hi there!
As for security reasons at my company i'm not allowed to bring a phone equiped with a camera...
I thought it wouldn't be any problem to just remove the camera from the board of the Prophet, because it's just connected with a ribbon cable, but if i disconnect the camera the prophet doesn't boot up any longer...is there a way to disable the Camera Driver so it doesn't checks the camera while strating up?
Hope for help
Seppel
Related
Hello! I have a 8525 and the camera doesn't load. When I press the camera button it doesn't do nothing. When I press the camera from the touchscreen it doesn't do nothig. If I press the light from the touch also nothing.
What can I do?
Please help me if you can
Camera not working
I also cannot start the camera on my hermes. I would not start on WM5 so thinking it was software problem I upgraded to WM6 but this has not cured it.
Is this likely to be hardware or is there any checks that can be performed to narrow down the problem?
Thanks all
Hello,
I experience a very weird problem with my HD2.
When I want to connect my HD2 to pc then my pc (and other pc's) doesn't recognize my phone, nothing happens. Also my phone isn't giving me the option between "Activesync" "Disk drive" or "Internet sharing". (Altough the option to ask it on connection is turned on under settings). So not an active sync problem I guess. The usb doesn't seems dead because it still charges, on my HD2 the power sign comes up when I connect the usb to pc and the led is on. When I pull it out then the led goes off and the power sign dissapears. But no "data" connection is possible anymore.
Is something broken in my registry? I tried soft resetting several times.
No hard reset yet but I am waiting to do this, maybe someone here knows the answer.
I started experience the problem after I used Tomtom last week ( i used it alot already) . I experienced a problem that my HD2 was stuck in "Carkit mode" thus when someone called me he flipped the screen and putted speaker on. Even when I set it off under settings it. Navipanel was also turned on. I downloaded the hotfix from HTC for Navipanel and now that problem is gone. My phone is again in normal mode when I call or receive calls. BUT the usb data connection doesn't seems to be working anymore .
Someone here knows the magic answer ?
Can you post the Radio version and ROM version you are using?
ROM version : 1.66.405.2 (76641) WWE
Radio version : 2.06.51.07
Have you ever changed the ROM on your device or is all still origional as you got it from the store?
If origional:
1) bring it back for repair, since its not your fault
2) or install HSPL change your radio and rom
I would just send it for repair when that happens. Specially when its in origional state.
I had this problem once but at the moment i connected the phone through a USB Hub
No it is the official upgrade rom from htc site.
Phone is acting weird also.
Everytime someone is calling it puts the speaker on .
Maybe I try a hard reset for this "fkd up" software?
Would this help?
Hmm did a hard reset and the problem persists.
No usb data connection.
Speaker turns to loud when someone is calling me.
Screen flips sometimes.
Guess it is a hardware problem.
Going to turn it in.
Although I completely agree that your unit is probably on the fritz, take into account that the MicroUSB cable can be the problem as well when it comes to connecting to your pc. I bought some Ebay cables and my phone wouldn't connect properly with those. Charging was no problem.
Yes it is on the fritz i guess.
The problems started suddenly and I also tried another usb cable who was also working fine before.
I managed to get connection yesterday just once after pushing it in the phone and moving it a bit. So I guess the usb input is broken or the motherboard. Guess it is the motherboard because of the other weird problems (when want to call someone the screen turns vertically and puts the speaker on), also when i got called. And this after a fresh hard reset.
Hope they will replace the unit without a hassle.
Today I noticed that my phone wasn't recognizing my face ( I usually use Smart Lock trusted face) and I opened the camera app to see what's up. What I found was that the button to change to the front cam was completely gone. I then tried snapchat, which also couldn't open the front cam. I even tried going through the service menu -> service tests -> front camera but once again, nothing happened. No amount of reboots seems to help, so yeah... any suggestions?
possibly a hardware issue/malfunction > try a factory reset after a backup to rule out software problems.
Your phone must be physically broken. Is its charge port looser or tighter than before?
Hi, I have weird problem with my Z5C camera. I really want to replace my broken camera with new one but when I installed it I noticed that it doesn't focus at all. I have unlocked bootloader so I tried to restore my own TA, use universal drmfix zip, fix system with PC Companion and Flashtool, but nothing helped After that I've noticed that when I put my broken camera in, boot phone, start camera app, exit camera app and replace camera (when phone is still on), the new one focus properly! In this case camera app still remains me that device is overheating and focus works only till I didn't reboot phone. After reboot, camera doesn't overheat but it stops focus again. I've spend three days looking for solution and I'm already tired about it, so please help me
After some tests I can add that camera focus is working on CM13 normally but Lineage (which camera is based on stock) still has the same problem.
Hi everyone,
I broke my lcd, so I changed it. I change the lcd+plate, but every componant including power/fingerprint button are untouched.
And after repair, there was a system update, I agreed to install.
And now I don't have the fingerprint option available, nothing in the parameters, nowhere in my phone menu?!?!
I don't know if it is hardware (made a mistake unpluging an pluging back some connectors inside, power button included), or software.
The power button is still working but not the fingerprint, on my honor 20 it's the same bouton, so I doubt it could be a connector not well connected. And I don't whant to teardown everything again, only if I'm sure it could'nt be software related.
the face recognition is working, I never used it before, but now I have to use a faster way to unlock than entering my pin.
Honor 20 YAL-L21 -never rooted or software modified build 10.1.0.241 (C431E9R3P7 (but my bank app (only) tell me I'm rooted (long before that problem) , but I'm not!!)
Is there a know problem?
Thanks