hello fellow hero users
a friend of mine has a hero but the calibration seems way off
mos of the times when he touches the screen in the middle and then the notification bar comes down:S
even if he tries multiple times it does it 10 times in a row
i think the screen calibration is off but not sure as i rooted it and put tastyginger on it(as the phone whas still default) but the problem still persist
i did a factory whipe and cache and the dalvik before i flashed it.
will that all make a new touchscreen calibration?
if not how can i make new touch screen calibration?
otherwhise i have to restore it to default and send it in for warranty?
or do you guys/girls think it wont be coverd by warranty
thanks in advance for any tips
not rom related
dutch answer(s) here
iop tha man said:
not rom related
dutch answer(s) here
Click to expand...
Click to collapse
thanks for the reply and the thread
seems like it has to go back to htc
can someone give me a link to the default recovery as yesterday i put amon ra recovery on it:-o and only unroot wont take it away i guess
anyone know how to reset x-y sensitivity?
I've got problem when play falling ball, the man run to the left when I let my phone lies in table ....
This is not a ROM development issue, please post in the Q&A forum, thanks !
Related
Hi Mods and all
I am new in this forum .... and new with PDA in general ,.. although i have experience in regular cell phones ,,,
I have come up with an issue that i need help with from you guys who seem to be experts...
I have an XDA Atom which turns on upto O2 screen and freezez right there .. i tried to hard reset the phone but failed..
When i press power on and reset button .. screen asks me to press green and red key when i do it says clean boot .. and than do u want to reset your phone ? and than after that i tried to press all keys but nothing happens ,,,
I dont know wht is the problem but i think or assume that i have lost bootloader and or Rom ,,, Please help with this part
Also what tools do i use to flash what i have to flash as the PDA cannot connect with the USB becuase it is not turning on ,,, Please help with this part
Also what do i need to flash to this phone to revive it ,,,? please help with this issue ,, and where can ii download this files ,,
please explain step by step and or direct me to a link where i can geet this information
thank u in advance ,,,
Mike
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Drat. Got to this one too late. Sorry
Anyways, the Atom does have the tendency to lose track of its own extended ROM (You can actually see this happening if you use the WM5 hidden storage revealer - which ironically happens to cause the problem sometimes as well).
Symptoms include:
- A phracking long boot time (>7 minutes, seems to hang)
- Screen goes out of alignment
- Camera, Autoconfig, Equalizer don't work.
- Hard reset doesn't help.
- EXTROM info is missing from device settings (shows as blank) - tho sometimes the device works without this anyhoo.
- CMOS version is also missing (the device definitely won't work in this case)
Probable cause:
- Someone or something just tried to write to your hidden storage root. (Eh?)
Far as I know there's no method to recover other than flashing your phone again. Just one of the design flaws of the Atom, I guess...
(Yes, I feel for you. I had to solve this myself too, and I didn't want to send it in. Thankfully, this isn't a common problem. )
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
would you plz tell here which rom u used for this ????????
Well, my Atom Exec will do the same sometimes.
But the following method works everytime!!!
Take out the battery. Charge it with a charger until full !!!!
Put it back to the machine, it works every time !!!
Or you may try just charge it in the machine for a few hours and see if that works. Since I always have a spare battery charged, every time that dumb thing stuck, I just changed the battery and it waked up again.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
Hi mun66;
I've got the same problem with my Atom. But I dont know how to flash the phone like what you mentioned. Could you plz show me step by step??
Thanks,
Your ATOM Exec
edunon said:
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
Click to expand...
Click to collapse
You guys just need to go into bootloader mode before performing an upgrade. For the XDA Atom just press Power+Dpad(center)+stylus reset momentarily, and its now in bootloader mode. RUN again the Update program. If you still experience the same thing, the update file you downloaded might be corrupted. You have to download again and flash your device again.
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
wilak81 said:
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
Click to expand...
Click to collapse
You might want to send it in the the service centre for a check, just in case it's a hardware problem.. If you still face the same issue even without installing any software..
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
wilak81 said:
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
Click to expand...
Click to collapse
Do keep us posted..
I will face the same problem if i install too much programs.. I guess it's either Pocket Plus, Diary 2 which is causing my problem.. Now wondering if i should change to Atom Life, since they announce WM6... If only there's a perfect phone.
Thank God, it's working after 5x flashing but it still had bug.
I still have to take the battery off for at least 15 minutes if I try to reset the Atom.
Sure 1 thing for ATOM, IT SU**S!!!
i have a friend also has a trouble like this ,but he has solved the problem when he charged the exec. do not you have a try ?
I just picked up one of these to play with.
Mine gets by the O2 screen but if I have a few apps on it it loads the Today screen but then freezes and won't let me access anything either by hard key or screen. Soft reset just repeats the cycle.
This is with only around 4 apps loaded. One of them must be a culprit?
By the way, it came shipped with WM6.0 (ROM: WWE_RC2170507B2).
Hello all
Looking for some help.
I flash my rom quite often and have never had any problems. I recently flashed to a 6.5 rom, and all of a sudden the touch screen stopped working. it is unresponsive to any touches.
i flashed the 6.1 official rom, and that flashed ok, but the touch screen still doesn't work
it hasn't been dropped, nothing physically is wrong with the thing, but i'm wondering if anyone has any ideas as to why this could have happened?
i have a NIKI200, T-Mobile Touch Plus, unlocked, hard spl'd etc etc
anyone help?!
thanks!
the flex cables are terrible on these devices, make sure that its not because of the following problem
http://forum.xda-developers.com/showthread.php?t=457284
http://forum.xda-developers.com/showthread.php?t=416747
could be! thanks for that
i have phone insurance, so will probably go through that, i'm not one for opening the phone up!
my question remains, how come all of a sudden this happened after flashing a rom?
can someone please do me a favour and get the registry settings for the Niki
1. Open your Registry Editor
2. Go to HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/TOUCH/
3. Click on CalibrationData
4. Give me the values in this field
This will maybe help me out!
thanks
anyone?! please?
thanks
1766,2044 3007,3100 3044,1015 574,998 575,3085
I don't know if this can help you, anyway these are my values:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1997,2020 3393,3079 3388,969 609,949 614,3080 "
"MaxCalError"=dword:00000010
"DriverName"="TouchResponse.dll"
just wanted to test something
thanks guys!
Hi everyone..
Am having problem with my prophet..
It has problem with screen alignment, so i decided to flash it with new rom
my problem is that i cANT continue flashing the unit because it stops with
screen alignment section after installation of the ROM.. cant get over that part of
installation because the screen isnt aligned yet.
IS THERE ANY ROM THAT SKIPS SCREEN ALIGNMENT?
please help.. thanks.
rizortiz
Helpppp plssss...
somebody with good heart and great mind..
please help me, how can use my prophet
if it has problem with screen alignment..
am stuck with screen alignemnt section after installation/flashing
what will i do?
is there any rom skipping screen alignemnt?
rizortiz
what do you mean misaligned??
like after flashing you cant press the cross thingy very well???
i think the screen alignment section in the boot process is just for formality to test your screen after flashing a new rom...
one more thing...
1. Did you accidentally DROP your device before?? like a hard DROP??
if thats so... maybe its not software issue....
misaligned
marekPLPH said:
what do you mean misaligned??
like after flashing you cant press the cross thingy very well???
i think the screen alignment section in the boot process is just for formality to test your screen after flashing a new rom...
one more thing...
1. Did you accidentally DROP your device before?? like a hard DROP??
if thats so... maybe its not software issue....
Click to expand...
Click to collapse
yes, i cant click that cross thing in the screen very well..
i dont know if my wife had drop the unit accidentally..
if there is any rom skipping screen alignment, so i cud still use my phone..
please help. ty.
there is no screen alignment skipping rom that i known and test so far but hmmm maybe there is someone out here that can help... or better yet you bring this unit to a qualified technician that can check the device coz i think this is not a software problem..
theres nothing wrong if you will just ask...
I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Mine too!!!
Did you use the correct version of CF root??? I accidentally flashed the wrong one because it was right next to the correct one. The exact same thing happened to me!!!!!!!!!!!! I think the touch screen controller is dead. I am going to look at the Log to see what's happening. Does yours also take a while to boot or to load recovery?!!
CryptXus said:
I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Click to expand...
Click to collapse
Hi
I am also in the same boat, any solution for this problem ?
Best regards
Sounds like u fried ur LCD touch. Hope u have insurance.
Sent from my SCH-I535 using xda app-developers app
Odp: Touchscreen not Working after rooting
I suppose wrong version used.
Sent from my washing machine...straight from the tumbler...
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
My working solution
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Sup
lores79 said:
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Click to expand...
Click to collapse
So u must pay to buy a new touch module?
Dewasatya said:
So u must pay to buy a new touch module?
Click to expand...
Click to collapse
Pay yes unless its under warranty and root voids warranty .
OP self inflicted damage nothing to do but pay and learn .
jje
Root your Device
To Reset binary counter when touch is Dead Click here
Now Flash with a Stock Rom
And CLAIM Your Warranty
Hey guys first of all respect to uh all.
Now a big hope that uh guys will solve the issue ! Two days ago i was trying to flash a ROM...so dumb that i was flashing a ROM which was not meant for my device also forget some basics to wipe cache and wipe dalvik cache...after the installation complete device rebooted in a completely white display, i thought it would get start but didnt. Then i pull off the battery from phone thought that with cwm i will restore the backup...but the recovery was gone. I tried several times but even the recovery mode was not working ! Now my phone is able to charge the battery since the led is working and showing red and green light ! You guys are my only hope as i dont wanna go to service center.
Please help. AND IM SORRY IF IM POSTING WRONG THING ON WRONG PLACE.
Micromax A88
Hi,
I am sure your phone will be back with LIFE and working. But the issue is, I need to have the set with me for repairing. You may contact me anytime. If you give me your number, I will contact you and discuss with you on this issue.
Murthy, Vijayawada, AP.
Sourav kumar said:
Hey guys first of all respect to uh all.
Now a big hope that uh guys will solve the issue ! Two days ago i was trying to flash a ROM...so dumb that i was flashing a ROM which was not meant for my device also forget some basics to wipe cache and wipe dalvik cache...after the installation complete device rebooted in a completely white display, i thought it would get start but didnt. Then i pull off the battery from phone thought that with cwm i will restore the backup...but the recovery was gone. I tried several times but even the recovery mode was not working ! Now my phone is able to charge the battery since the led is working and showing red and green light ! You guys are my only hope as i dont wanna go to service center.
Please help. AND IM SORRY IF IM POSTING WRONG THING ON WRONG PLACE.
Click to expand...
Click to collapse
Sourav kumar said:
Hey guys first of all respect to uh all.
Now a big hope that uh guys will solve the issue ! Two days ago i was trying to flash a ROM...so dumb that i was flashing a ROM which was not meant for my device also forget some basics to wipe cache and wipe dalvik cache...after the installation complete device rebooted in a completely white display, i thought it would get start but didnt. Then i pull off the battery from phone thought that with cwm i will restore the backup...but the recovery was gone. I tried several times but even the recovery mode was not working ! Now my phone is able to charge the battery since the led is working and showing red and green light ! You guys are my only hope as i dont wanna go to service center.
Please help. AND IM SORRY IF IM POSTING WRONG THING ON WRONG PLACE.
Click to expand...
Click to collapse
Hey, buddy. Did Your issue get resolved? I am also facing exact problem. I did the same thing. If you can please help.
Sourav kumar said:
Hey guys first of all respect to uh all.
Now a big hope that uh guys will solve the issue ! Two days ago i was trying to flash a ROM...so dumb that i was flashing a ROM which was not meant for my device also forget some basics to wipe cache and wipe dalvik cache...after the installation complete device rebooted in a completely white display, i thought it would get start but didnt. Then i pull off the battery from phone thought that with cwm i will restore the backup...but the recovery was gone. I tried several times but even the recovery mode was not working ! Now my phone is able to charge the battery since the led is working and showing red and green light ! You guys are my only hope as i dont wanna go to service center.
Please help. AND IM SORRY IF IM POSTING WRONG THING ON WRONG PLACE.
Click to expand...
Click to collapse
Flash the entire stock backup using Sp flash tool
my whatsapp no. is 9928130196 please contact me
vsrkmurthy said:
Hi,
I am sure your phone will be back with LIFE and working. But the issue is, I need to have the set with me for repairing. You may contact me anytime. If you give me your number, I will contact you and discuss with you on this issue.
Murthy, Vijayawada, AP.
Click to expand...
Click to collapse
please bro contact me my phone is bricked