Hello all
Looking for some help.
I flash my rom quite often and have never had any problems. I recently flashed to a 6.5 rom, and all of a sudden the touch screen stopped working. it is unresponsive to any touches.
i flashed the 6.1 official rom, and that flashed ok, but the touch screen still doesn't work
it hasn't been dropped, nothing physically is wrong with the thing, but i'm wondering if anyone has any ideas as to why this could have happened?
i have a NIKI200, T-Mobile Touch Plus, unlocked, hard spl'd etc etc
anyone help?!
thanks!
the flex cables are terrible on these devices, make sure that its not because of the following problem
http://forum.xda-developers.com/showthread.php?t=457284
http://forum.xda-developers.com/showthread.php?t=416747
could be! thanks for that
i have phone insurance, so will probably go through that, i'm not one for opening the phone up!
my question remains, how come all of a sudden this happened after flashing a rom?
can someone please do me a favour and get the registry settings for the Niki
1. Open your Registry Editor
2. Go to HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/TOUCH/
3. Click on CalibrationData
4. Give me the values in this field
This will maybe help me out!
thanks
anyone?! please?
thanks
1766,2044 3007,3100 3044,1015 574,998 575,3085
I don't know if this can help you, anyway these are my values:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1997,2020 3393,3079 3388,969 609,949 614,3080 "
"MaxCalError"=dword:00000010
"DriverName"="TouchResponse.dll"
just wanted to test something
thanks guys!
Related
For the past 6 hours I have been trying to make the No GSM error message on my Cingular 8525 go away. I cannot use the phone to make any calls whatsoever. I originally unlocked the phone to work with T-Mobile which worked for about 2 months and now this error message. The last and only ROM image that I can load to this phone is the Schaps_WM6Pro_WWE_3.60a-0823_Full.exe. Any other ROMs I try to load either does not pass 0% or goes to 12% and freezes. I tried to follow the unlocking steps again but it ROM upgrade part would not pass 0%. So, I loaded the Schaps_WM6Pro_WWE_3.60a-0823_Full.exe again and checked the Device information. In there I do not see any radio version. The other ROM it loads also is Schaps_WM6Pro_WWE_3.54b-0804_Full.exe. NO other ROMS will load. And even if I load the 3.54b or the 3.60a ROM from Schaps and check the Device Information. It only shows the ROM version and the ROM date. Theres no info for Radio version: or Protocol version. What can cause this and also I think that is the reason why my phone is not recognizing the SIM card. I need a way to put a radio version on this phone. Also, I tried 3 different SIM cards and none works. So if someone can point me in the right direction I would really appreciate it. Thank you.
Well, here would be a good place to start... you should try posting your message there.... do some reading...
Intensefactor,
How much reading and research did you do before you attempted to upgrade the ROM on your phone? Can't be that much else you would know that Schaps ROMS don't have a radio built in.
Have you looked at the mrvanx guides and the other info availableon here?
WB
I read as must as possible yesterday and I still cannot flash any ROM with a Radio version in it. Any ROMs that does not include a radio version like the original ones I flashed can be flashed to the phone. Other than that no other ROMs can be flashed to the phone. Or even flash a radio version separately. I even tried following http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=62&Itemid=26. How can I flash a radio version to the phone? Any help would greatly be appreciated. Thank you once again.
Is there anyone that can at least point me in the right direction?
thanx god there's someone facing the same exact problem i do have ,
now XDA guru's can you please help a little bit me and this man ??? coz i've spent the past week reading this forum and the wiki to figure out a solution with out luck , frankly i was shy to ask so i wont be called a noob .
please help me to solve this problem in my hermes , now i have installed "GM360Gold-WWE_Final" and the phone is working but no radio at all and the device halts sometimes .
the main reason of this problem i guess was when i upgraded to this rom "RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_T est.exe"
in this thread http://forum.xda-developers.com/showthread.php?t=328626
plz at least tell me whats the problem to avoid me breaking this device
thank you all
I am in a very similar situation !!! POF or somebody please answer
Guys,
Will these threads help?
http://forum.xda-developers.com/showthread.php?p=1515122
http://forum.xda-developers.com/showthread.php?t=325748
http://forum.xda-developers.com/showthread.php?t=322231
WB
Maybe i'm the unlucky one out of the bunch. Now myphone is stuck on the tri-color screen with HERM100 IPL-1.04 on the top left and HERM100 SPL-2.03 under it. The only way I can get my phone to come on is with the 3 key soft reset. If I hit the power button on the phone all it does is show the green light on the top of the phone. So, I cannot even hit the power button to get the phone on no more. I have to Hold the Power, OK and the Soft reset buttons just to get to the tri-color screen now. If I try to flash any ROMs without a radio, it goes to 1% then the phone reboots and goes to a blank screen again. If anyone have any other ideas. Please reply to this post. Reading and reading hasn't really gotten me anywhere. Maybe some explanation from someone might help now. So, please if someone help give me some advice, I would appreciate it. Thank you.
intensefactor said:
The only way I can get my phone to come on is with the 3 key soft reset. If I hit the power button on the phone all it does is show the green light on the top of the phone.
Click to expand...
Click to collapse
I have exactly the same problem, someone must be able to help us
Can you contact me via MSN messenger at: [email protected]
or if you don't have MSN let me know what you have so we can chat
What exactly were you flashing onto the hermes when the problem of the blank screen and green light began?
Dear User Here,
i'm a new user here and i just ubgrade my x7500 to AP4, really its fantastic rom, many thanks to Athena Project Team, but i have some problem cant fix it,
1- main clock always change from GMT+2 Cairo to GMT+2 Windhoek.
2-i cant found any options for HTC HOME
3- Bluetooth Explorer always go hidden from file explorer
4-always miss all file in MicroDrive
5- i have radio 1.5 its necessary to ubgrade to radio 1.57??????
Please can u help me in this problems
aa_talaat_aa said:
Dear User Here,
i'm a new user here and i just ubgrade my x7500 to AP4, really its fantastic rom, many thanks to Athena Project Team, but i have some problem cant fix it,
1- main clock always change from GMT+2 Cairo to GMT+2 Windhoek.
2-i cant found any options for HTC HOME
3- Bluetooth Explorer always go hidden from file explorer
4-always miss all file in MicroDrive
5- i have radio 1.5 its necessary to ubgrade to radio 1.57??????
Please can u help me in this problems
Click to expand...
Click to collapse
I have moved from that rom a long time now....I would think you should too, but in anycase that is up to you. I would suggest you upgrade your radio though...saves power.
lennie said:
I have moved from that rom a long time now....I would think you should too, but in anycase that is up to you. I would suggest you upgrade your radio though...saves power.
Click to expand...
Click to collapse
many thanks for replay, but really i dont care for any problems right now,
just one big problem i have now...that microdrive always miss my files..
please please if u know any solution for this tell me..just this problem please
aa_talaat_aa said:
many thanks for replay, but really i dont care for any problems right now,
just one big problem i have now...that microdrive always miss my files..
please please if u know any solution for this tell me..just this problem please
Click to expand...
Click to collapse
do a search for a thread on formatting the microdrive
it has a discussion about this problem and how to treat it
Please help
I own a htc Athena x7500, AthenaUnlocker use to unlock the 2nd step and gave me as a valid will restart and stayed black screen. No lights or recognize usb connection.
I tried to do a hard reset but nothing ... just turn on the green and falls neither so the screen remains black and the pda seems dead.
Please help
Thank you very much
please help me aain
Please i need your help,
I have htc advantage x7500, and I unlock it with unlocked tools, i upgrade it to ap4, it was work perfectly....but have one big problem that micro drive always miss data, but I don’t care for that and bought 8g memory card,
but after 2 weeks work in ap4 and suddenly the x7500 hanging and lose all contact and all message, i try soft & hard reset but not useful, am trying to downgrade to original rom but after downgrade the device hanging to and do many restart,
Now I take it to warranty and they told me that I tiring to unlock the SPL and they will try to lock it again but may be I lose the motherboard.
Now I don’t know what can I do. And I need your advice
Please please help me please...
aa_talaat_aa said:
Please i need your help,
I have htc advantage x7500, and I unlock it with unlocked tools, i upgrade it to ap4, it was work perfectly....but have one big problem that micro drive always miss data, but I don’t care for that and bought 8g memory card,
but after 2 weeks work in ap4 and suddenly the x7500 hanging and lose all contact and all message, i try soft & hard reset but not useful, am trying to downgrade to original rom but after downgrade the device hanging to and do many restart,
Now I take it to warranty and they told me that I tiring to unlock the SPL and they will try to lock it again but may be I lose the motherboard.
Now I don’t know what can I do. And I need your advice
Please please help me please...
Click to expand...
Click to collapse
First problem
see this thread found with search function http://forum.xda-developers.com/showthread.php?t=496566&highlight=format+microdrive
Second problem did you do a hard reset after flashing the rom?
HTC always try the broken motherboard line but it is not true.
The problem was you tried to flash an SPL 1.2 rom instead of a SPL 3.5 rom
This is called the endless loop problem
do a search, the answer has been given many times.
Oh and don't post the question 5 times, people get annoyed and wonder why you didn't try the search function
many thx for your replay
lakeman said:
First problem
see this thread found with search function http://forum.xda-developers.com/showthread.php?t=496566&highlight=format+microdrive
Second problem did you do a hard reset after flashing the rom?
HTC always try the broken motherboard line but it is not true.
The problem was you tried to flash an SPL 1.2 rom instead of a SPL 3.5 rom
This is called the endless loop problem
do a search, the answer has been given many times.
Oh and don't post the question 5 times, people get annoyed and wonder why you didn't try the search function
Click to expand...
Click to collapse
Dear Lakeman,
i think that you dont understand me, and this for my bad english, am very sorry for this,
but really i'm in big trouble here, and i thing that i do successfully ubgrade to ap4 because my divice was work perfectly for 1 week, calling, games, songs, video, gps, office....alll.
just i bought memory card 8 gb, and it was work good to, but i try to format it IN W7 in fat32 but i change the "Allocation unit size" to 64 kilobytes and enter it to device and suddenly hanging, i do soft and hard reset, work to the end and after windows mobile work also hanging and touch screen not work.
now i come back to official wm6 and official spl but the problem still on touch screen.
that is all till now my dear.
sorry again for my bad english and many thanks for your help
aa_talaat_aa said:
Dear Lakeman,
i think that you dont understand me, and this for my bad english, am very sorry for this,
but really i'm in big trouble here, and i thing that i do successfully ubgrade to ap4 because my divice was work perfectly for 1 week, calling, games, songs, video, gps, office....alll.
just i bought memory card 8 gb, and it was work good to, but i try to format it IN W7 in fat32 but i change the "Allocation unit size" to 64 kilobytes and enter it to device and suddenly hanging, i do soft and hard reset, work to the end and after windows mobile work also hanging and touch screen not work.
now i come back to official wm6 and official spl but the problem still on touch screen.
that is all till now my dear.
sorry again for my bad english and many thanks for your help
Click to expand...
Click to collapse
OK
sequence of events:
flashed AP4 and everything was working for 1 wk
Microdrive started playing up
Touch Screen started playing up
Flashing different roms did not change this behaviour
These things happened after using a new memory card.
An alternative explanation would be that you have damaged your hardware
Did you drop the phone ?
lakeman said:
OK
sequence of events:
flashed AP4 and everything was working for 1 wk
Microdrive started playing up
Touch Screen started playing up
Flashing different roms did not change this behaviour
These things happened after using a new memory card.
An alternative explanation would be that you have damaged your hardware
Did you drop the phone ?
Click to expand...
Click to collapse
NOOOOOO, never, i didnt drop it....
do u mean that i lost my phone now?? and i cant fix it anymore????
and if i cant fix it with any softwear, can HTC replace it or fix it with unofficial SPL??????
please answer me ASAP, this is my msn
[email protected]
After you upgrade to AP4, which rom you install ? 6.5 or 6.1 rom
Hello all, my HD2 has a broken digitizer. LCD picture is showing up fine but its not sensing my touch. Now i want to restore the original ROM. When i restore the original ROM do i need to hit anything on the screen ? I don't want to be stuck on a screen where i need to hit "OK" to continue and not being able too.
I've never reverted back to a stock ROM before so i don't know the process...
Any info would be great!
no, no screen necessary. the rom will hang on setting up network, waiting for a tap, but by then its stock already so doesn't matter.
great!, thanks it worked... =)
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
hello fellow hero users
a friend of mine has a hero but the calibration seems way off
mos of the times when he touches the screen in the middle and then the notification bar comes down:S
even if he tries multiple times it does it 10 times in a row
i think the screen calibration is off but not sure as i rooted it and put tastyginger on it(as the phone whas still default) but the problem still persist
i did a factory whipe and cache and the dalvik before i flashed it.
will that all make a new touchscreen calibration?
if not how can i make new touch screen calibration?
otherwhise i have to restore it to default and send it in for warranty?
or do you guys/girls think it wont be coverd by warranty
thanks in advance for any tips
not rom related
dutch answer(s) here
iop tha man said:
not rom related
dutch answer(s) here
Click to expand...
Click to collapse
thanks for the reply and the thread
seems like it has to go back to htc
can someone give me a link to the default recovery as yesterday i put amon ra recovery on it:-o and only unroot wont take it away i guess
anyone know how to reset x-y sensitivity?
I've got problem when play falling ball, the man run to the left when I let my phone lies in table ....
This is not a ROM development issue, please post in the Q&A forum, thanks !