I just got a Mogul today. It's really nice, but I've run into about fifteen brick walls while trying to unlock, flash, and program it so I can use it with Cricket. I used Olipro on it, then I flashed the latest radio to it, and then I flashed Ryan Mogul's ROM to it. I loaded the included Cricket PRL, and then after a lot of frustration I was able to get it to work with QPST. I changed my SPC to 000000, and I changed the carrier name thing to CRKT (should I have done that? It was SPCS before). Then I went and enabled all the GPS settings, and wrote to the phone.
So I thought, now that I have my SPC as 000000, I can get my phone programmed. But of course not; when I dial *228, I always get the "We're sorry" response. I think I missed a step or something. Maybe it was the MDN: When I dialed ##000000, both the MDN and MSID were exactly the same, but I heard that the MDN was supposed to be the phone number. You know, I'm trying to "transfer" my phone number to the new phone. I can't think of anything to do beyond this point. If I dial any other number, by the way, I get some kind of "Welcome to x roaming service" message.
Anyway, I really want to get this thing working before I head off to bed, so fast help would be appreciated. Thanks.
my MDN (phone number) is different from my MSID number. i think Cricket links your phone number to another MSID when you get a new phone, as mine has changed twice!
in QPST, when you set the SPC code to zeros, there is a button to hit to write the code to memory, or save it to flash, or something. i missed that a few times. you enter the one from the log file, then send 000000, then write it. it's not very intuitive. but if you can edit EPST with 000000 then you are fine. i haven't touched anything else in QPST on five phones i have flashed to Cricket
also, you need to point the phone to the right towers with the 1050, or 1013 PRL file, if you haven't. but if it is Cricket on the line with *228 you are good
you don't need to activate the phone, if you don't want to. if the settings in EPST are right you will be OK, as that is all the programming does
I agree with catfishk.
If you can get to ur EPST using all zero's then ur fine. When you call *228 and you do hear the cricket guy then thats good as well.
Try heading over to www.howardforums.com to download a cricket prl. I would recommend 1040 or 1050 and then try to *228 for it to program.
*228 will also program your phone with a new PRL for your market.
I don't know if I could have programmed it manually, but I called Cricket customer support yesterday at 7:15AM and they quickly changed everything for me for $15. Everything went smoothly after that, *228 worked just fine and all that. I don't know if the call and everything wasn't required, but it sure made things easier. My mogul is working now, but I have some now:
I heard that some things, such as MMS, don't work after flashing this phone to Cricket. Are there fixes for whatever is broken?
Also, when I use google maps and I try to look up my GPS location, it shows me as being somewhere only relatively close to where I am and then it says that I should be within 80 meters of that point. I was in a building today trying it out, and it said I was out on the street. Should I just use iGuidance or something?
And finally, is there something special that I need to know for tethering the device? I heard that I can make it act as a WiFI AP, but when I used WMWiFiRouter, it just said it connected to the AP in my house and it didn't show up on my computer's AP list. Is there something else I need to do?
Edit: Oh yeah, also, how much memory should I have free at a time? Currently, I only have 18mb free. I want to have at least Palringo open in the background, and it seems that TouchFlo uses 2mb. I used a program to free up 2mb, so that's really useful, but I didn't imagine so much of the RAM would be used up. I guess that's the way it is.
Also, Opera seems to have some problems. It throws an error when I try to go to a website sometimes, and last time I tried it on EVDO it wouldn't go to any websites when IE would. Anything I should do?
Thanks.
What ROM did you use? The mogul to me really does not have the memory to push T2D or M2D properly with other programs. I would find a clean cricket ROM without the m2d.
Also, to get MMS working you need a program called Arcsoft and manually program the settings for it to work.
As for everything else you just need to research a bit.
I used Ryan Mogul's ROM. Can't I just disable T2D and M2D? I know I disabled T2D, but I dunno where to find M2D to disable it.
Thanks for the MMS info, but the thing is, I don't know what the other things that don't work are. I found out I was stupidly using the Java version of Opera, so I now have the latest WM version and it's amazing. Any answers with the stuff I asked about, such as GPS and tethering?
Momotombo said:
I don't know if I could have programmed it manually, but I called Cricket customer support yesterday at 7:15AM and they quickly changed everything for me for $15. Everything went smoothly after that, *228 worked just fine and all that. I don't know if the call and everything wasn't required, but it sure made things easier. My mogul is working now, but I have some now:
Click to expand...
Click to collapse
that means they never allowed your phone's ESN (Electronic Serial Number) on their network. doh!
Momotombo said:
I heard that some things, such as MMS, don't work after flashing this phone to Cricket. Are there fixes for whatever is broken?
Click to expand...
Click to collapse
malarkey. ALL features work on the Titan with Cricket. i have the same phone you just need to configure it correctly, which is weird with Cricket, but possible...
Momotombo said:
Also, when I use google maps and I try to look up my GPS location, it shows me as being somewhere only relatively close to where I am and then it says that I should be within 80 meters of that point. I was in a building today trying it out, and it said I was out on the street. Should I just use iGuidance or something?
Click to expand...
Click to collapse
it doesn't use true GPS, from what i have heard. it uses AGPS which triangulates from cell towers or something. i dunno but it is never spot on, just approximating
Momotombo said:
And finally, is there something special that I need to know for tethering the device? I heard that I can make it act as a WiFI AP, but when I used WMWiFiRouter, it just said it connected to the AP in my house and it didn't show up on my computer's AP list. Is there something else I need to do?
Click to expand...
Click to collapse
you need to install the right drivers in Windows (i presume that's your computer) and tether it via USB, i think. it pulls data, and acts as a WIFI card from your PC/Laptop, but doesn't act as an AP, i think. i use Linux so i do it differently :/
Momotombo said:
Edit: Oh yeah, also, how much memory should I have free at a time? Currently, I only have 18mb free. I want to have at least Palringo open in the background, and it seems that TouchFlo uses 2mb. I used a program to free up 2mb, so that's really useful, but I didn't imagine so much of the RAM would be used up. I guess that's the way it is.
Click to expand...
Click to collapse
i don't know. use DCD's stuff from his site here. they are light, stable and have a lot of free memory. install the radio ROM, O/S ROM, and Cricket carrier CAB:
http://dcd1182.n715dp.com/index.php
then thank him every chance you get
Momotombo said:
Also, Opera seems to have some problems. It throws an error when I try to go to a website sometimes, and last time I tried it on EVDO it wouldn't go to any websites when IE would. Anything I should do?
Thanks.
Click to expand...
Click to collapse
Opera 9.5 is BETA, and has issues. mine is stable but i use the mobile version, not the Java mini version. also, Cricket is an authentication mess when it comes to EVDO- it works great until you put it down, then it takes a few minutes to get it's s**t together. IE and Opera bail with errors timing out and you just have to keep clicking! it helps to disconnect then reconnect but meh...
Related
So, I searched, but couldn't find anything. If I missed it, please direct me w/ a link.
I recently upgraded my XV6800 to DCD's 2.3.2 ROM and Radio 3.27.00, and now my radio takes 17+ minutes to acquire a cellular signal. This can't be normal. So, once I did get a signal, I dialed *228 option 2, but that didn't fix it. I also re-entered my MSID and MDN from ##778. Nothing seems to be fixing my issue. Any suggestions?
-Randy
Why would you use 2.3.2 and radio 3.27 when you could upgrade to 3.0.4 and radio 3.37.20? Radio 3.27 is a beta radio that was leaked and is very unreliable and buggy. I could see not upgrading to 3.0.4 and 3.37.20 maybe if you didn't care about GPS or RevA, in which case you could use 1.7.0...but 2.3.2 is a GPS rom, so why wouldn't you use the official WM 6.1 3.0.4 rom with the official latest radio?
Yeah dude, get with the program. If you are going to update your rom (i.e. hack your phone) anyway, why not go with the latest.
Go here and follow the instructions closely. You wont look back.
Okay, loaded the Sprint ROM to get the radio, then loaded the VZW version of DCD's 3.0.4.
Looked in Device Info and it shows ROM version: dcd 3.0.4 and Radio version: 3.35.04
Still having the exact same problem. It's taking 15+ minuted to acquire a cellular signal.
And yes, I have plenty of reception here. I have tried it in numerous areas actually, where I know I get full reception.
There's a whole thread devoted to this right here somwhere...
You need to do the following:
phone app, dial *22803 or *22802 (whichever one gets you a signal) and hit phone hang-up when you get a signal and it says it's starting to program. Now that you have a signal do the next step.
phone app, dial ##778
select "EDIT" and enter the 000000 unlock code
select "VIEW INFO" and select "M.IP Settings"
Edit MIP_MODE and change to something else, then go back and change it again back to "Mobile IP Preferred".
Do the smae for MIP reg retried, retry timeout and pre-registration timeout.
Change all the values, ok, then change them again back to the original setting.
Settings are: Mob IP Pref, 2 retries, 1750ms retry timeout, 0 pre-reg timeout.
When you're all done save and exit - soft-resets your phone.
You should be good after this.
Good luck!
rp3319 said:
There's a whole thread devoted to this right here somwhere...
You need to do the following:
phone app, dial *22803 or *22802 (whichever one gets you a signal) and hit phone hang-up when you get a signal and it says it's starting to program. Now that you have a signal do the next step.
phone app, dial ##778
select "EDIT" and enter the 000000 unlock code
select "VIEW INFO" and select "M.IP Settings"
Edit MIP_MODE and change to something else, then go back and change it again back to "Mobile IP Preferred".
Do the smae for MIP reg retried, retry timeout and pre-registration timeout.
Change all the values, ok, then change them again back to the original setting.
Settings are: Mob IP Pref, 2 retries, 1750ms retry timeout, 0 pre-reg timeout.
When you're all done save and exit - soft-resets your phone.
You should be good after this.
Good luck!
Click to expand...
Click to collapse
AWESOME~! Thanks for the help man, nobody else seemed to know.
Any way to thank you on here like you can on ppcgeeks?
wait... didnt work lol
looked like it was working, rebooted, LED started blinking, signal bar was up and EVDO icon was showing, went to sent a text message, and it failed, said there was no signal. rebooted, then back to what it was doing before, signal bar has a "..." under it and it just keeps searching till it acuires a signal 15 minutes later.
holy crap.... it's working now. i have no idea what the hell is goin on. i did a soft reset like 3 times and it's still working, so i'm not worried about it.
thanks again for the help
shapiror06 said:
holy crap.... it's working now. i have no idea what the hell is goin on. i did a soft reset like 3 times and it's still working, so i'm not worried about it.
thanks again for the help
Click to expand...
Click to collapse
Yeah, I've done it about 4-5 times now and the instructions are from memory, so the exact sequence may or may not be exactly correct, but since you've got it working you should be fine.
You may or may not run into this again if you do another ROM update in the future. The Sprint ROM update did NOT mess me up, but some of the following updates for DCD's rom have had this happen. Not all the time though. You should be able to hard reset (I think) w/out this happening and definitely you're good for soft resets.
It's like something in the settings is getting changed, but not such that when you open the EPST settings that they are different... when you go and modify the values and resave them, they get written back to where they need to be.
If you look unter Titan on PPCGeeks I think you'll find a couple threads on this issue. It seems to be a VZW thing I think.
Also - there is a thread somewhere about where you can download the latest PRL to update your phone. I never did that, but probably should.
rp3319 said:
Also - there is a thread somewhere about where you can download the latest PRL to update your phone. I never did that, but probably should.
Click to expand...
Click to collapse
hmmm if you find that thread, let me know! because i think after going through your process to to fix my signal acquisition problem, if I do a *228 opt 2 to update the PRL, it will mess up my signal acuisition again. So if I can manually download the latest PRL, that would be sweet.
OMG this worked for me too! I've been looking for a fix for this for two months. I found a workaround by d/l an old outdated prl from corolada.com but it was a non-nationwide PRL. Did the above fix and I've got a signal again with the latest PRL! Thanks guys!
shapiror06 said:
hmmm if you find that thread, let me know! because i think after going through your process to to fix my signal acquisition problem, if I do a *228 opt 2 to update the PRL, it will mess up my signal acuisition again. So if I can manually download the latest PRL, that would be sweet.
Click to expand...
Click to collapse
Oh, forgot to mention, the PRL's can be downloaded and placed on your storage card from corolada/prl...
i have the same problem, and i have done EXACTLY what this thread sys, yet i still do not get a signal on restart. i have to wait 15 minutes. i have the latest prl also, 51020
whats the deal?
im runnin 3.1.2 and radio 3.39.10
ok...i got calls back,but no data... (so o text or web), do i need to call verizon to get a new akey now? is that it?
-connor
crobs808 said:
ok...i got calls back,but no data... (so o text or web), do i need to call verizon to get a new akey now? is that it?
-connor
Click to expand...
Click to collapse
ok, anyone??? i tried *228 option 1, to get my data back, but it didnt work and when it restarted i had no signal again, so i redid the abov step, sgot my signal back so i can make and receive calls, but still no data, back where i was a minute ago, so how do i get the data back without losing my signal again?? i know if i call the verizon rep he will want me to try *228 and option 1, which will lose my signal, but of course he will say no it wont, so what do i need? just the A Key? or what? how do i call up and just get that without them trying to do all the other steps...cause i have one of the older xv8600 that clears some settings like the akey when you do a hard reset (i know some do that and some dont), so what do i need to fix my data without re-losing my signal?
-thanks
SOLUTION!
ok this worked for me just takes the right combination and order of events.
so if you have no data or calls or a combination of one or the other - go ahead and call verizon, tell them you got cut off right before they rep was going to give you the Authentication key, they will give it to you, restart, this will still show no signal and no data...dont worry. now follow the ##778 steps above, and when you restart you will have both calls and data
-connor
Just in case anyone checks this (I had to after I flash to a stock ROM and back to a DCD ROM and do the MIP settings again), here is the link to manually download PRLs
http://www.corolada.com/prl/
Now, I was going to download an updated PRL manually, but I just did *228 (on Verizon) and it actually gave me a more updated version than is currently on that website, so you might try that before manually updating the PRL
-crobs808
I recently upgraded to DCD3.2.5 ROM and Radio version 3.42.50 And now i cant send or receive MMS messages. I can connect to wifi and i can send regular texts but when i send a picture it only gives me the option to send through email. How do u get MMS back. I installed the verizon carrier cab. Should i install the cricket carrier cab as well?
seems like this may be what you need
http://forum.xda-developers.com/showthread.php?t=404345
Follow A lazy Dude suggestion. You will need to install Arcsoft. I have VZW and that takes care of the issue and gives you threaded SMS/MMS as well.
Thanks they worked. Now i have a problem with the GPS. i installed the new radio version and everything but for somereason no GPS program will pick it up. i tried using google maps and Quick GPS. In order to use the GPS does wifi need to be off? If so then that means i have to use data which will cost me since i have no plan.
Dmarsh508 said:
Thanks they worked. Now i have a problem with the GPS. i installed the new radio version and everything but for somereason no GPS program will pick it up. i tried using google maps and Quick GPS. In order to use the GPS does wifi need to be off? If so then that means i have to use data which will cost me since i have no plan.
Click to expand...
Click to collapse
make sure you have location set to on and not 911 only, its in the phone options from the dialer, under the location settings
thanks but location is on. also what is Rev A and whats the difference between having a 1X symbol on your phone and haveing EV symbol
Dmarsh508 said:
thanks but location is on. also what is Rev A and whats the difference between having a 1X symbol on your phone and haveing EV symbol
Click to expand...
Click to collapse
gc14 said:
1xRTT is strictly voice/SMS
EVDO is strictly data
SMS uses 1xRTT
MMS uses EVDO for multimedia, 1xRTT for message
Click to expand...
Click to collapse
Do this for GPS.... Set the phone to 911 only. Then soft-reset. Then switch it back to Location on... and soft reset. Also, do a *228 , 1 OR *22899 and let the phone re-program / soft reset. Let me know if that helps.
Nope still not working for me
Dmarsh508 said:
Nope still not working for me
Click to expand...
Click to collapse
Have you tried a hard reset? and don't install anything else.
no but i would prefer not too. Ive already done a bunch of hard resets and i finally have my phone where i want it. it would just suck to have to redo it all again.
Also my wifi isnt working. It keeps saying i have the incorrect network key when i know its right. its the same one im using on my laptop and it works fine. maybe i will have to hard reset.
these are my installed programs. Could these be messing anything up?
AIM
Oxios Memory
Quick GPS
Total COmmander
WMminibattery
HTC Home Plugin
HTC home customizer
PHM RegEdit
Pim Backup
and then i also have the verizon carrier cab, Cody ppc performance, GC arcsoft Mobile.
When i start up my phone it always says "the file 'Program' coul not be found or it is not signed with a trusted certificate. Try reinstalling the software." BUt i dont even know what its looking for.
Maybe i should hard reset But is there any of those programs i shouldnt put back onto my phone?
have you tried the Titan GPS fix yet?
check out this post..
http://forum.xda-developers.com/showthread.php?t=406260
would it make a difference that i have radio 3.42.50 with DCD 3.2.5 ROM?
Becasue i noticed you have the GPS fix but you also have a differen radio version than i do.
i just tried that fix and it still doesnt seem to be working. anything i can do? should i reinstall the radio or do anything different?
Im thinking about hard restaring the phone again but when i do that should i change the ROM or radio? Also any reason for the wifi not to be accepting the network key?
i just did a hard reset and only put google maps on to see if it would work and still not working. do i need a different radio? when i go to google maps and click on my location it says your handset does not seem to support the my location feature. Am i doing it wrong? Am i supposed to click on somthing different rather than my location?
Dmarsh508 said:
i just did a hard reset and only put google maps on to see if it would work and still not working. do i need a different radio? when i go to google maps and click on my location it says your handset does not seem to support the my location feature. Am i doing it wrong? Am i supposed to click on somthing different rather than my location?
Click to expand...
Click to collapse
There should be use GPS link on that menu. Click on that and it will start up the GPS and find your position. The default settings for the GPS in Google is to let windows manage it and it should turn it on if all is working.
Ok so now since I no longer have my ipaq 4700.... im loving my mogul.
I do however have the latest srpint rom and dont mind it....
the only question I have is this...
I do not have a dataplan and when I use the internal gps and or messenger....the unit constantly dials out to #777. I called sprint and they disabled HAI or HIA or something like that so they said my internet is disabled...
I just get tired of the constand dial out, failed to connect messages..
which rom would be the best for just getting this to go away....in a tweak somewhere I read that there was a reg key to set to not dial out and I did that... also it said go into manage connections and add a user name. However everytime I do that the name gets removed.
any suggestions?
THanks
Jeff
I don't think any rom would fix that problem, cause the vast majority of users use data plans.
I believe the gps dialout is a reslt of the assisted gps capabilities. I recently disabled this in my wife's sprint touch by altering this key:
HKLM\Software\HTC\SUPL AGPS
I changed both the 'enableAGPS' and 'enableGPSSmartMode' from 1 to 0. I remember which of the two fixed the problem. Probably just the first is necessary. You'll probably need a soft reset.
To get rid of the dialing out completely, you can go to settings\connections\connections\manage existing connections and then delete the sprint. Of course sprint makes it come back, so you'll need to delete the htc_cm_guardian.exe file from your startup items. I am pretty sure that will work. What ends up happening is you get an error when you try and connect to the internet. I'm not sure that's any better than trying to dial out, but at least you know sprint won't screw up your bill (they do a pretty good job of reimbursing for these when they screw up).
guess im batting a 1000....
I already had both keys set to 0
also I do not have that exe in my startup so cant removeit...
oh well...
Try going into your Connections setting and deleting the #777 profile - it shouldnt dial out after that.
Hey everyone i know alot about this phone from your forums. I have done the gps update on my phone using the wiki you had and Worked for some time. So after some time the gps wont pick up any satellites. Ok so i thought well i would hard reset and resintall the carrier cab and gps cab nogo. Ok so i reverted to stock rom and redid to dcd rom and radio added the carrier cab and gps cab again nogo. I even tried the mr1 update with gps cab via your wiki and still google maps and live search wont pick up the gps. Does anyone other than a defective gps unit have any other steps to try would be appreciated. thanks
Did you even search to see if others had your same problem. Look in the last 10 pages here. http://forum.xda-developers.com/showthread.php?t=424387
have you applied the aGPS fix? and if you have, did you update with the new information? im not sure when it happened, but verizon changed the IP address and port you should be using. i lost gps for a while and didnt even realize that a hard reset made me lose all my gpsOne settings (when i lost my akey). if you have the aGPS fix set up correctly, you should have no issues at all.
I've been having a similar problem. I am not sure what the definitive ip address settings for verizon users should be (ip/port, that is). I think I've seen at least 2 or 3 different settings, including Telus ones. Does anyone know, definitively, which ip address and port we should be using?
kflipproductions said:
have you applied the aGPS fix? and if you have, did you update with the new information? im not sure when it happened, but verizon changed the IP address and port you should be using. i lost gps for a while and didnt even realize that a hard reset made me lose all my gpsOne settings (when i lost my akey). if you have the aGPS fix set up correctly, you should have no issues at all.
Click to expand...
Click to collapse
When you mean the ip address change do you mean using qpst and if so i might not have changed the ip address.so i will give that a chance i saw in a previous post a different ip didnt think anything of it. I will try and if someone has the new ip can you please send it to me.
I found
ServerIP=66.174.95.132
ServerPort=8888
Or is it
ServerIP = 216.198.139.92
ServerPort = 8889
And one thing i looked at my phone and when i pull up qpst i dont see the usb ports listed i do see unknown i would try those but if anyone has anything on that would be great thanks
Guess i have to revert back from mr1 to dcd rom hope this works i loved my gps. my omnitech with igo and navigon is ok but i like google maps better.
you should be using DCDs rom anyways. the correct settings are the second block that you listed. your ports may not match the same numbers as the wiki, but add them both and open whichever one has SURF next to it
Use the telus servers. The verizon ones are hit and miss if they work without VZ navigator.
drewcam888 said:
Use the telus servers. The verizon ones are hit and miss if they work without VZ navigator.
Click to expand...
Click to collapse
whats the settings for telus doing rom update right now
68 to 69
Ok so i had the xv6800 and got it working with gps. Then i decided to get the xv6900 because it has more ram and i knew my software i had would work on it. Plus i knew about this hack so....I gave it a shot.
Well I turned on the XV6900 as soon as i had power running to it, and it came from verizon with 6.1 on it. Which saved me some time having to install it later. The first thing i did was install the vahalla cab that i had on my 6800.
the registry settings were automatically set at
Mode 2
PDE address 5C8BC6D8
PDE port to 8889
I then installed the Serf telus agps deal....
Mode 4
server ip 216.198.139.92
server port 8889
then i install Franson gpsgate2.6
and it shows me a lite green icon on my today screen then when you go into settings it says "getting gps data, but no position"
I couldn't get gps to work in google or live. Maybe because i was impatient. I sat here at work on the 8th floor of my building and still couldn't get it to work. So finally I when i was leaving for work, i called my wife to let her know i was on my way home, and when i hung up the phone....there it was. The light green was now dark green which means gps position. And it works now. So i installed tomtom and that works (btw i use gpsgate for this to fool tomtom into thinking that the installed gps is a real tethered gps, because built in wouldn't work). So now gps works great, until I turn on my phone on the 8th floor. So my guess is, the gps has to get a lock outside with clearview of sky while you use your phone. once you do this the agps helps out and then you can go inside and still have location.
Try it let me know if this works for you.
btw- has anyone been getting text msgs saying a free software update available by dialing *228 then 2? this updates the roaming area. I wonder if this is tied in with us hacking the gps. Just a thought.
Telus server info.
http://forum.xda-developers.com/showpost.php?p=3555579&postcount=703
I can't use any app with mobile data, except for dolphin browser. But i can't download anything with them. And in apps like whatsup, google maps, google play store etc. it just says no connection. But when i'm connected to wifi i can use them with no problem. I was looking in the settings but i didn't find anything to fix it. Anybody has some idea?
Thank you.
I had something very similar after flashing a new ROM, Im now on leedroid with no problems so It might be the rom you are using?
unrooted stock rom :/ everything is stock
Try going to settings/phone update/update profile and see if updating your profile helps.
I don't have phone update in the settings :S
Sorry....it should be System Updates
It says that I already have the latest version... but everything worked, I don't know why this happened.
could go into phone programming and reset your data profile
##3282#, edit mode, enter your msl number, data profile, menu, restore.
this code doesn't work for me
I have a dumb question probably, but mobile network is checked in wireless and networks settings right ? And the mobile network settings are right, domestic data and voice should both be checked.
If all that is correct then i would take it to or call sprint and let them fix it. Sounds like an error on their side to me since your phone is stock.
Of course the settings are correct, because I can browse internet. And everything has worked until few days ago.. i don't want to bother with factory reset and that stuff, i'll just wait for ics to come.. if then something won't work then i'll contact htc...
If you go to the phone dialpad, ##3282# doesn't work, then something definately is wrong with your phone.
ycats said:
If you go to the phone dialpad, ##3282# doesn't work, then something definately is wrong with your phone.
Click to expand...
Click to collapse
I dont believe qpst is stock on the 3d. Can't remember tbh. Qpst is required to use ## codes.
Sent from my PG86100 using xda premium
QPST does work on stock. Also, since I work for sprint I would recommend just doing a master reset since this is the first thing they will do when you take it in. Yeah it sucks having to set everything back up, but it will probably fix your issue.
I've just resetted APN's and everything works now!
But I still don't understand why was browsing working, and apps wasn't :S
hrvoje334 said:
I've just resetted APN's and everything works now!
But I still don't understand why was browsing working, and apps wasn't :S
Click to expand...
Click to collapse
I was just about to suggest that the APN's weren't correct, or to reset them, so maybe an apology to the person you told "Of course all the settings are correct" !?!?
Simple fix anyway, glad it's working.
If you ever have a problem like this in the future, chances are it's a phone issue, then a network issue then a rom issue, but ultimately a human issue.
Resetting the phone can always rule out the rom, trying another sim can rule out the rom, calling your network can rule out the network, i get issues like this on a daily basis, it's 9 /10 human error.
Oh an just a heads up, quite a few people tried to help you here and you said thanks not once?