Hello! sorry for my bad english, im spanish... can anyone help me? I have a original spanish rom from HP for my rw6815, but this rom is for flashing via PC and have the extension *.nbf, can anyone tell me how i can convert this rom with the extension *.nbf to diskimg.nb0 to flashing via SD?
Thanks for all.
Check this : http://pda2u.ru/index.php?option=com_docman&task=doc_download&gid=11&&Itemid=3
from PDA2U
Thanks
Thanks for all Nhocbanme!
i am convert the rom *.nbf to diskimg.nb0 and y flash it from my sd... the white screen and Hp logo appears... and more later the black screen with "Device clean boot... Reset to factory default!!" and never more happens... the black screen freeze and the flashing never finish... i reset the pda and the boot screen of hp appears but the pda not start.
anyone tell me how can i install the official HP 1.10 spanish rom?
If U wanna flash ROM via your SD, U must cut 12 first bytes (size : 64,000 KB)
12 first bytes is used to flash by Device Software Update Utility... if U didnt cut it, U only flash it via PC
nhocbanme said:
If U wanna flash ROM via your SD, U must cut 12 first bytes (size : 64,000 KB)
12 first bytes is used to flash by Device Software Update Utility... if U didnt cut it, U only flash it via PC
Click to expand...
Click to collapse
Right, but if you dump and repacked it, make sure if you all rgu and dsm file which you needed available, my experience, i dump nbf file from HP original update, all of rgu file are missing. its will make you device will not boot corectly.
use bepe+ervius tools to change your ROM language
thanks
thanks for all, but how i can cut the bytes nhocbanme?
ariey... i don´t like change the language of the rom... i like install the spanish rom i have. but this rom has nbf extension an i need to flash it from sd... how can i made this?
can you make a rom flashable from Sd with the rom that i have for me? i send you the rom or i put it on internet, at your desire...
excuse my awkwardness and my bad english.
help!!!
can anyone help me??
Redhawk81 said:
thanks for all, but how i can cut the bytes nhocbanme?
ariey... i don´t like change the language of the rom... i like install the spanish rom i have. but this rom has nbf extension an i need to flash it from sd... how can i made this?
can you make a rom flashable from Sd with the rom that i have for me? i send you the rom or i put it on internet, at your desire...
excuse my awkwardness and my bad english.
Click to expand...
Click to collapse
You can use hex editor, cut 12 bytes header, and cut the tail so it exacly 64.000.000
help
well, but, what is the header and what is the tail?
please, help me...
Redhawk81 said:
well, but, what is the header and what is the tail?
please, help me...
Click to expand...
Click to collapse
If you have any .nb0 file, open it with hex editor, compare it with .nbf file in hex editor, you will find that in nbf file have header, delete 12 bytes header so it have same front character like nb0 file, then the tail/end of it delete so the when you save it the size exactly 64.000.000
help please
i am cut the header and tail, create the diskimg.nb0 file, but not work... this is the *.nbf file that i like to convert into diskimg.nb0 http://www.mediafire.com/?sharekey=64a9c4742713c3d27432d3c9683f450ae04e75f6e8ebb871
can anyone convert it for me? pleeeeeeasseeee help meeeee!
is for an iPAQ rw6815
thanks!
help me please...
help me please! i need to return to wm5...
Redhawk81 said:
i am cut the header and tail, create the diskimg.nb0 file, but not work... this is the *.nbf file that i like to convert into diskimg.nb0 http://www.mediafire.com/?sharekey=64a9c4742713c3d27432d3c9683f450ae04e75f6e8ebb871
can anyone convert it for me? pleeeeeeasseeee help meeeee!
is for an iPAQ rw6815
thanks!
Click to expand...
Click to collapse
Here is your request :
Version 1.10.04 [Spanish] (The link you gave me) : http://www.mediafire.com/?vjfzmlwg2m0
Version 1.12.00 [Spanish] (The link from HP site) : http://www.mediafire.com/?jdzhzujtylw
Goodluck
Thanks but not work
thank you very much nhocbanme... but... i am install the two images but dont work... the install start (white screen with hp logo) this screen desappears and appears a black screen (reset to default, etc...) and in this screen freezes the installation... no more happens...
what happen?
help me please...
and another question nhocbanme... in your roms run tomtom7? i cant run it in your roms...
Redhawk81 said:
thank you very much nhocbanme... but... i am install the two images but dont work... the install start (white screen with hp logo) this screen desappears and appears a black screen (reset to default, etc...) and in this screen freezes the installation... no more happens...
what happen?
help me please...
and another question nhocbanme... in your roms run tomtom7? i cant run it in your roms...
Click to expand...
Click to collapse
Have you ever successful with installation via SD card ?
Please give me tomtom7, i'll test it
help
no nhocbanme, the roms that you send me not work, the installation via SD freeze at black screen of clean room boot. not work the roms. what happens?
i sed you a private message with a link to a web to download tomtom7
help me
i can't return to spanish wm5... can anybody help me?
nhocbanme... are you test tomtom 7 in your roms?
Could someone help me with the Dutch WM5 version?
This ROM
I tried everything but no success... i also tried the WWE version but also no success. I compared the WWE version i made with an WWE nb0 file already exists on the net but mine is totally different.
Related
Just a little info -I discovered at the weekend. I have been playing with the wm5 1.60a for a while and in orfder to save space in the storage i have installed a lot of programs on the extended_rom partition. I renamed this via the registry. Don't do this !as it really screws things up. You end up with two extended rom plabels in explorer and you can not rename them back. I have had to reinstall wm5 1.60a
I dont see any problem installing program in Extended ROM. All you have to make sure is you have to rename the Extended ROM BEFORE you install anything.
If you rename it AFTER then surely you are going to be screwed. Because the program installed in the extended ROM is registered in the registry as whatever name the extended ROM when the program are installed.
Can you please be more specific with your problem. If not I think your post is "misleading".
True
In summary you are correct. I should have renamed Extended_rom before installing programs to it.
However when you reset the machine the operating system creates a new folder called extended rom and puts the renamed extended rom data and programs in it.
The original renamed folder with the memory chip icon is also present in the directory view so the data appears twice.
odd to say the least
I dont have the problem that you described.
When I install WM5 v 1.60a. I immediately rename it to "STORAGE" then install program in it. I have been using version 1.60 for more than a week now and I have countless Soft Reset even Hard Reset(Persistent memory right?) and no double folder and anything.
Just follow my advice and rename it at the beginning. I am sure you wont have the problem.
Hi,
This has most likely been covered but can someone tell me how do I rename storage areas. I have WM2005 1.60a Rom Thanks to Buzz.... and I as defalt run out of storage memory really quick and my program memory is massive, I am really sorry if this has been cover so even if you could point me to where it is discussed.
Thanks Heaps.
where can i download wm 2005
where can i get the latest wm 2005 rom?
found a link but the files is corrupted?
can anyone of you help me to have this latest rom.
seal said:
Hi,
This has most likely been covered but can someone tell me how do I rename storage areas. I have WM2005 1.60a Rom Thanks to Buzz.... and I as defalt run out of storage memory really quick and my program memory is massive, I am really sorry if this has been cover so even if you could point me to where it is discussed.
hi Schen i try to rename the ext_ROM but it say can not rename it tell me what should i do pls
Click to expand...
Click to collapse
Re: where can i download wm 2005
arquizon said:
where can i get the latest wm 2005 rom?
found a link but the files is corrupted?
can anyone of you help me to have this latest rom.
Click to expand...
Click to collapse
U can get it at buzzdev.net
Goodluck....n rgds
Leslie Lee
I tried download 1.6a at buzzdev.net but is" index" only ,can u help
HI, SCHEN
Can u help me how to change the ext_rom to storage step by step?
I am new user , I don't even know where can i find the ext_rom to rename and someone told that i can't rename the ext_rom.
ymchow said:
Leslie Lee
I tried download 1.6a at buzzdev.net but is" index" only ,can u help
Click to expand...
Click to collapse
u go to site http://buzzdev.net
U need to register. registration is free.
u can then download.
there r 5 versions of wm2k5 for himalayas there
regards n best wishes
Thank! Leslie Lee I had download successfully
Uppdate: it's not as simple as it's seames
here is some notes from xvx45
Code:
Quick help for file editing :
iniflashfiles.dat
It will create the different directories and copy shorcuts to menu.
You can open it with notepad.
When finish to edit it, save as unicode file.
Open an hexadecimal editor like WinHex and remove first offset (FF FE) and save your file.
hv files
In the first time you'll need to convert in editable ressources with rgucomp.exe.
It will transform hv files in rgu files. rgu files are editable in notepad.
The first step to do is to add at the first line "REGEDIT4" (without " ")
Save everytime in UNICODE format.
And be sure there is a blank line at the end of the file.
Once the file is edited use rgucomp.exe -b to re-convert it to hv files.
So what is...
- Default.hv
Default.hv contain registrery information how are make after hard reset :
it contain :
HKEY_CLASSES_ROOT ressources and HKEY_LOCAL_MACHINE.
There are many thing to translate into !!
- user.hv
Same as default.hv but contain HKEY_CURRENT_USER .
Many things to translate too !
I have tried the second metod with only replacing mui files
and got the os to boot but had lost of problems and because I'm working on other projects I did not have time to figur it out therefor I released this kitchen for everyone to translate.
You'll need to do it the way xvx45 discripes abow
this is uploaded for translation I do not have time to translate it sorry
translation turtorial
on M$ side download the Professional version
Standard is for smartphones and professional is for PDA (Prophet)
Follow the steps in that turtorial for getting the mui files
the bin to use is the one PPC_XXX.bin where XXX is short for your language (PPC_GER.bin) is German and (PPC_DAN.bin) is Danish
Rapid share link to kitchen
download and extract
do not delete anything in SYS folder that you don't know what it does
OEM folder you can add things and delete things you don't want... but would be best to keep everything
ROM folder most be untouched same with tools folder they are there for building the OS
start BuildOS and choses what apps you want and press the green play button and wait for it to finish.. it will make a folder called temp
Overwrite the mui files in the temp\dump folder with those you have extracted from the emulator bin
now you'll need to change some names in the initflashfiles.dat (open with notepad)
when finished go to next step
now press CreatROM and wait for it to finish if there is any error then you have included to many apps in the BuildOS then you most go back to BuildOS step and remove some app
if no error then go to the temp folder and flash the OS.nb file to your phone
You can also use this guide as it's much similare
http://gullum.4shared.com will be updated with mui files for the differant languages
German, Danish, French, Italian, Swedish, Portuguese, Dutch, Spanish, Greek, Russian, Chinese Simplified, Norwegian mui files uploaded
Czech, Japanese, Korean will be next
I you have problems with alingment after every Soft reset
make a cab that adds a welcome.lnk to startup folder but link it to some other exe this should overwrite the alignment link and add that cab to extrom
Can't believe it....
Am i realy the first one downloaded the kitchen?
Good job gullum. Realy good.
Greetings from Germany,
skylow
Yes I am ready.. to cook..
Thank you for your work.
I'm now on my last stage to build the first WM6 rom to Prophet in Portuguese (I think)...
After two tries I think I got it now... But it's only a beta for now...
If anyone could help me with the dictionaries I would appreciate it!
c3l5o said:
I'm now on my last stage to build the first WM6 rom to Prophet in Portuguese (I think)...
After two tries I think I got it now... But it's only a beta for now...
If anyone could help me with the dictionaries I would appreciate it!
Click to expand...
Click to collapse
do you need dictionary for the keyboard?
Try this:
For dictionary(auto complete in keyboard)
http://www.portalppc.com/GL_Display.asp?SEC=7&EntryID=300
For spell check(in pocket word for example)
http://www.portalppc.com/GL_Display.asp?SEC=7&EntryID=299
thank you, i'm going to create a new thread
Thanks for the tutorial, it seems simple to do, but after download Windows Mobile 6 Professional Images (ESN).msi , (Spanish), it creates to me the file A.BIN.PAYLOAD, but to to realize this: I meet this problem
IMGFSFROMNB A.BIN.PAYLOAD IMGFS.BIN (it generates the file IMGFS.BIN) it leaves:
ImgfsFromNb 2.0 RC 2
Searching for IMGFS start...
Not IMGFS signature found. Exiting.
And does not create the IMGFS.BIN
it can help me?
Thnks
tiggerbcn said:
Thanks for the tutorial, it seems simple to do, but after download Windows Mobile 6 Professional Images (ESN).msi , (Spanish), it creates to me the file A.BIN.PAYLOAD, but to to realize this: I meet this problem
IMGFSFROMNB A.BIN.PAYLOAD IMGFS.BIN (it generates the file IMGFS.BIN) it leaves:
ImgfsFromNb 2.0 RC 2
Searching for IMGFS start...
Not IMGFS signature found. Exiting.
And does not create the IMGFS.BIN
it can help me?
Thnks
Click to expand...
Click to collapse
I have uploaded the spanish mui files
gullum said:
I have uploaded the spanish mui files
Click to expand...
Click to collapse
I am afraid to ask... but would it be possible to upload the dutch files too? I'm having the same problem (think it is Vista related).
THANXX
gullum said:
I have uploaded the spanish mui files
Click to expand...
Click to collapse
Ok, thanks
why Microsoft didn;t release arabic tell now for mobile, I hope it is not me
buildos don't work for me. under vista and under xp. ive installed .net and java both but nothing. give me a error when try starting.
help me please
Can the bent cooker use any base ROM like PDAViet's 4.0.0.0.5b Cross or k0ster v3?
rondol1 said:
I am afraid to ask... but would it be possible to upload the dutch files too? I'm having the same problem (think it is Vista related).
THANXX
Click to expand...
Click to collapse
Thanxxxx again!
i'm flashing...that God Bless me...
davidebeatrice said:
i'm flashing...that God Bless me...
Click to expand...
Click to collapse
...God don't blessed me...
my prophet stop on first splash screen after flashing and hard reset...
tomorrow ill try again...
(fucx!)
Please remove your portuguese files, as they are not complete... And result in more problems than mine...
Gullum...
gullum, i tried to dump your v6 with hypercore (dump nb bin and then pkg tool automatic mode) to change then language with nanoscopic kitchen...but there isn't oem and sys but a lot of directory...why? what i must do? thx!!!
davidebeatrice said:
gullum, i tried to dump your v6 with hypercore (dump nb bin and then pkg tool automatic mode) to change then language with nanoscopic kitchen...but there isn't oem and sys but a lot of directory...why? what i must do? thx!!!
Click to expand...
Click to collapse
I didn't use buildDSM you'll need compare the 2 roms and place the files in the right folders.
Hi Gollum,
BuildImgfs.exe crashes to desktop (without passing anything) at
00401F51 movzx ecx,word ptr [eax+2Ch] (eax=0)
Using CreateRom.bat it outputs
Processing " ☻ ☻H☻►☻►☻►☻►☻►☻►☻►☻►☻►☻►☻►☻►☻►☻►☻►☻ä☻ä☻ä☻ä☻ä☻ä☻ä☻ä☻ä☻ä☻►☻►☻►☻►☻►☻►☻
►☻ü♥ü♥ü♥ü♥ü♥ü♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥☺♥►☻►☻►☻►☻►☻►☻é♥é♥é♥é♥é♥é♥☻♥
☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥☻♥►☻►☻►☻►☻ ☻" as file
Click to expand...
Click to collapse
and dies at
00409B52 movdqa xmm0,xmmword ptr [esi] (esi=0)
greets,
lemmz
Well, I've searched the forum and I see where WM5 users have a hack to get BB on their Athena devices.
Is there a hack, or program mod to get BB on Athena with WM6? I've got a copy of the BB program. It tries to connect and something isn't allowing it.
Can someone point me in the right direction please? I need to get this working and I am a student and work full time. I'll be glad to contribute to your paypal fund. HELP.
I'm working on it. Stay tuned.
OK, got it working with AP Dual 3.0 by PK.
You have to do the following:
- Use a Hex-Editor and open the .nbh file from the update package
- Find the Text Unicode String: HTC-Athena and replace it with HTC-Hermes
- Find the follwing hex string:
1E3DA0E30D3083E3452FA0E30510A0E302 which means OS Version 5.2.1933
and replace it with the following hex-string:
4D3EA0E3063083E3452FA0E30510A0E302 which results in OS Version 5.2.1238
- Flash this to your Athena
- After boot use a registry editor and go to HKLM->System->Versions and change the vlue of Aku from .0.7.0 to .0.2.3
- Install Blackberry Connect Versionb 4.0.0.92 and go through the setup
- You're done, should work now
If some has webspace I can upload a fully modified version of the .nbh file.
Cheers
Is there a way to patch the official WM6 release from T-Mobile D? It comes as an exe File. No .nbh to patch.
Sebastian
c0rnholio said:
OK, got it working with AP Dual 3.0 by PK.
You have to do the following:
- Use a Hex-Editor and open the .nbh file from the update package
- Find the Text Unicode String: HTC-Athena and replace it with HTC-Hermes
- Find the follwing hex string:
1E3DA0E30D3083E3452FA0E30510A0E302 which means OS Version 5.2.1933
and replace it with the following hex-string:
4D3EA0E3063083E3452FA0E30510A0E302 which results in OS Version 5.2.1238
- Flash this to your Athena
- After boot use a registry editor and go to HKLM->System->Versions and change the vlue of Aku from .0.7.0 to .0.2.3
- Install Blackberry Connect Versionb 4.0.0.92 and go through the setup
- You're done, should work now
If some has webspace I can upload a fully modified version of the .nbh file.
Cheers
Click to expand...
Click to collapse
I've tried to do a ROM dump this weekend without much success. Can you back up a little bit for some one that isn't as technically savvy as yourself?
Do I need to flash to the AP dual 3.0 by PK first? Then modify the hex strings. I'm not sure how to do the hex strings. How much web space do you need for the files? I'm not certain of the exact order to do this.
Thanks,
Jacquie
jacquiegardner said:
I've tried to do a ROM dump this weekend without much success. Can you back up a little bit for some one that isn't as technically savvy as yourself?
Do I need to flash to the AP dual 3.0 by PK first? Then modify the hex strings. I'm not sure how to do the hex strings. How much web space do you need for the files? I'm not certain of the exact order to do this.
Thanks,
Jacquie
Click to expand...
Click to collapse
Here you go: http://rapidshare.com/files/84202603/AP_Dual_3.0_BB_Edition.rar.html
Enjoy
voegel said:
Is there a way to patch the official WM6 release from T-Mobile D? It comes as an exe File. No .nbh to patch.
Sebastian
Click to expand...
Click to collapse
You can use winRAR or winZIP to extract the exe and then you get the .nbh.
However, to shorten things up I did the job for you and uploaded the ROM to RS: http://rapidshare.com/files/8420583....35.111.3_1.50.00.00_Ship-BB-Edition.rar.html
It is not tested but should work without any problem. If not, you're on your own, it's your risk to flash it.
Cheers
c0rnholio said:
You can use winRAR or winZIP to extract the exe and then you get the .nbh.
However, to shorten things up I did the job for you and uploaded the ROM to RS: http://rapidshare.com/files/8420583....35.111.3_1.50.00.00_Ship-BB-Edition.rar.html
It is not tested but should work without any problem. If not, you're on your own, it's your risk to flash it.
Cheers
Click to expand...
Click to collapse
I understand complete and appreciate what you have done here. All this has changed so much since last I flashed ROMs (CE2003). Thanks.
jacquiegardner said:
I understand complete and appreciate what you have done here. All this has changed so much since last I flashed ROMs (CE2003). Thanks.
Click to expand...
Click to collapse
No problem mate, but the post you were quoting contains the link to the german rom. You have to use the other link I posted. Just wanted to make this clear to prevent you from accidently downloading and flashing the wrong file.
Cheers
c0rnholio said:
No problem mate, but the post you were quoting contains the link to the german rom. You have to use the other link I posted. Just wanted to make this clear to prevent you from accidently downloading and flashing the wrong file.
Cheers
Click to expand...
Click to collapse
Hi c0rnholio, nice job, as usual.
jacquiegardner said:
Is there a hack, or program mod to get BB on Athena with WM6? I've got a copy of the BB program. It tries to connect and something isn't allowing it.
Click to expand...
Click to collapse
...uh, what's BB? Big Brother?!?
c0rnholio said:
You can use winRAR or winZIP to extract the exe and then you get the .nbh.
However, to shorten things up I did the job for you and uploaded the ROM to RS: http://rapidshare.com/files/8420583....35.111.3_1.50.00.00_Ship-BB-Edition.rar.html
It is not tested but should work without any problem. If not, you're on your own, it's your risk to flash it.
Cheers
Click to expand...
Click to collapse
Thanks!! I will try.
voegel said:
Thanks!! I will try.
Click to expand...
Click to collapse
I tried twice, but I always get an error message regarding the image file. Flashing the original version works though.
Sebastian
voegel said:
I tried twice, but I always get an error message regarding the image file. Flashing the original version works though.
Sebastian
Click to expand...
Click to collapse
Is your Athena CID unlocked?
c0rnholio said:
Is your Athena CID unlocked?
Click to expand...
Click to collapse
No. Do I need to do that first? How do I do that?
please help!!!
Hello, I installed MICHYPRIMA ROM, and Blackberry connect version 4.0.0.106, Transport Version 4.0.0.102. I use BIS, and my terminal is CID unlocked. I tried to open the nbh file in order to modificate "the Text Unicode String: HTC-Athena and replace it with HTC-Hermes", and the hex-strings that you mencioned, but when I use any editor, it's impossible to find those strings. Is there a way you post detailed instructions and programs needed, to get bb connect working on my Athena? Thanks a lot
hi
before installing Tom rom I have decided to dump my original rom in case I needed to put it back.
anyway I have been able to dump the 4 Raw files. now I see that in the Kaiser section there is a guide on how to reconstruct a rom to make it flashable and I wonder if I can do the same with my Niki.
any expert could pls confirm this?
thanks in advance for your help.
cheers
edit: I ve just noticed that there are some other threads about this subject...anyway if someone can confirm the right procedure would be great. thanks
Yeah, also wondered about that Kaiser rebuilding tutorial.
Talked to a few people over PM who have the same problem.
But even in the Threads nobody who knows more about flashing/ROMs seem to be willed to help out with a fre informations. :-/
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Thyraz said:
Yeah, also wondered about that Kaiser rebuilding tutorial.
Talked to a few people over PM who have the same problem.
But even in the Threads nobody who knows more about flashing/ROMs seem to be willed to help out with a fre informations. :-/
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Click to expand...
Click to collapse
well..nice qustions..to which obviously I cant reply..hope someone will be so kind to help us out.
Thyraz said:
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Click to expand...
Click to collapse
a baserom is nothing more then a normal rom, just put a rom you like, together with the dumped filen in the kitchen folder. maybe ruu needs some information from the rom file itself, which are not present on the device.
what you find on your device is just that what you dumped. (but after hardreset)
.. i know that this not matters for you anymore. but eroG needs to know.
therealholg said:
a baserom is nothing more then a normal rom, just put a rom you like, together with the dumped filen in the kitchen folder. maybe ruu needs some information from the rom file itself, which are not present on the device.
what you find on your device is just that what you dumped. (but after hardreset)
.. i know that this not matters for you anymore. but eroG needs to know.
Click to expand...
Click to collapse
well yes I defenitely needed to know these things...
now, if it is not of too much trouble for you, where do I find a baserom and is there a guide on how to do it...just to avoid stupid mistakes while doing it?
thanks a lot
So, from baserom there are not much information used. (Perhaps Header information for Rom file, or something like that)
My new ROM is (more or less) the same result as on my device?
And Baserom isn't a own file format, i can use the wwe-rom postet here in the forum?
thx for help
Thyraz said:
And Baserom isn't a own file format, i can use the wwe-rom postet here in the forum?
Click to expand...
Click to collapse
Yes that should work fine.
request guide on how to get dumped rom back to device
i've read alot about how to dump rom from device and how to get dumped rom back to device.
the more i read i got confident how to dump rom .... did it .. and now have my 4 raw files.
on the other hand the more i read about how to get dumped rom back to device ... more and more i got unsure how to do it.
so please all senior posters and specialists - can you please post a cookbook on how to get it back to the device ?
thanks ! alot and keep up the good work here !
Sackbauer, I totally agree with him.
I have 4 Raw files for a Norwegian ROM, but how do can i "transform" them into a acctually "flash" file?
Please someone with the knowledge, write a "easy to understand/ step by step" guide to the ones that don't have a clue about this..
Ole
im getting kinda confused with this also, dumping the rom is no big deal, but putting it back together and flasing my phone with it, thats the big how to...
I has contact with Tom.
And he busy with vietnamese new year now.
He said will back after 1,2 day and answer all questions..
Don't worry
... good to hear that tom will take care after his new year ;-)
also keep my fingers crossed that someone is able to check radio rom and possibly enable gps and wifi ...
let me try first:
- download this kitchen
- Copy your part01.raw and part02.raw into the BaseRom Folder of this kitchen
- Copy a Nike RUU_signed.nbh into the BaseRom Folder (e.g. tom_codons rom just open the. exe with winrar and extract the file)
- Open !Begin.cmd, press 2 and do everything, what is prompted
- Open !Cook.cmd and do what is prompted
- when HTC Rom Tool is opened press Rom_Builder and ... right from System. Then Choose os_new.nb and press built
i wrote this without testing again. so if i missed something tell me, please and i'll try to help.
sounds good !
will try it later this evening and will let you know ...
thanks so far
omg .... it appears that i just "cooked" my first rom out of my dumped files from my niki .
thanks therealholg for your guide !! thats what i was looking for.
the only thing which makes me a bit nervous about reflashing my just cooked rom onto my device is that during cooking it sometimes says "file not found".
but after ignoring these messages i have a nbh file which obvioulsy was not in the folder before !!! ;-) yeah
so, now i know how to revert the process but i am to anxious to try it as this is my only niki.
lets see and wait what others say about the step by step guide of therealholg ...
in anyway - you made my day therealholg
cheers
wow... thanks for this...
tryed it out and works...
the only thing is that it still says Niki Project on the boot screen...
everything else works just fine
marazi said:
wow... thanks for this...
tryed it out and works...
the only thing is that it still says Niki Project on the boot screen...
everything else works just fine
Click to expand...
Click to collapse
You can add the splash screen in HTC Rom Tool.
therealholg said:
let me try first:
- download this kitchen
- Copy your part01.raw and part02.raw into the BaseRom Folder of this kitchen
- Copy a Nike RUU_signed.nbh into the BaseRom Folder (e.g. tom_codons rom just open the. exe with winrar and extract the file)
- Open !Begin.cmd, press 2 and do everything, what is prompted
- Open !Cook.cmd and do what is prompted
- when HTC Rom Tool is opened press Rom_Builder and ... right from System. Then Choose os_new.nb and press built
i wrote this without testing again. so if i missed something tell me, please and i'll try to help.
Click to expand...
Click to collapse
What to do with part00.raw and part03.raw?
Part00.raw is the are with IPL, SPL and Splashscreen. We don't want to override our new SuperCID Bootloaders
Part03.raw is content of your local storage ... i think you can't flash this area with ruu.
hi all friends...!
I'm just back from some days busy with vietnamese new year.
And have made code kitchen for reconstruct a dumped rom niki device.
What we need to do now ?
1. Copy part02.raw u dumped from original rom to Tools folder and run step1.bat
2. Extract RUU_signed.nbh from Ship rom and put in ShipRom folder.
Link download :
http://www.asia.htc.com/download/RU....707.09_Radio_Nike_1.58.16.27_signed_Ship.zip
Or here :
http://www.asia.htc.com/download/RU....871.14_Radio_Nike_1.58.16.27_signed_Ship.zip
3. Run Reconstruct a dumped rom.cmd in my Tools and wait some times.When page DOS done it will exit .U go to Update_Rom folder already have new RUU_signed.nbh.This files reconstructed your original Rom with your languages.
Have funs..!
Hi all, I'm trying to make Fido Call Display to work on my Device, and I found the solution here. However the solution requires me to cook the rilphone.dll file into the ROM that I'm using (NAFT's v2.3). I've never cooked a ROM before and I'm far from understanding the procedure, but I don't think it's that hard to add a file in a cooked ROM. Can you guys help me out with this?
Please show me how to add/replace rilphone.dll in NAFT's v2.3 ROM. Thank you.
Replied on other thread
Da_G said:
Replied on other thread
Click to expand...
Click to collapse
Da_G said:
Yes, the reason my method does not work is because the rilphone.dll is not signed with a trusted certificate as I stated..
Pretty much leaves the only option as cooking it in, unless you are already using a ROM with a modified nk.exe in XIP to disable certificate checking.. then you can just drag and drop rilphone.dll and reboot.. but since stock ROMs are not modified in such a way, you cook it in, as all files cooked into ROM are trusted..
Unfortunatly there is no way to modify XIP without cooking either.
If a ROM is unprotected (still has it's rgu's) - download a ROM kitchen for your device.. extract the rom of your choice.. replace rilphone.dll in \OEM\OEMDrivers.. then re-assemble the ROM.. no registry manipulation needed.
For the raphael ROM kitchen, name your ROM "RUU_Signed.nbh", put it in \BaseROM
Run RaphaelKitchen.bat
select "e" for extract, then "a" for "From RUU_Signed.nbh"
let it go through its motions, when it's done replace rilphone.dll in \OEM\OEMDrivers
again in RaphaelKitchen.bat select "cf" then "b"
click "BuildOS" tab
click "Load ROM" button
navigate to RaphaelKitcken folder (has subfolders OEM, ROM, SYS, etc), press ok
click green "Go" button
when done, close the window
again the kitchen will go through some motions, when it pops up XVI32 and says "Page Pool Changer" in the command prompt window simply close xvi32
now it should prompt to flash to your device.. and you're done
Click to expand...
Click to collapse
Ya, I tried it with NAFT's v2.3, but it seems that the file is protected... the file can't be read.
I'm not sure I understand, you tried to cook the file into ROM and it gave you an error about it being protected? Or do you mean you tried to copy the file to the device, and it wouldn't let you overwrite? If that's the case that's why I suggest renaming rilphone.dll to rilphone2.dll before you copy to device, and then change the registry to point to that.. that way you don't have to overwrite the file that's already on the device.
Da_G said:
I'm not sure I understand, you tried to cook the file into ROM and it gave you an error about it being protected? Or do you mean you tried to copy the file to the device, and it wouldn't let you overwrite? If that's the case that's why I suggest renaming rilphone.dll to rilphone2.dll before you copy to device, and then change the registry to point to that.. that way you don't have to overwrite the file that's already on the device.
Click to expand...
Click to collapse
i tried what you told me to do on the other post; Rename the file, and extract it... I have no problem renaming the file, but when I tried to extract it with Raphael Kitchen, I got error like "Cannot read the file" or something like that... here is the dump log
ImgfsToDump 2.1rc2
Cannot map file imgfs.bin
Click to expand...
Click to collapse
Nothing was extract.
hmm, sounds like the ROM kitchen is having a problem handing the .nbh you fed it, try it with a stock nbh and see if it works..
the rom you are trying to extract may be protected from extraction.
Just to make sure, you are trying to extract the ruu_shipped.nbh in \baserom.. which is the ROM image, somewhere in the range of 50 to 200mb large..
Da_G said:
hmm, sounds like the ROM kitchen is having a problem handing the .nbh you fed it, try it with a stock nbh and see if it works..
the rom you are trying to extract may be protected from extraction.
Just to make sure, you are trying to extract the ruu_shipped.nbh in \baserom.. which is the ROM image, somewhere in the range of 50 to 200mb large..
Click to expand...
Click to collapse
I redownload the Rom and it seems to work now. I can finally extract it.
As for the rilphone.dll... do you have the right one for Rogers Display? and the one that will work for Fido as well?
edit: I successfully reflashed my ROM, but the display thing doesn't work. Beside replacing rilphone.dll is there any reg I need to change? (can you give me the right rilphone.dll file?
I got the rilphone.dll file here
Sucessfully cooked in NaFT's v3.1, however it still doesn't work. It always show unknown Caller.
any help here would be much appreciated