I have a alltel touch pro, that I CANT GET TO FLASH. I dont understand the problem. I keep reading the install procedures and whenever it actually gets to the status bar on the phone....it quits....am i forgetting to do sumthin before i install??
I take it you correctly unlocked your phone using the correct Hard SPL if not go here for instructions http://forum.ppcgeeks.com/showthread.php?t=42503
How to Flash Via PC:
1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
If that fails please trying these directions (thanks sn0b0ard)
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Flash from microSD Card (Thanks to MadlyAlive):
1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.
Related
Ok so heres an update of what I have managed to do so far:
1.) I ran a file called titan_SPL_2.40-olipro.exe
~This seemed to kick me into a "Rainbow" screen. So at this point the program told me it was done, but not matter how many time I reset it I came back to the rainbow screen. So at this point I
2.) Ran a file called titan_radio_3.27.00.exe
~This file was required for the DCD2.3.2-Alltell.exe file, so I ran the radio file. All went well till it tried to reboot. Now all I get to is a splash screen that says Alltel. The first screen that says HTC does recognize the radio as being 3.27.
So I search and search and I then tried to famous MicroSD bootloader trick. So I take the nbh file out of the firmware installer that I was going to install, rename it to TITAIMG.nbh, I format my SD card as Fat32, I copy the file over to the SD card. I put the SD card in, I hold the record and power button down and press reset... then nothing. Just a black screen. I would like to note that while its at this black screen and I plug in the USB cable to my computer, the computer sees it as a data connection.
I'm so lost on this. All I want to have in the end of this is a working Alltel phone with GPS, so that I can use Tomtom 6 to use this $549 PPC as a GPS device.
Thank you ahead of time.
[SOLVED]
Wow I am so stupid... I was holding the Voice Command button and the power button, when I should have been pressing the Camera and Power button. LOL
Heres where I found my solution: http://forum.ppcgeeks.com/showthread.php?t=17909&page=2
and in case it gets taken down:
Found a solution. This is needs to be done once you load the DcD rom 2.3. Your phone will freeze at the splash scree. Follow the steps below to get the boot loader screen back up. Your computer will then see your phone. DONT RUN HARD-SPL... Run the RRU radio instead. Windows mobile should start right up after the auto soft reset.
Steps For Install:
1. put phone in boot loader mode can do so by holding in power button and camera button at the same time while pressing in soft rest button
2. run the unlocker and follow the on screen instructions
3. then flash phone with rom of your choice, phone will reboot and be stuck at splash screen put phone back into boot loader mode
4. then run the radio upgrade and follow on screen instructions and you should be all set
Deleted, seen that you solved it.
I am trying to flash with SSK 1.5 and i already successfully followed the instructions on how to unlock the phone using Hard SPL specifically for the verizon version. Now... i cannot enter bootloader mode at all which means i cannot flash the device.
Also, as a side note... would i need to flash a new radio if i flash a new ROM like SSK 1.5?
once you have unlocked your device you do not need to enter bootloader mode to flash a custom Rom. follow this to the T.
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Help: Please
I have tried all the instructions, but the problem is when in goes into bootlader(it does it automaticaly), the pc doesnt see the phone. I tried the USB to PC, unchecked & still doesnt work. Im really fustrated, as I have been trying to do this for at least 6 hours. Help me get the PC to see the phone in bootload. Thanks
moonzbabysh said:
once you have unlocked your device you do not need to enter bootloader mode to flash a custom Rom. follow this to the T.
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Click to expand...
Click to collapse
Quick ROM install:
Rename the NBH to: RAPHIMG.nbh
Copy to SD card root.
Manually enter bootloader:
Hold Volume Down, Power Button and soft reset. HOLD all 3 until Boot Loader flashes on.
It will say push Power button to start flash, do it and you're golden...
I was having some issues flashin' from my work laptop the other week, so I started doin' this. Nice thing too is can flash different rom's without ever needing to be connected to my PC.
Enjoy!
i just flashed my rom to natf 4.0 and it says this beta software has concluded, and there is a white screen stuck on my fuze and it wont do anything, it wont even connect to active sync so i can re flash it i need help big time, phone not working, i run a business,i have no other phone, what can i do.
Did u HardSPL before flashing ? If not do so. See here
http://forum.xda-developers.com/showthread.php?t=448008
If yes u do not need Activesync, u can flash a ROM (NOT THE HARDSPL) from the SD Card as well
See:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Taken from this, thread
http://forum.xda-developers.com/showthread.php?t=448008
Did u try a Hard reset, this is mentioned in Step 10, just in the above instruction.
And last, Why did u take the 4.0, the ROM is at 4.7 according to
http://forum.xda-developers.com/showthread.php?t=469450
here
How do you install RUU "Gingerbread 2.11.605.0"
*****WARNING*****
**Following the directions below WILL WIPE YOUR DATA!!!! (Apps, settings, anything NOT on your sdcard WILL be gone.)**
**If you choose to install this the ONLY way to get back to stock is to s-off and root your phone. It is also possible that you won't get OTAs with this installed but I'm not sure. If that's the case you would have to come here and follow this same process with the new OTA file plus lose your data again.**
Now that's out of the way here you are:
Go this thread:
http://forum.xda-developers.com/showthread.php?t=1232017
Download the file in the third link to your phone. Rename it to PG05IMG.zip exactly and put it on the root of your sdcard. (not in any folders) Power off your phone and pull the battery. Put the batt back in and hold volume down + power untill the white hboot(bootloader) screen appears. Once there if it says fastboot you will need to select bootloader by moving up and down with the volume keys and selecting by tapping the power button. Once in the bootloader it will automatically find the file and ask you to press vol up to update. **Make sure your battery is charged to at least 40%**
When its done updating select reboot by tapping the power button and your done.
Sent from my HTC Thunderbolt
Hello everyone!
I have tried researching before asking for help, but I don't seem to find a solution.
I have today partitioned my SD (when will I ever stop fiddling I wonder? ) using CWM recovery.
I have lost access to my SD Card and cannot mount it any longer.
I have Googled today, and the advice was to flash a stock rom again ( I9100XWLPF_I9100OXILP6_I9100XXLPX_HOME.tar) and use the "clear storage" option.
So, I flashed 4.0.3 stock again.
Whenever I follow the steps highlighted here:
1. Shut the POWER OFF, take the battery out and put it back again.
2. Hold the Volume Down button
3. Briefly Press and release the Power button
4. A menu will then appears that let you allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Quickly Press and release the Power button
7. Select Volume Up for YES and Volume Down for NO
I get into download mode instead.
What am I doing wrong? Why can't I get into the bootload menu I need?
Thanks ever so much to whoever offers help, it's much appreciated.
Fastboot isn't in the galaxy s2. Recovery and download modes are the only modes on this device.
You downloaded a stock ROM, which is most probably a .zip file. Extract it on your PC, you'll get a .tar file (don't extract any further).
Download Odin3 on PC.
Boot phone into download mode. Connect phone to PC, and open Odin. A yellow box should show which indicates that Odin has detected your phone. (If not, you need to download the drivers, search and you'll get them).
Select PDA button, and choose the .tar file and flash. Make sure repartition is unticked. Only things ticked should be f.reset (or similar) and auto reboot.
Sent from my GT-I9100 using Tapatalk 2