I upgraded from a mogul to touch pro and unlocked with Raphael_CDMA_HSPL_037
I have loaded about 5 roms on my device and each one hangs at the screen calibration setup dialog (where you press + 5 times on the screen to proceed)
if i attempt to press the + it does not work but if i move my stylus around the screen it will eventually proceed through the steps but restarts calibration screen in an endless loop. its like the drivers arent properly loaded..?
anyone have any thoughts?
EDIT - lllboredlll_1.3-B_SP.exe
seems to have worked. it bypasses the calib screen.
loaded a few more roms and hard reset a few times. now any rom i load seems to work perfectly.
Related
Hi, I both an HTC 8525 from eBay and it worked fine for first few days but yesterday a had first problem. At first his touch screen stopped reacting on touch, i tried rebooting, restoring on factory settings but every time he works for few minutes from the moment i start him and then again the same. My screen doesn't react on touch or if it reacts he opens a program and close it right away by it self, now he started doing that and when i start a program with buttons (not on touch screen). Please tell me is there a way to fix that by my self or should i return it? Please answer quick, thank you...
Factory default? Did it means hard reset? Had You done it? There are 2 ways :
1. Launch clear storage,
2. Handser OFF, press and hold right and left softkey, then do softreset with stylus..
If it still exist, i'm affraid of it's hardware problem, i hope not
Ok So my TFP starts out of the blue rebooting on me from time to time. and then i had to reboot it like 3 times or more to get it to where when i slide to unlock that it would actually unlock instead of have the lock circle on the unlock but never go any place then it would reboot by itself. i got stuck in a loop where no matter how many times i rebooted it got stuck on lock screen and rebooted. so i hit the reset button and jumped in 5.8.2.0 and restored from a back up. it booted up but i noticed that i my home key and setting from the right side did not work. and the lock screen does not come up any more when i turn on and off the device. Anyone have this problem? seems no matter what rom ive tried same results. lock screen no longer comes up right side quick setting no longer work. i did wipe everything before flashing. also for a side not tried to restore to stock image from my backup and got error while it was trying to put the data folder back. ive always used the 5.8.2.0 so not sure what the hell is going on. Any help would be appreciated. Almost feels like there is a problem with my primes memory.
My tablet is HKC P077A with 8GB ROM, 512 RAM and a 7'' Touch screen (Android 4.0.3). I am having 2 problems
When I switch on the tab, first "HKC" logo comes to screen and then disappears to show "android". This is standard. But after that the thing wont move forward. Just keeps on showing "andriod" with a flashing like thing implying the loading process. But after long wait there is no start screen and nothing changes. It just hangs there....
But if somehow got it to get into normal working(I donno how, but It sometimes boots ok and gets into normal working mode, with home screen and apps and everything). So once I get it right the other problem I am having is that the touch is giving VERY bad response. I have to click at spots multiple times to select that thing. Also the response is very slow. Its like the tablet is hanged. But when I tried connecting a mouse (through OTG) and everything works fine again. Is my touchscreen gone bad..??
I am already done with, reset (from "settings> backup and reset") [I cant find how to do factory reset on this model from "off" state(read below)]
I have tried to get into reset screen by pushing "Power Button+Vol up" button. Then I know the tab gets turned on (I can hear a small white noise from the loudspeaker) but nothing comes to screen. So the "Robot with heart open" is never shown. I also tried using "power button + Volume down", this takes me to a screen written in chinese. Now, I don't know Chinese but from the look and feel, its a troubleshooting window, where I can check weather components of my tablet are working (eg. I click one menu(with difficulty), then the front cam turns on, another menu makes loud sounds from speaker and another flashes many colors in screen etc). I found that most are ok except something called "T" (On the screen, its the last item to the right, is it "touchscreen"??)
So, what can I do to get my tab to work smooth again..? Is the touchpad having trouble..? Need I do any specific troubleshooting..?? Any Ideas on which key combinations to get on to the "factory reset" menu from off state..??
Also can u please specify the key combinations to the tablet factory-reset menu from "off" state.
I met the weirdest thing I ever have. I have a galaxy camera gc100, It works very well without any problems. Since I decide to lend it to my friend, I did a factory reset. After the factory reset, everything looks fine and the initial setup screen "Select language" appears. BUT, I can not touch anything on the screen. It seems that the touch is simply unresponsive at all until the screen turns off by timeout. And then I tried (1) hard reboot, (2) go to Maintenance boot mode by pressing power and zoom out and did delete cache and factory reset again. (3) flash stock rom. (4) take out of the battery and then holding pressing the power button for more than 1 minute and then insert the battery and boot. (did three times). But none of them works. This is just weird and I can not find anyone on the Internet having the same issue as me. Other people met unresponsive touch screen and then did hard reset to fix the issue. Mine is entirely opposite. I don't have any problems, but factory/hard reset causing the touch screen is unresponsive at initial setup screen. Do anyone have any clue how I can workaround this issue? Thanks a lot. (Btw the system is still functioning because I can adjust volume and take screenshots by using the physical buttons, and the screen can rotate too).
The touch screen might have been disconnected from the motherboard (if it was poorly treated)
Or water got inside and caused a short circuit.
The touch screen could have failed from age or other cause.
If what you said you did is true, then may have to get it replaced
Also android 4 supports mouse (as a last resort) using an OTG cable.
Hi.
I recently bought a S9+ off ebay and it started to glitch and go into a black screen with only a few icons like the signal bar and battery icon showing. So I tried to reboot and reset the phone through the recovery menu but nothing fixed it.
It just boots up and shows "android is starting" then goes to the black screen and randomly shows that some system process (eg: System UI) has stopped working and gives the options to wait or close it. Neither option does anything. Other than that I'm able to long press the power button and get the power off menu, but can't actually turn it off or restart.
So I tried a stock firmware flash through Odin which completed successfully and the phone booted to the setup screen. But i can't select any other language other than Canadian English cuz the phone will freeze and go into the black screen again. I can only get back to the setup screen by doing a factory reset in the recovery menu. If I continue the setup without changing the language I can get as far as the connect to a WiFi network( which I can't skip cuz I wasn't able to turn off FRP before doing the reset) But when I turn on the WiFi it just loads for a bit and doesn't do anything or display any available networks. And still after a few minutes the phone goes back to the black screen.
I couldn't find any info regarding this issue by searching on Google or the XDA forums.
Please any help regarding this issue is much appreciated.
Thanks