Related
edit: as a result of a few people possibly bricking their devices, i have removed the standalone radio update.
at this time the best method of obtaining radio 3.35.04 is to flash the entire sprint 3.35 rom update.
Whoa. What are changes?
will this work on a Verizon one? or is it just Sprint?
DCD,
Getting an error on installation. RUU hangs at 9% then gives me Error[328] INvalid command, The update utility cannot be used for your PDA phone. Please check your update utility. I am running Olipro-2.40. Vz user. No issues in the past with upgrading rom or radio. Have been running leaked radio and both yours and No2Chem's roms.
Thoughts
okay so im seeing all kinds of misc threads around about this radio but everything is specific to Sprint...
no one can verify if this works with Verizon?
Anyone even know what the difference in the radio is from 3.27?
please excuse my ignorance, but I just want to make sure that if I'm already running one of your roms (2.3.1) that all I need to do is flash this radio. Is that right, or do I need to reflash the rom as well?
I am also getting the error at 9%. I have tried flashing about 5 times all with the same result.
Downloading the RADIO now... I've got DCD's 2.3.2 (modified a bit) ROM... will report once I get the Radio installed.... I am very excited.
weird, i had dcd 1.7.1 / radio 1.59.10a / spl-1.20-olipro
flash went fine
if you guys keep getting errors ill investigate further
vossco32 said:
I am also getting the error at 9%. I have tried flashing about 5 times all with the same result.
Click to expand...
Click to collapse
So you're just doing the radio and not the main ROM, correct? And are you just launching the updater or manually putting the phone into bootloader mode first?
I have your 2.3.2 release, 3.16 radio, and SPL-2.40.0lipro and I am getting the error. I will try a few more times. I did notice that the led flashes red right after it fails and reboots.
I am doing just the radio, and I have tried it both ways with the phone in bootloader and without.
Yep. Also getting the error here... I'm using DCD 2.3.2 ROM.
Still no luck either, running No2Chem 5049, 3.16 radio and 2.40. Extracted your radio and it is no different on 3 different RUU's, the same for the radio straight from the Sprint release.
rajuabju said:
Yep. Also getting the error here... I'm using DCD 2.3.2 ROM.
Click to expand...
Click to collapse
Me three, on my VZW 6800 with latest DCD and test Radio ROM.
Is the first post saying that I can use the New rom (released today) with olipro 2.40?
Yes I am getting the error at 9% also. Bummer.
dcd1182 said:
weird, i had dcd 1.7.1 / radio 1.59.10a / spl-1.20-olipro
flash went fine
if you guys keep getting errors ill investigate further
Click to expand...
Click to collapse
I flashed from 1.7.0 / radio 1.40 / spl-1.20
did spl 2.40 -> radio -> dcd 2.3.2 rom
no problems... except data is throwing invalid username again.. which is typical after a radio change.. just need to call verizon again
Same on 9%
I am also getting the error at 9%
VZW user with Olipro 2.40 and DCD 2.3.2 ROM
Edit: I have tried from both bootloader and with phone completely booted up.
l33tlinuxh4x0r said:
Is the first post saying that I can use the New rom (released today) with olipro 2.40?
Click to expand...
Click to collapse
No. That's already discussed in the thread on the new ROM (and in the ppcgeeks.com thread on the same topic). Here, we're talking about success (or lack thereof) in flashing just the extracted radio so that it can be used with custom ROMs and/or with non-Sprint phones.
David
Ditto
Thanks dcd, but getting same error at 9%...running NexVisions Hybrid, 2.40 etc.
So here is my situation:
I had a 3.27 radio with a 3.xx rom (one of the DCD roms). I wanted to get the 3.35 radio so i decided to flash to the SPRINT 3.35 rom, to do so i had to relock the phone so i used Titan Re-locker (which may have caused the whole problem) and now I am stuck at the SPL 1.06 screen.
I tried flashing older roms and still no luck.
I am currently with Telus and only flashed the SPRINT 3.35 rom to get the 3.35 radio off it. WHat do i do? I haven't bricked my phone right?
I have tried to flash Sprint 2.09 and SPRINT 2.17 roms and have failed. The bar goes up to 1% and then restarts the phone back to the SPL 1.06 screen for any flashes i try to do.
So here is my situation:
I had a 3.27 radio with a 3.xx rom (one of the DCD roms). I wanted to get the 3.35 radio so i decided to flash to the SPRINT 3.35 rom, to do so i had to relock the phone so i used Titan Re-locker (which may have caused the whole problem) and now I am stuck at the SPL 1.06 screen.
I tried flashing older roms and still no luck.
I am currently with Telus and only flashed the SPRINT 3.35 rom to get the 3.35 radio off it. WHat do i do? I haven't bricked my phone right?
Click to expand...
Click to collapse
Ok there's a WHOLE mess of problems with this post. First of all, if you read correctly in the kitchen thread, radio 3.35.04 is REQUIRED for any 3.x.x rom. 3.27 WILL not work. Second of all, you do not need to relock your phone when installing the 3.35 sprint rom, in fact, that's what caused it to break as the 1.06 bootloader will not flash or boot a 3.35 rom or radio. The only way to fix your problem right now is to flash the stock telus rom and radio using the microsd flashing method. Once that is complete, you need to unlock again with Olipro 2.40, and then run the sprint 3.35 update.
sux 2 B U. I highly doubt it is bt\ricked, you just dont know what U R doing.
This it what I did...
I did not need to relock. I started the sprint update with the phone booted up to the titan in Hard-SPL mode(miltucolor flash screen) . It reboots to the Hard-SPL several times to finish it and may pause several times. I just let it run. Keep an eye on it, it is done when it boots to a regular boot screen. Dont let it finish booting and then manually boot into Hard-SPL (PWR + Camera + reset with stylus) and flash DCD 3.0.4. I did the same process with the alltel update to get 3.37. You will be left with the bootscreens from the Sprint or Altel rom, but booting to DCD rom with 3.37 radio, GPS, exct....
Hi I'm looking for some help. I tried upgrading my XV6800 to the windows 6.5 rom but I think I might of messed up. I tried to update my radio first but ran in to issues.
I used Oilpro 1.20 to try and tried to update the radio but along the way messed up while trying an older rom and I'm currently at a Verizon screen with the message "NO RADIO" at the bottom. I'm assuming the radio rom was erased. I might have gotten confused with the roms and used a rom without the appopriate Radio. When I try to flash that rom back to a stock Verizon upgrade it just ends 11% in to the flashing process and the rom update utility returns a Error 290 screen.
Currently I can get the oilpro 1.20 bootloader to still load up but I'm not sure what to do at this point. I tried updating the ROM to DCD's older 3.20 roms, which did complete but I still have that screen coming up. Can anyone give me some suggestions on what I should do next? Any help would be greatly appreciated.
Try using NueSPL 2.47 it's more current
Doesn't have have to be run on the phone itself once inside Windows? The only screen I can get up is the Verizon (splash) screen where it normally lists the rom and radio, or the oilpro boot loader screen. I actually can't get back in to windows to run the nueSPL 2.40.exe file.
Is there a way for me to flash the radio back from a bootloader screen and USB or SD card? The thing is I actually tried to take the 3.42.40 radio and use the Flash Rom Utility to see if it would flash the radio rom back on but even though the process completes successfully, I still get the no radio error so I guess it doesn't work. Thanks for the help, I think I may have been a few of the idiots out there who screwed things up and didn't make sure the radio was up before attempting any rom upgrade.
You should've changed the bootloader first. Your radios that you are trying are not compatible with your bootloader.
Flash an old stock rom via SD, then update your bootloader to 2.47 once you can get back into windows, then update your radio, and then your rom.
Yeah that was one of the first things I've tried a USB update back to the stock Verizon 6.1 ROM, but for some reason it prematurely ends at 11% with the PDA Phone Update Utility throwing a ERROR 290 message. This is the first time this has happened as I've flashed with this same rom tons of times. I've been looking online for the past hour on how to flash the ROM from a SD card if I can't get in to Windows. But all I could find was the USB update utility and it ends at 11% Am I doing it wrong? any ideas would be greatly appreciated.
If you can still get in the bootloader then you should be fine....I would put it manually in bootloader holding power and camera simultaneously and poke the hole to get it into bootloader.
Once you do that plug in the data cable and run Olipro 2.40 or Nue 2.47. It should be able to take after that.
Basics steps to flashing a phone:
correct unlocker-->stock ROM-->custom ROM
Most custom ROMs will not include Radios that why you would run the stock ROM first to install the radio and then run the custom ROM. Alot simpler then trying to update the Radio by itself.
AWESOME! I got it back up, thanks guys. For reference purposes I'm going to restate the problem and solution incase other noobs run in to the same issue.
PROBLEM:
I installed oilpro 1.2 during the process of installing a new radio then a rom. Along the way the rom install failed. I tried to reinstall a stock Verizon rom RUU 3.57 & 3.37 radio but it failed at 11%. I was then stuck at the splash screen with a message that said NO RADIO. I could still get in to the boot loader with the power and camera button. But the stock Verizon rom did not install anymore.
SOLUTION:
I used titan_exitbl.exe to exit the bootloader and I went back to an earlier rom found here, rom 2.09 & radio 1.30. That one actually installed. It seems to have worked. I'm back in windows now but I need to uninstall oil pro 1.2 and get nuSPL 2.47 on there before I move further (it looks like while it's still on the stock RUU won't work for me).
Do you guys know how I would go about uninstalling Oilpro 1.2? Will Titan_relocker do it for me? I'm not sure if installing nueSPL over oilpro will do it.
Use this ROm from Verizon to get the Stock 6.1 back up and running. It's the MR2 rom
http://www.pcdphones.com/phone_downloads.aspx?bid=89&cid=1&mid=287&carrier=Verizon Wireless
Beyond888 said:
AWESOME! I got it back up, thanks guys. For reference purposes I'm going to restate the problem and solution incase other noobs run in to the same issue.
PROBLEM:
I installed oilpro 1.2 during the process of installing a new radio then a rom. Along the way the rom install failed. I tried to reinstall a stock Verizon rom RUU 3.57 & 3.37 radio but it failed at 11%. I was then stuck at the splash screen with a message that said NO RADIO. I could still get in to the boot loader with the power and camera button. But the stock Verizon rom did not install anymore.
SOLUTION:
I used titan_exitbl.exe to exit the bootloader and I went back to an earlier rom found here, rom 2.09 & radio 1.30. That one actually installed. It seems to have worked. I'm back in windows now but I need to uninstall oil pro 1.2 and get nuSPL 2.47 on there before I move further (it looks like while it's still on the stock RUU won't work for me).
Do you guys know how I would go about uninstalling Oilpro 1.2? Will Titan_relocker do it for me? I'm not sure if installing nueSPL over oilpro will do it.
Use this ROm from Verizon to get the Stock 6.1 back up and running. It's the MR2 rom
http://www.pcdphones.com/phone_downloads.aspx?bid=89&cid=1&mid=287&carrier=Verizon Wireless
Click to expand...
Click to collapse
Glad to hear you got your phone back up
As far as I know you should be able to just install 2.47 and it will overwrite your old bootloader without problems. I could be mistaken but there isn't really a way to "uninstall" a bootloader, just overwrite it with a different one.
unL33T is correct...just run Nue 2.47 and let it overwrite the old one. 8p
Yeah that's what I thought too, but when I tried to over right it with 2.47 the 1.20 showed up again so I used the titan_relocker tool. Maybe I did something wrong. I'll go recheck, thanks for the replies guys.
Hi all, I flashed my virgin hero with modacos 2.0 rom. Being a novice I forgot to flash the radio first.
Can I go ahead and flash the radio without wiping? I'll do a nandroid backup first anyway but if i'll lose all my settings with a radio flash i won't bother
I did that as well. Just flashed the radio on after. Worked fine. The radio update.zip only touched the radio drivers, nothing else
Cheers mate
Anyone encountered this error before? It gets to 8% and then phone reboots and I get this on my PC screen. It says Error [328] (see attached image)
I am using Radio 3.37.75 (verizon), and my bootloader shows 2.40 Olipro
Any ideas?
Try this RUU it is version 3.16.4.3.
Yes, thats the version that I am using. I think... when I run it, it says 3.16.4.3 in the window title bar. (see screen shot)
EDIT: I tried it anyways, and I got the same thing. Do I have the right bootloader? Would a different one help?
what are you trying to flash
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
wildcard said:
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
Click to expand...
Click to collapse
Just follow my post here and only use the files and Radios that I provide. Make sure you read a few times so you understand, and dont skip anything. Most important based on what I have read in this thread. Use only the radios I provide on my share site and take your time paying close attention.
http://forum.xda-developers.com/showpost.php?p=3687027&postcount=144
Thanks, I'll do it exactly like that. I will keep you posted. I have to get a new micro SD card, I only have an SDHC 8 GB
The radio can be updated via usb. I do it all the time. But it does hard reset the phone in the process.
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
I followed the directions exactly like in Ryan's post mentioned above, (used USB instead of SD card), and it works!
Fully functional. I used Radio 3.42.02 (somewhere I saw that it was recommended over the others, went with it to be safe). Then Flashed Ryan Mogul Rom 2.2 Heavy.
Thanks everyone!
drewcam888 said:
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
Click to expand...
Click to collapse
i have spl olipro-2.40, rom dcd 3.2.6 and want to upgrade radio to 3.42.50 using usb. should i downgrade spl to 1.20 before upgrade the radio? or i stick with current config and update the radio using RUU?
Still cant load radio
Obtained 6800 originally Alltel, not sure which radio, Had Olipro 2.40 installed, would hang on Alltel splash screen.
Could not get any RUU loads to complete (from USB or SD card), usually would fail around 50%.
Eventually was able to get RyanMogul 3.1 Cricket (lite) to load, but shows no radio and eventually screen goes blank. Never goes into active Sync mode.
We force boot loader mode and try and load several radios including Titan_Radio_ROM_3.42.50.Alltel.rar, Titan_Radio_ROM_3.35.04,
but keep Getting error 328 from RUU when I try to load a radio..
tried RyanMoguls "Here is a fix for GPS for all you VX6800 users that gps will not function!!", but cant run relocker because no active sync connection.
Stock Verizon ROM RUU also gets error 328.
Any ideas.