I tried to Sync TP using USB cable but ActiveSync 4.5 won't pick up the phone. I don't know what to do.
I restarted PC, TP (took battery out as well), re-installed ActiveSync on PC, and still nothing doing.
I did a search and found some people saying it could be the cable, but I don't think so because the PC registers the TP and even launches ActiveSync, but it then disconnects and nothing doing. TP even recognizes the connection, but then a pop up comes and says that I have to install ActiveSync on my PC.
Any suggestions much appreciated.
start -> settings -> connections -> USB to PC -> Uncheck ''enable faster data synchronization .
Soft reset
This should do the trick.
Next time use the search button my friend
Shazad.K said:
start -> settings -> connections -> USB to PC -> Uncheck ''enable faster data synchronization .
Soft reset
This should do the trick.
Next time use the search button my friend
Click to expand...
Click to collapse
I did a search and the problem is that I don't have ''enable faster data synchronization"...instead I have "enable advanced network functionality" which was already unchecked.
i was having the same problem i syced through bluetooth and now both work great to this day. It was the initial connection i was having proble,s with
titos1997 said:
i was having the same problem i syced through bluetooth and now both work great to this day. It was the initial connection i was having proble,s with
Click to expand...
Click to collapse
not helpful because my PC does not have BT
go to ur firewall settings and make sure in exceptions u have everything that involves active sync checked....
imtjnotu said:
go to ur firewall settings and make sure in exceptions u have everything that involves active sync checked....
Click to expand...
Click to collapse
i forgot to mention that I already tried that.
hmm this ponders me then..i had that problem for awhile untill i fixed everything in my firewall and now i have it going...
what rom are you using?
i had a problem similar to this when i was using juicy 4.7
if you put your phone in bootloader try flashing a new rom to see if you have the same issue. Your computer wont show your TP is connected when your in bootloader so just go ahead and flash, it will work
ibmxx187 said:
what rom are you using?
i had a problem similar to this when i was using juicy 4.7
if you put your phone in bootloader try flashing a new rom to see if you have the same issue. Your computer wont show your TP is connected when your in bootloader so just go ahead and flash, it will work
Click to expand...
Click to collapse
No custom rom's. I like it original.
I have at present exactly the same problem. Is anybody aware of a solution?
Thank you for the support, Siegfried
The only thing that solved this for me was a hard reset. I tried many things and for ME, this was the only thing that worked.
May sound crazy but....
Did you CHECK the box that said "Enable Advanced Network Functionality"? You may have to re-establish a partnership with Activesync.
Related
That's the big deal... once I connect it once it keeps connecting back until I soft reset... It doesn't matter if I press disconnect on the bubble... It will just dial back again in a few seconds.
Anyone has a clue on what it might be? any setting I might change?
I'm using Transformer 1.0
Hi, try this:
http://www.benrichards.co.uk/?p=180
philocritus said:
That's the big deal... once I connect it once it keeps connecting back until I soft reset... It doesn't matter if I press disconnect on the bubble... It will just dial back again in a few seconds.
Anyone has a clue on what it might be? any setting I might change?
I'm using Transformer 1.0
Click to expand...
Click to collapse
Some program is reconnecting beause it needs internetconnection. A common reason is that you choose an emailaccount to check your mail at intervals. In that case, if you change that email setting to check manually, it only connects when you ask for it.
Perhaps in your case you activated an other program (f.i. the Wheather tab of Home plugin?) that uses an internet connection. But you should search the solution in that direction. Good Luck!
rondol1 said:
Some program is reconnecting beause it needs internetconnection. A common reason is that you choose an emailaccount to check your mail at intervals. In that case, if you change that email setting to check manually, it only connects when you ask for it.
Perhaps in your case you activated an other program (f.i. the Wheather tab of Home plugin?) that uses an internet connection. But you should search the solution in that direction. Good Luck!
Click to expand...
Click to collapse
The weather tab is configured to manual update and i got no programs running.
does msn live sync without prompting?
philocritus said:
The weather tab is configured to manual update and i got no programs running.
does msn live sync without prompting?
Click to expand...
Click to collapse
I haven't used msn Live for a while now, but I can remember that I encountered the same reconnecting issue when I tried it some time ago. I also found out a way to change setting to make it stop. The only thing is.... I can't remember and I don't have it installed at the moment. But I think you have answered your own question.
No doubt about it that this issue is decribed in at least one of the many threads. Try the search option, I'm sure it will be succesfull!
solved it by installing a new msn live version. looks like it was a bug...
Bandswitch
I prefer this program: http://www.freewarepocketpc.net/ppc-download-bandswitch-v1-2-3.html
You can adjust individually, which connection you want to close.
Hi All,
I upgraded my O2 Atom to ATOMWM607WWE4PP. Everything is running fine
and this is really a good ROM. My Atom is working fast and lot of good features
of wm6 I am enjoying.
The only problem I have noticed about wifi. I am trying to enable this through
wifi manager but after trying 10 sec it could not make it on.
Any suggestion how to fix this ..
Version Info -
Author : Jiggs
Hardware:C1
Pagepool:4mb
Radio:R060822N_MN1ARC_RS00052
ROM:20060426B1WWE
Regards,
Jagjeet Singh
fix wifi via registry
first and foremost let me caution you in changing the registry, it could crash your system.
HKLM\System\State\Hardware
edit or create a dword Wifi. i think the value for "off" state is "1"
if you are a risk taker, try changing it to 3, 5 or 8. mine is set to 3, the wifi is on, if set to 8, it is connected. i hope this helps.
btw, after i was able to turn the wifi "on" via registry, i am able to turn on/off(toggle) wifi via wireless manager already. i don't turn on/off wifi via registry anymore. i only use the registry to see/verify the values. good luck and let us know how it turns out. thanks.
When I test the WIFI, I got "GetAdapterInfo() Failed".
adomila said:
first and foremost let me caution you in changing the registry, it could crash your system.
HKLM\System\State\Hardware
edit or create a dword Wifi. i think the value for "off" state is "1"
if you are a risk taker, try changing it to 3, 5 or 8. mine is set to 3, the wifi is on, if set to 8, it is connected. i hope this helps.
btw, after i was able to turn the wifi "on" via registry, i am able to turn on/off(toggle) wifi via wireless manager already. i don't turn on/off wifi via registry anymore. i only use the registry to see/verify the values. good luck and let us know how it turns out. thanks.
Click to expand...
Click to collapse
can u tell me how i can go to "HKLM\System\State\Hardware" ? i try using file explorer but i can't found it.. thx..
luyushun said:
When I test the WIFI, I got "GetAdapterInfo() Failed".
Click to expand...
Click to collapse
dude, this could not be fix via registry, definitely. try to do self diagnotics(specifically the "WLAN Module Test" but i'm not sure) to see if the adapter/device is still functioning. your last resort would be to do hard reset or reflash. good luck bro...
makan07 said:
can u tell me how i can go to "HKLM\System\State\Hardware" ? i try using file explorer but i can't found it.. thx..
Click to expand...
Click to collapse
you need a registry application. there a couple these around. i'm using the one that is build in dotfred taskmgr. its free try to google it for the latest version. good luck and oh btw, when you are at it already. the HKLM stand for "HKEY_Local_Machine". good luck...
here is url http://www.dotfred.net/TaskMgr.htm
^^
@adomila
when i change 1 to 3 the wifi on. but how can i connect to wireless lan because it not searching? and it allwasy on. i can't turn off it although i turn off in wireless manager. can u explain to me and thx for your help..
makan07 said:
^^
@adomila
when i change 1 to 3 the wifi on. but how can i connect to wireless lan because it not searching? and it allwasy on. i can't turn off it although i turn off in wireless manager. can u explain to me and thx for your help..
Click to expand...
Click to collapse
hi makan07, i'll try my best to explain, once you are able or successful in turning the wifi on, you should be able to use wireless manager to turn the wifi on and off, you should not be depending on the registry anymore, once you get the wifi on. if you can't turn it off just like you mentioned then i think there is a problem already here, i'm sorry to say but you have to do a hard reset or a reflashing of your OS.
with regards to the searching, try the wifi utility interface/configuration/UI(user interface) found in your settings(connections group of applications). start>settings>connections, there should be a wifi utility icon there, then go to the "Site Survey" try to hit that then re-scan button. this should do the trick, if not, here is the last option but let me warn you first that messing with registry, as I have mentioned, could mess up your system; if you're a risk taker then try changing the registry value to 8 or 5 and see if the icon change to searching. just keep on trying to experiment on the registry values and see if somehthing works out. good luck...
^^
thx for all your help.. my wifi can connected but i still can turn it off. i should use reg edit to off the wifi..
makan07 said:
^^
thx for all your help.. my wifi can connected but i still can turn it off. i should use reg edit to off the wifi..
Click to expand...
Click to collapse
it's good to hear that your wifi could be connected already, at the least. kindly share how you were able to connect it, other might have or encounter in the future the same problem. what value in the registry is needed for the wifi to be connected?
with regards to turning it off. i guess we are out of luck but have you tried other means other than the registry, like turning it off on the wifi settings program group, i mentioned before :
"...(connections group of applications). start>settings>connections, there should be a wifi utility icon there, then go to the "Site Survey" try to hit that then re-scan button..."
there is a menu that also turns the wifi on and off in this area. and other wifi applications.
lastly, i could send you a registry file that you can run directly by clicking/selecting/running or double clicking it, if you have a registry application like resco installed. the said file will update your wifi registry. let me know if your interested.
makan07 said:
^^
thx for all your help.. my wifi can connected but i still can turn it off. i should use reg edit to off the wifi..
Click to expand...
Click to collapse
to turn it off
go to settings/connections
select wifi utility
click menu turn on wifi 5 secs
turn on wifi again
check if this helps
Wifi is on but not able to find ssid
Hi,
Thanks for your help, I tried to change the registery for 3, It show that wifi
is on but not able to search any ssid where PDA of my friend is working.
I tried to set it 5, but it is totally off just like 1. Using value 8 it is directly searching for network but could not find it.
Regards,
Jagjeet Singh
@ all
i still confuse. is every atom life have a wifi problem??, is problem because unofficial rom?
wifi working without sim card
Friends,
I have noticed one thing - When I took out the sim card from my mobile.
It is perfectly working with wifi - I can on it or off it and using internet without
problem.
When I put sim card in, it does not work despite of setting the registry key.
I have tried 2 or 3 different and face the same issue with it.
Then I upgraded the latest ROM from kumara last_final .. 6.1 and same issue.
Does that mean there is some problem with ROM ??
Regards,
Jagjeet Singh
^^
have u try to use original ROM for atom life?
Re:
I have not tried, Do you think this would resolve this problem ...
I am not aware if It works properly on O2 xda Atom ?
Hi Floks,
Can anyone please have a look and suggest something ..
Regards,
Js
Same problem with a brand new Atom Life. When I first used it, I didn't yet insert the SIM and the wifi was working great. But when I inserted the SIM, it couldn't connect to wifi. Moreover, it didn't show the first tab in the ``Wi-Fi'' control panel, labeled ``Wireless'' (the one where the list of available SSIDs and those with saved settings appears).
Changing the registry key doesn't work for me, maybe it is because our wifi network doesn't broadcast SSID and is WPA2-protected with pre-shared key...
Anyway, the only fix that works for me, is to reboot the device repeatedly until the wifi loads correctly. Most of the times it loads on the second try, mut sometimes it takes some 8 or 10 reboots... When it loads well at the boot time,
I even tried to look into the list of device drivers and services, none of them seemed relevant to wifi.
To sum up, I can't seem to find any handy solution to this problem and I'm becoming really desperate for it... Hope I won't have to turn it off very often so I don't have to reboot it like an idiot...
brian_2cool4u said:
to turn it off
go to settings/connections
select wifi utility
click menu turn on wifi 5 secs
turn on wifi again
check if this helps
Click to expand...
Click to collapse
Just register & log in to say thank you for your brilliant solution!
To other hog heads , try this method before posting
brian_2cool4u said:
to turn it off
go to settings/connections
select wifi utility
click menu turn on wifi 5 secs
turn on wifi again
check if this helps
Click to expand...
Click to collapse
Tried the above suggested solution and work perfectly for my Atom!! Thanks..
Here is a question to anyone that has made a ROM with nueUSB cooked into it.
When I set up nueUSB to allow me to see my phone as a USB storage device it works fine. But once I disconnect the phone from the computer the shell32.exe process starts using 100% CPU resources on the phone and the phone runs VERY slow. I think once I left the phone running for awhile and eventually it fixed itself up (like hours later). Usually I just do a soft reset.
The problem occurs whether I use the safely remove hardware feature on my PC or not.
Has anyone else had similar behaviour? Any idea how to fix it besides not using nueUSB?
I haven't had that problem with it ... but I have only used it sparingly ... i haven't left it running long enough to see those issues.
I guess i'll have to give it a try.
tharris297 said:
I haven't had that problem with it ... but I have only used it sparingly ... i haven't left it running long enough to see those issues.
I guess i'll have to give it a try.
Click to expand...
Click to collapse
For me it isn't even a matter of time. If I put it into USB storage device mode as soon as I disconnect it shell32.exe uses 100% CPU. Even right after a soft reset.
I use nueUSB with DCD 3.2.3 all the time, and have never had that issue. Are you using the latest version?
indagroove said:
I use nueUSB with DCD 3.2.3 all the time, and have never had that issue. Are you using the latest version?
Click to expand...
Click to collapse
To be honest, I'm not sure. How can I tell what version I have installed?
I have the one posted here:
http://forum.xda-developers.com/showpost.php?p=2439782&postcount=231
Hmm this issue didn't come up with the 3.2.4 ROM I cooked earlier today (before all the links were removed). Maybe it was a one-time thing.
unL33T said:
Hmm this issue didn't come up with the 3.2.4 ROM I cooked earlier today (before all the links were removed). Maybe it was a one-time thing.
Click to expand...
Click to collapse
The newest one has the "connect internet sharing" option. The first version didn't have it, and some other bugs.
indagroove said:
The newest one has the "connect internet sharing" option. The first version didn't have it, and some other bugs.
Click to expand...
Click to collapse
If I plug in the USB cable the PC Connect Detected box comes up. If I then click on Menu the Start Internet Connection Sharing option is there. I used the same version on both DCD3.2.3 and DCD3.2.4. DCD3.2.3 was the one with the issue although I am noticing that on 3.2.4 nueUSB doesn't always come up when I connect a USB cable.
Apparently I didn't do enough testing because the problem is now back on 3.2.4 as well...
Hi Experts,
Sorry if I sound a little crude and maybe a novice(I am), but I have been a Symbian user so far and finally decided to take the plunge to Android. I received my HTC Hero a couple of days back and tried to connect to Android Market with my google account, but in vain. Tried to use the Google Mail app, but again failed. Am I missing something here? Tried to use HTC Sync with my lappy, but no success.
Provider: Orange UK.
Connectivity: Wifi (No data plan on Sim)
Laptop OS: Win 7 64-bit (connecting usin USB cable)
I have read a lot of threads on xda and on the internet and tried quite a few things, but no success.
Thanks in advance,
Jag
Closing thread as there is another one though not for UK. Will wait for that to resolve.
jag_on_xda said:
Closing thread as there is another one though not for UK. Will wait for that to resolve.
Click to expand...
Click to collapse
i cannt access thro wi-fi
jag_on_xda said:
I received my HTC Hero a couple of days back and tried to connect to Android Market with my google account, but in vain. Tried to use the Google Mail app, but again failed. Am I missing something here?
Click to expand...
Click to collapse
I had the same problem, and some packet sniffing showed that Android tries to contact google on port 5228/tcp. Our work wifi firewalls non-standard ports, presumably this is why I cannot download from the market (Hangs forever at "starting download") or sign into gtalk over wifi. Switching to 3G data, everything works fine (though the Market stalls a lot).
I had an issue where it wouldn't accept my details unless I entered them in on the initial setup screen.
i.e. if I skipped past the "set up google mail" bit, and went back later, it didn't work.
workaround was reverting to factory install and making sure to enter my account details at the start (and I used wifi since I was in my home, so it should definately work)
It worked for me after i manually set the APN for my carrier.
Please same problem, HTC Magic 32B Ion 1.6, how can I do?
Yes you should always try to log into google at the very start otherwise some problems can be caused.
Lennyuk said:
Yes you should always try to log into google at the very start otherwise some problems can be caused.
Click to expand...
Click to collapse
All OK!
I did a wipe and all ok
How am I supposed to do this after a factory reset if I connect thru wifi, since I must first enable wifi radio and then put a password, so that means I would have to skip the "wizard" so that defeats the purpose of factory resetting everything... please help.
Solved
Logically, what you say is right, but practically it actually worked
1) after the factory reset, i get the google signin screen,
at that moment, my wifi wont be enabled.....but still i went ahead and entered the username and
password and clicked the signin button
as expected it throwed a message saying "it cant connect"
along with it it also said may be you are not on wifi with a
"connect to wifi button", which will take to the wifi screen where you can connect to wifi and it comes back to the google signin screen, where you login again....
.............there you go it signs in successfully now.
Hope this helps
I have this same issue on my galaxy s. Even factory reset and singing in at the beginning doesnt help. What should i do?
mikko96 said:
I have this same issue on my galaxy s. Even factory reset and singing in at the beginning doesnt help. What should i do?
Click to expand...
Click to collapse
Hi
I am facing the same problem with my device (Galaxy S2). I am able to surf web with the stock phone browser using wifi, but apps won't connect. Apps connect only through GPRS.
I was wondering if you were able to resolve the issue. Could you please help me ?
Anyone else has a solution to this problem.
My phone has the stock firmware, purchased the phone today.
Apps have never worked over wifi, but the browser works.
Cannot download anything on wifi, for that only my GPRS/3G works.
Please help
I have been using my desire for over a year and it has been great, but now I also have this problem of no market or google mail over my WiFi. I was going to do a factory reset and start again, but after reading the posts on this thread this may not resolve the problem.
Has anyone found a fix for this problem
I have this problem too. I doubt it's the manufacture deliberately use its stock sbf to stop people using wifi to save data bandage. So they can make more money with the mobile operators!!
http://forum.xda-developers.com/showthread.php?t=1281034
me too I guess
well i was having a similar problem(would connect to wifi, the browser worked but not the apps).in my case, i have my router setup with the dhcp server off(you have to assign an static ip address manually to every device you that you are going to connect to the router) i solved my problem by enabling the "use static ip" check box and filling all the information(ip address, gateway, netmask, dns 1 and dns 2)on the advance settings tab in wifi settings.
After the recent update(47.1.A.12.34), I have a Wi-Fi connection problem that does not connect to the router or hardly connects. This problem is resolved only by rebooting the phone, but then for the second and third times ... no longer connects and requires rebooting. This is a problem for me and my two other friends.
What is the solution to this problem?
please help me :crying::crying:
I am having similar problem on XZ Premium too after last mounth update and it is still not fixed with this new firmware. Waiting for fix from Sony.
tomo100brt said:
I am having similar problem on XZ Premium too after last mounth update and it is still not fixed with this new firmware. Waiting for fix from Sony.
Click to expand...
Click to collapse
Yes, it's true. building number xz1 and premium is one
dn96 said:
After the recent update(47.1.A.12.34), I have a Wi-Fi connection problem that does not connect to the router or hardly connects. This problem is resolved only by rebooting the phone, but then for the second and third times ... no longer connects and requires rebooting. This is a problem for me and my two other friends.
What is the solution to this problem?
please help me :crying::crying:
Click to expand...
Click to collapse
Same here Oukitel U16 Max
Skickat från min U16 Max via Tapatalk
What is the solution to this problem?
Does not anyone know the solution?
dn96 said:
Yes, it's true. building number xz1 and premium is one
Click to expand...
Click to collapse
Follow the steps below and report the result to me:
1 - factory reset router and Re-Configure your router again.
2. Reset Wi-Fi network settigns:>>>Go to Settings -> Network & Internet -> tap on the 3-dots icon on the top right corner -> Reset network settings -> Confirm by tapping "RESET SETTINGS"
3. Reboot your phone.
4- Repeat step 2(reset Wi-Fi network settigns)
5. Now connect to Wi-Fi.
Make sure you tell me the result.tnx
If I flash a different región firmware will bands be restricted? Or why do I get the impression that after flash generic central europe lte+ or 4.5g dissapears for me? I mean lte and 4g are working fine but never connects to the other.. Currently in México
?????????????????????????????????????????????????????????
tomo100brt said:
I am having similar problem on XZ Premium too after last mounth update and it is still not fixed with this new firmware. Waiting for fix from Sony.
Click to expand...
Click to collapse
Follow the steps below and report the result to me:
1 - factory reset router and Re-Configure your router again.
2. Reset Wi-Fi network settignsblush>>Go to Settings -> Network & Internet -> tap on the 3-dots icon on the top right corner -> Reset network settings -> Confirm by tapping "RESET SETTINGS"
3. Reboot your phone.
4- Repeat step 2(reset Wi-Fi network settigns)
5. Now connect to Wi-Fi.
Make sure you tell me the result.
Previously had same issue with a Z5 and after months of blaming sony, turns out, it was router configuration... maybe the steps by @dn96 will fix this for you, im on 47.1.A.12.34 and this problem is not present
So far no issues with this update...
dn96 said:
Follow the steps below and report the result to me:
1 - factory reset router and Re-Configure your router again.
2. Reset Wi-Fi network settigns:>>>Go to Settings -> Network & Internet -> tap on the 3-dots icon on the top right corner -> Reset network settings -> Confirm by tapping "RESET SETTINGS"
3. Reboot your phone.
4- Repeat step 2(reset Wi-Fi network settigns)
5. Now connect to Wi-Fi.
Make sure you tell me the result.tnx
Click to expand...
Click to collapse
I have the same issue. There is no way, I am going to do a factory reset of my router with 20+ devices connect and a customized configuration to try and resolve an issue clearly limited to my XZ1.
I have the same issue at home and at work, and again only on my XZ1, so this is clearly a phone and not router issue. Problem goes away by rebooting the phone, but then re-emerges after anywhere between a day and a week. Very annoying.
pallegd said:
I have the same issue. There is no way, I am going to do a factory reset of my router with 20+ devices connect and a customized configuration to try and resolve an issue clearly limited to my XZ1.
I have the same issue at home and at work, and again only on my XZ1, so this is clearly a phone and not router issue. Problem goes away by rebooting the phone, but then re-emerges after anywhere between a day and a week. Very annoying.
Click to expand...
Click to collapse
Do this and report me:
*** On some occasions, you can turn off / on airplan mode. This does not require rebooting
dn96 said:
Do this and report me:
*** On some occasions, you can turn off / on airplan mode. This does not require rebooting
Click to expand...
Click to collapse
Thank you for your advice! I have tried all those setting and will see if this resolves the problem in the coming days.
Airplane mode on/off has not worked in the past.
pallegd said:
Thank you for your advice! I have tried all those setting and will see if this resolves the problem in the coming days.
Airplane mode on/off has not worked in the past.
Click to expand...
Click to collapse
Turning on / off the airplane mode responds after this method and is not responding normally:good:
Go to developers options in settings /System
Then turn on "Enable wifi verbose logging"
This will solve the problem
pallegd said:
Thank you for your advice! I have tried all those setting and will see if this resolves the problem in the coming days.
Airplane mode on/off has not worked in the past.
Click to expand...
Click to collapse
Hey! Did it help you or other people experiencing this problem?