I installed AP 4.0 and had the usual wifi problems.. i tried fixing it , but landed up bricking my device.. now it's stuck in bootloader mode and displays the following :
ATHE400
IPL-v1.00
ATHE400 MFG
SPL-v3.50. Olinex
when i tried reflashing to the Original HTC Rom , it says SPL Sound v1.50 , download before 3.03 not allowed .
HELP!!
hmm, you have a x7500 and the bootloader says athe400?? what have you done, the athe 400 is the x7510. you can not flash a x7500-rom on a x7510-device, and a x7510-rom on the x7500.
problem solved. i flashed back to AP3 and then to AP4 gain.. now my radio and wifi don't work =(
bilalperwaiz said:
problem solved. i flashed back to AP3 and then to AP4 gain.. now my radio and wifi don't work =(
Click to expand...
Click to collapse
usually with the radio u can just go to the dialer -> menu ->band and set according to the band your phone company uses: here in the USA we use 850-900 in europe its usually 900-1900-2100
okay i'll try that , but my radio is 1.500 and i do not know how to update it to 1.57 IF that would make it work
bilalperwaiz said:
okay i'll try that , but my radio is 1.500 and i do not know how to update it to 1.57 IF that would make it work
Click to expand...
Click to collapse
try these 2 links to fix the wifi
http://forum.xda-developers.com/showthread.php?t=387454
http://forum.xda-developers.com/showthread.php?t=405814
upgrading the radio won't fix your problems till you restore the mac address but there are links in the stickies in this forum for radio 1.57 and 1.58
http://forum.xda-developers.com/forumdisplay.php?f=353
Related
i have upgraded a few before
used Olipro's tool, flash SPL, then unlock / CID unlock
flash using file from xda
but this particular unit, HTC branded
everything goes smooth, except when trying to flash WM6, it will get stuck at 1% and then give communcation error.
i can flash back to original HTC rom OR dopod rom, proving CID is indeed unlocked but it just won't flash WM6..
what can be wrong ?
nevermind
used ATHENA_WM6_Flasher instead of ATHENA_X7500_WM6_Flasher and it worked
CHECK GPS
Hi,
I'd the same problem and i found that it stops when it is updating GPS, the rom you've used doesn't have the GPS update, could you please check if the GPS works with the WM6 now or not! mine isn't working even if i downgrade to WM5 .. Wifi is acting strange as well ..
everything seems fine
GPS not working could be related to when using unlocker - step 3
the radio rom is incharge of GPS / wifi / i believe, flashing with original WM5 should fix it if anything
i did double check that STEP 3 is done successfully, and it does work and it confirms that the phone is SIM/CID unlocked, if i try to flash the WM5 rom with the it stops at the GPS part! could it be bad blocks in the NAND or so!
i did try to flash using the Tmob 1.2 DE version that is the only T-mobile Wm5 around, it has the same problem, stopping when updating the SIRFBoodloader.nb, and the error 00018003 in red at the top of the screen that when i use the SD for updating, updating through the cable/windows gives me a communication error... i called HTC asking them for support they forwarded me to the maintenance section and they don't answer there phone .. sh***T
Problems upgrading Athena 7500
I am getting Error 294:Invalid Vender ID
How do I recover from this?
Tks
mflis said:
I am getting Error 294:Invalid Vender ID
How do I recover from this?
Tks
Click to expand...
Click to collapse
use athena's unlocker BY OLIPRO
Tks,from where I can get it?
Athena unlocker download
Here is Athena Unlocker Download
http://forum.xda-developers.com/showthread.php?t=315831
evilgabbie said:
use athena's unlocker BY OLIPRO
Click to expand...
Click to collapse
Don't think that's gonna work if flashing took place before unlocking...but I could be wrong. Hope so. Good luck.
GPS not working
I unlocked, had problems at step 2 (black screen), upgraded to AP3, reboot cycle, got that fixed, upgraded to AP4 and everything is good but no GPS. I'm sure it has to do with the unlock process not completing.
How do I flash just the GPS portion?
Ahtena 7501
AP4 w/addons
dcbrady said:
I unlocked, had problems at step 2 (black screen), upgraded to AP3, reboot cycle, got that fixed, upgraded to AP4 and everything is good but no GPS. I'm sure it has to do with the unlock process not completing.
How do I flash just the GPS portion?
Ahtena 7501
AP4 w/addons
Click to expand...
Click to collapse
What is your radio version. AP4 needs 1,50 or greater. if this is the case upgrade the radio to 1.50 ot 1.57 which is available in this forum.
Good luck
Hi, I'm having problem downloading this file....ftp://[email protected]/Uploads/Hermes/HERM_Radio_Only_1.16.00.00_CustomRUU.rar
Anyone here has a good link.
Have a nice day.
BR,
LogoMan
ftp://xda:[email protected]/Uploads/Hermes/HERM_Radio_Only_1.16.00.00_CustomRUU.rar
You got it here too:
ftp://xda:[email protected]/Hermes/Extracted_Radio_ROMs/HERM_1.16.0.0_type2_radio.rar
But, since it's quite old this radio comes in .nbf format and without Custom RUU.
VivaErBetis said:
You got it here too:
ftp://xda:[email protected]/Hermes/Extracted_Radio_ROMs/HERM_1.16.0.0_type2_radio.rar
But, since it's quite old this radio comes in .nbf format and without Custom RUU.
Click to expand...
Click to collapse
Hi VivaErBetis, I'm having problem unlocking my X01HT using v3a unlocker, it say phone unlocked and still ask for the network code, strange thing is when i type numbers ok button never highlight and my radio version remain 1.46 as i read the FAQ it should be 1.16, can you guide me?
Have a nice day.
BR,
LogoMan
LogoMan said:
Hi VivaErBetis, I'm having problem unlocking my X01HT using v3a unlocker, it say phone unlocked and still ask for the network code, strange thing is when i type numbers ok button never highlight and my radio version remain 1.46 as i read the FAQ it should be 1.16, can you guide me?
Have a nice day.
BR,
LogoMan
Click to expand...
Click to collapse
same here i need to change my radio from 1.46 to 1.14 or 1.16.
i was tried and unlocked done with radio 1.14, after i run v3a automaticaly changed to 1.16. (unlocked done), but when i bought another one.. i get radio 1.46 on my device (x01ht), so i need to install 1.14 or 1.16.
i use ruu custom ftp://xda:[email protected]_radio.rar
and ftp://xda:[email protected]_CustomRUU.rar but did not change my radio ..still 1.46 any solution please.....
regards,
b.
Simlock still there
Hi
Did you reslove this? I have the same problem with a HTC HERM 300. The unlock process runs, but the rom is not updated. There are many blogs telling us that we have to get 1.16 radio version bu not:
- Where from
- how to install it
- how you get in to install/check it if the simlock is still there
Installing the unlocker tool v3a will install radio 1.16. It is part of the update process, when you downgrade your SPL to 1.40. You also downgrade your radio to 1.16.
If you are trying to unlock the xo1ht's, there has been some problems with unlocking this model, try running a search to see what is said.
Cheers...
Also to find the standalone radio rom do a search for "Hermes radio repository", use CRC's mirror as the other 2 don't work. You'll find it there.
hi,
im trying to update the radio on my niki200 and am having problems
i have hard spl 1.22 on there.
when i try to flash radio 1.71.09.01 it gets to 100% then has flash write error 226.
so i then thought that id need to secuity unlock, so tried that and when flashing special radio gets to 95% and locks up
any ideas?
stuck
mine also same problem exactly now i am stuck with having np camera no sound
There is a reason the instructions for SuperCID say to make sure you have HardSPL 1.15 MFG!
but still no answer/solution on this?
xmrjx said:
but still no answer/solution on this?
Click to expand...
Click to collapse
What I did to solve the 95 % problem is to first flash the lowest radio there is Nike Radio 1.58.11.07), then flash the radio from the SuperCID thread, then you can do the SuperCID, and then upgrade to any radio you seem fit. If you read through the SuperCID thread you can see that there are many people with the 95 % problem so there may be more solutions, I would recommend reading through the thread first because there may be other solutions.
I dont know about the flash write error, but this is at least how I fixed the 95 % error, cause it's very annoying
Hi everyone, I need help please. I am trying to flash a WM 6.5 ROM to my NIKI 100 (20 keys) but I cant seem to find a HardSPL that will work on my phone I always end up getting "ERROR[262]" I followed the steps to flash sspl-1.16-NIKE.exe on my phone in order to flash a HardSPL but still the same problem.
I have Official 2.09.405.1 ROM, Radio - 1.65.28.25. If I go into bootloader mode it shows: NIKI 100
SPL-1.22.0000
CPLD-4.
Is there anyone that can tell me wich HardSPL I need?? So far I"ve tried -
flash-HardSPL-Niki, HardSPL-1.15mfg-Nike, HardSPL-1.16.Nike, HardSPL-1.22-Nike-shipped and Flash-uspl-Niki.
Thanks
I tried to downgrande my radio using spl 1.16...
it was stucked at 99% and now even after a hard reset it says: "upgrade rom error" please try again.
What can I do??
Please help
EDIT: The only way I recovered it was flashing with Radio OEM Rom... now it's working again.. How can I flash just the radio? I've hardspl 1.22. All I did is execute spl 1.16 on device, and then run RUU from radio. How have I did wrong? My phone is CID unlocked..
EDIT: I just downgraded hardspl to 1.15 but still stuck on 99%... why cant I flash a Radio ?
Tiago Machado said:
I tried to downgrande my radio using spl 1.16...
it was stucked at 99% and now even after a hard reset it says: "upgrade rom error" please try again.
What can I do??
Please help
EDIT: The only way I recovered it was flashing with Radio OEM Rom... now it's working again.. How can I flash just the radio? I've hardspl 1.22. All I did is execute spl 1.16 on device, and then run RUU from radio. How have I did wrong? My phone is CID unlocked..
EDIT: I just downgraded hardspl to 1.15 but still stuck on 99%... why cant I flash a Radio ?
Click to expand...
Click to collapse
which radio version u r using right now?once u have hardspl 1.22 on ur device u can always change ur radio.if u r using 1.65 series,in that case u will have to flash 1.5 series first to downgrade ur radio,after that u can again flash any radio of ur choice.
regards
To flash compatible radios :
1-downgrade to HardSPL 1.15MFG.
2-Flash radio v1.58.X.X
3-Do security unlock
4-Flash COMPATIBLE radio
Feel free to do a search before further question regarding my reply above.
[SOLVED] Just Flashed the correct official ship rom from HTC site using my HD2 Serial Number... It works like a charm. SPL has downgraded to 1.46
Thanks everyone who helping...
Just Flashing Stock Rom RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe, I got stuck in bootloder.
- Error 294 Invalid Vender ID
- SPL 3.03.0000 can't HSPL-ed with HSPL3, SPL 3.03 is't listed as supported SPL
Flashed RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, still stuck on bootloader.
- Error 294 Invalid Vender ID
- SPL 3.03.0000
- on boot loader screen said: Update fail code error, please try again
Try to get stock rom from HTC official site, but no rom suitable for S/N I entered.
Need help, is there any workaround for it?
Thanks
Edit 1: I Tried this one http://forum.xda-developers.com/showthread.php?t=606713 but also not working...
Edit 2: I visit again this site http://www.htc.com/sea/SupportDownload.aspx?p_id=297&cat=2&dl_id=1063 and put my Serial Number and it has the Official Rom for my S/N (yesterday maybe i put the wrong letter or number), downloading now, let see how it works...
Same thing happening on mine too.. Not able to downgrade stock spl 3.14 to any other lower spl. i tried flashing various shipped roms with spl 1.66, 2.07, 2.10 etc.. no luck.. Does anyone know what to do for this problem???
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
brizzo said:
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
Click to expand...
Click to collapse
hi guys , u need download ur original room ( stock room ) and flash in normal way . after that ur spl is 1.66 or 1.42 depend ur network , after that u ready to upgrade with the rom u want .
Hello to everyone, the problem you mention isn't related to the stock ROM 3.14 but are related to the users who are flashing a non compatible aria ROM.
So my instructions to you are the follow use the stock rom that came from your aria; download the right stock rom from the HTC webpage by using YOUR S/N.
Moved thread to the right section.
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Hi All,
I was facing this same issue for a long time with respect to the 3.03 ROMS.... Yesterday while searching for a solution, I found a website which hosts all types of Shipped ROMS ever published... Just select the ROM belonging to your region from there and Flash it... that will downgrade your SPL to the lower versions... (I personally flashed the 1.48 series ROM for INDIA which is available in that list and now am using WP7 ROM by DFT.... )
Hope this Helps !!!! CHEERS !!!
Please find the URL for India 1.48 series ROM below
P.S. You will find all roms on this website... just do a Ctrl+F for your country on the list of the ROM page.
LINK
brizzo said:
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Click to expand...
Click to collapse
Dont give up man... as long as your HD2 can enter the bootloader its still can be saved...
i am going to try goldcard but i think i have a hardware problem...i'm getting I2C error.
googled it and i'm pretty sure it is going back to the shop. anyway thanks to everyone for your help!