Hello mates!
First of all this is a great forum, maybe the best in the world Whatever.. I think I have a big problem. Tonight I flashed SPL 3.65 for X7510 to my X7500. And now I got invalid model id whenever i try to turn back to my original x7500 rom, spl...
I tried the mtty thing and nothing happened. What must i do right now?
And something! If every program checks the model ID when upgrading the flash, how did SPL 3.65 upgrade didn't checked it!
Waiting for the masters' help...
I solved it by Flashing X7510 ROM which is ok to my SPL version. And then i re-flashed SPL Downgrader then it became ATHE400 to ATHE100 SPL 1.20 now I'm back to X7500 world
hmm, i would like to know, why peoples try to flash an x7510 rom to the x7500
I was drunk I didn't really want to flash x7510 to x7500
ggursel said:
Hello mates!
First of all this is a great forum, maybe the best in the world Whatever.. I think I have a big problem. Tonight I flashed SPL 3.65 for X7510 to my X7500. And now I got invalid model id whenever i try to turn back to my original x7500 rom, spl...
I tried the mtty thing and nothing happened. What must i do right now?
And something! If every program checks the model ID when upgrading the flash, how did SPL 3.65 upgrade didn't checked it!
Waiting for the masters' help...
Click to expand...
Click to collapse
this was because SPL 3.65 is only intended for x7510, and so I edited it to only accept ATHE400 roms. anyway I see you fixed the issue and don't drink that much in future
Related
i upgrade the ROM using this :
http://forum.xda-developers.com/showthread.php?t=283965
but I would like to downgrade it again to send for repair ...
i cannot flash it back to the original IMATE JAMIN rom , always stop at 95%.
Please help.
Just wait, suddently it continue.
Regards
"Just wait, suddently it continue."
No, it doesnt. Error msg comes out and forces you to it.
SPL can not be easily downgrade by flashing ROM in a G4.
Same problem
I have same similar problem.
I created new topic. I guess my topic more explanatory.
Lets go on here -> http://forum.xda-developers.com/showthread.php?t=331474
thanks..
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
When you first flashed HardSPL, which verson of the SPL was shown after reboot? That, what you had before, or the new one, of the HardSPL? I am asking, because I managed to keep the original O2 2.15 SPL and I really dont want to channge it (for repair reasons
After flashing the patched HardSPL I see 2.G4.4PDA (I have a G4 XDA Neo)! But the good news are that you now can flash all SPL versions you want, like the original 2.15 when it's inside of your ROM image and you can see it after rebooting!
How to use Hard SPL if a can't pass bootloader?
I tryed hard SPL, but after upgrading it back to 2.20.001., and I can't pass even to "Windows mobile" screen and it is frozen this position.
Any suggestions?
Thanks
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
It's patched SPL 2.20
1. Run SSPL (SoftSPL) - http://forum.xda-developers.com/showthread.php?t=347348
2. Flash HardSPL for your DOC
Yes, really was not hard to patch.. glad it worked))) so, this disables CID and some other checks, so you can flash any custom rom
i have hard SPL/IPL 3.08 will ir work?
newbe here.
What does device root mean?
is it my prophet?
is root windows directory
Looks promissing.
So, as I understand, you don't have to "downgrade" your firmware everytime you want to try a new ROM?
This looks great.
You made our life much easier I think this should be a Sticky
for those of you who dosen't really know what this does.
follow the procedure (soft SPL then hard SPL) and you would never ever need any extra steps before upgrading to wm6.
EDIT: Okay I made it easier. I made a batch file to do the work. (Soft SPL then Hard SPL)
just run the Upgrade_SPL.bat from your PC. It will do the Soft and Hard SPL
Thanks Prislav for this great work
Test to patch a G4 prophet : ok
IPL and SPL version seem differents
IPL : 2.10.00
SPL : 2.G4.4PDA
Test to flash my proper ROM : ok for the moment.
Whaô, WM6 update with progress bar, Fantastic.
Reflexion :
Rom update launched from WindowsMobile synchronised with ActiveSync with patched RUU for Wizard.
My Prophet seems to be reconized by the RUU like a Wizard but upgrade work.
Finally :
Perfect job Prislav it work like a charm, our Prophet are now like other recents HTC devices. It rock : only 10minutes to flash a ROM with special SplashScreen
Now :
Flash just finished, all is ok Prislav, you are the BOSS
Question :
Do a patched RUU for Vista exist ?
Perfect for G4 Prophet...
Wooo! Done!
WOW!
I just tried this, and it's amazing! I tried flashing my Original ROM and it worked. Even the SPL was updated. The only thing that it didn't change was IPL. If you broke your phone and have warranty, this is THE easiest way to get the Vendor ROM back. I would even venture to say this is the best tool yet for Flash-a-holics. Thank you so much!
Sounds great, but what about warranty?
Do we lose it if we change hard spl?
worth to try....
This is really an evolution (or is it revolution? ).
lol this removed my spl 3.08,really amazing tool,thanks prislav,big thanks.
IS HardSPL necessary if CID Unlocked ???
I CID unlocked my G4 M600 with the known paid service.
So do i need to HardSPL my phone and why???
Please somebody explain...
as i think,if you have hardspl,you will never be able to brick your phone.correct me if i was wrong.
Can a G4 be bricked? I was under the impression that the G4 was unbrickable. All the bricks I've ever heard of were G3 devices. I mean one can get stuck at bootloader and the like, but I've always got my phone back. Even had a Wizard ROM on there, and even that didn't brick it (although that time I thought it was toast!)! Like zeroed said, it will help you get your SPL back if you have that problem, and I think it's just an amazing tool for flashing in general.
Panas78 said:
I CID unlocked my G4 M600 with the known paid service.
So do i need to HardSPL my phone and why???
Please somebody explain...
Click to expand...
Click to collapse
Anyone pleaassseee ?????
I just need to be totally shure about this.. If i run this hard spl thingy patch on my G4 prophet i do not need to downgrade to wm5 everytime i want to try a new wm6 rom, if i currently are using a wm6 rom ?
And how do you guys flash a wm6 rom with the RUU utility ? I haven't seen any WM6 rom yet using RUU..
Just a little confused, sorry!
You wont need upgrading to wm5 - i recommend that you never flash full roms to avoid spl reflashing after hard-spl. the best practice will be to use nb2nbf to generate nbfs for your os, splash and gsm separately
Wait a second. Why should we avoid SPL reflashing after HardSPL??? I already flashed back to my original SPL and re-flashed HardSPL without any problem. What is the danger of doing this?
Hello everyone, just a quick help please!
Bootloader is showing:
HERM300
IPL-1.04
HERM300
SPL-2.10.Olipro
Right now I have WM6 installed.
ROM version: 3.54.255.3
Radio version: 1.48.00.10
ExtROM version: 3.54.255.104
I want to downgrade for the selling purposes to:
HER_TMDE_1211113_1050200_GER_SHIP.exe (WM5)
Do I have to do anything else but just execute the exe and let it install? Could I brick it? (again)
Thanks a lot!
Kosta
The same to me!
Please help guys!!!It´s very important because warranty
90 reads, not even a thought from anyone??
Hi there,
i have upgraded several times WM6 and couple of times back to WM5 original, and WM5 cooked, i have not noticed any problem yet, but of course i did always the right thing, as ordered by upgrade....
Cheers,
Zs
Kosta88 said:
90 reads, not even a thought from anyone??
Click to expand...
Click to collapse
Extact your Official Rom and make a new nbh file with all SPL,IPL,PrimarySplash,SecondarySplash,OS,ExtRom,Radio and use the new Hermes RUU flasher choosing "Force Unsafe SPL"
With this way you will also Downgrade the Olipro SPL and the device will be like it was when you bought it. Exactly like Original.
But remember that there is always 0-1% something goes wrong. I have done this procedure 3 times with no problems at all
It doesn't have to be like when I bought it. It is not a must that I downgrade the bootloader...
Just, is the Olipro 2.10 bootloader going to work with WM5?
For selling purposes, the guy only wants it to have WM5 for some older programs (compatibility issues with WM6). Can I just install WM5 over WM6?
I think it can be done . Make the new nbh file I told you and choose Spl 2.10/2.30 (4th option) and flash
My Ameo has started to freeze at the loading screen just after the rom and radio version numbers disappear from the screen. Originally i was using AP5 and decided to downgrade to SPL 1.2 to try some other roms. I followed the procedure and flashed ap3 new and then ran SPL downgrader to try some other roms which seemed to work correctly. Unfortunately when flashing any SPL 1.2 rom the box gets to 100% and reboots as normal but i get the problem mentioned above. I have tried to search the forums for anything related to this and if I have missed anything I apologise. Im now without my beloved Ameo so thanks in advance for any assistance you can provide.
Did you remove your SD card? This will cause problems some times...
Just to add the IPL and SPL numbers on the bootloader
Just to add the IPL and SPL numbers on the bootloader are :
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
photon2 said:
Did you remove your SD card? This will cause problems some times...
Click to expand...
Click to collapse
Yes i have taken the SD card out and get the same problem.
Does no one else have any ideas?
Does no one else have any ideas? times are so hard now im having to use a Samsung E900 do you feel my pain...
Now you're on SPL 1.2, have you reflashed to a 1.2 ROM? AP3New is still 3.5. Boot into bootloader and give it a try.
I have tried all the ones i have found.
Currently i have t-mobile WM6 rom from their website flashed but I have also tried IRUS Vanilla Rom, Sogarth Base Rom 1.2 and well all of them I could find for 1.2 but all freeze at the same point when resetting (albeit with different bootscreens). As you would guess im desperate, I would guess that when downgrading to SPL1.2 its gone wrong somewhere. Does anyone know of a way to update the SPL back to 3.2 from the bootloader as thats the only way i can get a connection to my phone from my pc.
Thanks for your replies so far.
Sorry i meant SPL3.5