i just flashed my rom to natf 4.0 and it says this beta software has concluded, and there is a white screen stuck on my fuze and it wont do anything, it wont even connect to active sync so i can re flash it i need help big time, phone not working, i run a business,i have no other phone, what can i do.
Did u HardSPL before flashing ? If not do so. See here
http://forum.xda-developers.com/showthread.php?t=448008
If yes u do not need Activesync, u can flash a ROM (NOT THE HARDSPL) from the SD Card as well
See:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Taken from this, thread
http://forum.xda-developers.com/showthread.php?t=448008
Did u try a Hard reset, this is mentioned in Step 10, just in the above instruction.
And last, Why did u take the 4.0, the ROM is at 4.7 according to
http://forum.xda-developers.com/showthread.php?t=469450
here
Related
After i flashing, installing software....when soft-reset...It can't enter the window!!!! Who can help me??? Isn't it can't fix?
What is your SPL - hold power button, ok button above the flywheel and rset with stylus. Hold all buttons in until you come to the tri-colour screen. You should now be able to see your SPL. reset with stylus to exit.
If its not 2.10 olipro (Hard SPL v7) then your in for a lot of hair pulling and a heap of reading...
Try a hard reset. hold both softkeys in and reset with stylus. Hold all buttons in until it asks if you want to reset to factory. Hit r then space. It should now go back to the setup screen. All contacts will be lost but as you just flashed, everything was gone anyway.
Try using the sd card method (ONLY IF YOU HAVE HARD SPL - 2.10 OLIPRO)
1. format 2Gb or less sd card fat32. Copy .nbh file of the os you want on it and rename to "hermimg.nbh".
2 insert sd card into phone and go to bootloader (tri-colour screen as above)
3. If you did this right, follow instructions..
Hope this helps...
Cheers...
My 8525 is stuck trying to update at 11%.....any help?
Looks like your Radio ROM may have been stuffed.
About the ONLY thing you can try is to re-install the SHIPPED STOCK ROM. WM06 updates will also be OK as they have the same CID but DON"T try any other stock rom.
Also, make sure Hard SPL is installed and try the sd card method. May have more success than with the PC.
1. Format sd card (2Gb or less) FAT32.
2. Copy .nbh file of the rom you want onto sd card and rename to hermimg.nbh .Insert back into Hermes.
3 Put Hermes into bootloader - hold power, OK button above flywheel and reset with stylus, hold ALL buttons in until you get to ttri-colour screen. If you have done everything right, follow the prompts.
If this doesn't work then you no longer have a phone. Will work as a PDA but NOT a phone ever again....
Good Luck...
ill try it again when i get home.... but as to get it out of bl screen?
ultramag69 has explained how to upgrade it, just reset the phone then enter bootloader again by doing as he said
3 Put Hermes into bootloader - hold power, OK button above flywheel and reset with stylus, hold ALL buttons in until you get to ttri-colour screen. If you have done everything right, follow the prompts.
then try flashing your carriers original rom
I am trying to flash with SSK 1.5 and i already successfully followed the instructions on how to unlock the phone using Hard SPL specifically for the verizon version. Now... i cannot enter bootloader mode at all which means i cannot flash the device.
Also, as a side note... would i need to flash a new radio if i flash a new ROM like SSK 1.5?
once you have unlocked your device you do not need to enter bootloader mode to flash a custom Rom. follow this to the T.
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Help: Please
I have tried all the instructions, but the problem is when in goes into bootlader(it does it automaticaly), the pc doesnt see the phone. I tried the USB to PC, unchecked & still doesnt work. Im really fustrated, as I have been trying to do this for at least 6 hours. Help me get the PC to see the phone in bootload. Thanks
moonzbabysh said:
once you have unlocked your device you do not need to enter bootloader mode to flash a custom Rom. follow this to the T.
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Click to expand...
Click to collapse
Quick ROM install:
Rename the NBH to: RAPHIMG.nbh
Copy to SD card root.
Manually enter bootloader:
Hold Volume Down, Power Button and soft reset. HOLD all 3 until Boot Loader flashes on.
It will say push Power button to start flash, do it and you're golden...
I was having some issues flashin' from my work laptop the other week, so I started doin' this. Nice thing too is can flash different rom's without ever needing to be connected to my PC.
Enjoy!
I have a alltel touch pro, that I CANT GET TO FLASH. I dont understand the problem. I keep reading the install procedures and whenever it actually gets to the status bar on the phone....it quits....am i forgetting to do sumthin before i install??
I take it you correctly unlocked your phone using the correct Hard SPL if not go here for instructions http://forum.ppcgeeks.com/showthread.php?t=42503
How to Flash Via PC:
1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
If that fails please trying these directions (thanks sn0b0ard)
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Flash from microSD Card (Thanks to MadlyAlive):
1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.
i just got a startek ph off ebay and after 2 wks wait came in the mail without the usb cable, i am trying to get into bootloader mode to flash it with sd card and cant figure out after searching like crazy how to get it into bootloader mode.
here is what i have done.
1. got the micro sd card formated to fat32/512bytes
2. copied the STARIMG.nbh on the card
3. started the ph
4. held both the single biuttons on the side of the flip top and it wont do squat.
i read the instructions. but cant figure out the record button, which one is it... off the 4 buttons on the top 2 are for vol control one for camera and 4th one i am not sure of so i held that with camera and no-go
, start the bootloader (The bootloader is invoked by pressing down the Record button and Camera button at the same time).
what am i missing??
Hi
I don't know anything about flashing to new rom from SD
but about bootloader mode on startrek , you can see this thread .
Good Luck !
Same Problem
I'm having a similar problem. When I run enterbootloader.exe, it searches the SD card but says 'invalid certificate'. I can't do the record and camera button sequence because my charging connector is broken. Please help me!!!
1. you must copy the STARIMG.nbh on the root of memory card ( not in a folder )
2. also , if you use the official rom , you must first unlock application . ( for locked phones , sda unlock is necessary , too )
1. you must copy the STARIMG.nbh on the root of memory card ( not in a folder )
Click to expand...
Click to collapse
I did that, and i think my phone is SDA unlocked, but I can't run it just in case, my charging connector is broken. I flashed from SD to my current ROM from Erofich's v9c, and it worked. I just started SoftSPL from the start menu.
EDIT- Problem Solved. See my next post for what I did.
Bootloader mode
1. Find an official ROM (It has to be official, or you'll get Invalid Certificate error.)
2. Extract STARIMG.nbh (or whatever it's called) from it.
3. Place the STARIMG.nbh into the root of a FAT32 formatted SD Card. (If there are files already there, you don't have to delete them, my startrek just finds the STARIMG if it's in the root.
4. Put the SD into your device.
5. make sure your device is turned off.
6. Press and hold the Camera (bottom right) and record (bottom left) buttons, and while holding them press the power button for about half a second, then let go.
7. Wait about 5 seconds for bootloader to appear.
8. 'Flash from SD? Press this <- Button.' (Press the button it points to, not the left softkey)
9. Wait
10.
If you need SDA App unlock or anything like that, or to get into bootloader mode to flash an UNofficial ROM, you must start flashing an automated ROM (with the batch/cmd window), and close it when it puts the phone in bootloader for you.
So thanks for sharing your explanation .