My 8525 is stuck trying to update at 11%.....any help?
Looks like your Radio ROM may have been stuffed.
About the ONLY thing you can try is to re-install the SHIPPED STOCK ROM. WM06 updates will also be OK as they have the same CID but DON"T try any other stock rom.
Also, make sure Hard SPL is installed and try the sd card method. May have more success than with the PC.
1. Format sd card (2Gb or less) FAT32.
2. Copy .nbh file of the rom you want onto sd card and rename to hermimg.nbh .Insert back into Hermes.
3 Put Hermes into bootloader - hold power, OK button above flywheel and reset with stylus, hold ALL buttons in until you get to ttri-colour screen. If you have done everything right, follow the prompts.
If this doesn't work then you no longer have a phone. Will work as a PDA but NOT a phone ever again....
Good Luck...
ill try it again when i get home.... but as to get it out of bl screen?
ultramag69 has explained how to upgrade it, just reset the phone then enter bootloader again by doing as he said
3 Put Hermes into bootloader - hold power, OK button above flywheel and reset with stylus, hold ALL buttons in until you get to ttri-colour screen. If you have done everything right, follow the prompts.
then try flashing your carriers original rom
Related
After i flashing, installing software....when soft-reset...It can't enter the window!!!! Who can help me??? Isn't it can't fix?
What is your SPL - hold power button, ok button above the flywheel and rset with stylus. Hold all buttons in until you come to the tri-colour screen. You should now be able to see your SPL. reset with stylus to exit.
If its not 2.10 olipro (Hard SPL v7) then your in for a lot of hair pulling and a heap of reading...
Try a hard reset. hold both softkeys in and reset with stylus. Hold all buttons in until it asks if you want to reset to factory. Hit r then space. It should now go back to the setup screen. All contacts will be lost but as you just flashed, everything was gone anyway.
Try using the sd card method (ONLY IF YOU HAVE HARD SPL - 2.10 OLIPRO)
1. format 2Gb or less sd card fat32. Copy .nbh file of the os you want on it and rename to "hermimg.nbh".
2 insert sd card into phone and go to bootloader (tri-colour screen as above)
3. If you did this right, follow instructions..
Hope this helps...
Cheers...
i installed a new rings rom. it worked fine, then my phone froze up, now it won load pass the opening page. it just says analyzing device component..... and its frozen there. please help, i run my company thru my phone and its very important...
what type of phone do you have? if its a G1 as i have then its easy to un-brick or un-lock...just plug your phone to your PC and format your sdcard again which will erase all of its data then ya good to go or you can remove the battery place it back then hold down your home plus power button at the same time till youir phone boots to the next screen then press alt+L then altW then reboot your phone and sign back in...
if this is a post about the g1 take it to the other forum because this is about the hermes
its a herm 100. htc 8525
have you tried to do a hard reset? If not give that a try.
I hope you installed Hard SPL V3 on it first... to check - hold power, OK button above the flywheel and reset with stylus, hold in until the tri-colour screen appears. Will show IPL - 1.04 and SPL - 2.10oli (if you've installed hard SPL V7).
If so, and you tried to Hard Reset 1st with no success, try the sd card method. If thats not working, on the pc, if using XP, go to activesync's connection settings and untick "Allow USB Connections". Connect your Hermes to the pc with usb after going to bootloader. Run the RUU_Wrapper.exe file again. This should re-install the rom.
You're gonna have a heap of trouble if you haven't Hard SPLed your Hermes.
Good Luck....
I dont have hard spl v3 on my phone. when i try to load another rom or anything i get error 270 the image file is corrupted. please check your update utility. what does that mean? and how can i work thru that?
i just flashed my rom to natf 4.0 and it says this beta software has concluded, and there is a white screen stuck on my fuze and it wont do anything, it wont even connect to active sync so i can re flash it i need help big time, phone not working, i run a business,i have no other phone, what can i do.
Did u HardSPL before flashing ? If not do so. See here
http://forum.xda-developers.com/showthread.php?t=448008
If yes u do not need Activesync, u can flash a ROM (NOT THE HARDSPL) from the SD Card as well
See:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Taken from this, thread
http://forum.xda-developers.com/showthread.php?t=448008
Did u try a Hard reset, this is mentioned in Step 10, just in the above instruction.
And last, Why did u take the 4.0, the ROM is at 4.7 according to
http://forum.xda-developers.com/showthread.php?t=469450
here
Hopefully someone can help me here
I have an HTC Mogul that I am trying to flash over to a custom ROM. Unfortunately I got a little too gung ho and didnt flash the radio over, so now the phone freezes at the HTC splash screen on start up. I have tried flashing it back to a carrier rom or even another custom rom but it gets to the loading bar and then fails out. Have tried flashing from the SD card but every image i put on there says that there is no valid image on the card.
I have looked high and low for an answer to my problem but have had little to no luck anywhere.
Rawk02 said:
Hopefully someone can help me here
I have an HTC Mogul that I am trying to flash over to a custom ROM. Unfortunately I got a little too gung ho and didnt flash the radio over, so now the phone freezes at the HTC splash screen on start up. I have tried flashing it back to a carrier rom or even another custom rom but it gets to the loading bar and then fails out. Have tried flashing from the SD card but every image i put on there says that there is no valid image on the card.
I have looked high and low for an answer to my problem but have had little to no luck anywhere.
Click to expand...
Click to collapse
Unlocked bootloader -> Custom ROM -> GPS Radio -> Boot
So as long as your bootloader is unlocked (olipro 2.40, no2chem 2.47) then go ahead and flash the Custom GPS ROM you want to use on there. Then flash a GPS Radio I use 3.42.40 and yes I have tested all the others. Then to be totally sure might as well hard reset and pull the battery for a few.
Edit: Tip I figure everyone needs to read. If flashing using RUU method (exe, or utility through usb cable) make sure you dont have a Memory card in the phone. That ensures no problems will arise like bad flashes.
If using microSD card then make sure its not plugged in while flashing. Card must be 2gb and under and be formatted fat 32, image must be named TITAIMG.nbh and be the only thing on the card, no files or folders but the .nbh
Also check in your Computers files and folders settings and make sure you have it selected to Show File Extensions. That way you know the files are getting named and assigned correctly.
The problem I am having right now is the bootloader seems borked. It will not load any files. any that i put on the card it flashes up quick and says no image file found and then back to the bootloader screen and if i try usb it goes to the point where the progress bar comes up and then errors out. Is there a way to flash the bootloader without loading into WM?
Rawk02 said:
The problem I am having right now is the bootloader seems borked. It will not load any files. any that i put on the card it flashes up quick and says no image file found and then back to the bootloader screen and if i try usb it goes to the point where the progress bar comes up and then errors out. Is there a way to flash the bootloader without loading into WM?
Click to expand...
Click to collapse
What bootloader is on there now? You should of already mentioned this in your first post, let alone your second..
Also what size memory card are you using, I hinted at that already too.
Yeah that would help
Here is what is at the top of the Bootloader:
TITA100
SPL-1.07.0000
CPLD-9
I am using a 2 gig card, tried with a 1 gig it would get the to loading screen and freeze
Rawk02 said:
Yeah that would help
Here is what is at the top of the Bootloader:
TITA100
SPL-1.07.0000
CPLD-9
I am using a 2 gig card, tried with a 1 gig it would get the to loading screen and freeze
Click to expand...
Click to collapse
Yea you messed up, you need to flash an unlocked bootloader from a functioning WM. There are ways around it and to get out of your jam.
Tell me what the phone does after unplugging it, removing the memory card, taking the battery out and letting it sit for a couple minutes. Put only the battery in and turn it on.
I need to know if it tries to boot the OS and gets stuck or if it goes to bootloader automatically.
it tries to boot to WM, goes to the HTC logo and then freezes, i still have to hold down the camera button to boot into the bootloader
Rawk02 said:
it tries to boot to WM, goes to the HTC logo and then freezes, i still have to hold down the camera button to boot into the bootloader
Click to expand...
Click to collapse
Thats not how you get into bootloader on a Titan.
Manual Bootloader mode on a Titan = Power Button + Camera Button + Reset Button (hole next to memory card slot) for a couple seconds then release.
Ok now next information that you forgot to post. What HTC Mogul is it P4000, VX6800, PPC6800, or other variant. What carrier branding is it, like what stock ROM was originally on there. Sprint, Verizon, Qwest. Exe.
I need to know this as well so we are not just trying things to you get it. I want to write you a walkthrough that hits the nail on the head.
PPC6800
Old Carrier was USCC
and it may just be this version but to get into bootloader I have just been holding down camera then at the same time holding down power holding it for a few seconds then releasing the power and it goes into BL
1: Download the following files from my HTC to Windows Unlock Tools directory. Download the Titan_Relocker.exe, a GPS radio of your choosing, and the titan_spl_olipro240.exe.
2. Now make sure you have Active Sync 4.5 installed first then the HTC windows drivers installed second (from my HTC unlock directory on my share site). Now install both of those and restart the computer, start from a fresh PC. Now disable the Active Sync usb connections just right click the Active sync icon on your PC's taskbar. Pick connection settings and then look for the Box with Allow USB connections. Clear the box (disable) the usb connections.
3. Take out the storage card and now manually put the phone into bootloader "power camera reset" and then plug the phone into the PC using a MAIN port built into the Motherboard (no hub, no front usb panel). Now use Winrar, or 7zip to extract the contents of the Titanrelocker.exe into a folder. You will then see the ROMupdateutility.exe and ExitBL.exe with a bunch of other files. Ok now Run the ROM update utitlity.exe from the extracted folder and let it flash The Stock SPL. When it is done follow the prompts on screen. Now if it reboots back to olipro bootloader then run the Exitbl.exe and soon as it reboots wait till after the first splash screen and Unplug the phone.
4. Now manually put the phone into bootloader "power camera reset" (so it restarts and goes back to bootloader). Now we are going to flash the Olipro 2.40. Use Winrar, or 7zip to extract the contents of Olipro 2.40.exe into a folder. You will then see the ROMupdateutility.exe and ExitBL.exe with a bunch of other files. Ok now Run the ROM update utitlity.exe from the extracted folder and let it flash Olipro 2.40 When it is done follow the prompts on screen. Now if it reboots back to olipro bootloader then run the Exitbl.exe and soon as it reboots wait till after the first splash screen and Unplug the phone.
5. Now manually put the phone into bootloader "power camera reset" (so it restarts and goes back to bootloader). Now you can flash a Custom ROM using RUU method or go ahead and use the microSD method.
a. You can use an RUU utility to flash the custom ROM while its still plugged in and in bootloader.
b. You can flash the custom ROM with a Micro SD card, just unplug the phone and put the card in and manually put the phone in bootloader again using power + camera + reset all at the same time for a second or two.
6: When the ROM is done installing you MUST flash a GPS radio version 3.35 and up if you are using a GPS ROM. If you use RUU method you have to perform a hard reset after flashing the radio. If you use the Micro SD method you do not have to Hard Reset.
Still it is a good idea to hard reset and then pull battery for a minute to make sure the page pool is set.
on #3 flashing it back to the stock SPL i get the same error as I have been getting, it goes to the progress bar on both the computer and phone, sits at 0% for about 30 seconds then the computer gives error 262
ok finally got it to respond to the SD card, but it has been sitting on a grey screen saying loading for a good 6 hours now, i have a feeling that this is going to take some low-level editing with mtty
I have no Idea what to do it look like Memory Clear and SPL come up for a split second then it just goes to boot screen and hangs up with Radio Info I have tried to boot from SD also any Ideas? I was using Ski's Max Thanks
Madhat23 said:
I have no Idea what to do it look like Memory Clear and SPL come up for a split second then it just goes to boot screen and hangs up with Radio Info I have tried to boot from SD also any Ideas? I was using Ski's Max Thanks
Click to expand...
Click to collapse
It seems that it is stuck in bootloader. Try to flash a stock rom and see if it solves the issue. Remove any sd card you may have in there. More than likely, you flashed a rom for another device or your phone ran out of battery during the your last flash.
egzthunder1 said:
It seems that it is stuck in bootloader. Try to flash a stock rom and see if it solves the issue. Remove any sd card you may have in there. More than likely, you flashed a rom for another device or your phone ran out of battery during the your last flash.
Click to expand...
Click to collapse
It will not even get out of the Steam Rom Boot screen so usb will not work and and a SD load will not either I think I'm done
Thanks
Madhat23 said:
It will not even get out of the Steam Rom Boot screen so usb will not work and and a SD load will not either I think I'm done
Thanks
Click to expand...
Click to collapse
Try to put it in the tri-colored screen (bootloader), connect the device to the computer (the writing on the screen will change from "Serial" to "USB", then try to flash. Good luck!
Same happened to me.. This is what I did
Same thing happened to me from using Ski's Rom with Max Dusk.. The rom would freeze and I would have to reset multiple times then one day it wouldn't do anything
This is what I did
1. hold down the Power, Vol Down, and the Enter key (which is the middle of the scroll circle)
2. hold these down until it asks you to press one of the vol buttons (I think it was up) to revert back to the last rom that was loaded this will Hard Reset the last loaded rom
3. after doing the Hard Reset, get an SD card and make sure it is 32 bit formatted so that you can Hard SPL using the SD card
4. after it is unlocked, copy your stock carrier rom onto your SD card and call it RAPHIMG.NBH (the phone will use this rom to flash when in tricolor mode)
5. Put your phone into tri-color mode by holding Power, Vol Down, and the reset button underneath
6. follow instructions on screen and dont reset until the screen says it is complete
you now have a reflashable phone or at least one that works
sorry details are sketchy, and I can't link the original threads right now, but this worked for me