I am trying to flash the "[ROM][WWE][3/27/09][Mystic Series 6.5 21198][GSM] Beta Release, Full TF3D2 & Lite" http://forum.xda-developers.com/showthread.php?t=493780 ROM to my HTC Fuze, I tried to use the Oilex and the CustomRUU programs, but nothing... I get the Connection Error... Everytime. The phone is connected to my laptop running Windows Vista Home Premium x64 via usb.
I don't understand why this is happening, I am reading the instructions step by step...
So I am assuming that you have flashed HARD SPL first or is that the first problem you have?
Check this thread first: http://forum.xda-developers.com/showthread.php?t=410150
You PC must be synced via Active Sync. Make sure you are using ActiveSync v4.5 as well.
Broman400 said:
I am trying to flash the "[ROM][WWE][3/27/09][Mystic Series 6.5 21198][GSM] Beta Release, Full TF3D2 & Lite" http://forum.xda-developers.com/showthread.php?t=493780 ROM to my HTC Fuze, I tried to use the Oilex and the CustomRUU programs, but nothing... I get the Connection Error... Everytime. The phone is connected to my laptop running Windows Vista Home Premium x64 via usb.
I don't understand why this is happening, I am reading the instructions step by step...
Click to expand...
Click to collapse
Which error code you get??
Broman400 said:
I am trying to flash the "[ROM][WWE][3/27/09][Mystic Series 6.5 21198][GSM] Beta Release, Full TF3D2 & Lite" http://forum.xda-developers.com/showthread.php?t=493780 ROM to my HTC Fuze, I tried to use the Oilex and the CustomRUU programs, but nothing... I get the Connection Error... Everytime. The phone is connected to my laptop running Windows Vista Home Premium x64 via usb.
I don't understand why this is happening, I am reading the instructions step by step...
Click to expand...
Click to collapse
Try flashing your phone from a WinXP machine.
Broman400 said:
I am trying to flash the "[ROM][WWE][3/27/09][Mystic Series 6.5 21198][GSM] Beta Release, Full TF3D2 & Lite" http://forum.xda-developers.com/showthread.php?t=493780 ROM to my HTC Fuze, I tried to use the Oilex and the CustomRUU programs, but nothing... I get the Connection Error... Everytime. The phone is connected to my laptop running Windows Vista Home Premium x64 via usb.
I don't understand why this is happening, I am reading the instructions step by step...
Click to expand...
Click to collapse
Allow me to suggest the SD Card flash method...
- Faster
- Safer
- Cleaner
- Trouble free
1. Ensure you have Hard-SPL installed
2. Ensure your SD Card is FAT32 formated
3. Copy the .nbh file to the root of your SD Card
4. Rename it to RAPHIMG.nbh
5. Soft-reset and press Vol. Down Key
6. Follow on-screen instructions
7. After first boot, hard-reset [Soft-reset + Vol. Down Key + Action Key]
The best of luck to you.
Cheers.
SD card can interfere
Broman400 said:
I am trying to flash the "[ROM][WWE][3/27/09][Mystic Series 6.5 21198][GSM] Beta Release, Full TF3D2 & Lite" http://forum.xda-developers.com/showthread.php?t=493780 ROM to my HTC Fuze, I tried to use the Oilex and the CustomRUU programs, but nothing... I get the Connection Error... Everytime. The phone is connected to my laptop running Windows Vista Home Premium x64 via usb.
I don't understand why this is happening, I am reading the instructions step by step...
Click to expand...
Click to collapse
I believe I had the same problem when I flashed the first time. After many hours of beating my head against a wall, I took out the microsd card and the phone flashed perfectly. Give it a try.
The issue is Vista 64, 6.5 has many known issues connecting or staying connected with Vista 64. Try another computer with a diff OS!
I got the WM 6.5 ROM on my Fuze about 2 weeks ago, it worked with Vista x64. No worries
Related
Hi .
I'm planning on upgrading the rom on my MDA Vario II (Dutch).
First I want to unlock the CID. I've got a 1.04 bootloader.
Recently I upgraded to MS Vista (RTM).
When I try to run the patched radio upgrade I always get a ERROR 150.
Yes.. I'm in bootloader mode. It's says IPL-1.01 and HERM300 SPL-1.04.
Could it be Vista??
yes its vista its had something to do with the sync tool in vista they will fix it according to a earlier post next time use the search function there is a thread about Vista and Ruu
I don't think they have released Mobile Device Center for Vista RTM yet... Right now, you see the phone as a drive... Or did you install the beta MDC?
both. I access the phone through the explorer. And I have the beta MDC setup for syncing with outlook etc.
This has been posted a million times, but here we go...upgrading ROMs will not work on Vista until manufactuers update their usb driver code on the installer; until then, use XP/2003. By the way, is that pirated Vista you have?
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
You have to be careful as if the program crashes during the upgrade of the rom you can brick your device, so I will stay with XP or SD card way to flash a rom.
aquasesh said:
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
Click to expand...
Click to collapse
I have Vista RTM and I confirm that the MDC is not stable enough for all these update work... it failed for me a few times and I'm lucky with my 8525 and it is still working OK after reflashing it with another PC (XP).
Aha. That explains that.
I've just managed to get my JasJar stuck in bootloader mode after trying many times to upgrade the ROM. This, despite the upgrade tools telling me there are errors.
Curses.
Apparently people don't know how to read what I posted...
ITS SAFE
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
ISN'T Safe!
phamoui said:
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
Click to expand...
Click to collapse
I am testing vista since CTP (Community Technology Preview), then RC1 (Release Candidate), RC2, now RTM (Ready To Market) as Technet Plus Member.
I can't say is safe to use it even for day by day syncing, I have always unpredictable results; my TyTn sometimes is a Smartphone, sometimes Pocket PC, syncing? may be, every time you connect you have to guess...
This happens because Windows Mobile Device Center (WMDC not included in Vista RTM) is still in BETA 3 stage, not even RC!
LESSON LEARNED
If you plan to install VISTA and you are a WM expert or just business user DON'T upgrade your XP, just install VISTA on a second HD and use your XP to solve the VISTA problems. Even Virtual PC 2007 (good to have with XP installed to have available some appz still not VISTA upgraded) couldn't use USB port, so no way to have a safe "old style" USB connection
Isn't VISTA fault, is a new tecnologies-early adopters problem
One of the most common source of problems with vista are USB drivers (no way in my knowledge to have a simple webcam working with VISTA)
This has great importance when you are doing something "uncommon" and "mission critical" like flashing something!
I would also like the PDAViet 4.0.0.0.6 Touch, but I must be dumb - because I cant get anything to work.
1. Tried with Vista
a. Works up until USB RUU mode - Vista cant see the XDA
b. Got told to forget trying with Vista
2. Tried with Windows XP cannot detect the PDA
a. Used the RNDIS-USB-Kit_05 - no instructions or doesnt work
3. Tried unlocking the SIM - my number appeared as Wingdings
4. Tried unlocking the CID - could not communicate with the XDA
No guides work for me, I am begging for help
have you tried a hard reset? I suppose you have but just asking...
Hi Chavdar,
Yes I tried hard, soft and factory resets.
I also tried many different rom updaters.
Still without any progress.
soldado said:
I would also like the PDAViet 4.0.0.0.6 Touch, but I must be dumb - because I cant get anything to work.
1. Tried with Vista
a. Works up until USB RUU mode - Vista cant see the XDA
b. Got told to forget trying with Vista
2. Tried with Windows XP cannot detect the PDA
a. Used the RNDIS-USB-Kit_05 - no instructions or doesnt work
3. Tried unlocking the SIM - my number appeared as Wingdings
4. Tried unlocking the CID - could not communicate with the XDA
No guides work for me, I am begging for help
Click to expand...
Click to collapse
I am using vista but flashing temp rom is not possible with vista.
I use windows xp with vmware to flash temp rom first, then I upgrade to any wm6 rom.
have you installed activesync 4.5 to windows xp?
as far as I know, it is the only thing you have to install for you prophet to be detected by XP.
gokhanmoral said:
I am using vista but flashing temp rom is not possible with vista.
I use windows xp with vmware to flash temp rom first, then I upgrade to any wm6 rom.
have you installed activesync 4.5 to windows xp?
as far as I know, it is the only thing you have to install for you prophet to be detected by XP.
Click to expand...
Click to collapse
Hi gokhanmoral,
Yes it was Windows XP with Activesync 4.5.
And it is a rebradn : 02 XDA Neo
soldado said:
Hi gokhanmoral,
Yes it was Windows XP with Activesync 4.5.
And it is a rebradn : 02 XDA Neo
Click to expand...
Click to collapse
Can you get any connection with activesync or mobile device center in vista going at all? Heve you ever synced it with a PC at all?
soldado said:
I would also like the PDAViet 4.0.0.0.6 Touch, but I must be dumb - because I cant get anything to work.
1. Tried with Vista
a. Works up until USB RUU mode - Vista cant see the XDA
b. Got told to forget trying with Vista
2. Tried with Windows XP cannot detect the PDA
a. Used the RNDIS-USB-Kit_05 - no instructions or doesnt work
3. Tried unlocking the SIM - my number appeared as Wingdings
4. Tried unlocking the CID - could not communicate with the XDA
No guides work for me, I am begging for help
Click to expand...
Click to collapse
just reset and hold camera button?
Chris1974 said:
Can you get any connection with activesync or mobile device center in vista going at all? Heve you ever synced it with a PC at all?
Click to expand...
Click to collapse
OK Vmware seems to have done the trick.
Upgrade worked on NVID
Then it seems the 4.0.0.6 touch upgrade worked also - 1 error onscreen of XDA - Cannot execute repllog.exe
Finished clean, but stuck on load screen.
IPL 2.1.5.0001
SPL 2.20.000
GSM 02.47.21
OS 4.0.0.0
I followed the instructions exactly :S
soldado said:
OK Vmware seems to have done the trick.
Upgrade worked on NVID
Then it seems the 4.0.0.6 touch upgrade worked also - 1 error onscreen of XDA - Cannot execute repllog.exe
Finished clean, but stuck on load screen.
IPL 2.1.5.0001
SPL 2.20.000
GSM 02.47.21
OS 4.0.0.0
I followed the instructions exactly :S
Click to expand...
Click to collapse
somehow upgrade_rom.bat fails under my vmware, too.
so, after upgrading to nvid under vmware/xp, detach the usb from vmware and upgrade to wm6 under vista.
just make sure you have copied the files to C: and try to keep the directory length small (for example extract to c:\temp)
gokhanmoral said:
somehow upgrade_rom.bat fails under my vmware, too.
so, after upgrading to nvid under vmware/xp, detach the usb from vmware and upgrade to wm6 under vista.
just make sure you have copied the files to C: and try to keep the directory length small (for example extract to c:\temp)
Click to expand...
Click to collapse
VMware to do NVID
Another XP PC to do the install from c:\xda
IT WORKED!
/deepbow
Upgrade in Vista
i've upgraded all my ROMs in Vista Ultimate using VMWare 6.0 with xp pro SP2, Just DONT TOUCH IT when it starts step2 and dont forget to format it after each step (reset with the 3 buttons pressed), BTW i use full screen mode when flushing in VMWare.
gokhanmoral said:
somehow upgrade_rom.bat fails under my vmware, too.
so, after upgrading to nvid under vmware/xp, detach the usb from vmware and upgrade to wm6 under vista.
just make sure you have copied the files to C: and try to keep the directory length small (for example extract to c:\temp)
Click to expand...
Click to collapse
So where do I find the touchflo application?
soldado said:
So where do I find the touchflo application?
Click to expand...
Click to collapse
it's not an application, it's a technology.
it's simply sampling the touches or sweeps on the screen and giving you iphone-like features, like scrolling with your finger.
htc home is an application. 3dcube is an application.
just keep on reading the threads and you'll learn what they are and in which rom they are present or not.
adamsuail said:
i've upgraded all my ROMs in Vista Ultimate using VMWare 6.0 with xp pro SP2, Just DONT TOUCH IT when it starts step2 and dont forget to format it after each step (reset with the 3 buttons pressed), BTW i use full screen mode when flushing in VMWare.
Click to expand...
Click to collapse
Silly question maybe, but where can I find vmware?
rondol1 said:
Silly question maybe, but where can I find vmware?
Click to expand...
Click to collapse
http://www.vmware.com/
a comprehensive information about vmware products and differences: http://en.wikipedia.org/wiki/VMware
I use vmware workstation 6.0 which provides usb 2.0 support. I guess vmware server or player 1.x versions provide only usb 1.1 support but that should be enough and they are free. I am not sure about vmware player 2.x.
gokhanmoral said:
http://www.vmware.com/
a comprehensive information about vmware products and differences: http://en.wikipedia.org/wiki/VMware
I use vmware workstation 6.0 which provides usb 2.0 support. I guess vmware server or player 1.x versions provide only usb 1.1 support but that should be enough and they are free. I am not sure about vmware player 2.x.
Click to expand...
Click to collapse
Thanxx I'll dive in to it!
Hi.
I am a bit embarrassed about writing this, I never thought I would make a brick of my Prophet during “upgrades”...
But here I am, with a phone that don't want to sync with any computer after I accidentally pressed cancel on an active sync dialog box asking for setup with a new device, during upgrade to the latest Touch VIII. Have upgraded several times with several different ROM’s before, but this time things went wrong.
If I choose to start my device normally, it goes trough the HTC screen and stops after the Qtek (HTC in Norway) screen listing the different versions of the hardware…
When I restart to boot loader (Cam button + reset) the 3 colours turn up ok, but when I put an USB cable in the device and the lower, left part of the screen shows USB, active sync will not recognise any new device no matter what I do.
I can still find the Prophet when I go to properties on the computer, but somehow active sync does not care about that.
Are there any way to use a program at the host computer to sync properly with the Prophet?
I would really appreciate any help that could rectify this problem.
Regards, Lars Norway
I believe the " WM6 Upgrade Guide" thread has the info you needed.
panda88 said:
I believe the " WM6 Upgrade Guide" thread has the info you needed.
Click to expand...
Click to collapse
Tried the info there without success...
The guide assumes that you have connection with ActiveSync, but I can not seem to get connection.
So, I really need some advice about how to make a connection to the computer I will make the programming from, when ActiveSync is not working properly.
Have tried to restart both the device and the host computer, have reinstalled ActiveSync, have tried to start the different roms without having a connection to A.S., but no luck...
Have realized my mistake and bought a new Prophet, but would still like to get the old one working again.
it has nothing to do with activesync.
Not sure u really understand the below statement from the thread I mentioned.
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
in case you can't NVID roms, you can still use those step1 roms mentioned by ROM gurus here.
panda88 said:
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
Click to expand...
Click to collapse
Well, the problem is that I am not able to connect...
As far as I understand, the only way to connect is by using ActiveSync?
Regards
connect = the cable between prophet and your pc. after that just run the rom update utility. just dun bother the activesync (does it sound logical to u to establish activesync in bootloader mode?)
OK, I have tried it, but will try on some different computers also.
Posting in a couple of hours.
Thanks for your help so far!
then wish u good luck. happy un-bricking.
OK, same as before.
Depending on which ROM I try, the following messages are the result:
Error [300]: Invalid update tool.
Error [274]: Connection (The update utillity cannot connect to your PDA phone.)
If I try the Touch VIII direct, it stops in Initializing for a while, and then a message appears with the text: Cannot connect to device, Would I like to try again?
Besides, in the welcome screen during the "ROMUpdateUtility_NV_G4.exe" in the Prophet_PV_Temp program, step nr. 2. asks me to ""Establish an ActiceSync connection with your PDA phone."
So, no change from yesterday yet...
are you using windows vistA???
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
hifiasylum said:
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
Click to expand...
Click to collapse
No, on the contrary. The best change you have is XP. Zeroed asked about Vista because it could be the reason of your troubles.
What I should do is just one detail different of what you have already tried:
Put the prophet in bootloader.
DISable "allow USB conection" in the conection-setting panel of ActiveSync
Connect your prophet with the USB cable
Run the NVID RUU again
If that is succesfull, you can upgrade to the WM6 ROM you like.
OK, will do.
Tried Vista just now, same errors and no luck.
Be posting in a minute...
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
hifiasylum said:
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
Click to expand...
Click to collapse
Sorry, I'm out of options...
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Just wondering if your computer detects prophet as a device at all? Does the normal plug device sound comes on when you plug in? Just a long shot, stick in a SD card and try with windows media player to see if it can sync or put files onto SD card. if so, get rom refreshed via SD card...
try few hard resets before you try this.
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
hifiasylum said:
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
Click to expand...
Click to collapse
This sounds dumb, but try restarting your PC, closing all apps running in background (including firewalls), restarting Prophet (with stylus in reset hole). DO NOT TRY TO USE ACTIVE SYNC. Boot into bootloader (Three colours screen), connect USB cable and flash QTEK lastest official, or Jesterz AKU 3.3 (I have found this ROM to have magical powers of unbricking.)
Good luck!
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Hmm this is wierd.I ran into problem earlier this month trying to flash a ROM but got stuck somewhere. So I followed the steps given in the sticky thread. Everything work smoothly. I am using XP SP2 and mine is a G3.
Let's make the assumption that your PDA is not faulty. Maybe you can try the steps again but this time :-
1. Change to another USB cable (or you may test the existing cable by connecting to a working pda)
2. Change to another USB port
3. Make sure you are not running any program that hogs the USB resource
4. If you are using USB hub, please don't connect using it. Make a direct connection to your computer.
that's all I can offer now...hope it helps.
Hi, I have a Sprint Touch Pro. I posted this in this section because I think my problem can be helped from anyone with my problem. I am trying to flash the Hard SPL using Parallels on Windows XP but everytime I try to it says the phone is not connected. I am able to transfer files and load cabs but specifically not flash the hard spl. I am using the correct one for a CDMA phone, and have tried with Parellels, VMware, and bootcamp with still no luck..... Any Suggestions?
You said this was a CDMA raph?
*Thread moved to CDMA forum *
Ta
Dave
Make sure ActiveSync is installed, and also that you have Microsoft .NET 1.1 and 2.0 installed.
just tried that with no luck... it will go all the way to the percentage bar of loading the SPL but than stays at 0 percent and says there is no connection
The issue is with the usb support Parallels has. I've moved onto VMware ( it converted my parallels image perfectly ). VMware is a bit older and has much better hardware support all around.
I've been able to install roms on many phones with this configuration.
how did you get it to work on VMware Fusion... i plug in the phone and it is able to put it into bootloader mode then it just stops
Never worked for me through VMWare Fusion or Parellels. I reboot in bootcamp.
Once it bootloader the PPC identifies as a different USB device, IMHO here stems the problems. Easier for me to reboot than try to solve it
VMware fusion installed with USB disabled within ActiveSync. This has let me install ROMs for a while. With some roms, dcd's latest, I've had to revert to copying the rom onto my sd card for installation that way.
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.