hi,
I tried to install flash player 7. but in the middle of installation it froze so had to restart.
after that my phone doesnt go past welcome screen of windows. i have wm6.5 and when starting it shows htc screen then windows gets stuck.
also i cannot connect to activesync to reflash !!!!!!!!!!!!!!!
help please.
sam1 said:
hi,
I tried to install flash player 7. but in the middle of installation it froze so had to restart.
after that my phone doesnt go past welcome screen of windows. i have wm6.5 and when starting it shows htc screen then windows gets stuck.
also i cannot connect to activesync to reflash !!!!!!!!!!!!!!!
help please.
Click to expand...
Click to collapse
solutions for you
1.just hard reset
2.enter bootloader pressing camera an power and flash other rom
Related
hi,
i've searched, and am stuck. i tried to flash a new ROM today, but it stopped at 76% and said no connection!?? i've flashed before with no problems many ROMs. I have HardSPL 1.15 mfg installed and everything always worked. Now i'm stuck at 4 color boot screen screen. HardSPL is still there, there is a message at top right saying 'RUUNBH'. I plug USB in and it says 'USB'. I run mtty but can't seem to get any CMD, or even type 'boot' in, no response on app, running on XP?
i'm reeally stuck, and had to come to work, so am worried. can anyone help??
sorry, i am still searching for solution, but please any help appreciated!!
thank you
i will try to check back often, but stuck at work might be problem ..
i got stuck at that boot screen too, but it happened during a boot image change operation. All I had to do was install a new rom.
Hope it helps...
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
badaas said:
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
Click to expand...
Click to collapse
Don't worry, you just need to get to the bootloader screen and flash again, you may have a corrupted update that may hault everytime. If it doen't work try another ROM.
Hold down power and the camera button while pressing and holding the reset button.
When you see the Boot Loader screen you can release all three.
Plug in your cable if it is not already, wait to make sure the computer installs the device and then run the ROM Update executable you want or ROMUpdateUtility.exe if everything is placed in a folder.
Note: Activesync and Mobile Device Center will not launch in this mode, and if the utility tells you to connect through activesync or Mobile Device Center ignore and continue.
OK thank you my friends, i will try when i get home from work. fingers crossed!!
cheers
thx guys, all sorted
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
try a hard reset. turn the phone off, hold down both volume buttons, and turn the phone on, keeping the vol buttons held down. then when prompted,press vol up to reset it.
yes, you'll lose any data and modifications on your phone, it will be back to how it was right after you flashed it, but at least it will start up. better than how it is now, right?
nishankyadav said:
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
Click to expand...
Click to collapse
What an utterly unfortunate situation!! Couple of questions/remarks:
1. Did you install HTC 3.14 ROM with your S/N from HTC's website before flashing Artemis?
2. You already removed HSPL, so I would advice to extract the 3.14 RUU file to your desktop and copy the custom.nbh file to your SD Card after having it renamed to leoimg.nbh (insert SD CArd into PC to do that).
3. Reinsert SD card in device and enter bootlader mode and the installation of 3.14 should start automatically.
4. After that download Artemis 43 and extract it to the folder where you're SSPL_RUU,exe resides. Bothe the custom.nbh and the SSPL file must be in the same folder!
6. Start SSPL_RUU and flash Artemis
7. After that first a hard reset and then a soft reset.
Also read page 1 - Flashing notes
This should to it for you,
regards, Kuzibri
P.S. I posted this also in Artemis thread
same problem
i've got the same problem, but i didn't install the rom artemis,
i restart the installation many time but i've got always the same problem
the display showing loading..... please wait with the chucky logo.
someone can help me???????
thank you
I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
you want the original rom from i-mate to setup in your pocket pc because your phone is locked with security you shoud make HardSPL to setup any rom on your phone
azhar63 said:
I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
Click to expand...
Click to collapse
try a hard reset (hold camera and comm manager and power) it will powers up telling you that it will format the drive.
press yes (green call key) then see if it will boot up
if not:
then do the following
http://forum.xda-developers.com/wiki/index.php?title=Prophet_recovery
For some reason the phone got unresponsive and upon power on it get's stuck on the HTC screen. I tried the reset via volume -/+ and power button, it says reset complete and when I reboot the device it get's stuck again at the boot screen on HTC.
I am not sure if I picked up the right ROM (RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_22.45.50.21_Signed_SCHUBERT_RELEASE) but when I try to flash it I get error 262.
I see SPL 5.12.2250
Can anyone help please?
Thanks in advanced.
271 view and not even one replay? really?
Same Probs for Me to Some One Pls Help Mee
You are on a Mozart forum... Schubert is HD7 And if your SPL is 5.xx try this: http://forum.xda-developers.com/showthread.php?t=1597837 or this:http://forum.xda-developers.com/showthread.php?t=1429318
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.