I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
you want the original rom from i-mate to setup in your pocket pc because your phone is locked with security you shoud make HardSPL to setup any rom on your phone
azhar63 said:
I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
Click to expand...
Click to collapse
try a hard reset (hold camera and comm manager and power) it will powers up telling you that it will format the drive.
press yes (green call key) then see if it will boot up
if not:
then do the following
http://forum.xda-developers.com/wiki/index.php?title=Prophet_recovery
Related
Hi all,
I have been upgrading the o2exec, after finishing the upgrade the device is not booting any more, it's sits on the o2 screen, I have tried the SR+Camera button combination, and it takes me to the MN2 Bootloader screen and I see the options available, which one to choose? can any one help.
Thanks
I connected the device through USB, and chose option2 but it comes back with this message "Please DSUU in OS mode and sync with PC first" Usb Transfer Fail.
The problem is that I can't boot the device, as I said before it sits on the O2 screen and doesn't do any thing.
you can try hard reset your atom exec.
i have got the same problem!
hi,
i tried freflashing the WM5 rom but got connection error while doing it and now it stuck at the bootloder mode.tried doing it all over again but the device keeps on turning off after a while and then turn on again and everytime it tuns off i get the connection error msg.tried chargin the device but theres no red lght indicator when charging..the device will keep on on and off by itself..
pls help
Charge the device (using the mains supply or a battery charger).
Start the device up, and then manually enter bootloader.
Then, follow this http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Since you can enter bootloader, it should be relatively easy to fix.
Prophet stuck at bootloader
Hello Friends...
While Trying to update my prophet rom something really wiered happened to it... after installing new roms it comes back to RGB colour screen and only shows IPL 1.00 & SPL 3.08.0001 moreover it says "Format is Failed"
is it possible for a device having G3 IPL and G4 SPL ?...
Please Help me out what should i do now ?...
hi,
i've searched, and am stuck. i tried to flash a new ROM today, but it stopped at 76% and said no connection!?? i've flashed before with no problems many ROMs. I have HardSPL 1.15 mfg installed and everything always worked. Now i'm stuck at 4 color boot screen screen. HardSPL is still there, there is a message at top right saying 'RUUNBH'. I plug USB in and it says 'USB'. I run mtty but can't seem to get any CMD, or even type 'boot' in, no response on app, running on XP?
i'm reeally stuck, and had to come to work, so am worried. can anyone help??
sorry, i am still searching for solution, but please any help appreciated!!
thank you
i will try to check back often, but stuck at work might be problem ..
i got stuck at that boot screen too, but it happened during a boot image change operation. All I had to do was install a new rom.
Hope it helps...
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
badaas said:
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
Click to expand...
Click to collapse
Don't worry, you just need to get to the bootloader screen and flash again, you may have a corrupted update that may hault everytime. If it doen't work try another ROM.
Hold down power and the camera button while pressing and holding the reset button.
When you see the Boot Loader screen you can release all three.
Plug in your cable if it is not already, wait to make sure the computer installs the device and then run the ROM Update executable you want or ROMUpdateUtility.exe if everything is placed in a folder.
Note: Activesync and Mobile Device Center will not launch in this mode, and if the utility tells you to connect through activesync or Mobile Device Center ignore and continue.
OK thank you my friends, i will try when i get home from work. fingers crossed!!
cheers
thx guys, all sorted
hi,
I tried to install flash player 7. but in the middle of installation it froze so had to restart.
after that my phone doesnt go past welcome screen of windows. i have wm6.5 and when starting it shows htc screen then windows gets stuck.
also i cannot connect to activesync to reflash !!!!!!!!!!!!!!!
help please.
sam1 said:
hi,
I tried to install flash player 7. but in the middle of installation it froze so had to restart.
after that my phone doesnt go past welcome screen of windows. i have wm6.5 and when starting it shows htc screen then windows gets stuck.
also i cannot connect to activesync to reflash !!!!!!!!!!!!!!!
help please.
Click to expand...
Click to collapse
solutions for you
1.just hard reset
2.enter bootloader pressing camera an power and flash other rom
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
try a hard reset. turn the phone off, hold down both volume buttons, and turn the phone on, keeping the vol buttons held down. then when prompted,press vol up to reset it.
yes, you'll lose any data and modifications on your phone, it will be back to how it was right after you flashed it, but at least it will start up. better than how it is now, right?
nishankyadav said:
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
Click to expand...
Click to collapse
What an utterly unfortunate situation!! Couple of questions/remarks:
1. Did you install HTC 3.14 ROM with your S/N from HTC's website before flashing Artemis?
2. You already removed HSPL, so I would advice to extract the 3.14 RUU file to your desktop and copy the custom.nbh file to your SD Card after having it renamed to leoimg.nbh (insert SD CArd into PC to do that).
3. Reinsert SD card in device and enter bootlader mode and the installation of 3.14 should start automatically.
4. After that download Artemis 43 and extract it to the folder where you're SSPL_RUU,exe resides. Bothe the custom.nbh and the SSPL file must be in the same folder!
6. Start SSPL_RUU and flash Artemis
7. After that first a hard reset and then a soft reset.
Also read page 1 - Flashing notes
This should to it for you,
regards, Kuzibri
P.S. I posted this also in Artemis thread
same problem
i've got the same problem, but i didn't install the rom artemis,
i restart the installation many time but i've got always the same problem
the display showing loading..... please wait with the chucky logo.
someone can help me???????
thank you