hi
SORRY if this is a wast of thread but i need help very badly
MY PROBLEM IS SOLVED CHEK THE LAST POST FOR DETAILS THANKS
i tried to update my ROM with helgees ROM through SD card it did not happen so i used stylus and restarted the phone now its dead not coming on
NEED help any suggestions pls
Note : i said this many time and im repeating when such thread are opened pls re visit the same and do report when the problem solved this would help others who would latter on come to the same thread and try to help u if they know the problem is solved then u have saved their time and energy and they could use the same for some more Usefull purposed (that why i revisited and posted that my problem is solved )
pls do help guys
hi
can some one give me some ideas
and i got all my contacts on PIM now how do i get the same i need these contacts i have not synked with the PC i only have PIM backup
haree said:
hi
SORRY if this is a wast of thread but i need help very badly
i tried to update my ROM with helgees ROM through SD card it did not happen so i used stylus and restarted the phone now its dead not coming on
NEED help any suggestions pls
i have all my phone numbers on the PIM how do i get the phone numbers
how do i get my phone working
Click to expand...
Click to collapse
Connect your Phone to PC, press and hold camera then power, it will go to bootloader (three color), if it's not work, press and hold camera then reset, it also will go to bootloader, then flash your phone with other ROM by PC.
BesFen said:
Connect your Phone to PC, press and hold camera then power, it will go to bootloader (three color), if it's not work, press and hold camera then reset, it also will go to bootloader, then flash your phone with other ROM by PC.
Click to expand...
Click to collapse
Do the same that Besfen told you , and atleast, once remove the battery and then press the key combination(Camera + powerbutton) and then put the battery again,then try what Besfen is saying
(I am assuming that your phone is not off because of the drained battery)
Gud luck
its just dead pls help
hi
my phone is not comming on i am getting only the green and red color if i stik the stylus in the reset button thats all i did try wat u said nope its not happening
can u at least give me an idea if i can view the PIM bakup i got like 600nos and i need them
BesFen said:
Connect your Phone to PC, press and hold camera then power, it will go to bootloader (three color), if it's not work, press and hold camera then reset, it also will go to bootloader, then flash your phone with other ROM by PC.
Click to expand...
Click to collapse
battery i have
hi
batt i have more than 70% i tried to flash bu SD it was stuk in the screen long time so i used stylus and re set phone now i got this black screen
at least give me an idea to get the PIM backup at least on my comp
i need the pone numbers i dont have active synk backup
rakesh_4utoo said:
Do the same that Besfen told you , and atleast, once remove the battery and then press the key combination(Camera + powerbutton) and then put the battery again,then try what Besfen is saying
(I am assuming that your phone is not off because of the drained battery)
Gud luck
Click to expand...
Click to collapse
i think the problem is solved
hi
thanks besfen and Rakesh got the tricolor really dont know how and now im flashing a new ROM
thanks guys its rite now uploading
that removing the batt u said i think did the trik thanks guys a million my phone is up and running
haree said:
hi
my phone is not comming on i am getting only the green and red color if i stik the stylus in the reset button thats all i did try wat u said nope its not happening
can u at least give me an idea if i can view the PIM bakup i got like 600nos and i need them
Click to expand...
Click to collapse
You can see contact in pimbackup only if you restore it.
remove the battery, then press the power for 10 - 20 seconds to remove residual power, then insert battery, connect your phone to pc, press and hold camera button, don't release it and reset, release reset first but don't release camera, you can release it if your phone in bootloader (Three color)
haree said:
hi
thanks besfen and Rakesh got the tricolor really dont know how and now im flashing a new ROM
thanks guys its rite now uploading
Click to expand...
Click to collapse
That is really a good news,when you said that your gene is dead literally u won't believe i felt that the problem is mine and i lost my gene.
I think after joining this forum we all became good friends.
haree said:
hi
thanks besfen and Rakesh got the tricolor really dont know how and now im flashing a new ROM
thanks guys its rite now uploading
that removing the batt u said i think did the trik thanks guys a million my phone is up and running
Click to expand...
Click to collapse
please confirm when done.OK hari I think u must change your name back to SVRhari,that was more lucky for you. lol
haree said:
hi
thanks besfen and Rakesh got the tricolor really dont know how and now im flashing a new ROM
thanks guys its rite now uploading
that removing the batt u said i think did the trik thanks guys a million my phone is up and running
Click to expand...
Click to collapse
Nice to hear that.
As I said in my thread post 1
WARNING:
ROM Updating is NOT without risks.
Ha...ha...ha...ha....
My problem solved
hi
thanks Rakesh and besfen
with the help of u too very nice guys i have been able to get my phone bak
i did exactly wat u had suggested and now i have flashed a rew rom and ok
Thanks a million guys ur great most obliged for ur help
Ok lastly because i am also a patient of flashomnia ,which rom u just flashed in your gene.
@[email protected]
hi
its done im ok now my phone is alive thanks again a million to u nice guys
i have flashed Sumits pro and my phone very much alive
rakesh_4utoo said:
please confirm when done.OK hari I think u must change your name back to SVRhari,that was more lucky for you. lol
Click to expand...
Click to collapse
i did SD flash helgees
hi
i flashed helgees 21210 by SD card i dont think i want do any more SD flashing man
rakesh_4utoo said:
Ok lastly because i am also a patient of flashomnia ,which rom u just flashed in your gene.
Click to expand...
Click to collapse
haree said:
hi
SORRY if this is a wast of thread but i need help very badly
MY PROBLEM IS SOLVED CHEK THE LAST POST FOR DETAILS THANKS
Click to expand...
Click to collapse
i m late here
there is no point to say wasting of thread
i know how ppl fee when they get blank screen when they prees powerbutton
happy ROM flashing :B
@hari
It's Ok yaar.
Tonight i was planning to flash helgee's new rom,but now no more SD card flashing for few days.
Right now i am using besFen's m2d rom.
quite happy with it ,no pros till now. but some features are missing
(Not a complaint)as BEsFen already stated that it's a clean rom.
For a moment I though haree is gone ha ha!
Yupe the problem in sd flashing is that if we flash the wrong rom, then there is chances of getting brick. what do u guys say.?
great to see haree is with us
tel u one thing
hi
Thanks
i realy S Briks yesterday and its gona take me along time to try SD flashing again but i did flash the rite ROM may be got a little impatient with the Flashing i think
if u Flash wrong ROM even with ROM utty u are in trouble no juts SD card
Now i need to save all my phone contacts on my comp im not sure if we can do active synk can any one pls give me a SW or idea to save all my contact at any other place so if i get into the same problem again at least my numbers are safe
or is their a SW to read the pim backup on the comp
premolikeshtc said:
For a moment I though haree is gone ha ha!
Yupe the problem in sd flashing is that if we flash the wrong rom, then there is chances of getting brick. what do u guys say.?
great to see haree is with us
Click to expand...
Click to collapse
active sync
haree said:
hi
Now i need to save all my phone contacts on my comp im not sure if we can do active synk can any one pls give me a SW or idea to save all my contact at any other place so if i get into the same problem again at least my numbers are safe
or is their a SW to read the pim backup on the comp
Click to expand...
Click to collapse
hey hari...
use active sync man so that you contacts will be saved in MS outlook....if you need a copy of your contacts it will always be there in outlook..simplest way as far as i know...
also once you contacts are saved in outlook you can export them into a excel file and save it safe some where....
Related
Hi,I have a problem,when I have installed WWm6 on my TC500( prophet)with fantastic mobitz2.04b I have a problem with contact.This command don't work,I can't found the people on my contact sim and I can't found with touch cube same.Does some one know what the problem is?
Thanks
n.racing said:
Hi,I have a problem,when I have installed WWm6 on my TC500( prophet)with fantastic mobitz2.04b I have a problem with contact.This command don't work,I can't found the people on my contact sim and I can't found with touch cube same.Does some one know what the problem is?
Thanks
Click to expand...
Click to collapse
Hi did you make a hard reset first after upgrade the new software?
You need to do that.
Kind regards
LG
Ohhhhhhhhhh
Ohh,I did hard reset(camera+coman+reset) only late the install new WM6.Sure that I have to do untill???Is it so important??Is there a way to resolve??
Thanks
Ema
n.racing said:
Ohh,I did hard reset(camera+coman+reset) only late the install new WM6.Sure that I have to do untill???Is it so important??Is there a way to resolve??
Thanks
Ema
Click to expand...
Click to collapse
Try to make a reset pushing Camera+comm+reset, than just left the reset buttom and wait 2 seconds, after it displays an information to push the green buttom, and only with this steps you have the hard reset done. this steps you can do after downloading wm6. Don't worry be happy.
Regards
Lg
Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X
i rlly need help so if there's any ideas
& btw i tried pressing the camera & power 2 log in the bot screen but i even cant do this ?
My Mistake....
u shdunt hav downgraded ur windows..i read smwhere downgrading rom can even make ur phone dead n in ur case i think is same..
so any1 knows how 2 fix it??????????????? i rlly need help
You can enter in bootloader? 3 color screen?
If not try the following:
Remove the battery from gene. Press the power button some times to discharge the residual energy. Now put back the battery and power on your device. The leds should blinks. Now hold the camera button and reset your Gene. This way I believe it will be in bootloader mode and you can flash another ROM.
saaaaaaaaaaaaaaaaaaaaaaaaaad
nothng happn just power lights in buttons on mine plzz help plz
try this
hi
try what ramersonw has mentioned in this post if u get the try color screen used usb cable and flash ROM also give more details how can people help u without any info
wakkasx said:
nothng happn just power lights in buttons on mine plzz help plz
Click to expand...
Click to collapse
OMG
I installed a rom to HTC P3400 now it give no respond for anything
surely i can help you....
call me @
sumeet922 said:
surely i can help you....
call me @ 9226491934
Click to expand...
Click to collapse
stop giving your private numbers,email ids publically.better is you PM the respective person.
If you have so much knowledge(no offense), better is you start a new thread and spread the info.
this would help all us gene members.
karan999 said:
stop giving your private numbers,email ids publically.better is you PM the respective person.
If you have so much knowledge(no offense), better is you start a new thread and spread the info.
this would help all us gene members.
Click to expand...
Click to collapse
my english is poor......
1st try J-TAG METHOD
IF TRI-COLOUR SCREEN COMES, UPLOAD 614 kb's NBH FILE ON CELL VIA ROM UPDATE UTILITY
THEN FLASH ANY COOKED ROM.
tested 100%
hey All i need some direction please ...all help will be appreciated as that file i mentioned the weather report function if used Resets my phone
@Damin777
Can you elobrate a bit on the problem you are facing or the query you have.
Its bit unclear what you exactly need, from the above post.
Duron23 said:
@Damin777
Can you elobrate a bit on the problem you are facing or the query you have.
Its bit unclear what you exactly need, from the above post.
Click to expand...
Click to collapse
+1 for that
hey guys .. yes i can ex-plane ... every time i try use the home weather report tab and i choose to receive data the phone resets ..like a soft reset ..not very pleasant as i like my weather
@ Damin777
Which is the ROM you are using ?
SumitsProUsers6.1_v2.5final_OldGene....if im not mistaken that's my currant Rom
im not sure but try here
hi
im not sure but i did see some apps for weather for 6.5 in the development and hacking section i dont have the exact link as i dont need this function but do search in the above mention section im sure u would get a solution to ur problem
see below link u have all 6.5 stuff here in sure u would get what u want good luck
http://forum.xda-developers.com/showthread.php?t=512121
Damin777 said:
SumitsProUsers6.1_v2.5final_OldGene....if im not mistaken that's my currant Rom
Click to expand...
Click to collapse
Dear All,
My HTC P3400i is dead, show 3 color screen and can't open it.
On that screen is show the text to;
ONBL 1.17.0000
SPL 1.07.Oref
(on red color)
So please give me for your idea to recover rom or uprom ASAP.
Thank you very much for your kind cooperation in this matter.
[email protected]@b said:
Dear All,
My HTC P3400i is dead, show 3 color screen and can't open it.
On that screen is show the text to;
ONBL 1.17.0000
SPL 1.07.Oref
(on red color)
So please give me for your idea to recover rom or uprom ASAP.
Thank you very much for your kind cooperation in this matter.
Click to expand...
Click to collapse
Read the Rom upgrading guide forum carefully.See my signature.the links are given.
3 colours
Yes its in Bootloader mode, Now you can flash ROM
I can't flash rom now, the program was show the error message
"ERROR 300"
i have same set, same condition
Please some one help us...
Thanks in advance..
Arif Jamil
hi
guys if u can see the tricolor
1.connect ur phone to ur pc using ur usb cable
2.see if u get the USB text
if so good just use the customer ruu and flash a rom
i used to have a gene i did this once when i got this problem it worked for me
hope it helps
goodluck
[email protected]@b said:
I can't flash rom now, the program was show the error message
"ERROR 300"
Click to expand...
Click to collapse
Arif Jamil said:
Please some one help us...
Thanks in advance..
Arif Jamil
Click to expand...
Click to collapse
@karan999
hi
this is not a nice answer ur being very bullish remember all the questions u asked to many here and they answered right its like that u give what u take
nothing wrong in helping this is just my advise thats all
i did not expect this frum u buddy i feel very very sad
karan999 said:
Read the Rom upgrading guide forum carefully.See my signature.the links are given.
Click to expand...
Click to collapse
haree said:
hi
this is not a nice answer ur being very bullish remember all the questions u asked to many here and they answered right its like that u give what u take
nothing wrong in helping this is just my advise thats all
i did not expect this frum u buddy i feel very very sad
Click to expand...
Click to collapse
im really sorry....bt din understand a word.
follow dis steps if u r getting error 300
1.get ur bootloader mode (tricolor screen)
2.connect ur device to pc u wil see usb below
3.kill active sync process named wcescommm through task manager
4.run rom update utility
it should work if u hv new gene!! all the best
r u sure that yours is new gene and u have done the oref after knowing that?what happen when u just soft reset or power on the device?only red and green light blink?if yes then u have definately brick your device.if no then try rom for both old and new gene for flash.may be this will help.
hi
dont give the wrong idea one should find out if their mobile is old or new and them flash the right ROM for their phone u cant ask him to flash both old and new gene ROM and try
this is not a trial and error pls if u dont have the solution its fine kindly don't give the wrong idea this is just my sugestion to u that's all
saurabh88 said:
r u sure that yours is new gene and u have done the oref after knowing that?what happen when u just soft reset or power on the device?only red and green light blink?if yes then u have definately brick your device.if no then try rom for both old and new gene for flash.may be this will help.
Click to expand...
Click to collapse
i just tried updating my OB nova v8 to nova v11 by aprold and then boom!! im stuck on a lg picture ....
please help ,,what must i do guys ..please help
quick fix------reinstall the rom and this time wipe every thing and but every thing I mean every thing!!!!!Ohhh did u root ur device and did u flash clockwork recovery mod. If yes then it's very easy if no the lg repair guys are ur only hope.
Hit the Thanks button if I have helped!!!
vipaman said:
quick fix------reinstall the rom and this time wipe every thing and but every thing I mean every thing!!!!!Ohhh did u root ur device and did u flash clockwork recovery mod. If yes then it's very easy if no the lg repair guys are ur only hope.
Hit the Thanks button if I have helped!!!
Click to expand...
Click to collapse
..ive rooted already,ive flashed it already...the problem is the lg starting picture is just blinking and doesnt wan to go on CWM .....
Remove the battery for 5 mins and then try again.
im doing it bro...
bro its not working either ,,,when the time that this problem appeared and when i restart it it will go into the CWM but now it doesnt ,,its just blinking and sticking with the picture ...what must i do bro..please help me beacause im not used to this kinds of risky problems,, i think im hopeless ...please help me bro
vipaman said:
Remove the battery for 5 mins and then try again.
Click to expand...
Click to collapse
bro its not working either ,,,when the time that this problem appeared and when i restart it it will go into the CWM but now it doesnt ,,its just blinking and sticking with the picture ...what must i do bro..please help me beacause im not used to this kinds of risky problems,, i think im hopeless ...please help me bro
Ummmmm......the lg repair guys with have to fix it now. I would sugest to keep trying and let the device be on like that for 5 mins. this same thing happened on my g2x when i put ics but after i removed the battery and left it alone for 5 mins it started to work again.
THANK YOU BRO..ill just wait ...thannk you so much bro
Anytime bro!!!!