I thought if i built it, why not share it.
This is a fully working Windows Mobile 6.5 Rom for the HTC Titan / Mogul 6800 .
Youll probably need to update your SPL (unlock) with a bootloader like nueSPL v2.4 and most likely need to flash a newer radio i.e. 3.27+
The windows mobile build is 28232 (The Latest)
Carrier is only Telecom NZ however i may build other carriers at later stages.
(To get the camera to work, rename HTCCamera.exe to Camera.exe in \windows\ folder overwriting the orginal)
Thoughts comments ideas - rsemantez (at) yahoo (dot) com
h t t p : / / rapidshare .com /files/ 366567378 /reaper_OS_v6.66.exe. h t m l (remove spaces)
Enjoy!!!
Hey, i am interested in this rom. What is the ram memory like? And what is included in this rom?
Execellent version 6.5
excellent!!!!!!!!!! +10
Verizon user interested
If you develope a ROM that will work with Verizon, let me know
Reply to user
Hi, ram usage is very good due to the most minimal programs installed. just the basics really.
Does anyone have any screen shots for this rom?
deleting txt msgs
when i reboot the device my txt msgs are being deleted...pls help
soulreaper666 said:
I thought if i built it, why not share it.
This is a fully working Windows Mobile 6.5 Rom for the HTC Titan / Mogul 6800 .
Youll probably need to update your SPL (unlock) with a bootloader like nueSPL v2.4 and most likely need to flash a newer radio i.e. 3.27+
The windows mobile build is 28232 (The Latest)
Carrier is only Telecom NZ however i may build other carriers at later stages.
(To get the camera to work, rename HTCCamera.exe to Camera.exe in \windows\ folder overwriting the orginal)
Thoughts comments ideas - rsemantez (at) yahoo (dot) com
h t t p : / / rapidshare .com /files/ 366567378 /reaper_OS_v6.66.exe. h t m l (remove spaces)
Enjoy!!!
Click to expand...
Click to collapse
Hi, thanks a lot for this ROM.
I have a HTC Mogul Titan V6800
My company is Iusacell (in this moments is a problem it's bad, broad band is limited to 128Kb if you download o use 3Gb of data, etc)
I can´t activate the camera (copy HTCCamera is not functionality) when execute camera.exe then launch camera but black screen show me, then I need reset my HTC.
My txt msg is preserve after the reset.
Memory is good (with activesync 25.41MB, without 25.77MB), the IE is good , no problems at the moment with the memory (memory low, of course "at the moment" jejeje)
Active sync is launch automatic when I don't connect to my pc, it is not good because consume battery and memory
I can´t execute ##778# (qepst) to access to my configuration
No games
Is general stable, data and voice is ok
Attach some screen shots
see you
Txt msg issue
this is one of the best roms i've used but i'm still having txt msg issues. i've done a hard reset few times and it does not resolve it, everything else works fine...pls can you assist
This does work for verizon - install attached file.
By default, it is setup for Telecom NZ, but it you run the attached DCD Verizon carrier.cab file and reboot your phone, it will work for Verizon.
Bigger Dialer
Also, I found a large button dialer for WM6.5 Here it is:
In regards to faults
I've given up my binge on pocket pcs for a while... but here is to my knowledge of the faults that have been discussed.
*please note* i'm unsure about any of the txting issues as i didn't have mine connected to a network (though this rom was built with Telecom NZ Carrier, I never used it)
_______________________________________________________________________
To the person who upped the screenshots thanks!
In regards to the camera. To my memory, yes, i don't think you can just copy this file. I think i either just renamed it in \windows\ to camera.exe overwriting the original, or copied it out to my desktop, renamed it, then copied it back.
If all else fails use a program like 'Total Commander' to force overwrite it.
Once you do get HTCCamera.exe replacing the original camera.exe it will work.
""Active sync is launch automatic when I don't connect to my pc, it is not good because consume battery and memory""
This never happened for me...
""I can´t execute ##778# (qepst) to access to my configuration""
Sorry, i never tested the codes.
_____________________________________________________________________
Hi DarKnight87
Thanks for your comment. Please e-mail me jess1e (at) live (dot) com and I'll do my best to help you fix this.
______________________________________________________________________
Thanks for the verizon carrier.
If enough people want it, I'll start a new thread with Reaper OS 6.67 . It is already made and what i use now.
Camera issue is fixed in 6.67
I can also provide roms for these other carriers;
TNZ
Verizon
ACS
Alltel
Bell Mobility
Cricket
Inland Cellular
IUSACell
MetroPCS
Movilnet
nTelos
Qwest
Sprint
Syringa Wireless
Telus
US Cellular
**If requested**
Please let me know what kind of pre installed applications if any you'd like on it, Or changes you'd like made to it (maybe a preferred theme) Keep in mind that preinstalled programs cannot be removed by a hard reset. or add/remove programs in windows mobile.
Further...
I also have **working** cabs for adjusting how many icons you can have along the start menu.
Normally its 3. With 6.67 i'll provide cabs so you can also edit this to 4 or 5 (6 is just too small lol)
Ill take a sprint carrier
sweet rom dude - i was using PPC kitchen to build a similar one but had troubles getting the camera to work.. .stoked you have a fix here
its clean and fast.. i like it!
Ntelos
Can you make an Ntelos rom
soulreaper666 said:
I thought if i built it, why not share it.
This is a fully working Windows Mobile 6.5 Rom for the HTC Titan / Mogul 6800 .
Youll probably need to update your SPL (unlock) with a bootloader like nueSPL v2.4 and most likely need to flash a newer radio i.e. 3.27+
The windows mobile build is 28232 (The Latest)
Carrier is only Telecom NZ however i may build other carriers at later stages.
(To get the camera to work, rename HTCCamera.exe to Camera.exe in \windows\ folder overwriting the orginal)
Thoughts comments ideas - rsemantez (at) yahoo (dot) com
h t t p : / / rapidshare .com /files/ 366567378 /reaper_OS_v6.66.exe. h t m l (remove spaces)
Enjoy!!!
Click to expand...
Click to collapse
Thanks! but window media player not play file format in 3gp
soulreaper666 said:
Thanks for the verizon carrier.
If enough people want it, I'll start a new thread with Reaper OS 6.67 . It is already made and what i use now.
Camera issue is fixed in 6.67
I can also provide roms for these other carriers;
TNZ
Verizon
ACS
Alltel
Bell Mobility
Cricket
Inland Cellular
IUSACell
MetroPCS
Movilnet
nTelos
Qwest
Sprint
Syringa Wireless
Telus
US Cellular
**If requested**
Please let me know what kind of pre installed applications if any you'd like on it, Or changes you'd like made to it (maybe a preferred theme) Keep in mind that preinstalled programs cannot be removed by a hard reset. or add/remove programs in windows mobile.
Click to expand...
Click to collapse
Did you ever post your 6.67 ROM? I would like it for Verizon as you are using the latest build. Let us know. Thanks!
Related
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
8-11-2004 20:57 GMT: New version V2 uploaded.
I added a small archive containing the changed ExtROM files to solve the earlier reported errors (not updating ExtROM version and not making IIWPO un-installable).
Comment on IIWPO and making it un-installable: After having customized & installed IIWPO, you will have to do one of the following to make it un-installable if youre using the 1.72.902 ExtROM:
a. Another hard-reset
b. Running Version_172_902.cab from the ExtROM
NOTE: This thread is being replaced by
http://forum.xda-developers.com/viewtopic.php?p=68652#68652
Thank You!!!!!!!!!!!!
I am d/l'ing right now and will be installing shortly...
One request... You might want to include the cab for setting up IIWPO in case someone is installing it into the phone.
edsub Thanks.
Question tho. Can I use this for T-Mobile USA and does it fix the MMS problem ?
asking because the version says NL, isnt that the Netherlands country code ?
Thanks again
Well from first look everything seemed ok.
THese are a few of the things I have noticed since loading.
1. The ext rom version # doesn't show up in the info
2. If you use the IIWPO then it still shows in the remove list
3. The new apps from the 187 version will not install no matter what you do. (I have tried adding the ver # in the Reg, both 902, and 187 (not at same time)) Niether worked.
These are the few things that I have found since loading. If I find any more I will loet you know. Other than these I think you havea winner here!
I was wondering about the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 packages, and why you didn't include or update to them? Was there some incompatibality issue?
Thanks and great job!
Re: Home-cooked 1.72.902 upgrade package (1.72.00/1.17.00) T
edsub said:
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
Click to expand...
Click to collapse
Is SRS included?
SRS is not included due to the fact that I don't see any use for it personally. Since it is an ExtROM installer, you could add it yourself.
The NL is only there because some sdetting are more or less specific to the Netherlands. I had feedback on my earlier 1.72.901 package that it worked for other countries (incl USA) as well. Be prepared that the date format will be dutch by default (easy to change via settings though).
Also MMS is suposed to be working (but I have not tried it due to lack of interest in MMS)
The ExtRom# is not showing because some bug in the Version_172_902.cab. Working on that now.
IIWPO not showing in the remove programs list is a bit more difficult than it seems if you install for the first time. Normally you would boot up the device with new rom. IIWPO is NOT installed at this point. Once you have customised & installed IIWPO, you will have to do ANOTHER hard-reset (ie run the ExtRom contents again) to disable the uninstall. You could force this by hand first time to re-run Version_172_902.cab after installing the customised IIWPO. BUT as this cab is not OK, it wont work anyway. Working on that now.
I did not find the time to look into the new O2 apps. If someone finds a solutiuon here, I am more than happy to includew it in a new version.
For the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 the basic reason is lack of time. I dont know what 'extra' new there is on bluetooth in the O2 builds? OS Rom 1.72 allready has an updated BT stack that fixes most open issues. I have no experience (& interest) in MMS / streaming MMS . . .
I suppose the issue with TomTom locking up without GPS enabled is not solved with this rom ?
I know: wishful thinking..........
@Pleun: Nope. I WISH I would have solved that one!!! FYI: I tested he new TomTom GPS 3.07. It doesnt solve any locking issue and next to that makes my Headset react very slow. Also the 'Bluetooth GPS' option that is supposed to solve the locking has gone, at least with my installation. Not advisable. I reverted back to TomTom GPS 3.03.
@all: I solved the issue of not setting the Ext Rom version and making IIWPO non-uninstallable. New version V2 will be up in 10mins (incl. incremental fix for all that downloaded the version from yesterday).
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
edsub said:
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
Click to expand...
Click to collapse
I feel like my MDA2 is a little bit slower to respond not sure why! I added PocketMVP, Belkin Bluetooth GPS, Resco Explorer 2003 V5.0 and .NET Compact Framework 1.0 SP2 for Pocket PC 2003.
I am having problem with Belkin BT GPS; I got it to bond, detect the COM port (COM5) and baud rate(4800) to use but my MDA2 hangs up and had to soft reset. Any idea why?
I will try to install one by one and see what's causing it and report here.
edsub thanx for me it works great its a great improvement!
machine seems faster and no more lock-ups.
Keep up the good work (ill be following you)
p.s only one thing my battery seems to give me no more than 4 hours of on-time
4 hours is very different from my (and others!) experience. The 1.72 rom should even improve battery life.
My battery lasts for about 1,5 days (not measured but recalled from my memory) with approx 1-1.5 hours on the phone and bluetooth permanently switched on . . .
were can I download this rom from?
from the first msg in this thread : RUU172902WWE_eDsuBsofT V2.exe
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Anonymous said:
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Click to expand...
Click to collapse
You cannot download it as a guest! If you are a member of this forum you have to log-in before you can see the file you want to download. That's what I encountered before so just try logging in first.
Good luck!
THank you very much superperry. Should have registered before but was always too lazy.
I have put together rom upgrade 1.72.903
This thread can be closed. See http://forum.xda-developers.com/viewtopic.php?p=68652#68652 for the new one
Edit: The new upgrade files are now available (see refered post)
An error need help please
I downloaded the files then followed the instruction below but now I get error
the flashing process
first the devicedata is obtained from the device, with HimaGetDeviceData.exe, this gets the operatorname, and language/country code from the extended rom, sector 2 of the BDK.
Then a tool 'HimaClearJumpCode' is executed, which erases the jump at the start of the kernel. causing the bootloader to start at next reboot.
the upgrade tool then connects to the bootloader of the xda, via serial over usb. ( port \\.\WCEUSBSH001 )
warning do not just run the 'HimaClearJumpCode' program, it will erase part of your OS rom, after which you will have to repair your device by running an entire upgrade again.
First I appologize for the delay in the availability of this ROM. I was out of town on some business, and the site was down again for a certain time.
To get down to the details, this ROM is the complete set of all three .nbf files, I chose the 2.06 NK.nbf because the cleartype fonts are way better than the 2.02. The radio stack included is version 1.18, and the extended ROM (ms_.nbf) is a customized 2.06.100a, which is a mixture of the extended ROM that dcs posted, the one that came with the 2.06 ROM from the mystery guy and the official Asian 1.60.44 ROM.
I had to remove a couple of the Asian telco provider settings because there was no more space left in the extended ROM since the new versions of the software had larger file sizes than before, and the AutoConfig for Asian telcos alone takes up a lot of space too.
I still included the Extended ROM Viewer and almost all of the newer versions of the software included in the extended ROMs posted by dcs and the mystery guy.
The following telco providers were removed (due to their file sizes being the largest):
1. 1010
2. One2Free
The Socket SDIO Wi-Fi that were available in the previous ROM I posted were also removed due to the lack of space, the SPB GPRS Monitor that was provided as part of one of the extended ROMs posted was also removed. The thumbpad driver is in the extended ROM but does not auto-install, since some times it causes problems, you may install it separately by just clicking on the cab file.
The files removed are included in the .ZIP file so that they may be installed separately if desired.
I would like to thank dcs,mamaich, the mystery man and all other developers who contributed to this endeavor.
RE
Hi ZeroXtreme!
Thank you very much!
Could you post the breakdown of the content here?
Thank you again
Nice work ZeroXtreme
ZeroExtreme is my hero !
Customized ROM Content
NK.nbf = 2.06 (Mystery Man)
Radio_.nbf = 1.18 (dcs)
ms_.nbf = 2.06.100a (Mixed with dcs ms_.nbf, Mystery Man ROM and official Asian 1.60.44)
Extended ROM Contents:
CameraRC141_WWE.sa.CAB
MIDI561.sa.CAB
CprogHook.WM2003_2577.CAB
LoadDialogInit_MS_10150402.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
Caller_ID_WWE_RC10.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Version_OU.sa.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
Extended_ROM_viewer.CAB
sales_service.CAB
hk_html.CAB
BTPSKeyUpdate_003.exe
Autoconfig.txt
Autoconfig.exe
Autoconfig.exe
TPDisable.exe
TPEnable.exe
Also all of the Asian telco settings except the ones listed in the first post that were removed.
it'a Chinese version or English version?
cool thak a lots
Version
vbexpert said:
it'a Chinese version or English version?
Click to expand...
Click to collapse
Its an english version all the way.
Problem...
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Re: Problem...
RaNmA_ said:
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Click to expand...
Click to collapse
I am not too clear about the problem, you flashed your device with the ROM I posted?
This did not happen to me during the multiple times I flashed my device and my dad's device.
I am a bit puzzled here, can anyone help in this matter? ANy similar experiences?
It's so difficult to download! :? I must have tried at least 6 to 7 times. Each time it just stop there.
hi people, i m new to this forum and new to xda2. Just wondering, how do u guys download and load up all the upgrades? hope u pros can give me some pointers.... thanks in advance
Finally managed to download the file. Do I need to do anything before installing the new ROM?
I had once tried to upgrade my unit (blame it on initial enthusiasm, I'd seen all these talks about upgrading to newer ROM versions everywhere on the net that I downloaded an upgrade 2 weeks before I actually bought my device) with a ROM version I had downloaded from O2's UK (The unit was bought from singapore/Honkgkong...Asia ROM presumably)site which naturally and the consequenses were very depressing , I was left with a dead machine on my hands and nobody I knew could be of any help. Anyway that had been taken care of a couple of days back when it reflashed at an authorised service centre.
Well that being that , now that its working fine and now that I see all this talk about windows mobile 2003 SE here I have this irresistable urge to try upgrading mu unit to run SE.
A couple of things before I try to get adventurous
1)How do I do a backup of of EVERYTHING ON MY MACHINE ( Original BASIC/Just out of the box/First time run software included ) So that I don't have to take a week off work just to get the unit reflashed.
2) How do I do a restore all of the backed up data on my device if the 2003SE upgrade doesnt work? From what I have learnt , it isnt anything like a regular computer where just about anyone can format boot and reload windows if it crashes.
I figure a dead PPC is like a regular computer with a dead bios.
I can understand that this post is about 5 times the length of a usual post here but I just had to get all my backup plans in place before I jump off a cliff.
you can use either the x-backup in the xda itself and making a complete back up to your sd or mmc card or make a backup via active sync on the tools menu
where is the download link??
Anonymous said:
where is the download link??
Click to expand...
Click to collapse
You have to log in to see the download link :wink:
I have an xda II australian model, i want windows media player 10, can i use the chinese rom??
This is gonna be my first time to update the ROM of my device so some questions:
Did you include upgrade instructions on the zip?
How do I disable some of the .cab files on the extended rom? I dont like some of them.
Had any probs with this rom on Globe?
~ishtangli
What's the BT software on the new rom? Widcomm or MS?
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
diceman725 said:
Need some advice folks. Currently on an assignment in Australia and have just upgraded my Cingular 8125 to a Dopod 838 Pro. I'm with Telstra. Problem is any time I reboot the phone, the Network Wizard executes and errors out. Fine. I manually load Network settings but then i find out a couple of hours later that my manual settings have just disappeared.
I've scoured this site and see that I can do a variety of things, including loading the latest JasJam ROM. Regardless, whats the issue and short of doing a ROM upgrade (did plenty on my 8125, so it doesnt frighten me) what can i do?
Please advise.
Click to expand...
Click to collapse
Theres a file on DopodAsia's wedsite for Tesltra users, it enables newer settings. You put it in your MyDocs folder on the Dopod, and basically boot up. It uses the file, updates Network Wizard and will work properly. Its due to Tesltra's codes changing and the launch of NextG.
GL
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
jac33au said:
You wont be able to get these files unless you have a dopod serial to register with. I would suggest maybe you flash the newest telstra rom instead of the 838
Click to expand...
Click to collapse
you can download the latest Imate ROM from their website which fixes your problem
hmmm weird. try again with attachment for cab file for telstra.
installs other stuff so beware like a proxy changes ie default and wap. all can be undone but gives u ur settings.
just saw this...
after my last post maybe helps u
http://forum.xda-developers.com/showthread.php?t=284812
it is ur device and australia specific.
Thanks folks for so many rapid responses... I was able to get the Network Wizard "fix" from Dopod's Australian service center yesterday. Unfortunately, I purchased the phone from ebay and the previous owner had already registered the serial number, so it's not letting me re-register. I've called Dopod directly to proces my registration, but they've not called me back yet.
simon_darley: will that .cab file set all the required settings on WM6? (I am considering upgrading to WM6, and a Cab file with all the Telstra settings would be nice and easy)
Does it add any of the Telstra software?
telstra aust cabs
the previous cab was the old one from the original rom released when the phone was sold and was incomplete so far as mms and other settings.
attached here is the latest from a new imate rom compulsory for telstra users and in conjunction with telstra proposed phone/data upgrade of their system should work more effectively.
i also use the telstra recommended imate radio upgrade 1.38.30.1 i think it is.
all of which runs perfectly now on wm6 including the wm6 media streaming which imate wm5 requires pvplayer as ms didnt release media streaming until wmK.
so now it works perfectly with foxtel video streaming and in 2 wks should allow simultaneous voice data connectivity which the telstra hw upgrade shouldfix for us.
i also include the my place cab which allows foxtel and videos to stream without using the download mb limits. so if u access foxtel via my place over next g it doesnt count towards the mb usage.
i have all the cabs from the upgrade and post them here for what i used only but in reality u may only need 1 or 2. i have all but installed only 5.
the ext rom in full is on xda dev if u want to download. i dont really know wot the other 3 do so installed and didnt cause any harm.
hmmm something odd nxt post should contain attachments... lost wifi...! bak soon
hmmm truble upload from pda apologies... wifi ... trying again
simon_darley said:
hmmm truble upload from pda apologies... wifi ... trying again
Default_Imate_AUS_HR_V3.30.00.cab (84.9 KB, 2 views)
Click to expand...
Click to collapse
Sorry, I didn't catch what this cab does for the JasJam.
I understand what the other two are for, but this one above I'd like to know before I install it.
Thanks.
dunno wot its 4. caused no harm 4 me.
Here I have a bunch of boring ROMs for your StarTrek. I call them boring because they are devoid of any personalization, customization, or 3rd party apps other than what comes with a shipping ROM. These ROMs are OS only, will not change your initial splash or radio (but it does change the operator splash). A text file ReadMe.txt in the download contains brief instructions on how to flash this ROM. Apparently the 3.06 IPL/SPL in QTEK ROMs is broken and cannot recover via MicroSD so I would recommend updating to 4.01.0001 prior to flashing any of these ROMs, although that in itself can be risky (see below for download). Enjoy, and flash at your own risk!
Details
5.2.1711 (Build 18170.0.5.1) Core OS (SYS) is ported from T-Mobile Shadow Feb. '08 update.
OEMAPPS and OEMOPERATORS are straight from CWS 4.1.502.5 ROM. It has the latest camera and apps.
OEMDrivers specific to StarTrek are the latest, from 4.1.502.5 ROM. Some common libraries are from TMO Shadow ROM.
OEM Edition for AT&T 3125 - The same old, boring, Cingular-branded ROM you're used to, only ported to WM6. My objective with the Boring Edition is a ROM that's indistinguishable from what an OEM would put on a shipping device. This is based on Cingular ROM v4.1.502.5 with many changes made throughout to work with the WM6 core, but hopefully the changes are transparent. It comes with all the bloatware and apps that came with the original Cingular ROM. If you want lots of storage and free RAM, this is NOT the ROM for you!
Adobe Reader LE 2.0 (new, from TMO Shadow, replaces original ClearVue PDF)
Office Mobile (new, replaces original ClearVue Office suite)
Windows Live/Live Messenger (new, replaces original MSN Messenger)
Microsoft Voice Command (replaces Cyberon Voice Dial)
English-only xT9 (new, from HTC S730 "Wings", dated Sep 7, 2007, replaces older T9)
Esmertek Java (new, from TMO Shadow update, replaces discontinued Tao Intent Java)
Cingular bloatware, customization, setup, and theme
Clock/carrier block of Cingular theme changed to standard WM6 style (I liked the bigger clock).
SecurityOff (required, because some apps can't install with it on)
Clean ROM WM6 - Similar to the above (same drivers), but lacking Cingular customization and bloatware. Does NOT have Microsoft Office or Adobe Reader. This will leave more storage available for 64MB devices like QTEK 8500 or iMate Smartflip. As this is an unbranded ROM, you will need to manually set up your GPRS and Proxy connections.
Windows Live/Live Messenger (new)
English-only xT9 (dated Sep 7, 2007)
Esmertec Java
Cyberon Voice Dial
SecurityOff (required, because some apps can't install with it on)
Neo Edition Clean WM6 ROM - Same as above, only added Neo theme from the T-Mobile Shadow. No other customizations.
CREDITS
Thanks to pArtizAn (Erofich), Alex[DFR], Strik3r, and Chymmylt for use of the WM6 XIP in early versions of my ROMs. Without it, my first ROM would have been delayed 2-3 weeks.
Known Bugs - Applies to all versions.
Analog Clock 2 and Analog Clock 3 on external display don't look right. NOT a WM6 bug because the original Cingular WM5 has the same problem!
Possible xT9 can't backspace on some websites bug.
Roll your own! Here are the SYS, OEM, and ROM folders for the Clean Edition ROM. Add this to your favorite kitchen. RUU included.
For experienced ROM builders only!
Download Clean Edition Kitchen files
Other Updates
These are from the latest Cingular ROM, newest for STARTREK that I'm aware of. I have tested these and they worked fine on my phone but I am not responsible if you take the risk and they damage your phone! Flash at your own risk!
Download IPL/SPL 4.01.0001 CAUTION: Flashing IPL and SPL could kill your phone... permanently!
Download Radio 4.1.13.34_02.79.30
Download Radio 4.1.13.46_02.97.90
Prerequisites
Your device must be CID unlocked! See this thread.
Please report any bugs with a detailed explanation of how to reproduce them.
Change Log
Mar 6, 2008 - OEM version, single press of RECORD button activates Voice Command. Should support BT activation now. All clean versions now use the same animated HTC splash. Shows HTC logo on outside screen instead of blank (thanks Erofich). I figured how to port XIPs so all ROMs now use my own XIPs ported from scratch. Added Neo and WM6.1 editions.
Feb 21, 2008 - Fixed Vibrate in Profiles bug, possibly fixed Microsoft Live can't connect bug, updated some files (no longer have to press OK after cold boot setup), newer OS build (18170.0.5.1), newer Esmertec Java, Sim Manager, changed Cyberon Voice Dial to MS Voice Command on Boring version.
Feb 18, 2008 - Changed Tao Intent Java to Esmertec Java, T9 to xT9 on all versions. Added download links to latest radio and IPL/SPL.
Feb 16, 2008 - Added kitchen files for Clean Edition.
Feb 15, 2008 - Added Clean Edition. Changes to Boring Edition: T9 problem fixed, Start menu now allows scrolling (no need to press More), SecurityOff to fix programs can't install problem.
Feb 13, 2008 - Original Release of Boring ROM.
Click to expand...
Click to collapse
Extras
Clean ROM a little too clean? Here are some add-ons in CAB form.
Adobe Reader LE 2.0 Build 288531 (from T-Mobile Shadow)
Neo Black & Blue Theme - Only works on ROMs with Neo integrated. Not just a simple color change, I tried to copy the mockup of T-Mobile Black. It looks almost identical to the mockup on my PC, but unfortunately the conversion from 16.7m to 65k colors results in some false contouring.
thanks man!!
does gprs work in this one?
GnatGoSplat said:
Boring ROM WM6 Cingular (AT&T) - It's the same old, boring, Cingular-branded ROM you're used to, only ported to WM6. My objective with the Boring ROMs is to make a ROM that's indistinguishable from what an OEM would put on a shipping device. This is based on Cingular ROM v4.1.502.5 with many changes made throughout to work with the WM6 core, but hopefully the changes are transparent. It comes with all the bloatware and apps that came with the original Cingular ROM. If you want lots of storage and free RAM, this is NOT the ROM for you!
XIP is thanks to Erofich's WM6.
5.2.1711 (Build 18165.0.5.0) Core OS (SYS) is ported from T-Mobile Shadow.
OEMAPPS and OEMOPERATORS are straight from CWS 4.1.502.5 ROM. It has the latest camera and apps.
OEMDrivers specific to StarTrek are the latest, from 4.1.502.5 ROM. Some common libraries are from TMO Shadow ROM.
Changes
Behind-the-scenes changes were numerous, but visible changes are minimal (although I did make a few):
Office Mobile replaces ClearVue apps. Most devices that used ClearVue in WM5 were changed to Office Mobile in WM6 so monkey see, monkey do.
Adobe Reader LE 2.0 from TMO Shadow replaces ClearVue PDF.
Clock/carrier block of Cingular theme changed to standard WM6 style (I liked the bigger clock).
Known Bugs
Analog Clock 2 and Analog Clock 3 on external display don't look right. NOT a WM6 bug because the original Cingular WM5 has the same problem!
OS only, will not change your initial splash or radio (but it does change the operator splash).
Download
Please report any bugs with a detailed explanation of how to reproduce them.
If there is much interest, I can make a cleaner, unbranded version of this ROM or a vanilla kitchen.
Click to expand...
Click to collapse
Will this work on i-mate SmarkFlip (out of box device without any hacks)
Yes, GPRS works, but I use T-Mobile so I had to add a connection to T-Mobile GPRS. It should work with Cingular/AT&T as-is.
It should work on a SmartFlip, but I'm not sure if you need to CID unlock first.
Downloading and installed...
Attempt 1: Read everything within the Word file. Installed right from the RomUpdate program in the root directory of your
WM6 update. Didn't work, so I will attempt what you have in the Readme text file in my next attempt....
Attempt 2: The Update Utility program says version 3.12.3.1 on the title while the pictures you have in the word file says
version 2.99. Also, when I go through to update ROM, it verifies my current Image version as 4.1.502.5,
I click Update and the next screen it indicates that it will be updating from my current version to the
new version of 1.00.000.0. Then, a minute or so later, I get the following message:
ERROR [270] : UPDATE ERROR Image file is corruprted. Please check your Update Utility.
Do you know how I could resolve this matter because you do not list error 270
within your troubleshooting material? Your UpDate program is not even the same version!
Vista Home, Cingular 3125 unlocked with current released Rom version. So, what am I missing here?
Sorry, I shouldn't have included the Word doc, it's the standard doc that came with the RUU and happened to be in the folder at the time.
Are you using SoftSPL? You MUST use the SoftSPL, it won't work to just run the RUU. The doc I wrote is ReadMeWM6.txt.
You also need to CID unlock according to the sticky thread.
kumar00455 said:
Will this work on i-mate SmarkFlip (out of box device without any hacks)
Click to expand...
Click to collapse
@kumar00455,
GnatGoSplat noted that this should work on any StarTrek, but there is something you should be aware of. In the past, it seems like a lot of people that have tried a Cingular ROM on a StarTrek that is not a 3125 model have not liked it, because they ended up with too little storage memory. This is because Cingular has loaded a ton of large crapware programs on their ROMs. Now, that isn't a big problem for the 3125, because it is actually different hardware from all other StarTreks - it has double the storage memory (128MB) all the other StarTreks (which have 64MB). Since GnatGoSplat has tried to make this just like a Cingular ROM, with all the added programs, you may find you have the same problem. However, I do think there is a thread here somewhere that talks about how to clean all the crapware off of a Cingular 3125 ROM and reclaim some storage memory.
@GnatGoSplat,
Thanks for putting this together - I think I will try it soon on my 3125! I would be very interested in a cleaned-up version and a kitchen as well. And of course, many thanks to Erofich and everyone else who worked on getting WM6 on the StarTrek. I thought we would never see this day!
Oh yeah, I forgot the 3125's have double the storage memory!
I'll make a slimmer, cleaner ROM as soon as enough people have tried this one to confirm it doesn't have any significant problems.
What apps are essential to keep in a cleaner ROM and which can go? What are typical apps that come on a Smartflip or 8500?
device PIN lock working?
Can anyone who has tried this ROM tell me if the security PIN lock works correctly without any problems? I sync my 3125 with my corporate Exchange server, and our IT people enforce a device PIN lock requirement through the Exchange server. So I have to enter a 6 digit PIN if the phone has been idle over an hour. Anyway, I'm interested in flashing this ROM, but if there is any problem with that functionality in this ROM, it would be a deal-killer for me... Thanx...
GnatGoSplat said:
Oh yeah, I forgot the 3125's have double the storage memory!
Click to expand...
Click to collapse
I do like your approach here, though. Start with something as much like the carrier ROM as possible until you know that it's pretty stable, then put it on a nice diet to make it lean and mean. Makes good sense to me...
GnatGoSplat:
i am in china. so i download this file so slow,can you send to me ?my e-mail:[email protected]
SoftSPL
Ok I'm where do i put the SoftSPL file and how do i use it. i tried putting it in Windows directory nothing. please help i really want to get WM6 on my 3125
guyver76 said:
Ok I'm where do i put the SoftSPL file and how do i use it. i tried putting it in Windows directory nothing. please help i really want to get WM6 on my 3125
Click to expand...
Click to collapse
Put it in the root of your device /not/ Windows. Start softspl.lnk as it says in the manual
I tried to use the program you directed the user to transfer. Everytime I clicked on it, I would get an error which stated that the link's program could not be found.
Don't get me wrong over here, I read the directions a few times and did everything you instructed. I am pretty good with directions and I am not one for doing things my own way. If I could help in anyway, just say something. I have alot of times on my hands and I am educated in matters, like, programming on my home desktop.
I made several attempts, I still get the same error, time and time again.
Are you trying to run the correct SPL? The one that looks like a square with a blue bar on top is the correct one. The one that looks like a piece of paper with the corner folded and a Microsoft icon in the center is NOT the right one.
Also, copy ONLY the files and NOT the whole folder. All these files need to be on ROOT folder of your device. If you're using ActiveSync, when you open your device icon, it defaults to My Documents so you have to go to My Device.
Okay, there we go. I copied the entire folder. Sorry. :O(
I'll make a new attempt in just a few.
UPDATE: I tried it, and now instead of an error, it just doesn't do anything. Sorry.
GnatGoSplat -
Thanks man, this ROM has been perfect so far. Just like my previous cingular rom with WM5. You did a superb job. This is just what I was looking for. Thanks Again!
I am waiting for the slimmer ROM since my device is teh European QTEK 8500. I am waiting impatiently
Churchill said:
I am waiting for the slimmer ROM since my device is teh European QTEK 8500. I am waiting impatiently
Click to expand...
Click to collapse
Its worth the wait!!
Thanks
Thanks for the reply i got it working now
This kitchen is based on sprint 3.35 release
NOTE:This is an os rom. radio 3.35 and olipro 2.40 unlocker required.
Features:
* Only 57 mb, includes all tools and everything.
* Very easy to cook. just run buildflash.bat and follow instructions.
* Clean
oem folder has been cleaned, windows live and some other stuff is removed from sys, Every program has its own folder. if you want it to be cleaner just delete related folders from sys folder.
* Adjusted security policies
* based on original sprint release. It is not a remixed version. Almost everthing extracted from original sprint rom, including xip, sys, oem drivers etc.
* Fixed PIE, not freezing anymore.
I have spent lots of time on it and have adjusted lots of stuff that i cant remember.
I have learnt most of stuff from xda-developers.com, ppcgeeks.com, howardforums.com , no2chem and dcd and they are source of some of the packages i have included. So thank you all.
It would not be possible without the wonderfull kitchen tools either.
So please thank them also if you like this kitchen.
Instructions: Just run buildflash.bat and follow instructions.
http://www.megaupload.com/?d=JMST2UF9
March 30 UPDate:
http://rapidshare.com/files/103708242/a1kitchen.zip.html
Disabled extended rom , added some more oem's such as telus mobile email, metrix, x button etc, fixed sprint epst
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Sopranokam said:
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Click to expand...
Click to collapse
Link is working now.
Yes gps is working, tested with tomtom, windows live and google maps.
No no problems with DST, alarms etc.
Yes stock dialer is OEM'ed.
Link not working?
The file you are trying to access is temporarily unavailable.
etexter said:
The file you are trying to access is temporarily unavailable.
Click to expand...
Click to collapse
Ignore. I got it from megaupload finally.
Thanks for the perfect kitchen...
No bugs, fast, easy to customize and no attempt to install bleeding edge updates!!! This is exactly what I was looking for.
Thanks again!!!
my experience.
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
artiss said:
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
Click to expand...
Click to collapse
That is weird. You might want to try without any add-ons and reprogram your phone via *22803 using option 1 and then option 2 to update prl.
I have flashed 5-6 phones ... have not had single problem in last three weeks.
No body else has complained at ppc or xda yet. Since not even one other person is having same issue, I am guessing it’s not a bug; it’s just your settings.
If you can help me with duplicating the problem on my phone, i probably can fix it.
Tomtom issue is not rom related. Tomtom maps should be stored in folder in the root directory of sd card.
Sure what info would you like to know? I performed the following:
- Installed the Olipro 2.40 unlocker
- Flashed with Sprint Rom 3.35 latest
- Used the buildflash.bat on a windows box to create my install
- Installed the created rom
- Performed a *22803 with option 1 & 2
- Checked with Telus that I do infact have a data plan
- When I connect to the internet either through Opera or IE I get this message "Cannot connect for an unkown reason blah blah please check settings"
Now I have tried with a username & password (esn dec) with no luck. Now with my ignorance I have misplaced the data I wrote down on MSID, NAI, DUN, etc numbers so I have no way of verifiying that data. Now when I installed the sprint rom it started the install its extra stuff after an accidental power cycle - did that fubar stuff? Should I of relocked my phone, reinstall telus, then re-unlock and perform the above steps?
So with tomtom the maps are in the root of the SD? In a dir? Do I have to edit the currentmap.dat file?
Thanks for the quick reply and help - what other info do you want
from here
http://rapidshare.com/files/103173398/Erase_Extended_Rom.zip.html
flash the attached rom ( it includes flashing utility) . it will erase sprint stuff you have in extended rom.. that should fix data problem
tomtom maps should be \\storage_card\usa and canada maps
no need to edit any files
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
artiss said:
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
Click to expand...
Click to collapse
i have followed the steps you lave listed, still i am unable to duplicate the problem.
may be flash telus oem, get data working and then copy every single epst setting before you reflash.
inorder to flash telus oem you will need relocker from ppc site.
EDIT: seems like internet problems are related to sprint customization..
http://forum.xda-developers.com/showthread.php?t=380820
Cant get to epst on sprint either
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
a1jatt said:
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
Click to expand...
Click to collapse
It dont work either way...codes or windows folder!
How to reinstall
On the Kitchen we have a folder named OEM with some program on it
how is possible to reinstall that progral like "HTC_CommManager_Titan"
Thank You
Alain
NotLutzik said:
It dont work either way...codes or windows folder!
Click to expand...
Click to collapse
here is the fix.
http://rapidshare.com/files/103708242/a1kitchen.zip.html