Related
New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
This kitchen is based on sprint 3.35 release
NOTE:This is an os rom. radio 3.35 and olipro 2.40 unlocker required.
Features:
* Only 57 mb, includes all tools and everything.
* Very easy to cook. just run buildflash.bat and follow instructions.
* Clean
oem folder has been cleaned, windows live and some other stuff is removed from sys, Every program has its own folder. if you want it to be cleaner just delete related folders from sys folder.
* Adjusted security policies
* based on original sprint release. It is not a remixed version. Almost everthing extracted from original sprint rom, including xip, sys, oem drivers etc.
* Fixed PIE, not freezing anymore.
I have spent lots of time on it and have adjusted lots of stuff that i cant remember.
I have learnt most of stuff from xda-developers.com, ppcgeeks.com, howardforums.com , no2chem and dcd and they are source of some of the packages i have included. So thank you all.
It would not be possible without the wonderfull kitchen tools either.
So please thank them also if you like this kitchen.
Instructions: Just run buildflash.bat and follow instructions.
http://www.megaupload.com/?d=JMST2UF9
March 30 UPDate:
http://rapidshare.com/files/103708242/a1kitchen.zip.html
Disabled extended rom , added some more oem's such as telus mobile email, metrix, x button etc, fixed sprint epst
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Sopranokam said:
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Click to expand...
Click to collapse
Link is working now.
Yes gps is working, tested with tomtom, windows live and google maps.
No no problems with DST, alarms etc.
Yes stock dialer is OEM'ed.
Link not working?
The file you are trying to access is temporarily unavailable.
etexter said:
The file you are trying to access is temporarily unavailable.
Click to expand...
Click to collapse
Ignore. I got it from megaupload finally.
Thanks for the perfect kitchen...
No bugs, fast, easy to customize and no attempt to install bleeding edge updates!!! This is exactly what I was looking for.
Thanks again!!!
my experience.
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
artiss said:
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
Click to expand...
Click to collapse
That is weird. You might want to try without any add-ons and reprogram your phone via *22803 using option 1 and then option 2 to update prl.
I have flashed 5-6 phones ... have not had single problem in last three weeks.
No body else has complained at ppc or xda yet. Since not even one other person is having same issue, I am guessing it’s not a bug; it’s just your settings.
If you can help me with duplicating the problem on my phone, i probably can fix it.
Tomtom issue is not rom related. Tomtom maps should be stored in folder in the root directory of sd card.
Sure what info would you like to know? I performed the following:
- Installed the Olipro 2.40 unlocker
- Flashed with Sprint Rom 3.35 latest
- Used the buildflash.bat on a windows box to create my install
- Installed the created rom
- Performed a *22803 with option 1 & 2
- Checked with Telus that I do infact have a data plan
- When I connect to the internet either through Opera or IE I get this message "Cannot connect for an unkown reason blah blah please check settings"
Now I have tried with a username & password (esn dec) with no luck. Now with my ignorance I have misplaced the data I wrote down on MSID, NAI, DUN, etc numbers so I have no way of verifiying that data. Now when I installed the sprint rom it started the install its extra stuff after an accidental power cycle - did that fubar stuff? Should I of relocked my phone, reinstall telus, then re-unlock and perform the above steps?
So with tomtom the maps are in the root of the SD? In a dir? Do I have to edit the currentmap.dat file?
Thanks for the quick reply and help - what other info do you want
from here
http://rapidshare.com/files/103173398/Erase_Extended_Rom.zip.html
flash the attached rom ( it includes flashing utility) . it will erase sprint stuff you have in extended rom.. that should fix data problem
tomtom maps should be \\storage_card\usa and canada maps
no need to edit any files
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
artiss said:
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
Click to expand...
Click to collapse
i have followed the steps you lave listed, still i am unable to duplicate the problem.
may be flash telus oem, get data working and then copy every single epst setting before you reflash.
inorder to flash telus oem you will need relocker from ppc site.
EDIT: seems like internet problems are related to sprint customization..
http://forum.xda-developers.com/showthread.php?t=380820
Cant get to epst on sprint either
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
a1jatt said:
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
Click to expand...
Click to collapse
It dont work either way...codes or windows folder!
How to reinstall
On the Kitchen we have a folder named OEM with some program on it
how is possible to reinstall that progral like "HTC_CommManager_Titan"
Thank You
Alain
NotLutzik said:
It dont work either way...codes or windows folder!
Click to expand...
Click to collapse
here is the fix.
http://rapidshare.com/files/103708242/a1kitchen.zip.html
Update 2009/04/12
Here is a working cab to enable "Rogers/Fido Call Display" by Captain_Throwback. This cab has been tested and proven to work with many ROMs. I've personally tested it on "Energy" and "RoMEOs" ROMs and it work like a miracle. A big bravo to you, Captain
----------------------------------------------------------------------------
The QUICK/EASY method on Post #14 only work for ELITE RC2 (cab file included)
----------ROMs that work for Raphael----------
NATF's v4
Lantis OS 21009 AKU 1.5.0 v3.00
RRE Canadian 4.1
PROven ROM 1.12
Elite RC3 will include this option
For Da_G ROM and Shipped ROM, you simply have to replace the dll file
----------This is how you do it, for chefs----------
After 33 hours straight non-sleep, and plenty of pm to Da_G and NATF, I can proudly say that we've found the perfect answer for this problem
and finally we can put an end to this question "how to make Rogers/Fido Call display to work?"
I've tested this and believe that this solutions may work for any ROM. So far I've tested with 2 of NATF's ROMs, but I need someone to test
this on Kaiser and other device as well. You don't need to used a Shipped ROM, but you can apply these step to any of your favorite ROM.
2 simple steps in summary:
First you need to cook rilphone.dll file into your ROM in the folder /OEM/OEMDrivers/
Second, you need to change the file that setup all the registry key to your device when you flash
For Fuze (may be different for Kaiser), this is the file: /OEM/OEMDrivers/de3f3189-9f71-4162-9f26-39393dcc8c94.rgu
(I attach the original file from Da_G's clean ROM)You can either just replace this file or simply go in the file and Make
sure that all lines related to these regs are the same as the one I've posted here (took from Da_G's ROM)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
POST #12 includes all registry lines that I've modified
The Files are attached.
----------How to cook rilphone.dll into your favorite ROM, from Da_G's words----------
Code:
[B][COLOR="Indigo"]-=01=-[/COLOR][/B] Download a ROM Kitchen for your device, for Fuze is RaphaelKitchen
[B][COLOR="Indigo"]-=02=-[/COLOR][/B] Extract Kitchen
[B][COLOR="Indigo"]-=03=-[/COLOR][/B] Copy your favorite ROM *.nbh file into \BaseROM\ folder (from extracted Kitchen)
[B][COLOR="Indigo"]-=04=-[/COLOR][/B] Rename your *.nbh file to RUU_Signed.nbh
[B][COLOR="Indigo"]-=05=-[/COLOR][/B] Launch "RaphaelKitchen.CMD" from *Kitchen\ folder
[B][COLOR="Indigo"]-=06=-[/COLOR][/B] choose "e" for extract, then "a" for from BaseROM "RUU_Signed.nbh
(if everything work so far, your dos should be running on it own now)
[B][COLOR="Indigo"]-=07=-[/COLOR][/B] When it's done, check if you have these three main Folders
+/OEM
+/SYS
+/ROM
(make sure they are not empty or only have 1 sub folder. if this is the case,
then your favorite ROM is protected... ask the cook nicely to share with you
those 3 folders)
[B][COLOR="Indigo"]-=08=-[/COLOR][/B] replace these 3 files into /OEM/OEMDrivers/
[URL="http://forum.xda-developers.com/attachment.php?attachmentid=141542&d=1230689478"]+"rilphone.dll[/URL]",
[URL="http://forum.xda-developers.com/attachment.php?attachmentid=141541&d=1230689478"]+"de3f3189-9f71-4162-9f26-39393dcc8c94.rgu"
+"de3f3189-9f71-4162-9f26-39393dcc8c94.dsm"[/URL]
[COLOR="Red"][B][SIZE="2"]It's recommended that you modify the *.rgu file instead of replacing it for a moded ROM,
because of all the tweaks chefs have added.)
For list of registries that I've changed in the *.rgu file, [URL="http://forum.xda-developers.com/showpost.php?p=3106249&postcount=12"]READ POST #12[/URL][/SIZE][/B][/COLOR]
[B][COLOR="Indigo"]-=09=-[/COLOR][/B] Launch "RaphaelKitchen.CMD" from *Kitchen\ folder again
[B][COLOR="Indigo"]-=10=-[/COLOR][/B] chose "cf" for cook and flash a ROM, then "b" for "if you want to use the
new BuildOS+Package..."
[B][COLOR="Indigo"]-=11=-[/COLOR][/B] Ervius Package _tool+BuildOS windows will launch, choose "BuilOS" tab
[B][COLOR="Indigo"]-=12=-[/COLOR][/B] click on "Load ROM", now choose your Kitchen/ Folder where you have
OEM/ROM/SYS folder, then click ok
[B][COLOR="Indigo"]-=13=-[/COLOR][/B] Click on RUN, once it finished loading the ROM. When you see the
word "Done" Close Ervius by clicking on the "X" button
(your DOS will run again, and ask you to press any key to start... Press
the "any key" :p )
[B][COLOR="Indigo"]-=14=-[/COLOR][/B] While it's running, it will open a tables with a bunch of numbers that
you don't understand
(it's checking the memory)... just close it by clicking on the "x" button.
(your Dos will run again, till you get your favorite Flash Window come up...
from here, you're on your own)
Don't forget to HardSPL your device before FLashing your device.
Let us know if this method work for you.
I'm also inviting all the Chefs to join the fun and provide us a Canadian version.
----------Credits----------
This tweak isn't perfect, but took me a while to make Rogers/Fido Display work. However I wouldn't be able to get this far without the helps of Da_G, NATF, trueg and a bunch of other people that I've bugged.
At least give some credits to those who have spent so much time to make this finally happened. Like Da_G said, a donation isn't required, but always appreciated.
Donate
Also, thank nitroblu and y2whisper and other Canadian users who has tested and post their results
There were many bounty offering for this discovery, but none of them keep their words... so disappointed... anyway
----------Found issues----------
1- Does not work while MSVC phone notification is activate.
2- May have issues with QuickGPS (not yet confirmed)
3- It froze my device every-time I run it with spb Wireless (need confirmation)
Can any Mod Change the topic of this one to "[Tut]First step to Canadian ROM, Rogers/Fido Display on your Fuze"
Click edit on the first post, then click advanced edit, you can change the topic from there
Da_G said:
Click edit on the first post, then click advanced edit, you can change the topic from there
Click to expand...
Click to collapse
Thank you... Now, I'll leave the Rom Cooking to the real Chef... I'm going to bed
so happy now
Hi pandaboyy,
Thanks for doing all the hard work. I am in Toronto and use Rogers and ever since I got my Tilt2 earlier this year I have been missing the name display. I just got my Fuze from the states today and installed NATF v3.2 rom. I look forward to having name display working again.
Just one question: any way to put this in a cab or build it into NAFT roms?
Thanks again.
Rob.
talonrob said:
Hi pandaboyy,
Thanks for doing all the hard work. I am in Toronto and use Rogers and ever since I got my Tilt2 earlier this year I have been missing the name display. I just got my Fuze from the states today and installed NATF v3.2 rom. I look forward to having name display working again.
Just one question: any way to put this in a cab or build it into NAFT roms?
Thanks again.
Rob.
Click to expand...
Click to collapse
Hey Rob,
I was about going to TO today to celebrate New Year Eve, but since I didn't sleep I got lazy out and drop the plan (true story). I don't think a cab would do the job. Da_G did explain it, but trust me, I still don't understand why
Da_G said:
Yes, the reason my method does not work is because the rilphone.dll is not signed with a trusted certificate as I stated..
Click to expand...
Click to collapse
And since I'm far from a chef, I really don't know how to cook a cab sorry.
However, try the cooking process that I mentioned in the first post. It's as easy as 1-2-3 and it's fun to start understand a little bit how your device work. Once you open the "de3f3189-9f71-4162-9f26-39393dcc8c94.rgu" file, you'll see that's the whole reg setting of your device. This may helps in the future, because you can actually customize your ROM so that whenever you re-flash it, your reg is already added.
Just try the Kitchen_Raphael (it's small and very easy). It'll take you about 15min to do the whole thing... with NAFT's permission, I'll try to release v3.2 with Rogers display. However, here is a good news for you; NATF is trying to release the first Canadian ROM very soon
Help me to Help you
I was trying change the entry in de3f3189-9f71-4162-9f26-39393dcc8c94.rgu file instead of replacing it to keep all the Tweaks that NATF has done. However, I come up with this error when I tried to build the ROM
"Error building default.hv and user.hv! (see "BuildOS-log.TXT")
I take a look at the file again, and I don't see any important different except for the file properties (ignore the size). Look at the image. The working file is hidden and the hidden option is disable. The non-working file is hidden, but not disable
how do I change make the file hidden and disable the option? I know that DOS can do it, but I just don't know the command.
EDIT---------------------- Solved the problem, but still want to know how to disable Hidden option-----------------------
Ok, I've read several post around the forum, and quite honestly, it didn't help much.
so I did a trial and error... If you want to edit your the de3f3189-9f71-4162-9f26-39393dcc8c94.rgu instead of replacing it, Don't overwrite the file.
1- After you finish to edit save it with another name eg: de3f3189-9f71-4162-9f26-39393dcc8c94_test.rgu.
2- Delete the original file (or move it somewhere else to be sure)
3- Rename your test file to the original name: de3f3189-9f71-4162-9f26-39393dcc8c94.rgu
4- Right click on the file, Properties then make it Hidden
(You may find this funny, but this is my amateur way)
monx said:
that file has system attributes. run this from command prompt to remove all attributes & locked attributes.
attrib -s -h -r -a filename.ext
your rgu file must hv unicode encoding, REGEDIT4 in line 1 & blank space on last line to avoid rgucomp error.
Hope this helps.
Click to expand...
Click to collapse
You mean
attrib +s +h +a filename.ext
then leave 1 empty line on the last line... do I have to add 1 space as well?
Just has to end with a blank line, rather than ending with a registry entry
Da_G said:
Just has to end with a blank line, rather than ending with a registry entry
Click to expand...
Click to collapse
Cool, thanks
Ok, I have successfully change the rgu file. It's one of these Lines, but I don't know which yet and I have no energy today to test 1 by 1 again... so if you can test it for me it would be great
Here are the lines that I've changed to make Call display work
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ; for HTCmaskW1
"HTCmaskW1"=dword:1871
"HTCmaskW1BitMask"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ;for A5/2, A5/3
"En52"=dword:1 ; A5/2
"En53"=dword:1 ; A5/3
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ;for remove RX Diversity
"RMRXDiv"=dword:0 ; Enable
[HKEY_LOCAL_MACHINE\Software\OEM\RIL]
"DisH"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableAutoPickupAtSilentMode"=dword:1 ;disable by default
add ---> [HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\69]
"Timeout"=dword:7918 ; 31 sec.
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\82]
"Timeout"=dword:1D4C0 ; 120 sec.
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\81]
"Timeout"=dword:1D4C0 ; 120 sec.
[HKEY_LOCAL_MACHINE\Comm\Cellular\RIL\RemoteCalltype]
"CalltypeDLL"=" PTTCalltypeCallback.dll" ; DLL containing the callback routine
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000100c"=dword:800 ;Service Loading (SL) Message Policy
[HKEY_LOCAL_MACHINE\Software\OEM\RIL\OperatorContexts\20801] ;Orange FR
"GPRSContextNumber"=dword:2
"UMTSContextNumber"=dword:2
[HKEY_LOCAL_MACHINE\Software\OEM\RIL\OperatorContexts\20810] ;SFR (Voda FR)
"GPRSContextNumber"=dword:2
"UMTSContextNumber"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"BattSuspendTimeoutBackup"=dword:3C
"BatteryTimeoutBackup"=dword:1E
"BattSuspendTimeoutInCall"=dword:30
"BatteryTimeoutInCall"=dword:30
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"EnableIMSIAttachedIcon"=dword:1
Perhaps someone can pick this up for me since I'm not much of a registry guy.
Here is a weird thing that I found about this Tweak
When someone call, the ID will display and all... However, in Call history, it will only display the caller Name if it's a missed call. If you answer it, then it won't show the name ID in call history, but only the number... I'm testing it with FuzeBerry v6 theme. Can anyone confirm this?
and if you know how to fix this, it would be great
Ok, for this tutorial, I deserved a kiss
History:
you all know how I didn't sleep for 2 days just to find what needed to be done to make it work. Now after my 10hr sleep and a bunch of parties for new years, I finally found a way to do this without cooking anything. I need someone to test it for me thou. I've tested on NATF's and Elite's ROM and it works. If this work, a thank you would do.
The Basic:
The Main idea to make this work is to replace the rilphone.dll file and add some registry into it, like I was explained in the first post. Some people claimed that those files need to be cooked in, well, you don't however, you can't just replace rilphone.dll it just doesn't work that way. But I found a way
So How to do it?
1- Download rilphone+reg.zip file from this post
2- Extract the file and you'll find
+rilphone.dll
+rilphone2.dll
+rilphone.reg
3- Copy rilphone2.dll into your Device in \Windows\ folder
4- Copy rilphone.reg anywhere
5- Importe rilphone.reg to your registry (I used resco registry to do this)
6- Change this registry from your device
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone2.dll"
7- reboot
8- copy rilphone.dll into your device \Windows\ folder
9- Change the registry back to
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone.dll"
10- Soft Reset
11- Delete rilphone2.dll
12- Soft Reset
13- Give me a hug
***Please report which ROM have you tried this method with and if it works or not***
--------Edit---------
Ok, so it doesn't work for every ROM. It worked with Elite RC2, thou... I'll give it more tries tonight. Stay Tune
If you want to try this process, please make backup of rilphone.dll first
And please try to put step 5 at the end.
Instead of trying all this, try the cab on post #26... if it doesn't work, just uninstall it. Backup rilphone.dll first. Worst case, just do a hard reset.
---------------------
--------ROM tested with cab-------
- Elite RC2 -> Work
- Proven 1.08 -> did not work
- Romeo -> did not work
-------- I'm sick of flashing and hard reset, so I'll stop here. If you're already on other ROM. let me know.
Good to see you we're able to get this working.
I didn't modify any part of the RGU file in OEMDrivers, so I'm just gonna drop the new DLL and the RGU/DSM you provided here into my v4.0 kitchen.
NotATreoFan said:
Good to see you we're able to get this working.
I didn't modify any part of the RGU file in OEMDrivers, so I'm just gonna drop the new DLL and the RGU/DSM you provided here into my v4.0 kitchen.
Click to expand...
Click to collapse
Ya, it should work... however, can you check if the RGU/DSM file didn't affect QuickGPS? I didn't make any change there, but just check for sure.
Finally, I can sleep with ease now...
My next wish, somebody make a cab or 2 to make my previous post easier
Only problem with non-cook method will be, if target ROM is not cert patched, or doesn't have certificate loaded from rilphone.dll signature it will refuse to load rilphone.dll due to not being signed with a trusted cert..
hey pandaboy,
tried this on my fuze but didn't work, (using proven rom right now) my wireless radio stops working after. i even tried starting over by deleting your rilphone.dll file and softresetting to get my phone working and did the steps again. no go.
Same, my radio is not working now either. Is there anyway to get my radio back?
just delete the rilphone.dll file from your windows directory and perform a soft reset
y2whisper said:
just delete the rilphone.dll file from your windows directory and perform a soft reset
Click to expand...
Click to collapse
When i try to delete it it says cannot delete the file.
Works for my sprint touch pro.
1) install S2A
http://forum.ppcgeeks.com/showthread.php?t=53600
2) install and follow instructions
http://forum.ppcgeeks.com/showthread.php?t=54856
Cant you just put the phone on speaker and go to programs - voice recorder and record the phone call that way?
I can confirm this is working on my Sprint Touch PRO!
Thanks!!!
pinny said:
Hey, this will not work on CDMA, it's in the wrong forum,
I think the mod's should move it, (or make it work for CDMA?)
Click to expand...
Click to collapse
Thats funny cuz I def just installed it and it's working on my Sprint Touch Pro
Hey, you're right, I think I installed the S2A from smotrs maybe that's why it didn't work,
but now it's good,
(I will edit my previous post, so not to confuse people).
It doesnt work on MightyROM 4.11. Other callers voice is soft.
DOH
TheRealM80 said:
It doesnt work on MightyROM 4.11. Other callers voice is soft.
DOH
Click to expand...
Click to collapse
I second that. Motherflippin. Is there a reg setting missing somewhere, or is it an audio driver issue?
Still doesnt work on MightyROM 4.12 either.
DOH
C'mon people lets figguure dis out.
Thanks
-80
Works with Juggalo's rom perfectly
Yeah its not working on MightROM 4.12 for me either. My voice sounds fine.....incoming caller can barely be heard
It's working on my Sprint Touch Pro, but the incoming voice is very faint. Anyone sort this out yet?
Thanks!
To anyone that have had any success with true, real recording (read: not plain sound bleeding from the speaker to the mike):
Could you please post your results to http://forum.xda-developers.com/showthread.php?t=496303 in order to be able to collect all the working model & ROM & hack combos in a nicely formatted chart / list and not forcing users to read thru 50-60 page-long threads?
mxl180 said:
Works for my sprint touch pro.
1) install S2A
http://forum.ppcgeeks.com/showthread.php?t=53600
2) install and follow instructions
http://forum.ppcgeeks.com/showthread.php?t=54856
Click to expand...
Click to collapse
Is this supposed to work with the Stock ROM from Sprint the way it comes originally? or do we have to have one of the custom ROMs installed?
I tried it on my new Touch PRO and after the step to install the wavedev.dll and soft reset, I get an error saying "voicecmd.exe experienced some error plese restart voicecmd.exe." and after that when making or receiving call the other party can't hear me, nor can I play any audio out of the device.
Detailed instructions for installing ICR for Sprint's Touch Pro w/ manufacture's ROM
SoloStyle said:
It's working on my Sprint Touch Pro, but the incoming voice is very faint. Anyone sort this out yet?
Thanks!
Click to expand...
Click to collapse
SultanH said:
Is this supposed to work with the Stock ROM from Sprint the way it comes originally? or do we have to have one of the custom ROMs installed?
I tried it on my new Touch PRO and after the step to install the wavedev.dll and soft reset, I get an error saying "voicecmd.exe experienced some error plese restart voicecmd.exe." and after that when making or receiving call the other party can't hear me, nor can I play any audio out of the device.
Click to expand...
Click to collapse
Here is what I ended up doing on my Sprint Touch Pro, which has its manufacture's ROM (version 2.01.651.6) and runs on wm6.1, to install ICR successfully:
1) Note: In these steps, you will end up replacing some files in the Window's folder. The consequence is that you will not be able to delete the ICR program entirely once you do the replacements. If you do delete the ICR program partially, you will not be able to re-install it without doing a hard reset.
2) Note: To achieve the file replacements in the wildow's folder, my instructions have file renaming scheme. Others use a program called Total Commander to do it.
3) Go to the Windows' folder (which you will find under Start, Programs, File Explorer, select Device and click "Up" until you are at the highest level, then click on Windows's foler). Click on Menu, and choose "Show all files."
4) In the Windows folder, find and copy the file wavedev.dll to your microSD card. It is important that you obtain a copy of this file before you do anything else if your phone is CDMA such as those for Sprint Touch Pro. According to another post in PPC Geeks forum, GSM phones should not do this step, but it wouldn't be bad to save file in case you want to erase programs and this file is needed.
5) Install Conflipper Slide 2 Answer.cab and do a soft reset (You must change the original S2A to this CDMA S2A or any other CDMA S2A that allows a red light to appear on your screen when you start call recording. None of the original Sprint S2A's will work. This S2A will look the same as the original Sprint one, but it will have the red light capability and thus be compatible with the ICR program). (You may also use Juggalo_X's CDMA S2A, but I did not try it. If you do want to try Juggalo_X's CDMA S2A, be aware that he has a black and white version. The white version is like your original HTC/Sprint version of S2A. I tried his black version, but it would not erase when I wanted to erase it. But that could be from the ICR program that I had installed.)
6) Install InCallRecording_Wavdev DLL.cab and do a soft reset. (There are many versions of ICR CAB, but I was successful with this one. I did not try all the other ones.) After soft resetting, you will get some sort of page pop up saying something like "voicecmd.exe experienced some error please restart voicecmd.exe." Ignore this for now, and be aware that at this time you will not be able to talk on you phone because the ICR program replaced the file wavedev.dll in your Window's folder with its own version of this file, which is not compatible with Sprint's Touch Pro.
7) Extract the two files in ICR_BEEP.zip (ICR_BEEP.wav, ICR_BEEPBEEP.wav) to Windows folder. This purpose of these two files is to stop ICR from beeping during recordings that the ICR program will play every minute or so. In some state's you may legally have to let ICR beep to warn the other person that the call is being recorded. So before replacing these beep files and using ICR, check your local laws for compliance.
8) This step may not be necessay, but I never tried ICR installations without it to find out: Extract voAMRNBEnc.dll file to Windows' folder. (If it does not allow to do it, first extract it to your microSD card and rename to something else like XXXvoAMRNBEnc.dll. Now extract the renamed file to Windows' folder. Find the same file that already exists in Windows folder "voAMRNBENC.dll" and try to rename this file to something else like ZZZvoAMRNBEnc.dll, which you will delete later. Now go to your renamed file (XXXvoAMRNBEnc.dll) and name back to voAMRNBEnc.dll. Soft reset and come back to Windows' folder to delete ZZZvoAMRNBEnc.dll. Soft reset again.)
9) Do not do this step if your phone is GSM: If your phone is CDMA, go to your microSD card and copy the file wavedev.dll, which you had copied to your microSD in step 2. Then, go to the windows' folder and paste it there. The files will come up as "Copy of wavedev.dll," and make sure that you do not change this name (i.e., do not delete "copy of" portion of the name). (Because the ICR program that you installed put its own wavedev.dll file in the Window's folder and eliminates the original one, this step is necessary to restore the original wavedev.dll file that was in your Window's folder.) Now, soft reset, and your phone can should be able to have sound again. Now, the error message following the installation of the ICR CAB mentioned in step 6 should not come up after soft resetting.
10) For Sprint's Touch Pro, the in-call recording requires that you put the call on speaker, but the sound quality is very good. (I don't know whether the conversation is being recoded by the mic from what the phone's loud speaker says or internally by the ICR program. However, when I turned on the speaker and blocked it with my hand, the sound quality of the other person calling did not change.) Additionally, the ICR program only works during phone calls. After the call is connected, click on menu in the call screen, and choose "Start Recording."
Disclaimer: Use my instructions at your own risk. Back up all your data, and be prepared to hard reset your phone if your phone gets missed up in the process.
Good websites for the above derived info:
http://forum.xda-developers.com/showthread.php?t=476316&page=2
http://forum.ppcgeeks.com/showthread.php?t=54856
http://forum.xda-developers.com/showthread.php?p=3489845
http://forum.xda-developers.com/showthread.php?t=474920
Good luck and please post your results plus detailed instructions as I have for other phones like Sprint's Touch pro2. I may buy it once they release the official wm6.5, and I want to be able to use ICR with Sprint Touch Pro2 running on wm6.5. And somebody tell HTC to lighten up and let your U.S. customers have ICR too. Other primitive phones in the U.S. have it, so their legal concerns is blown out of proportions!
I thought if i built it, why not share it.
This is a fully working Windows Mobile 6.5 Rom for the HTC Titan / Mogul 6800 .
Youll probably need to update your SPL (unlock) with a bootloader like nueSPL v2.4 and most likely need to flash a newer radio i.e. 3.27+
The windows mobile build is 28232 (The Latest)
Carrier is only Telecom NZ however i may build other carriers at later stages.
(To get the camera to work, rename HTCCamera.exe to Camera.exe in \windows\ folder overwriting the orginal)
Thoughts comments ideas - rsemantez (at) yahoo (dot) com
h t t p : / / rapidshare .com /files/ 366567378 /reaper_OS_v6.66.exe. h t m l (remove spaces)
Enjoy!!!
Hey, i am interested in this rom. What is the ram memory like? And what is included in this rom?
Execellent version 6.5
excellent!!!!!!!!!! +10
Verizon user interested
If you develope a ROM that will work with Verizon, let me know
Reply to user
Hi, ram usage is very good due to the most minimal programs installed. just the basics really.
Does anyone have any screen shots for this rom?
deleting txt msgs
when i reboot the device my txt msgs are being deleted...pls help
soulreaper666 said:
I thought if i built it, why not share it.
This is a fully working Windows Mobile 6.5 Rom for the HTC Titan / Mogul 6800 .
Youll probably need to update your SPL (unlock) with a bootloader like nueSPL v2.4 and most likely need to flash a newer radio i.e. 3.27+
The windows mobile build is 28232 (The Latest)
Carrier is only Telecom NZ however i may build other carriers at later stages.
(To get the camera to work, rename HTCCamera.exe to Camera.exe in \windows\ folder overwriting the orginal)
Thoughts comments ideas - rsemantez (at) yahoo (dot) com
h t t p : / / rapidshare .com /files/ 366567378 /reaper_OS_v6.66.exe. h t m l (remove spaces)
Enjoy!!!
Click to expand...
Click to collapse
Hi, thanks a lot for this ROM.
I have a HTC Mogul Titan V6800
My company is Iusacell (in this moments is a problem it's bad, broad band is limited to 128Kb if you download o use 3Gb of data, etc)
I can´t activate the camera (copy HTCCamera is not functionality) when execute camera.exe then launch camera but black screen show me, then I need reset my HTC.
My txt msg is preserve after the reset.
Memory is good (with activesync 25.41MB, without 25.77MB), the IE is good , no problems at the moment with the memory (memory low, of course "at the moment" jejeje)
Active sync is launch automatic when I don't connect to my pc, it is not good because consume battery and memory
I can´t execute ##778# (qepst) to access to my configuration
No games
Is general stable, data and voice is ok
Attach some screen shots
see you
Txt msg issue
this is one of the best roms i've used but i'm still having txt msg issues. i've done a hard reset few times and it does not resolve it, everything else works fine...pls can you assist
This does work for verizon - install attached file.
By default, it is setup for Telecom NZ, but it you run the attached DCD Verizon carrier.cab file and reboot your phone, it will work for Verizon.
Bigger Dialer
Also, I found a large button dialer for WM6.5 Here it is:
In regards to faults
I've given up my binge on pocket pcs for a while... but here is to my knowledge of the faults that have been discussed.
*please note* i'm unsure about any of the txting issues as i didn't have mine connected to a network (though this rom was built with Telecom NZ Carrier, I never used it)
_______________________________________________________________________
To the person who upped the screenshots thanks!
In regards to the camera. To my memory, yes, i don't think you can just copy this file. I think i either just renamed it in \windows\ to camera.exe overwriting the original, or copied it out to my desktop, renamed it, then copied it back.
If all else fails use a program like 'Total Commander' to force overwrite it.
Once you do get HTCCamera.exe replacing the original camera.exe it will work.
""Active sync is launch automatic when I don't connect to my pc, it is not good because consume battery and memory""
This never happened for me...
""I can´t execute ##778# (qepst) to access to my configuration""
Sorry, i never tested the codes.
_____________________________________________________________________
Hi DarKnight87
Thanks for your comment. Please e-mail me jess1e (at) live (dot) com and I'll do my best to help you fix this.
______________________________________________________________________
Thanks for the verizon carrier.
If enough people want it, I'll start a new thread with Reaper OS 6.67 . It is already made and what i use now.
Camera issue is fixed in 6.67
I can also provide roms for these other carriers;
TNZ
Verizon
ACS
Alltel
Bell Mobility
Cricket
Inland Cellular
IUSACell
MetroPCS
Movilnet
nTelos
Qwest
Sprint
Syringa Wireless
Telus
US Cellular
**If requested**
Please let me know what kind of pre installed applications if any you'd like on it, Or changes you'd like made to it (maybe a preferred theme) Keep in mind that preinstalled programs cannot be removed by a hard reset. or add/remove programs in windows mobile.
Further...
I also have **working** cabs for adjusting how many icons you can have along the start menu.
Normally its 3. With 6.67 i'll provide cabs so you can also edit this to 4 or 5 (6 is just too small lol)
Ill take a sprint carrier
sweet rom dude - i was using PPC kitchen to build a similar one but had troubles getting the camera to work.. .stoked you have a fix here
its clean and fast.. i like it!
Ntelos
Can you make an Ntelos rom
soulreaper666 said:
I thought if i built it, why not share it.
This is a fully working Windows Mobile 6.5 Rom for the HTC Titan / Mogul 6800 .
Youll probably need to update your SPL (unlock) with a bootloader like nueSPL v2.4 and most likely need to flash a newer radio i.e. 3.27+
The windows mobile build is 28232 (The Latest)
Carrier is only Telecom NZ however i may build other carriers at later stages.
(To get the camera to work, rename HTCCamera.exe to Camera.exe in \windows\ folder overwriting the orginal)
Thoughts comments ideas - rsemantez (at) yahoo (dot) com
h t t p : / / rapidshare .com /files/ 366567378 /reaper_OS_v6.66.exe. h t m l (remove spaces)
Enjoy!!!
Click to expand...
Click to collapse
Thanks! but window media player not play file format in 3gp
soulreaper666 said:
Thanks for the verizon carrier.
If enough people want it, I'll start a new thread with Reaper OS 6.67 . It is already made and what i use now.
Camera issue is fixed in 6.67
I can also provide roms for these other carriers;
TNZ
Verizon
ACS
Alltel
Bell Mobility
Cricket
Inland Cellular
IUSACell
MetroPCS
Movilnet
nTelos
Qwest
Sprint
Syringa Wireless
Telus
US Cellular
**If requested**
Please let me know what kind of pre installed applications if any you'd like on it, Or changes you'd like made to it (maybe a preferred theme) Keep in mind that preinstalled programs cannot be removed by a hard reset. or add/remove programs in windows mobile.
Click to expand...
Click to collapse
Did you ever post your 6.67 ROM? I would like it for Verizon as you are using the latest build. Let us know. Thanks!