Hi,
I want to flash a new rom to my HTC TOUCH DUAL.
if i boot in three color modus it says
NIKI200
SPL-1.22.0000
CPLD-4
Click to expand...
Click to collapse
But if i want to flash anything, after a while i get "Connection error".
How do i flash it ?
Thanks in advance
Try to flash HardSPL/USPL to your device first...
vcdwelt said:
Try to flash HardSPL/USPL to your device first...
Click to expand...
Click to collapse
That failed too
Can you send me a link with a tutorial to flash USPL?
Take a look to this Thread: http://forum.xda-developers.com/showthread.php?t=355730
There you can find a Tutorial for flashing SPL to your Device.
vcdwelt said:
Take a look to this Thread: http://forum.xda-developers.com/showthread.php?t=355730
There you can find a Tutorial for flashing SPL to your Device.
Click to expand...
Click to collapse
That's not HARDSPL?
Dennus2008 said:
That's not HARDSPL?
Click to expand...
Click to collapse
It's about all SPL's (SSPL,USPL,HardSPL) just start reading there
vcdwelt said:
It's about all SPL's (SSPL,USPL,HardSPL) just start reading there
Click to expand...
Click to collapse
So i try to flash the USPL, it hangs on 0%, and 2 minutes later i get "Connection error".
What am i doing wrong?
I had exactly the same problem (also my phone was sim unlocked).
Try to use Niki SuperCID
http://forum.xda-developers.com/showthread.php?t=395945
i used that, now i can flash any rom i want.
369011 said:
I had exactly the same problem (also my phone was sim unlocked).
Try to use Niki SuperCID
http://forum.xda-developers.com/showthread.php?t=395945
i used that, now i can flash any rom i want.
Click to expand...
Click to collapse
Not working too
I think the problem is in your pc
Tim4 said:
I think the problem is in your pc
Click to expand...
Click to collapse
Could also be a bad usb cable...
rling said:
Could also be a bad usb cable...
Click to expand...
Click to collapse
Oke, i will try a new usb cable
I'll keep you all updated
Dennus2008 said:
Oke, i will try a new usb cable
I'll keep you all updated
Click to expand...
Click to collapse
It´s not working with a new usb cable
Dennus2008 said:
It´s not working with a new usb cable
Click to expand...
Click to collapse
I found something, at the moment my phone boots into the three-color screen, the activesync connection is lost, and won't come back.
Is that normal?
it's normal.
Try this one
1)Download original ROM
2)Disable afirewall/antivirus software
3)Unplug ethernet cable
4)Uninstall activesync
5)Restart PC
6)Boot phone in three-color screen (Bootloader)
7)Try to flash original rom
if you still have no success, there is two possible reasons:
1)Problem in your PC (Just reinstall windows, formating will be good to )
2)Problem in phone's flash memory (Only service center can help you)
how about sd card flashing
How come nobody gave him the option to flash using the memory card, dont know how to name the nbh file (NIKIIMG??) but that could work for it, whoever has the name for the image should also update it to the wiki..
Related
Hi.
During upgrade to Crystal V3, I get this error at the end:
Please look at attached image...
Anyone knows what the fault is?
PS. This is the new Prophet that I got as a replacement for the old, bricked one...
Regards.
Try to move the install folder to C:/
I'm not sure if it is the same error message, but months ago I had the same prob and after this it worked.
Good luck
Tried, no luck...
hifiasylum said:
Tried, no luck...
Click to expand...
Click to collapse
reset phone and restart PC.. after that install aku 2.2 and retry..
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
hifiasylum said:
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
Click to expand...
Click to collapse
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Did you perform step1 before running Crystal upgrade?
I had the same problem... It worked successfully on a different computer.
panda88 said:
Did you perform step1 before running Crystal upgrade?
Click to expand...
Click to collapse
Yes, I allways downgrade before I upgrade.
Really, I do.
l3v5y said:
I had the same problem... It worked successfully on a different computer.
Click to expand...
Click to collapse
I have now tried 6 different computers, no luck. Believe that the fault is that I must unlock the phone or something. Donno, maybe the easiest thing is to sell the whole phone and get one a little more "programming friendly"?
dkleuven said:
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Click to expand...
Click to collapse
You dont think this will in some way or the other f_ _k up my Prophet?
hifiasylum said:
You dont think this will in some way or the other f_ _k up my Prophet?
Click to expand...
Click to collapse
It shouln't!
I saw from one of the thread, somebody also has the same exact problem, this is caused by the path is too long. It is suggested to put it in C:\, which you said you have done. The other person reported that it's working after he moved the installation file. I dun understand why it wouldn't work with yours.
Here is the post, finally found it:
http://forum.xda-developers.com/showthread.php?p=1549150#post1549150
User reported the problem was solved in #318
did u unlock CID yet?
Hi again. Found the problem. It seems that I was using a somewhat corrupt downloaded rom. The rom was ok, but it must have been destroyed during the downloadprocess.
Now the phone has Gullum Touch IX installed and works like a charm.
Thank for all your help, great forum!
Regards, Lars
818pro problem during upgrade to wm6
hai..
during upgrade my dopod 818pro to wm6, suddenly blackout and my upgrading was disrupted.. i reset back my dopod 818pro to continue back my upgrading..
but, I'm facing a problem which it's just hanging at start up screen..
i already try hard reset many time, but still can't to operate..
i just want to synchronize back to my pc to continue back my upgrading...
could somebody help me to this matter.. i don't know what to do now..
if it can enter bootloader, check the wiki for recovery, and follow it through.
Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
if u can extract the *.nbh file (assuming it is inside the EnergyROM Upgrade.exe), then u can try flash using microSD. And u should post in EnergyROM thread.
krot84 said:
Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
Click to expand...
Click to collapse
Hard SPL maybe
Shazad.K said:
Hard SPL maybe
Click to expand...
Click to collapse
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
monx® said:
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
Click to expand...
Click to collapse
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
krot84 said:
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
Click to expand...
Click to collapse
if i am reading your post correctly, you've never been able to flash a custom rom. If this is the case, have you "hard spl" your phone as yet?
Yes you're right. maybe i mixed up with the whole process of the hard spl even though i had read the guide several times .
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
thanks man!!! i'll try
pbmestre said:
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
Click to expand...
Click to collapse
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
krot84 said:
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
Click to expand...
Click to collapse
leave the phone plugged in when it says installing "something." even if it takes 5 minutes...let it sit until the computer installs the driver.
then run the spl again. this happens to me every now and then. just give it time to install the driver.
you ment to run the RaphaelHardSPL-Unsigned_190_1_3.exe from my computer ??
yes...
it needs to install the driver for flashing the device.. on the pc.. when it done the hardwarewizard tell you that it works.. after that start the hardspl prog
thanks, i'll give it a try later on this day 'cause i'm at work now
that would be the best option
i doubt ur systemcommander let you install anything like drivers and tools to withstand his authority lol
LOL i don't think anybody minds what i do on my computer here at work..
then whats the wait ? hehe
mmm the data cable i guess... don't have it here
lmao
oke oke u got me there
(they're like 3 bucks in most local stores (not that im an addict or anything (a)))
not at all )
by the way, i've tried yesterday to do exactly as you told but no luck.
after i used the SSPLManual and pressed the RaphaelHardSPL-Unsigned_190_1_3.exe it said " error - there's a problem operating or something like that"
OK, I wanted to format the internal storage so I Task 29 it.
It told me to hold the volume down button when it reach 99%
Well it stopped at 96% for a while, so I held the volume button down
Now when I turn on the screen, it just shows the loading screen towards that CleanEx rom and nothing else!!!
Bootloader mode only supports disk drive connection to pc so I don't think that's appropriate.
I need help because I am about to give this phone as a gift
THANK YOU IN ADVANCE
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
A new hacker said:
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
Click to expand...
Click to collapse
have you flash a correct radio FIRST??
geppo1975 said:
have you flash a correct radio FIRST??
Click to expand...
Click to collapse
It was flashed before, the correct one IDk.
A new hacker said:
It was flashed before, the correct one IDk.
Click to expand...
Click to collapse
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
geppo1975 said:
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
Click to expand...
Click to collapse
Can you provide assistance with that? That is a new term to me
A new hacker said:
Can you provide assistance with that? That is a new term to me
Click to expand...
Click to collapse
that's mean your file(rom or radio)in download or upload has lost some parts or file!!You can try to dwld from other server or try again from same...sometimes happens
you task29d, do you even know what that means? it means you formatted your phone there is no rom on it, how can it boot with no rom?
enter bootloader, connect usb, (yes bootloader is fine),, flash a rom.
OK, sorry for the fuss. Now it seems that usb is working but when I try to upgrade the Rom (official) the percentage just stays at 0% and gives some error messages. Please help
A new hacker said:
and gives some error messages.
Click to expand...
Click to collapse
aww c'mon, at LEAST tell us the error
It says [connection] cannot establish (I've done all the things listed)
Error [262] thanks for the assistance
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
- Are you well connected over Active Sync?
- Did you test it on a other USB port?
- Did you temporary deactivated your AntiVirus?
- Try to reset device and pc
- On Windows vista and window 7 don't forget to run RUU_Leo_S_HTC_... as administrator
This are some suggestions that can solved connection problems.
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
timmymarsh said:
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sorry for the bad news but can you visit this forum? It has more details and updated news. and i like to emphasize that the usb doesn't work, disk drive or activesync
http://forum.xda-developers.com/showthread.php?t=891115
thread closed now redundant, linked thread continues.
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.
After having problems with Android NAND i have decided to move back to win mobile 6.5, so i flash back to 3.14.xxx
every time when i turn off and on the phone its do everything that a first time boot do, after ages when the phone finally gets on all the settings are stock,
any solution for this ?
Did you run a Task 29 before flashing the Win Mo ROM?
T-Macgnolia said:
Did you run a Task 29 before flashing the Win Mo ROM?
Click to expand...
Click to collapse
yes, i did
Hmmm what ROM is it? Is it a official or custom ROM?
T-Macgnolia said:
Hmmm what ROM is it? Is it a official or custom ROM?
Click to expand...
Click to collapse
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Gihanfx said:
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Click to expand...
Click to collapse
Ok that is a official ROM. did you get it from HTC.com using your serial number to confirm it is for your HD2? Also have you thought about flashing it via SD card?
Oh and you don't have to hit the thanks button for every reply but thank you for the gesture.
T-Macgnolia said:
Ok that is a official ROM. did you get it from HTC.com using your serial number to comfirm it is for your HD2? Also have you thought about flashing it via SD card?
Click to expand...
Click to collapse
Ill try and it let you know, Thanks a lot
Gihanfx said:
Ill try and it let you know, Thanks a lot
Click to expand...
Click to collapse
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
T-Macgnolia said:
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
Click to expand...
Click to collapse
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
did everything as in the guide, but still the same problem
Gihanfx said:
did everything as in the guide, but still the same problem
Click to expand...
Click to collapse
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
T-Macgnolia said:
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
Click to expand...
Click to collapse
Thanks again for the Help, after installing the new ROM i got far too many errors, but i restarted the phone so many times and things are back to normal, still when i access google maps the phone restarts and cant access the market place cus the update always fails, i also feel there is something wrong with the memory, anyway thanks again