before.
Ben.
Managed to upgrade with SD card, which indicently I felt was rather an improved process over upgrading via USB.
In any case I'm still having no luck getting the USB connection to function even now with the new HTC rom.
I've tried various things including cycling 'advanted networking features' under the USB connection properties (I saw this mentioned in another thread).
Again, any help would be appreciated.
Ben.
Try a different usb cable...they have been known to go bad.
galaxys said:
Try a different usb cable...they have been known to go bad.
Click to expand...
Click to collapse
Yep,
I have had 2 go bad so far.
I had thought the same thing, so I tried 4 different cables & purchased a brand new one to no avail. :-/
AussieBen said:
I had thought the same thing, so I tried 4 different cables & purchased a brand new one to no avail. :-/
Click to expand...
Click to collapse
I got the same thing with my hermes...i think its a hardware issue. Do you have issues with slow bootup, lost BT etc?
do a system restore on your machine. select the time before you did your last flash. my pc at work does the same thing, system restore usually fixes it.
cyndication said:
do a system restore on your machine. select the time before you did your last flash. my pc at work does the same thing, system restore usually fixes it.
Click to expand...
Click to collapse
That's a good idea, that's worked before for me also.
Another option, if you can find the phone under 'Device Manager' on your PC, is to remove it.
And then when you plug your phone back in to your PC it recognizes 'New Hardware' and reinstalls it.
Sometimes that works.
It's happening also for me from time to time.
- A restart of both machines sometimes helps.
- good usb cable is needed (I had a retractable and it was almost never syncing).
- reinstall activesync + delete partenrship on both tel & pc is the last thing you could try...
Still it happens to me sometimes.
PS1: I was almost never able to sync via usb cable when not connected to the Company Lan.
PS2: I found a Mobile Checkpoint VPN client was also "disturbing".

i really screwed up---need help

so my activesync hasnt been working for a few days, so i went onto microsoft to try to fix it, and they had an idea of removing the program and reinstalling it, so i did that. My device still cannot be read. i am going to reflash my device with dcds rom, but the only problem i am afraid of now is the fact that i dont have any way to back up my contacts since i cannot connect to my computer, can someone please help me, i really dont know what to do
Get the PIM backup program and save the data to your SD card....
how do i get it on my phone, i cant connect to my pc
You have to copy the cab file to your micro sd card with a card reader. Then install from the cab and run backup to your card.
another way is to make a share on your desktop and connect to it on you phone via wifi.
i got it on my phone, thanks for the help, i really appreciate it
Activesync
rq530 said:
so my activesync hasnt been working for a few days, so i went onto microsoft to try to fix it, and they had an idea of removing the program and reinstalling it, so i did that. My device still cannot be read. i am going to reflash my device with dcds rom, but the only problem i am afraid of now is the fact that i dont have any way to back up my contacts since i cannot connect to my computer, can someone please help me, i really dont know what to do
Click to expand...
Click to collapse
I am glad you go the sd card flash to sort out your problem of getting the rom onto the ppc. My activesync connection is incredibly flaky too. One minute it works, next minute it wont. I am almost certain it is a problem with the pc as others have this problem too. I even seem to remember a post by dcd saying he had the same issue.
Well the way I fixed the problem was to turn off "enable advanced network functionality" from the ppc side. The option is in the start-->settings-->connections tab-->"USB to PC" applet. (This is also sometimes misplaced in start-->settings-->system tab when you have WM6.1 running). Once I disable the advanced network functionality my activesync works flawlessly, and despite what the warning tells you, it seems just as fast as with the advanced network functionality enabled.
i tried it, but unfortunately it still didnt work. i cant even flash my phone right now
First,make sure that both the phone and windows mobile device center are configured to use usb. Also try clearing that option and reselecting it. That sometimes helps. To back up your contacts,see if you can sync over bluetooth. I have found that sometimes I can sync over bluetooth even though it wont connect over usb.
I had a similiar prob with active sync, googled and found a newer version installed the newer version after uninstalling the old. No more problems.
gogetta, where did you find a newer version of ActiveSync?
Wait, maybe I'd better start with "What version did you find?"
I've been using the 4.5 that shipped with my xv6800, and it has worked perfectly ... until ...
Last weekend I installed a new hard drive, using the old one as the slave. It's been a nightmare. I can't get it to work at all!
I've installed, uninstalled, deleted registry settings, etc. so many times I can't even count. I've been all over the web and tried many things .. nothing seems to work.
So what version did you find that worked for you?

[Q] Blue Screen of Death When Connecting to Win7 32 bit

Have found a few examples on other devices of this problem, but not much in the way of solutions. Kinda cripples one's ability to do much with phone if I can't connect it without crashing my computer!
First time I connected, it did not BSOD until I switched to drive mode. Error was DRIVER_IRQL_NOT_LESS_OR_EQUAL. Since then, it BSODs immediately upon connecting phone in any fashion. First I tried uninstalling all the drivers it had put on (3 items starting with HTC..) and redoing. Same result. Uninstalled all again and installed the HTC sync stuff from their website. Same result. Some google searches indicated this could be a RAM problem and I figured why not check it...all seems well from ramtest, so I don't think that is involved.
Also, it will connect and not crash in safe mode. It connects fine to a friend's laptop (Vista 32-bit).
I'm kinda low on ideas of stuff to try to resolve this. Would be grateful for any input on the matter.
Solved it after examining error log more thoroughly, just figured I'd post in case anyone else encounters this probably rare issue.
That goofball verizon mobile crap mounts as a CD ROM drive. I was using a program called DVD43 in conjunction with Handbrake to rip my dvds to mp4 files. It attempts to scan any DVD inserted, and the verizon program causes crash when it tries to read it when phone was plugged in. Program off, all is well.
Agreed.
I concur, your right, thanks alot.
Ya thanks. I have slysoft and I'm sure it could have happened to me.
Sent from my rooted Thunderbolt with VirusROM AirborneTB. Xda premium
so glad I found this, just got my tb tonight and tried to move some stuff on it and BSOD, I had dvd43 running.

[Q] Can't transfer files from computer to phone?!?!

Hey guys.
I'm hoping you can shed a little light here as i'm starting to get frustrated.. Now i've seen various similar threads along the same lines so it's obviously a common problem and anyone who's offered a suggestion to the fix on other threads, i've tried to no avail..
I've had a DHD prior to this and done the whole rooting/ROM'ing thing regularly so quite used to procedures and what to do, but that was slightly different as i did it via the advanced hack kit.. This phone doesn't seem as straightforward to do. But about 3 weeks ago i bit the bullet and unlocked my phone with the intention of rooting and ROM'ing soon after.. Everything went well and the phone has been working perfectly, no issues at all and i've activated the developer option aswell and it's USB debugged box is ticked...
However, a couple of days ago i tried plugging it in to the laptop to transfer some music onto it, but both the two USB 2.0 ports on the right don't recognise it, i get the USB device not recognised message, anything else works fine in them, the only remaining port, a USB 3.0 on the left sees the phone and does allow me to access it, sometimes i can see everything straight away, sometimes i get a blank box and have to wait and the green bar takes ages to load along the bar at the top.. I've even had what appeared to be arabic symbols at one point where it should say Internal storage.. That confused me very much!! But now it won't let me transfer anything other than a single image file to the root. I did this as a test.. It transferred it straight away with no problems, but if i try adding anything else after that, it just hangs on the copying dialog box and either i have to close it or it does it for me a couple of minutes later with the "can't copy file" and "skip this file" options.. I've also tried it on the home computer which works fine but still leaves me with the same problem. Both are Win7 64bit.
I've uninstalled everything HTC from my laptop, uninstalled and reinstalled the drivers supplied in the fastboot folder which i was told to download for the unlocking process.. Now, i don't want to have to download HTC Sync as i don't want to access my phone via that, i'd rather just use file explorer and ditch the bloatware.. I'm not sure if i'm running the correct drivers and this is the problem, but i can't seem to find them anywhere.. P.S. I'm in the UK so this is the international version..
Any help would be great as i'm tearing my hair out... I know it's probably something simple but it's refusing to work..
Hey i hope this helps
RyanH77 said:
Hey guys.
I'm hoping you can shed a little light here as i'm starting to get frustrated.. Now i've seen various similar threads along the same lines so it's obviously a common problem and anyone who's offered a suggestion to the fix on other threads, i've tried to no avail..
I've had a DHD prior to this and done the whole rooting/ROM'ing thing regularly so quite used to procedures and what to do, but that was slightly different as i did it via the advanced hack kit.. This phone doesn't seem as straightforward to do. But about 3 weeks ago i bit the bullet and unlocked my phone with the intention of rooting and ROM'ing soon after.. Everything went well and the phone has been working perfectly, no issues at all and i've activated the developer option aswell and it's USB debugged box is ticked...
However, a couple of days ago i tried plugging it in to the laptop to transfer some music onto it, but both the two USB 2.0 ports on the right don't recognise it, i get the USB device not recognised message, anything else works fine in them, the only remaining port, a USB 3.0 on the left sees the phone and does allow me to access it, sometimes i can see everything straight away, sometimes i get a blank box and have to wait and the green bar takes ages to load along the bar at the top.. I've even had what appeared to be arabic symbols at one point where it should say Internal storage.. That confused me very much!! But now it won't let me transfer anything other than a single image file to the root. I did this as a test.. It transferred it straight away with no problems, but if i try adding anything else after that, it just hangs on the copying dialog box and either i have to close it or it does it for me a couple of minutes later with the "can't copy file" and "skip this file" options.. I've also tried it on the home computer which works fine but still leaves me with the same problem. Both are Win7 64bit.
I've uninstalled everything HTC from my laptop, uninstalled and reinstalled the drivers supplied in the fastboot folder which i was told to download for the unlocking process.. Now, i don't want to have to download HTC Sync as i don't want to access my phone via that, i'd rather just use file explorer and ditch the bloatware.. I'm not sure if i'm running the correct drivers and this is the problem, but i can't seem to find them anywhere.. P.S. I'm in the UK so this is the international version..
Any help would be great as i'm tearing my hair out... I know it's probably something simple but it's refusing to work..
Click to expand...
Click to collapse
Olrite so i guess you are dealing with the same i dealt with a while ago when i was on cayanogen mod 11 on my HTC one M7 International ... there are many alternatives to transfer stuff from phone to Laptop but first lets talk about the normal one
Method 1 which you should try is ....
* Download the HTC sync manager .. its ok if you dont wanna use it to transfer data .. just install it ...
* ok so now the important one .. make sure you have window media player installed on your computer ....
okay so why windows media player ??
Well it contains all the MTP drivers you need to connect your phone to your pc ...
* you can restart your system now .. (Optional)
* now connect your device with debugging on ... grab the notification bar click on USB related notification .. and choose MTP or something like that ...i mean don't choose HTC sync manger .. choose the other one
* Now if everything went well you will se your storage in My computer ... and in Windows media player too...
Method 2....
Well if nothing works then download an app called Air Droid ...
it have some nice functionality ...
you will get to know how to use it after installing it ...
by chance if the local link given in the app does not works make a hotspot .. connect your computer to it and open a browser like chrome .. and go to 192.168.1.1:8888
Note : port 8888 is pre configured in the app so if you changed it .. use the dirrent port you used ..
If you are not laptop is not connected with your phone's hotspot then your phone and computer should be on the same network ..
Good luck ... hit thanks if it works just to let me know
nicolasenjay said:
Olrite so i guess you are dealing with the same i dealt with a while ago when i was on cayanogen mod 11 on my HTC one M7 International ... there are many alternatives to transfer stuff from phone to Laptop but first lets talk about the normal one
Method 1 which you should try is ....
* Download the HTC sync manager .. its ok if you dont wanna use it to transfer data .. just install it ...
* ok so now the important one .. make sure you have window media player installed on your computer ....
okay so why windows media player ??
Well it contains all the MTP drivers you need to connect your phone to your pc ...
* you can restart your system now .. (Optional)
* now connect your device with debugging on ... grab the notification bar click on USB related notification .. and choose MTP or something like that ...i mean don't choose HTC sync manger .. choose the other one
* Now if everything went well you will se your storage in My computer ... and in Windows media player too...
Method 2....
Well if nothing works then download an app called Air Droid ...
it have some nice functionality ...
you will get to know how to use it after installing it ...
by chance if the local link given in the app does not works make a hotspot .. connect your computer to it and open a browser like chrome .. and go to 192.168.1.1:8888
Note : port 8888 is pre configured in the app so if you changed it .. use the dirrent port you used ..
If you are not laptop is not connected with your phone's hotspot then your phone and computer should be on the same network ..
Good luck ... hit thanks if it works just to let me know
Click to expand...
Click to collapse
Firstly, thank you for taking the time to run through the options.. I really appreciate that.. Unfortunately it seems nothing in terms of transfer via USB works (at least with this cable, it's the only one i have so can't try another at this point) on this phone anymore, i don't know why the sudden glitches, it's been working fine since i've had it but just decided to stop connecting this last couple of days, so whether that's down to drivers or the cable being dodgy etc i have no idea, but the Air droid app works beautifully and i can now transfer anything and everything, it has such a great UI too so thank you for pointing me in the direction of that.. Without it, and you, i'd still be stuck.. So i guess i no longer need to worry about cables or drivers anymore so thanks again!
Pleasure
RyanH77 said:
Firstly, thank you for taking the time to run through the options.. I really appreciate that.. Unfortunately it seems nothing in terms of transfer via USB works (at least with this cable, it's the only one i have so can't try another at this point) on this phone anymore, i don't know why the sudden glitches, it's been working fine since i've had it but just decided to stop connecting this last couple of days, so whether that's down to drivers or the cable being dodgy etc i have no idea, but the Air droid app works beautifully and i can now transfer anything and everything, it has such a great UI too so thank you for pointing me in the direction of that.. Without it, and you, i'd still be stuck.. So i guess i no longer need to worry about cables or drivers anymore so thanks again!
Click to expand...
Click to collapse
Well at least the other one solved your problems and air doid actually have much more functionality then USB but on the other hand speed is slow but not that slow ..... so enjoy PM if any other problem cya

Categories

Resources